Advanced setting in Speedfan...?

Hi
I´ve been setting up speedfan according to Dannys Configuration......for my msi 6728, v2.0 motherboard
Everything are going great..but there are some small questions about the advaced options for the speedfan.
QUOTE:
Advanced
SpeedFan sets up these settings OK by default. I find if you select this tab and don't make changes sometimes they change anyway. The correct settings for Winbond W83627HF are:
Winbond W83627THF
Temperature sensor diode 1 - Thermistor diode
Temperature sensor diode 2 - PII diode
Temperature sensor diode 3 - Thermistor diode
PWMOUT1 clock - 23.43 KHZ
PWMOUT2 clock - 23.43 KHZ
Fan 1 Divisor - 8
Fan 2 Divisor - 8
Question 1:
Look at (red text) above, Temp. senor diode 2.........should I really change it to PII diode?If I do I get weird readings......if I leave in "thermistor diode" mode it show correct temp.
Question 2:
What is PWMOUT1 clock? It is now by default set to "Manual PWM Controll"
Plz explain.........
Regards
Mr W

Mr. W,
I reconfirm Danny suggestion as he was the moderator on the following link regarding the 'P' series temp problem,
https://forum-en.msi.com/index.php?threadid=46321&sid=
I also try the Bios version 3.0 up to 3.7 and found that for Bios Version 3.5 and below the temp is stuck.(Try to check it by doing cold booting and hot booting) Some people have a proper temp reading with Bios 3.6 and some is not. Other thing is the MAT/PAT doesn't perform properly using bios 3.5 up to 3.7.
Bios 3.7 is considered solve this temp problem on most user.
Recently I'll try two Platinum mobo came with bios 3.5 and the funny thing is both of them read temp 10 C higher then the same mobo came with bios 3.3.
Casing Tt Xaser III Skull
M/B 865 PE Neo-2 PFS Platinum Edition Bios Ver.3.7
CPU:P4 2.4C (HT enable)
(DOT Rank=Commander,PAT/MAT=Normal,2395 mHz - 2760 mHz)
WATERCHILL KT12-L20
Memory: Corsair Twinx XMS 4000 pro 2x512 meg (dual-channel dimm 1 and 3).
VGA:WInFAst A360 Ultra TDH(FX 5700 with 128 meg DDRII)
HD:2 SATA Maxtor 80gig and 1 ATA Maxtor 80Gig
CD/RW Yamaha and Pioneer DVD
PSU:ThermalTake Silent PurePower 480W (W0010/Black)
+5 V/40 A, +3.3 V/30 A, +12 V/18 A, -5 V/0.3 A, -12 V/0.8 A, +5 VSB/2 A Peak Load 550 W
Window XP PRO SP1
NEC FP2141SB
Microsoft DesktopPro
Sound Blaster Audigy 2 Platinum + Klipsch Promedia 4.1

Similar Messages

How to I stop pages from redirecting, whent he advanced setting that should prevent it does NOT work?

Here is the situation. I have the advanced setting checked to warn me when a sit tries to redirect or reload a page, which is supposed to prevent it from happening. However, it isn't working. A page tried to redirect, and I saw the little banner that said Firefox prevented it, then it happened again immediately, with the same banner, and then the page went ahead and redirected, and I did NOT click to allow it. It was as though the page redirect was tried three times, stopped two, then allowed. There has to be some way to stop this entirely. To be clear, I already have it checked under Advanced/General to "Warn me when websites try to redirect or reload the page." It simply isn't stopping the redirect. Yes, I have antivirus protection, and yes, it works. The page that s reloading is a Sims 3 store page. It's supposed to be a video, on the store site, to watch for points. Most re just that, but today some have sown up that, instead of playing a video, it redirects to some other site. One was a health site, with no video to even view! cookies galore, though, which have now been blocked.
Any help appreciated in preventing this from happening in the future!

All good ideas in general, but nothing new installed that I didn't want, and no unknown or new add-ons, either. Great advice, and nicely detailed, though, which should help others that might have those things causing problems. I have seen that sort, when another family member wasn't careful and had an annoying toolbar installed, that was practically taking over when they were online. Took a bt of doing to get that one out; uninstall was the start, but had to clear out some "stray" registry entries as well.
I did notice that if I do not click to close the little pop up banner, it doesn't redirect. Weird, but it worked. I don't know why closing the message without telling it to allow would have that effect, but it did. Also blocked ll the blasted cookies that were showing up, which is something I track, anyway. I can't stand having this or that site track, even if settings are to accept only from sites I visit. Google is BAD about that sort of thing, and some of the social media sites.
Appreciate the tips, in any case.

On my mini ipad, I cleared the cookies/histories in the safari setting. But what does the advance-setting of the clearing the website data does? What's that used for? Thank you!

On my mini ipad, when I'm on the internet -- a few times I will see a blue small pop-up boxes telling me to allow down/load or add something like the bubble-splash game or something similar. I jusr click ignore and it goes away.. I'm not sure why it's showing up lately.. I'm not sure if it's a virus or hacked in or a web brower matter..
Should I go to the cookies/histories in the safari setting and have it cleared out? Will that help resolve that??
And what does the advance-setting of the clearing the website data does? Sorry, I'm not familiar.. what's is that used for? Should I use that feature as well?? Thank you!

This indicates corrupt files.
A restore should resolve.

Item-level Permissions availabe in list advance setting not working.

Hi,
Recently i had an requirement of maintaining item level permission. My requirement was that whenever an item is created in list, it should be created with uniqure permission. I know how to do it by writing
custom code, but i don't want to do it with any code as client doesn't need any dll etc. After explroring i found that there is an option available in List's advance setting. Following are the steps i followed:-
Go to List settting.
Go to Advance setting.
In advance setting we have "Item-level Permissions" as one of option. This option have two
sub options.
For Read Accesss
select "Read items that were created by the user"
For Create and Edit access select "Create items and edit items that were created by the user"
Save the above settings.
Below is the screen shot for above mentioned setting:
Expected behaviour from above setting are:
Users can create new items
User can view and edit items only those item that are created by them.
But i found there is not change in item level permission. All users can View and
Edit items created by other users. May i am
misunderstanding above setting or there is Bug in sharepoint. Please help me if any body have any idea about it.
Regards,
Deepak
Deepak Kejriwal

Make sure that users have "Contribute" permission to the list, if the users have more permission at site level, then the list permission will be overridden by site permission.
Refer the following article for more info.
http://office.microsoft.com/en-us/windows-sharepoint-services-help/permission-levels-and-permissions-HA010100149.aspx
--Cheers

I need to access advanced setting on my iphone whilst setting up a pop3 email account

I need to access advanced setting on my iphone whilst setting up a pop3 email account. I have entered all of the required details but when it comes to verifying the account it does not progress any further and remains at the verification stage. I need to go in some how and change the security type and the port numbers. I believe this is in advanced setting but I dont know how to get there.
Any help appreciated

Can you clarify whether this is a POP or IMAP account? I suspect it is POP (and that messages have never been deleted off the server for the life of the account) but I'd like to make sure that is the case.

My Envy 7645 does not have the grayscale option in advanced set up to print in black and white

My Envy 7645 does not have the grayscale option in advanced set up to print in black and white

Hi , Welcome to the HP Forums! I see that your HP Envy 7645 does not have the grayscale option in advanced set up to print in black and white, on Windows 7. I am happy to help! It is possible, that you may only have the basic driver installed, instead of the full feature software and drivers. I would recommend to try our HP Print and Scan Doctor first, to see if ti can resolve the issue automatically. Otherwise, please try the following steps: Uninstall the software. Uninstalling the Printer Software.Clean boot the computer. How to perform a clean boot in Windows.Disable any Antivirus programs. Disable Antivirus software.Disable any firewall programs. Turn Windows Firewall on or off.Create a new user account. Managing User Accounts and Logins (Windows 7).Reinstall using the HP Printer Install Wizard for Windows. Hope this helps! “Please click the Thumbs up icon below to thank me for responding.”

Itunes Advanced setting?

I would like to have song titles list on CDs, on Itunes Advanced setting under burning my Include CD text is dimmed ??

Figured it out the, CD burner was defaulted.

How can i change my advance setting in my icloud account information?

Hoaw do I change my dvance setting in my icloud account information?

Settings>iCloud>Tap on your account>Advanced (Mail)

Advanced setting for all users in a Citrix environment

I would like to disable the Advanced option "Allow editing directly in cells" for Excel 2010. It is used in a Xenapp (Citrix ) environment using upm or roaming profiles. How can i avoid having each user make this setting wich is then
saved to his profile?
is there a registry change that will set it as the default when anyone launches excel?
Thank You.

Hi，
Please try to use disabe the "Allow editing directly in cells" in GPO.
Press win+Run> gpedit.msc>Adminstrative Templates>Microsoft Excel 2010>Excel options>Advanced>Edit directly in cells>disable
Then we could update the GPO.
More reference:
Edit directly in cell
Registry Key: software\policies\microsoft\office\14.0\excel\options\binaryoptions fNoInCell_66_1 0 | 1
This policy setting sets the ''Edit directly in cell'' option found under File tab | Options | Advanced | Editing Options.\n \n If you enable or do not configure this policy setting, Excel will allow editing directly in the cell This is the default
behavior.\n \n If you disable this policy setting, Excel will not allow editing to be done directly in the cell.
http://www.microsoft.com/en-us/download/confirmation.aspx?id=18968#
http://technet.microsoft.com/en-us/library/cc739112(v=ws.10).aspx
Regards,
George Zhao
TechNet Community Support

I can't seem to add my hotmail using the advanced set up on my new Z10

When I go to add an account using the advanced setup (selecting the hotmail icon), the phone keeps telling me my login information is incorrect. I can login to hotmail without any difficulties on my playbook and laptop. What am I doing wrong?

I found this problem was caused by the Microsoft Live Account "2-step verification process" (which is optional). I only discovered this after I had to log back into my Live account on the PC, and (silly me) decided I should opt for the 2-step verification process.
Using your computer:
1. log into your Microsoft Live Services Account
2. select Security Info
3. switch off the two-step verification process
Now go back to your Blackberry, set up your Live account with your email address and password by selecting Accounts / Add Account / Email, Calendar and Contacts / <youremail_address>
Once it has connected, select Accounts / Edit Account / Advanced / check "Push" (or go for Sync), and note that you can select or deselect the option "Download Messages While Roaming"
Worked for me on BBZ10. Hope that helps somebody else.

I can't delete the email on my iCloud advanced setting

Help I can't get rid of the advanced email in my iCloud account on my iPhone 5s, my mail keeps appearing on my daughters iPhone 4. How do I delete it? It's becoming very frustrating... Please could someone help me?
Thank You

Floesha wrote:
But I still can't rid of the advanced email in the iCloud settings.
Again, what does this mean?
There is no "advanced email" in Settings > iCloud.

How to make advance setting for internet apple tv

im strugling to connect my apple tv to the hotel wifi i must encode the password but before that i need to encod also the username which is not available from apple tv set up it only lead u to password. `is there any other option to set up the wifi?

You can not use ATV on WiFi networks that require a web signin if that is what is being asked.

Youtube no sound while video plays. Sound in other software is good. I tried to deleted all advance setting in flash play in system preference and download latest adobe flash player and restart computer. no help! please help solve this issue.

No sound in youtube while video plays.

From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
           ▹ System Preferences… ▹ Flash Player ▹ Advanced ▹ Delete All...
In the sheet that opens, check the box marked
          Delete All Site Data and Settings
then click Delete Data. Close the preference pane. Test.

Accessing Advance setting online

How do I find my user name and the password to access my setting online?
Arm

What is the model no of the Router...?
Which settings you want to access...?
If you want to access the router setup page then,Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case... Now,you can check all the settings.
If the admin password is not working then,reset the router for 15-20 seconds and try again.

Have tried connecting my email account to my iPad...have had help from tech support from my server....everything on advance set up is correct, but iPad still says my username or password is incorrect. Anyone have any other suggestions? Tired of

I have tried connecting my email account to my iPad, had help from my phone company/server tech support. Everything is correct in the advanced settings...but my iPad STILL says my user name & password are incorrect. Any other suggestions?

I interesting note:
MAILBIRD uses port 993 for incoming mail but THUNDERBIRD uses port 143
When uses 143, it kept " checking capabilities...."
then I changed to port 993 (like in MAILBIRD), it said "connected to.....mail," but then "timed out"
Any idea please???? help....extremely frustrated...

Advanced setting in Speedfan...?

Similar Messages

Maybe you are looking for