ADVANCED PULLDOWN REMOVAL - Problem with 60 Hours of Material

After I capture about 60 hours of material and worked for the past 3 months in a 90 minutes documentary I realized that the material was shoot in 24P advanced and was not captured in advanced pulldown removal mode! What should I do now? Should I do an online of the 90 min sequence with advance pulldown removal? What should I expect to happen? Thanks a lot in advance for your help.

I am delivering an EDL to do an online in HD for later on blow it up to 35mm. I just don't want to fix problems in the online because it'll take time therefore MONEY. I was thinking on recapturing the master sequence in my machines at advanced pulldown removal, fix any problems and then export the EDL to go to the online.
Dual 2 GHz G5; 4.0 GB RAM, Mac OS X (10.4.8) Dual 2 GHz G5; 2.0 GB RAM,

Similar Messages

Advance pulldown removal problem

There is a bit of info i've found about similar issues but nothing covers my scenario. I captured dvx100a 24pa footage-- but without the advance pulldown removal selected. The clips therefore all had frame rates of 29.97. I then went to tools and added the "*remove advance pulldown*".
Two different things happened to my clips. It's corrupting some clips and not others. Some worked and changed to 23.98 fps. Others instantly went offline and when I tried to reconnect the media from the capture scratch I get this:
"*File Error: 1 file(s) recognized, 0 access denied, 1 unknown*" and I can't reconnect the media--that still plays fine in quicktime from the capture scratch. I have to re-digitize all the random clips that this happens to.
I'm wondering if it might be a fps and timecode issue-- or a codec issue. Any ideas would be greatly appreciated.
thanks.

Think I figured it out. There was a duplicate folder with the media files on two hard drives and FCP may have been trying to reference both. Deleted one folder and files went offline then when i reconnected the media and applied "remove advance pulldown" it worked this time.

Audio goes missing after advanced pulldown removal

Anybody come across this? I can't find anything in the forum about it.
I shot 24pAdvanced on my DVX-100A. Captured everything as 29.97 NTSC DV in 20 min segments. I do a DV Start/Stop Detect to get markers placed, then do an advanced pulldown removal and edit on 23.98 timeline. I've got about 100 hours of footage, and have been going along quite smoothly on about 80 of those hours.
Recently however, some clips mysteriously lose their audio after the pulldown removal! Both audio tracks are still there, but they are flatlined. All except for the first 4 or 5 seconds actually. That much audio is present. Then the waveforms show it just flatline. Recapturing the tape replaces the audio, but then it disappears after the pulldown again!
Any thoughts would be welcome
2GHz Mac Book Pro Mac OS X (10.4.8) 1.5 GB RAM, FCP 5.1.2, 23" HD monitor

I am delivering an EDL to do an online in HD for later on blow it up to 35mm. I just don't want to fix problems in the online because it'll take time therefore MONEY. I was thinking on recapturing the master sequence in my machines at advanced pulldown removal, fix any problems and then export the EDL to go to the online.
Dual 2 GHz G5; 4.0 GB RAM, Mac OS X (10.4.8) Dual 2 GHz G5; 2.0 GB RAM,

Problem with replication based on materialized view

Problem with replication based on materialized view...
Given:
1. Source: S-1
2. Targets: T-1, T-2
3. DB links: from T-1 to S-1, from T-2 to S-1
Required replicate table TBL on S-1 to T-1, T-2 via db links.
On S-1 was created materialized view log with PK on TBL. On T-1, T-2 were created mat.views as "on prebuilt table refresh fast on demand". In case of get "ORA-12034: materialized view log younger than last refresh" or initial load - perform complete refresh. Initial load on T-1 takes about 1 hour, on T-2 - about 12 hours. Refresh is executed via job with minutely interval. If refresh is running then it is not performed.
Problem: after initial load on T-1 performs fast refresh, but on T-2 raised ORA-12034 and complete performs again.
What's wrong?

34MCA2K2, Google lover?
I confess perhaps I gave a little info.
View log was created before MV.
It was the first initial load.
No refresh failed.
No DDL.
No purge log.
Not warehouse.
There is no such behavior for MVs on another sites.
P.S. I ask help someone who knows what's wrong or who faced with it or can me follow by usefull link.
P.P.S. It's a pity that there is no button "Useless answer"

Problems with reference field in material type

Hi,
I have problem with field reference in material type creation.
When I define a self-defined field reference ZERS (copy of standard field reference HERS) for a own defined material type ZERS (copy of material type HERS), I get the following error message:
Field reference ZERS has not been set up
Message no. CZ127
Diagnosis
You have specified a field reference that has not been set up.
Procedure
Set up the new field reference or use an already existing field reference.
I do not understand why because the entry ZERS is present in table T130A.
Here is the IMG config I have made:
1. Logistics general->Material Master->Field selection->Maintain field selection for Data Screens (here I made copy of field reference HERS and named it ZERS)
2. Logistics general->Material Master->Basic Settings->Material types->Define attributes of Material types (here I made a copy of material type HERS and named it ZERS. I then tried to set the field T134-FLREF "Field reference" to ZERS, but then the error message appears)
Does anyone know what config I am missing?
Or any reason why the error message CZ127 is coming up?
Thanks

Must have been system error, I deleted all entries and did it all over again, it worked.

Advanced Pulldown Removal

Why can I not always capture APR in Final Cut 5 when it is selected in the capture settings? This applies to batch capturing or capturing on the fly.
Is it a buggy program or is there something I should know?

The only times I've had problems with this is if I've captured multiple formats on one tape and my batch is too close to the other format. I mean, if the run-up is starting in the odd format.
I'd hate to say go in and capture one at a time... then make sure the pulldown was removed and if not, do it manually... under TOOLS.
CaptM

Problem with Wifi, hour and automatic stop and reignition of an iPod Touch 5G

Hello, yesterday, I encountered a problem with my iPod Touch 5G on iOS 7.0.4, the time and the hour jumps, and sometimes, it off and on by itself.
I've tried to restore it but it doesn't change anything.
cordially

- Try DFU mode and then restore to factory settings/new iPod
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Advance level drawing problem with Jframe and JPanel need optimize sol?

Dear Experts,
I m trying to create a GUI for puzzle game following some kind of "game GUI template", but i have problems in that,so i tried to implement that in various ways after looking on internet and discussions about drawing gui in swing, but i have problem with both of these, may be i m doing some silly mistake, which is still out of my consideration. please have a look at these two and recommend me one of them, which is running without problems (flickring and when you enlarge window the board draw copies (tiled) everywhere,
Note: i don't want to inherit jpanel or Jframe
here is my code : import java.awt.BorderLayout;
public class GameMain extends JFrame {
     private static final long serialVersionUID = 1L;
     public int mX, mY;
     int localpoints = 0;
     protected static JTextField[][] squares;
     protected JLabel statusLabel = new JLabel("jugno");
     Label lbl_score = new Label("score");
     Label lbl_scorelocal = new Label("local score");
     protected static TTTService remoteTTTBoard;
     // Define constants for the game
     static final int CANVAS_WIDTH = 800; // width and height of the game screen
     static final int CANVAS_HEIGHT = 600;
     static final int UPDATE_RATE = 4; // number of game update per second
     static State state; // current state of the game
     private int mState;
     // Handle for the custom drawing panel
     private GameCanvas canvas;
     // Constructor to initialize the UI components and game objects
     public GameMain() {
          // Initialize the game objects
          gameInit();
          // UI components
          canvas = new GameCanvas();
          canvas.setPreferredSize(new Dimension(CANVAS_WIDTH, CANVAS_HEIGHT));
          this.setContentPane(canvas);
          this.setDefaultCloseOperation(EXIT_ON_CLOSE);
          this.pack();
          this.setTitle("MY GAME");
          this.setVisible(true);
     public void gameInit() {
     // Shutdown the game, clean up code that runs only once.
     public void gameShutdown() {
     // To start and re-start the game.
     public void gameStart() {
     private void gameLoop() {
     public void keyPressed(KeyEvent e) {
     public void keyTyped(KeyEvent e) {
     public void gameKeyReleased(KeyEvent e) {
          PuzzleBoard bd = getBoard();
          for (int row = 0; row < 4; ++row) {
               for (int col = 0; col < 4; ++col) {
                    if (e.getSource() == squares[row][col]) {
                         if (bd.isOpen(col, row)) {
                              lbl_score.setText("Highest Score = "
                                        + Integer.toString(bd.getPoints()));
                              setStatus1(bd);
                              pickSquare1(col, row, squares[row][col].getText()
                                        .charAt(0));
     protected void pickSquare1(int col, int row, char c) {
          try {
               remoteTTTBoard.pick(col, row, c);
          } catch (RemoteException e) {
               System.out.println("Exception: " + e.getMessage());
               e.printStackTrace();
               System.exit(1);
     // method "called" by remote object to update the state of the game
     public void updateBoard(PuzzleBoard new_board) throws RemoteException {
          String s1;
          for (int row = 0; row < 4; ++row) {
               for (int col = 0; col < 4; ++col) {
                    squares[row][col].setText(new_board.ownerStr(col, row));
          lbl_score.setText("Highest Score = "
                    + Integer.toString(new_board.getPoints()));
          setStatus1(new_board);
     protected void setStatus1(PuzzleBoard bd) {
          boolean locals = bd.getHave_winner();
          System.out.println("local win" + locals);
          if (locals == true) {
               localpoints++;
               System.out.println("in condition " + locals);
               lbl_scorelocal.setText("Your Score = " + localpoints);
          lbl_score
                    .setText("Highest Score = " + Integer.toString(bd.getPoints()));
     protected PuzzleBoard getBoard() {
          PuzzleBoard res = null;
          try {
               res = remoteTTTBoard.getState();
          } catch (RemoteException e) {
               System.out.println("Exception: " + e.getMessage());
               e.printStackTrace();
               System.exit(1);
          return res;
     /** Custom drawing panel (designed as an inner class). */
     class GameCanvas extends JPanel implements KeyListener {
          /** Custom drawing codes */
          @Override
          public void paintComponent(Graphics g) {
               // setOpaque(false);
               super.paintComponent(g);
               // main box; everything placed in this
               // JPanel box = new JPanel();
               setLayout(new BoxLayout(this, BoxLayout.Y_AXIS));
               // add(statusLabel, BorderLayout.NORTH);
               // set up the x's and o's
               JPanel xs_and_os = new JPanel();
               xs_and_os.setLayout(new GridLayout(5, 5, 0, 0));
               squares = new JTextField[5][5];
               for (int row = 0; row < 5; ++row) {
                    for (int col = 0; col < 5; ++col) {
                         squares[row][col] = new JTextField(1);
                         squares[row][col].addKeyListener(this);
                         if ((row == 0 && col == 1) || (row == 2 && col == 3)
                         || (row == 1 && col == 4) || (row == 4 && col == 4)
                                   || (row == 4 && col == 0))
                              JPanel p = new JPanel(new BorderLayout());
                              JLabel label;
                              if (row == 0 && col == 1) {
                                   label = new JLabel("1");
                                   label.setHorizontalAlignment(JLabel.LEFT);
                                   label.setVerticalAlignment(JLabel.TOP);
                              else if (row == 4 && col == 0) {// for two numbers or
                                   // two
                                   // blank box in on row
                                   label = new JLabel("2");
                                   label.setHorizontalAlignment(JLabel.LEFT);
                                   label.setVerticalAlignment(JLabel.TOP);
                              else if (row == 1 && col == 4) {
                                   label = new JLabel("3");
                                   label.setHorizontalAlignment(JLabel.LEFT);
                                   label.setVerticalAlignment(JLabel.TOP);
                              else if (row == 4) {
                                   label = new JLabel("4");
                                   label.setHorizontalAlignment(JLabel.LEFT);
                                   label.setVerticalAlignment(JLabel.TOP);
                              else {
                                   label = new JLabel("5");
                                   label.setHorizontalAlignment(JLabel.LEFT);
                                   label.setVerticalAlignment(JLabel.TOP);
                              label.setOpaque(true);
                              label.setBackground(squares[row][col].getBackground());
                              label.setPreferredSize(new Dimension(label
                                        .getPreferredSize().width, squares[row][col]
                                        .getPreferredSize().height));
                              p.setBorder(squares[row][col].getBorder());
                              squares[row][col].setBorder(null);
                              p.add(label, BorderLayout.WEST);
                              p.add(squares[row][col], BorderLayout.CENTER);
                              xs_and_os.add(p);
                         } else if ((row == 2 && col == 1) || (row == 1 && col == 2)
                                   || (row == 3 && col == 3) || (row == 0 && col == 3)) {
                              xs_and_os.add(squares[row][col]);
                              // board[ row ][ col ].setEditable(false);
                              // board[ row ][ col ].setText("");
                              squares[row][col].setBackground(Color.RED);
                              squares[row][col].addKeyListener(this);
                         } else {
                              squares[row][col] = new JTextField(1);
                              // squares[row][col].addActionListener(this);
                              squares[row][col].addKeyListener(this);
                              xs_and_os.add(squares[row][col]);
               this.add(xs_and_os);
               this.add(statusLabel);
               this.add(lbl_score);
               this.add(lbl_scorelocal);
          public void keyPressed(KeyEvent e) {
          public void keyReleased(KeyEvent e) {
               gameKeyReleased(e);
          public void keyTyped(KeyEvent e) {
     // main
     public static void main(String[] args) {
          SwingUtilities.invokeLater(new Runnable() {
               @Override
               public void run() {
                    new GameMain();
thanks a lot for your time , consideration and efforts.
jibby
Edited by: jibbylala on Sep 20, 2010 6:06 PM

jibbylala wrote:
thanks for mentioning as i wasn't able to write complete context here.Yep thanks camickr. I think that Darryl's succinct reply applies here as well.

Problem with mass IDoc for Material Master

Hi All,
Can anyone suggest a solution to work with mass IDocs for Material master?
We have DEBMDM and CREMDM as mass capable IDocs for Customer and Vendor. How do we get mass Material Master IDocs from R/3 in a single XML file?
Also the standard Material repository supplied with SAP MDM 5.5 SP3 doesn't have any XSD definition for MATMDM. Can anyone throw some light on this problem?
Regards
Pooja

Hello Pooja:
The standard way to do it is to generate a single file containing multiple idocs (And for the sake of performance, I suggest you stick to this technique).
In the case of material master, everything is straight forward. In the case of customer and vendor master, when data flows from R/3 to MDM no idoc conversion needs to be performed by XI.
However, for the case of customer and vendor master, when data flows from MDM to R/3, XI needs to separate the data in CREMDM to CREMAS and ADRMAS in order for R/3 to be able to process the idocs; as well as separate the data in DEBMDM to DEBMAS and ADRMAS.
The good thing is that you do not need to worry about all this mappings and conversions in XI. The only thing you need to do in XI is to import the standard business content for SAP MDM 5.5 into XI.
Hope this helps.
Regards,
Jorge.

Diff between 23.98 & 23.98 advanced pulldown removal?

kind of confused here, I understand that 23.98 advanced will allow you to edit true 23.98 progressive frames, and if you just use dv 29.97 to import 23.98 footage, it will also work if you want to mix 23.98 and 29.97 footage.....but what is the 23.98 capture preset?

You must have a complicated job dealing with all these different formats and editing routines. I've managed to setup our ad agency as a single-room facility to negate the need for so much transfering, onlining and offlining and other garbage workflows.
But on to your question. I'm a bit confused about the pulldown getting added twice, but OK. A simpler way to avoid it is to keep the DVD content 24P all the time. All DVD Players prefer 24P streams over 60i with pulldown since they can output progressive footage this way. Sending your footage out the kona to a DVD recorder may have seemed simpler, but it just messed things up.
It might have been easier to just make the QT master file in 24P and send it to compressor to make a 24P MPEG 2 stream, than DVD Studio Pro it.
As for your timecode problems, I'm not sure how to help you since most of my workflow (thanks to the one-room setup) makes 99% of timecode unnecessary.

Synonym problem with external table in materialized view

I have a materialized view that includes selects on two external tables.
However, no matter how I try to access the external tables, the creation fails with a "Synonym Translation Is No Longer Valid" (ORA-00980) error.
This happens even when I replace the tablename with the full table name, including the link.
I can create a view just fine, but if I then try something like CREATE MATERIALIZED VIEW mvw_my_view AS SELECT * FROM vw_my_view (where vw_my_view is the view in question), it still throws the Synonym Translation exception.

00980, 00000, "synonym translation is no longer valid"
// *Cause: A synonym did not translate to a legal target object. This
//         could happen for one of the following reasons:
//         1. The target schema does not exist.
//         2. The target object does not exist.
//         3. The synonym specifies an incorrect database link.
//         4. The synonym is not versioned but specifies a versioned
//            target object.
// *Action: Change the synonym definition so that the synonym points at
//          a legal target object.It is really, Really, REALLY difficult to fix a problem that can not be seen.
use COPY & PASTE so we can see what you do & how Oracle responds.

Problem with queries while refreshing materialized views

We are in oracle 8.1.7. We have some materialized views that are refreshed with DMBS_REFRESH.REFRESH in a Job. The problem is that when the refresh occurs while a query is executing we get a "Invalid Rowid" or "0RA-08103 Object not longer exists" in the session executing the query.
We already have reproduced the problem. Is this a bug ? Any idea?
Thanks.

Check if the objects referred in the MV defination has undergone any reorg recently.

Problems with DP80 for 1 material using 3 times in Service order

Hi,
in an service order we use 1 material sereral times:
Materia: 4711 10ST
Materia: 4711 20ST
Materia: 4711 30ST
When using DP80 i get 4711 60ST.
Is there any way to get 4711 3 times with 10, 20 and 30 ST ?
I have done a lot of changes with ODP1 but not effect.
Has anyone an idea?
Regards, Dieter

Hi,
thanks for your answer, but it doesn't work.
In material determination i have set Material direct.
On Characteristic i have set Cost center and Cost Element with CharactRelevant and SóSummarization.
Regards, Dieter

Problem with Accounting view in Material Master

Hi,
One of the material master does not have the accounting view and the costing views attached to it. When trying to extend the views thru MM01, the system shows the following message -
Material already maintained for this Transaction/event
What we understood is that the views were already extended earlier but still does not show up.
Any help extended is highly appreciated.
Regards,
Mike
Edited by: Michael Gerard Leo on Mar 10, 2009 4:35 PM

Hi,
After we extended the accounting view in MM01 for a particular plant and saved it, we are not able to view it through MM02 or MM03.
Again, if we try to extend the view for the same plant in MM01, the system gives an error message that it is already extended.
Any reasons why the accounting views are not showing up in MM02 and MM03.
Regards,
Mike

Problems with artifacting when importing clip from After Effects...

I have spent nearly 100 hours creating some effects in After effects within the last few weeks but have noticed some terrible verticle artifacting when I import them into FCP. I have tried exporting using Uncompressed quicktime codec as well as DVCPro/DV and the "none" option with the best quality settings(all using the same FPS) and it still creates these verticle lines. I have also tried not only using the settings for anamorphic(720x480) but exporting with naitive 16x9 (which I believe is 856x480)and still get these lines.
I need help please!! I am stumped on this one. Even when viewing the files outside of FCP using the Quicktime player the footage looks perfect.
I would appreciate any help!
Thanks,
Andrew

My FCP settings are 24p advanced pulldown removed using DVCpro/DV 16x9.
I have exported using the same settings with the after effects codec to a .mov and still get the problem.
I am not viewing on an external monitor, only on the canvas. Could this just be a display issue?
Thanks
Andrew

ADVANCED PULLDOWN REMOVAL - Problem with 60 Hours of Material

Similar Messages

Maybe you are looking for