Advanced Security Application

I've started testing the Cisco OnPlus Advanced Security Application.  It states that it is free for a limited time.  However I don't see how long that "limited time" is and I also don't see any information about costs, skus, etc. for maintaining the subscription.  Any assistance would be appreciated.  Thank you.                  

As an update to this, I spoke with some of my contacts at Cisco.  From what I understand, there aren't currently any plans to make the Cisco OnPlus Advanced Security Application a "pay for" service.  It might be one day but at this time it should continue to work without expiration.

Similar Messages

  • Error while running a Secured Application

    Hi all,
    we have created an application with a single page, which works fine when we run the same. But if security is enabled for the application, following exception is being thrown:
    <Mar 9, 2011 4:17:51 PM IST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1299667669178' for task '2'. Error is: 'java.lang.NoSuchFieldError: RESOURCE_NAME_EXPRESSION'
    java.lang.NoSuchFieldError: RESOURCE_NAME_EXPRESSION
    at oracle.security.jps.internal.policystore.entitymanager.impl.PermissionSetManagerImpl.getResourceNameExpressionQuery(PermissionSetManagerImpl.java:2448)
    at oracle.security.jps.internal.policystore.entitymanager.impl.PermissionSetManagerImpl.checkPermissionSetSearchQuery(PermissionSetManagerImpl.java:2464)
    at oracle.security.jps.internal.policystore.entitymanager.impl.PermissionSetManagerImpl.getPermissionSets(PermissionSetManagerImpl.java:2414)
    at oracle.security.jps.internal.tools.utility.destination.apibased.JpsDstPolicy.clone(JpsDstPolicy.java:935)
    at oracle.security.jps.internal.tools.utility.destination.apibased.JpsDstPolicy.migrateData(JpsDstPolicy.java:442)
    Truncated. see log file for complete stacktrace
    Caused By: java.lang.NoSuchFieldError: RESOURCE_NAME_EXPRESSION
    at oracle.security.jps.internal.policystore.entitymanager.impl.PermissionSetManagerImpl.getResourceNameExpressionQuery(PermissionSetManagerImpl.java:2448)
    at oracle.security.jps.internal.policystore.entitymanager.impl.PermissionSetManagerImpl.checkPermissionSetSearchQuery(PermissionSetManagerImpl.java:2464)
    at oracle.security.jps.internal.policystore.entitymanager.impl.PermissionSetManagerImpl.getPermissionSets(PermissionSetManagerImpl.java:2414)
    at oracle.security.jps.internal.tools.utility.destination.apibased.JpsDstPolicy.clone(JpsDstPolicy.java:935)
    at oracle.security.jps.internal.tools.utility.destination.apibased.JpsDstPolicy.migrateData(JpsDstPolicy.java:442)
    Truncated. see log file for complete stacktrace
    >
    <Mar 9, 2011 4:17:51 PM IST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'DSDemo [Version=V2.0]'.>
    <Mar 9, 2011 4:17:51 PM IST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
    java.lang.NoSuchFieldError: RESOURCE_NAME_EXPRESSION
    at oracle.security.jps.internal.policystore.entitymanager.impl.PermissionSetManagerImpl.getResourceNameExpressionQuery(PermissionSetManagerImpl.java:2448)
    at oracle.security.jps.internal.policystore.entitymanager.impl.PermissionSetManagerImpl.checkPermissionSetSearchQuery(PermissionSetManagerImpl.java:2464)
    at oracle.security.jps.internal.policystore.entitymanager.impl.PermissionSetManagerImpl.getPermissionSets(PermissionSetManagerImpl.java:2414)
    at oracle.security.jps.internal.tools.utility.destination.apibased.JpsDstPolicy.clone(JpsDstPolicy.java:935)
    at oracle.security.jps.internal.tools.utility.destination.apibased.JpsDstPolicy.migrateData(JpsDstPolicy.java:442)
    Truncated. see log file for complete stacktrace
    Caused By: java.lang.NoSuchFieldError: RESOURCE_NAME_EXPRESSION
    at oracle.security.jps.internal.policystore.entitymanager.impl.PermissionSetManagerImpl.getResourceNameExpressionQuery(PermissionSetManagerImpl.java:2448)
    at oracle.security.jps.internal.policystore.entitymanager.impl.PermissionSetManagerImpl.checkPermissionSetSearchQuery(PermissionSetManagerImpl.java:2464)
    at oracle.security.jps.internal.policystore.entitymanager.impl.PermissionSetManagerImpl.getPermissionSets(PermissionSetManagerImpl.java:2414)
    at oracle.security.jps.internal.tools.utility.destination.apibased.JpsDstPolicy.clone(JpsDstPolicy.java:935)
    at oracle.security.jps.internal.tools.utility.destination.apibased.JpsDstPolicy.migrateData(JpsDstPolicy.java:442)
    Truncated. see log file for complete stacktrace
    >
    [04:17:51 PM] #### Deployment incomplete. ####
    Any help on this regard would be greatly appreciated.
    Thanks in advance,
    Raghu

    Hi,
    By secured application, i mean, i have configured security in the Application and ran it in the jdev. The same app was running smoothly without enabling the security.
    Thanks,
    Raghu

  • Command to set modify Advanced Security Settings (Audit Settings for folders) on windows 2008

    Hello,
    We have requirement to modify  Advanced Security Settings (Audit Settings for folders) on windows 2008. I am looking for a command which does this job.
    I know, using group policies I can do this; in fact I had done this using group policies. However, I need to do this on number of servers which are not in domain. There are around 15 folders on which I need to enable Auditing; manual editing folder advanced
    permissions is a cumbersome job. Hence, I am looking for a command line options.
    I need to know how command can be utilised to enable Audit option on a folder. Please share a command which can do this; once I get the command, I will create a batch file for other necessary folders. (BTW, this is not a scripting question, I just need to
    know the command hence, please do not re-direct me to scripting forum)
    Manually through GUI, I am setting following.. snaps are given below
    Thanks !

    You can try using Auditpol.exe: http://technet.microsoft.com/en-us/library/cc731451%28v=ws.10%29.aspx
    This
    posting is provided "AS IS" with no warranties or guarantees , and confers no rights.   
    Microsoft
    Student Partner 2010 / 2011
    Microsoft
    Certified Professional
    Microsoft
    Certified Systems Administrator: Security
    Microsoft
    Certified Systems Engineer: Security
    Microsoft
    Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
    Microsoft
    Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
    Microsoft
    Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
    Microsoft
    Certified Technology Specialist: Windows 7, Configuring
    Microsoft
    Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
    Microsoft Certified IT Professional: Enterprise Administrator
    Microsoft Certified IT Professional: Server Administrator
    Microsoft Certified Trainer
    Thanks but I guess, auditpol ca be used only to manipulate system audit policies. how do I specify a folder and user in auditpol ? I could not find or understand how folder can be included with auditpol command line options.
    Thanks !

  • Oracle advanced security problem

    I have the following situation:
    Oracle 10.2.0.2.0 database running on RHEL 3.0
    Oracle advanced security is installed
    sqlnet.ora on the server
    # sqlnet.ora Network Configuration File: c:\oracle\NETWORK\ADMIN\sqlnet.ora
    # Generated by Oracle configuration tools.
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
    # This file is actually generated by netca. But if customers choose to
    # install "Software Only", this file wont exist and without the native
    # authentication, they will not be able to connect to the database on NT.
    SQLNET.CRYPTO_SEED = 'gkjhkh987987979'
    SQLNET.CRYPTO_CHECKSUM_TYPES_SERVER= (MD5)
    SQLNET.CRYPTO_CHECKSUM_SERVER = required
    SQLNET.ENCRYPTION_TYPES_SERVER= (DES40, DES, 3DES112)
    SQLNET.ENCRYPTION_SERVER = required
    #SQLNET.CRYPTO_CHECKSUM_TYPES_CLIENT= (MD5)
    #SQLNET.CRYPTO_CHECKSUM_CLIENT = accepted
    #SQLNET.ENCRYPTION_TYPES_CLIENT = ("DES40,DES")
    #SQLNET.ENCRYPTION_CLIENT = accepted
    On the client I have two homes
    1. Oracle 10g client
    I can connect to the database even if there is no crypto and checksum types specified.
    2. Application which is using oracle 8 client
    if there are no crypto and checksum types I get
    ORA-12660: Encryption or crypto-checksumming parameters incompatible
    Cause: One side of the connection specified "REQUIRED" for encryption or crypto-checksumming, while the other side specified "REJECTED".
    if the slqnet.ora is
    # sqlnet.ora Network Configuration File: c:\oracle\NETWORK\ADMIN\sqlnet.ora
    # Generated by Oracle configuration tools.
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
    # This file is actually generated by netca. But if customers choose to
    # install "Software Only", this file wont exist and without the native
    # authentication, they will not be able to connect to the database on NT.
    SQLNET.CRYPTO_SEED = 'gkjhkh987987979'
    #SQLNET.CRYPTO_CHECKSUM_TYPES_SERVER= (MD5)
    #SQLNET.CRYPTO_CHECKSUM_SERVER = required
    #SQLNET.ENCRYPTION_TYPES_SERVER= (DES40, DES, 3DES112)
    #SQLNET.ENCRYPTION_SERVER = required
    SQLNET.CRYPTO_CHECKSUM_TYPES_CLIENT= (MD5)
    SQLNET.CRYPTO_CHECKSUM_CLIENT = accepted
    SQLNET.ENCRYPTION_TYPES_CLIENT = ("DES40,DES")
    SQLNET.ENCRYPTION_CLIENT = accepted
    I get
    ORA-12649: Unknown encryption or data integrity algorithm
    Cause: An Oracle Advanced Security list-of-algorithms parameter included an algorithm name that was not recognized.
    Any Ideas?

    I have the following situation:
    Oracle 10.2.0.2.0 database running on RHEL 3.0
    Oracle advanced security is installed
    sqlnet.ora on the server
    # sqlnet.ora Network Configuration File: c:\oracle\NETWORK\ADMIN\sqlnet.ora
    # Generated by Oracle configuration tools.
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
    # This file is actually generated by netca. But if customers choose to
    # install "Software Only", this file wont exist and without the native
    # authentication, they will not be able to connect to the database on NT.
    SQLNET.CRYPTO_SEED = 'gkjhkh987987979'
    SQLNET.CRYPTO_CHECKSUM_TYPES_SERVER= (MD5)
    SQLNET.CRYPTO_CHECKSUM_SERVER = required
    SQLNET.ENCRYPTION_TYPES_SERVER= (DES40, DES, 3DES112)
    SQLNET.ENCRYPTION_SERVER = required
    #SQLNET.CRYPTO_CHECKSUM_TYPES_CLIENT= (MD5)
    #SQLNET.CRYPTO_CHECKSUM_CLIENT = accepted
    #SQLNET.ENCRYPTION_TYPES_CLIENT = ("DES40,DES")
    #SQLNET.ENCRYPTION_CLIENT = accepted
    On the client I have two homes
    1. Oracle 10g client
    I can connect to the database even if there is no crypto and checksum types specified.
    2. Application which is using oracle 8 client
    if there are no crypto and checksum types I get
    ORA-12660: Encryption or crypto-checksumming parameters incompatible
    Cause: One side of the connection specified "REQUIRED" for encryption or crypto-checksumming, while the other side specified "REJECTED".
    if the slqnet.ora is
    # sqlnet.ora Network Configuration File: c:\oracle\NETWORK\ADMIN\sqlnet.ora
    # Generated by Oracle configuration tools.
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
    # This file is actually generated by netca. But if customers choose to
    # install "Software Only", this file wont exist and without the native
    # authentication, they will not be able to connect to the database on NT.
    SQLNET.CRYPTO_SEED = 'gkjhkh987987979'
    #SQLNET.CRYPTO_CHECKSUM_TYPES_SERVER= (MD5)
    #SQLNET.CRYPTO_CHECKSUM_SERVER = required
    #SQLNET.ENCRYPTION_TYPES_SERVER= (DES40, DES, 3DES112)
    #SQLNET.ENCRYPTION_SERVER = required
    SQLNET.CRYPTO_CHECKSUM_TYPES_CLIENT= (MD5)
    SQLNET.CRYPTO_CHECKSUM_CLIENT = accepted
    SQLNET.ENCRYPTION_TYPES_CLIENT = ("DES40,DES")
    SQLNET.ENCRYPTION_CLIENT = accepted
    I get
    ORA-12649: Unknown encryption or data integrity algorithm
    Cause: An Oracle Advanced Security list-of-algorithms parameter included an algorithm name that was not recognized.
    Any Ideas?

  • Information required in "Advanced Security in Oracle 8i"

    Dear All,
    We are planning to secure our database by using Oracle Advanced Security option.My concern is that I have one central database for my main application. Some modules require security while the rest do not need that.
    Can I secure some schemas of database by leaving other schemas unsecure ? I mean can I apply security option to one schema and not to the other of same database?
    Anyone who can give solution to the above problem will be highly appreciated.
    Waiting for quick response.
    Regards
    Mehdi

    Hi Mehdi ,
    You can check out the VPD concept provided by Oracle in which you can apply the security on the required schema/table only and it thus meet your requirement of providing security option to one schema and not to the other of same database.
    -Shefali
    null

  • Enterpise User Security, OID and Oracle Advanced Security

    Do we also need Oracle Advanced Security when using the OID
    solution (Oracle Application Server)? I just seem to remember
    coming across something where some portion of the LDAP directory
    needed to communicate over SSL, and I wasn't sure if this
    implied that Oracle Advanced Security was needed.
    Thanks.

    Hi!
    As long as you use the LDAP via SSL purely in the Application Server then there is no need for Advanced Security.
    As you mentioned Enterprise Users - which is a database user authenticated by the OID, you will need the Advanced Security option.
    cu
    Andreas

  • Advanced Security Server /Entrust-enabled SSL

    We are expermenting to configure Advanced Security Server to work with Entrust. I had a quick look on Oracle 9i Advanced Security Server /Administrators Guide, and found a lot more detailed instructions about configuring Entrust-enabled SSL.. In addition, there are samples of how sqlnet.ora will look like. The question: Can we use 9i manual to configure Entrust-enabled SSL for Oracle 817? If we can't use the 9i manual, is there any addendum document to the Chapter 10-Enabling Entrust
    Authentication in Oracle8i Advanced Security Administrators Guide, other than CR #281745 ....
    null

    Hi Justin,
    The Visual Basic application software uses Oracle OLEDB Provider 9.2.0.7.0
    We use various classes available in OLEDB for acessing the database. For example, the connection string looks like the following:
    Provider=oraoledb.oracle; data source=oraserve; user id=myuserid; password=mypasswd;
    The application uses ADODB objects to access data.
    Hope this clarifies
    Regards,
    SAM

  • Why is Gmail asking me to Disable advanced security so I can use Thunderbird?

    I could not add a new Gmail account to Thunderbird until I disabled advanced security. How do I get this advanced security back? And, do my older Gmail accounts not have this advanced security for now?
    Mike

    Google changed their settings for Mail clients, you must Enabled the "Less secure apps"
    Info on enabling less secure apps:
    https://support.google.com/accounts/answer/6010255
    Otherwise:
    Two step verification and application specific passwords:
    The Google Account help advocates using two step authentication. That sends a code (a minimum of once a month but ideally every time you log in) to your cell phone that you need to enter when logging in using a browser.
    However applications such as email clients can't do that.
    If you configure two step verification you need to create an application specific password for Thunderbird that you use instead of the normal password. The application specific password doesn't change when a new code is sent to your cell phone.
    More info on setting up 2 step verification and creating the application specific pasword which you would then need to use in Thunderbird:
    https://support.google.com/mail/answer/1173270?hl=en

  • Firefox has completely crashed today on my computer. I tried to reload it, and my security application closed it as a "malicious threat" . What's going on?

    All applications I try to open from my desktop ,where I used FIREFOX to open them...crash when trying to open. I tried to re-install FIREFOX, but my security application shut it down as a 'malicious threat'.
    What's going on?

    Thanks, I deleted a bunch of apps and some other TV shows I had on there. All of the other movies have an active download button so there is room for other movies, just not that one for some reason...weird!

  • How to configure Oracle 10g Advanced Security to use SSL concurrently with

    How to configure Oracle 10g Advanced Security to use SSL concurrently with database User names and passwords
    In Oracle Advanced Security Documentation it is mentioned that i can use SSL concurrently with DB user names and passwords. But when i configure the client certificate on the client my DB connection is getting authenticated using the certificate, which out passing user id or password.
    We want to connect to Oracle DB over SSL channel so that the data packets are not in clear text. Also we want the user to make a connection using user id and password.
    Basically we want SSL with out authentication.
    Need your expert advice

    Read the documentation (I have given following links assuming you are running a 32 bit architecture)
    Server installations:
    http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14316%2Ftoc.htm&remark=portal+%28Books%29
    Client installations:
    http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14312%2Ftoc.htm&remark=portal+%28Books%29
    You can find the required books (if not using 32 bit architecture) from
    http://www.oracle.com/pls/db102/portal.portal_db?selected=3

  • Problem with Advanced Security Manager

    Hi
    I am using the advanced security manager to migrate security from Essbase 7 server to Essbase 11 server. The users who are externally authenticated on essbase 7 server are under native security mode on the Essbase 11 server after security import.Does the Advanced security manager put all the users (whether they are externally authenticated or under native security mode) in native security mode after import?
    Please help

    Hello 831221
    In version 11 "native" means that the users are stored in OpenLDAP (once Essbase was externalized).
    You would only be able to create "external" users if the Shared Services have been connected to an external User Source (e.g. MSAD) prior to
    importing the users.
    best regards
    .T

  • EBS R12.1 with Oracle Advance Security option  - is it certified ?

    Hi,
    Environment details are below:
    EBS R12.1.1
    Oracle database version is 10g R2 (10.2.0.4) .
    OS is Solaris 10
    We are looking for an option of implementing Oracle advanced security option (ASO) .But want to know if its certified with EBS R12.1.1 / 10g R2 database.
    I checked few links but I'm not clear if its certified.
    http://blogs.oracle.com/stevenChan/2008/07/10gr2_10204_certified_with_apps_11i.html
    from the above link i understand its certified on 11i (11.5.10 CU2 only)
    <<Advanced Security Option / Advanced Networking Option (ASO / ANO) (11.5.10.CU2 only)>>
    Dees anyone know about this certification. If you have any pointers please let me know.
    Thanks for your time.
    Note : ASO is certified with 11g database. 11gR1 but I'm looking for 10g R2 (10.2.0.4)
    http://blogs.oracle.com/mt/mt-search.cgi?blog_id=101&tag=EBS%2012&limit=20
    Cheers,
    sbs
    Edited by: sbs on Oct 14, 2009 5:23 PM

    Hi,
    Please see this link.
    10gR2 10.2.0.4 Database Certified with Apps 12
    http://blogs.oracle.com/stevenChan/2008/08/10gr2_10204_database_certified_with_apps_12.html
    Regards,
    Hussein

  • Oracle Advanced Security in Developer Forms 10g (10.1.2.)

    Hi everybody,
    I have installed Oracle RDBMS 10g v.2 (10.2.0) and Developer Suite 10g (v 10.1.2) on XP platform on the same machine.
    I want to configure encryption and SSL authentication (Oracle Advanced Security) using Oracle Net Manager of Developer Suite as I have done before on Oracle Net Manager of Oracle Database Server and Oracle Client 10g as well....
    The problem is that there is no such a selection in Oracle Net Manager and i'm wondering if there is the capability to install and configure Oracle Advanced Security in Developer Suite 10.1.2..
    Is there Developer Suite 10.2. downloadable from OTN....????
    Thanks , for your interest...
    Simon

    I believe they need to be in separate folders.
    I extracted them into separate folders, then ran setup.exe from disk 1. It will ask you for the location of disk 2, enter that path and away it went.

  • Is it possible to perform network data encryption between Oracle 11g databases without the advance security option?

    Is it possible to perform network data encryption between Oracle 11g databases without the advance security option?
    We are not licensed for the Oracle Advanced Security Option and I have been tasked to use Oracle Network Data Encryption in order to encryption network traffic between Oracle instances that reside on remote servers. From what I have read and my prior understanding this is not possible without ASO. Can someone confirm or disprove my research, thanks.

    Hi, Srini Chavali-Oracle
    As for http://www.oracle.com/technetwork/database/options/advanced-security/advanced-security-ds-12c-1898873.pdf?ssSourceSiteId… ASO is mentioned as TDE and Redacting Sensitive Data to Display. Network encryption is excluded.
    As for Network Encryption - Oracle FAQ (of course this is not Oracle official) "Since June 2013, Net Encryption is now licensed with Oracle Enterprise Edition and doesn't require Oracle Advanced Security Option." Could you clarify this? Thanks.

  • Setting "Advanced security settings" on an OU using Powershell

    Hello,
    I have been tasked to create an OU with the simular permissions as another. On the current OU, the admin1 acount has special permissions (set within the Advanced Security Settings). For the new OU, they want a new admin2 account to have the same permissions
    on the OU as admin1 has on the current OU.
    I was able to extract the OU permissions using the following Powershell script:
    Get-QADObject 'OU=Temp,OU=,OU=Group,DC=Department,DC=Company,DC=com' -SecurityMask Dacl -sizelimit 0 |
    Get-QADPermission -Inherited -SchemaDefault |
    Select-Object account, rights, source, appliesto |
    Sort-Object account |
    Export-Csv c:\temp\report.csv -NoTypeInformation
    However, Powershell script did not provide the "Advanced Security Settings". Therefore, I am looking for a couple Powershell commands that:
    1. Copies the permission entries of the Advanced Security Settings Properties on an OU
    or
    2. Sets the permission entries of the Advanced Security Settings Properties on an OU
    Any help would be greatly appreciated.
    Mxer4life

    Hi,
    Please try with the following code to copy the atestuser1's ACL on TempOU1 and assign atestuser2 on TempOU2. Please be advised to test in your lab/test environment first. I tested only once. :)
    $ou1 = [adsi]"LDAP://OU=TempOU1,dc=adatum,dc=lab"
    $user1 = 'adatum\atestuser1'
    $ou2 = [adsi]"LDAP://OU=TempOU2,dc=adatum,dc=lab"
    $user2 = 'adatum\atestuser2'
    $acl1 = $ou1.psbase.ObjectSecurity.Access | ? {$_.IdentityReference -eq $user1}
    Write-host ($acl1 | out-string)
    $acl2 = $acl1 | % { New-Object -TypeName System.DirectoryServices.ActiveDirectoryAccessRule -ArgumentList ([System.Security.Principal.NTAccount]$user2), $_.ActiveDirectoryRights, $_.AccessControlType, $_.ObjectType, $_.InheritanceType, $_.InheritedObjectType }
    Write-host ($acl2 | out-string)
    $acl2 | % { $ou2.psbase.ObjectSecurity.AddAccessRule($_) }
    $ou2.psbase.CommitChanges()
    Write-host "After update with $user2"
    Write-host ($ou2.psbase.ObjectSecurity.Access | ? {$_.IdentityReference -eq $user2} | out-string)
    rgds,
    AZ

Maybe you are looking for

  • Can not forward e-mails to more than one address at a time. Just installed the latest upgrade.

    Prior to the recent update I was able to add addresses to an e- mail message for forwarding by touching a letter on the keyboard. Contact list would pop up and I could select a name and I . could continue this 8 or 9 times if desired. Adding an addre

  • Printing to a Windows XP printer

    My roommate has his printer, HP psc 1315, hooked up to his Windows XP machine. He has it shared, as my other roommate with a Windows XP machine can print to it. I am trying to print to this computer using my Macbook Pro, but when I print something, i

  • How to Pass parameter to Custom Scheduler dynamically

    hi , I am new to OIM. Need your help in passing parameters dynamically to Custom Scheduler. I have created Custom Scheduler by extending Task Support. I have registered the plugin through API , using PlatformService.registerPlugin() method. As I need

  • Iphoto and GarageBand broken since restore from backup

    My main problem now is getting iPhoto and GarageBand to work. But below is some history of my problem: My MackBook was returned today from the fixers. I had previously created an account for the engineers and wiped all the others. When I used Backup

  • SQL Command newbie problem

    hello, i am using cr 2011 and am trying to learn how to create sql commands. this is my first attempt. i created an sql command (select distinct region from customer) using the add command to report dialog box. i then created a parameter field on the