Advanced tables behavior

Hello everyone,
In my custom page, i have implemented advanced tables in the bottom of the page. So basically we need to scroll down the window to add a row in the advanced table as there are many other fields in the page. I see that when we try to create a new row in the advanced table, after clicking the addnewrow button, a row is created but at the same time the page moves up. We have to scroll down the page to enter values in the row added.
Is this the seeded behavior or can we change this behavior so that the page doesn't move up.
Thank you.

the control is going to the top as i am using pageContext.forwardimmediatly once the addanotherrow button is clicked to implement some validation. Is there any way that inspite of using forwardimmediatly, the control doesn't goto the top of the page? I don't want the page to move up.
Thanks

Similar Messages

How to get the value from Advanced table

Hi,
In the Advanced table have 2 LOV fields, I need LOV field value dynamically in the controller to validate the save button, if iam not selected any value in lov save button will not allow to save the data. In the table i am using 'Add another row'. How to get the lov field value in the process form request??? and how to do this requirement
Thanks
Naresh

1. You can specify required property on LOV field to "yes". For events where you wish to disable the client side validations, set the property disable client side validation to "true".
2. If above behavior is not what you are looking for, then you need to handle in AM and not CO.
a. Call an AM method from CO.
b. In that AM method, get handle of VO.
c. Iterate the VO Rows and check for your validation rules.
-Prince
http://www.princekapoor82.blogspot.com

Question on Light Table behavior

I am wondering if it just me and a couple of others who are seeing pixelated images in a Light Table in 3.1.1?
Situation:
With Aperture 3.1.1 set to all defaults in Preferences, I create a new light table (either empty or with pre-selected images) and then drag images to the light table.
The images are small on the table. They appear to be lower quality than the images in the filmstrip to begin with. Resizing the images exagerates the problem and reveals unclear and/or pixelation.
I have done a clean install of Aperture 3 and updated to 3.0.3 and the issue does not exist. Light Table images are fine whether resized or not.
*What I have tried so far:*
1 - Clean install of OS X 10.6 and updated with 10.6.6 combo installer (repaired disk permissions once installed), then install Aperture 3 and updated to 3.1.1 (repaired disk permissions once completed). Import new images from Nikon D80 (both RAW and JPEG) and tested light table. Same issue. Then imported new .cr2 files from a friend's Canon, which all had the same issue.
2 - Copy APTS lesson files and library to drive > open with Aperture 3.1.1 (upgrade library when prompted). The existing images in that library behave correctly in Light Table, but newly imported images into that library display the image degradation / pixelation in light table.
3 - In all cases, I have tried to delete / generate Previews as well as Thumbnails. None of these have sorted the issue.
Note - it almost appears to me that the images used on the light table are actually small thumbnails that are low quality on the light table and any subsequent resizing pixelates the image.
Note #2 - the strange thing in all cases is that using the loupe tool and panning over the images in the light table shows high-quality image.
I am trying to determine if it is my machine (or procedure) specifically, or if there are others experiencing this in large numbers.
I have 8 GB RAM and the nVidia 8800 GT upgrade card in my machine. Whether just Aperture 3.1.1 is installed or with all my normal software, no difference in Light Table behavior.
Looking for comments as to whether users have no issues like this or any who do.
I have already sent a report to Apple.
Thanks in advance for any comments.
Corky

SP,
I do not think this is intended behavior, as it works as expected in AP 3.0.3.
I sent a bug report via the feedback function in the Aperture menu and will follow up with a second one. I was hoping that other users would chime in as to whether they were experiencing the issue, or if it is working correctly on their system. Unfortunately, there has been no response other than yours as you can see.
There are two other threads since the release of 3.1.1 where 3 or 4 other users are having the same issue (at least as far as the pixelation / low resolution image issue).
On my system, the default size of the light table changed between 3.0.3 and 3.1.
In 3.0.3 the light table starts off smaller (with larger grid squares as if zoomed in) and dragging the images onto the table show the same quality image on the table as in the filmstrip. In 3.1 (and 3.1.1) the light table starts off much larger (with smaller grid squares as if zoomed out) and dragging an image from the filmstrip results in a smaller sized thumbnail showing on the light table at the lower quality.
I have also been going back through the 'Apple Pro Training Series - Aperture 3' book using the included library and lesson files (to test for functionlity with AP 3.1.1 and iPhoto '11) and I find that in lesson 3 where the light table is used, the same issue appears once you resize one of the images next to smaller images (which results in the three smaller images being lower quality than the resized image).
My guess is that the thumbnail / preview function connected with the light table sizing is creating an issue where the light table is using a smaller thumbnail when it should be switching to (or using from the beginning) a preview for quality. The fact that the image viewed under the loupe tool is high quality lends to this theory - IMHO.
I am hoping that this is fixed in 3.1.2 (if they release an update), since I would like to use the light table for layout decisions and for comparing multiple images. The bad image quality sort of shoots this function in the foot for me.
The only real fix is to revert to AP 3.0.3 and forego the 3.1.1 improvements which really isn't a fix.
To any others reading this post, could you please indicate whether the light table image quality is fine for you or whether you are experiencing the bad quality / pixelation issue I am? It would help me in discovering whether this is machine (hardware) specific or a wider issue.
Thanks in advance for any help.

Advanced Table with Grand Total

I have an advanced table created at the design time with property "Records Displayed" is set to 10. That means, i can able to see 10 records at a time. i have click on Next "Next 10" link to see the next 10 records. i have created a footer with Total. it is showing the sum of the column for the 10 records at a time. Every time i click on "Next 10" , it shows the next 10 records and give me total for current 10 records.
My requirement is show the grand total in the footer. is there any simple setup to show the grand total instead of current page total ? Can i replace the current page total with grand total ? if so, how can i get the handler for the total ?

We have not implemented this functionality but OAF Dev guide [11.5.10.2] has this info.
Control Total Value Generation
To bypass OA Framework's mechanism to control the value generation for a table column footer so you can
provide your own value such as a percentage, set the
oracle.apps.fnd.framework.webui.OAWebBeanConstants TABULAR_FUNCTION_VALUE_ATTR on the
appropriate table column. This overrides OA Framework's internal behavior of footer value generation. Like all
web bean attributes, you can data bound this attribute if required.
Sample usage:
OAAdvancedTableBean advtableBean = ...;
OAMessageStyledTextBean salaryBean = advtableBean.findChildRecursive(...);
String formattedTotal = ...;
*// compute the total*
salaryBean.setAttributeValue(TABULAR_FUNCTION_VALUE_ATTR,formattedTotal);
or:
salaryBean.setAttributeValue(TABULAR_FUNCTION_VALUE_ATTR,
new OADataBoundValueViewObject(...));
Grand Totals
Declarative or programmatic support for Grand Totals is currently not available in advanced tables. To
implement grand totals, you must build your own layout below the advanced table in accordance with the
Oracle Browser Look-and-Feel (BLAF) Guidelines: Tables: Grand Totals [OTN version]. Use the
messageComponentLayout region style to build this layout. In addition, you must programmatically provide the
values for the grand total fields. Since these fields are like any other form fields, you can first calculate the
grand total value in your controller code by looping through the entire view instance row range, and then call
setText() for the grand total field to set it with the calculated grand total value.
Hope this helps.
--- Thanks

Advanced Table does not refresh after database level action

Hi,
I have a page which has an advanced table. I update the advanced table from the page do some validations, update some DB level columns(also part of advanced table) and see that the changes are saved to the DB but the advanced table does not show the updates done at the DB level.
I tried clearing the VO Cache and re-executing the VO but still it does not refresh the Advanced table data.
This is very critical requirement for the client, any inputs will be greatly appreciated.
Thanks a lot in Advance.
Here is the code snippet from my CO's processRequest:
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAAdvancedTableBean tblbean = (OAAdvancedTableBean)webBean.findChildRecursive("recasttable");
if(tblbean!=null)
tblbean.setRendered(true);
OAApplicationModule tblam = (OAApplicationModule)am.findApplicationModule("RecastLineAM1");
tblam.invokeMethod("initQuery");
tblbean.getTableData();
Here is my AM - initQuery() code:
public void initQuery()
//clearVOCaches("RecastLineEO",true);
clearVOCaches(null,true);
getRecastLineVO1().init();
Here is the VO - init() code:
public void init()
System.out.println("****************************executing...");
OADBTransaction tx = (OADBTransaction) getApplicationModule().getTransaction();
if (tx.getTransientValue("RECAST_ID") !=null)
Number recastId = (Number) tx.getTransientValue("RECAST_ID");
System.out.println("recastId: "+ recastId);
setWhereClause("RECAST_HDR_ID = :1");
setWhereClauseParams(null); // Always reset
setWhereClauseParam(0, recastId);
executeQuery();
}

hi,
This is how I am calling a DB package. the package does updates on the table. once done I am issueing a commit and requerying the data, however the vo is not getting refreshed.... Can someone point out what am I missing... why is the VO not getting refreshed....
This is very critical...
Thanks
Srini
public void validateRecast(String respKey)
OADBTransaction tx = (OADBTransaction)getApplicationModule().getTransaction();
Number recastId = (Number) tx.getTransientValue("RECAST_ID");
System.out.println("*********************validateRecast().RecastId: " + recastId);
OracleCallableStatement ocs = null;
Connection conn = tx.getJdbcConnection();
String strOut="", strErr="";
Number respId = null;
try
respId = new Number(respKey);
catch(Exception e)
throw new OAException("Invalid Responsibility");
String stmt = "BEGIN " +
"GE_RECAST_UTILS_PKG.validate_recast(:1,:2,:3,:4); " +
"END;";
try
ocs = (OracleCallableStatement)conn.prepareCall(stmt);
ocs.setNUMBER(1,recastId);
ocs.setNUMBER(2,respId);
ocs.registerOutParameter(3,OracleTypes.VARCHAR);
ocs.registerOutParameter(4,OracleTypes.VARCHAR);
ocs.execute();
strOut = ocs.getString(3);
strErr = ocs.getString(4);
ocs.close();
System.out.println("Returned with: " + strOut);
if(strOut.equalsIgnoreCase("ERROR"))
//throw new OAException(strErr);
tx.putTransientValue("ERROR",strErr);
tx.commit();
getApplicationModule().clearVOCaches("RecastLineEO",true);
RecastLineVOImpl lineVo = (RecastLineVOImpl)getApplicationModule().findViewObject("RecastLineVO1");
lineVo.init();
System.out.println("===============RecastLnId: " +lineVo.first().getAttribute("RecastLnId"));
System.out.println("===============Product Line: " +lineVo.first().getAttribute("ProductLine"));
catch(SQLException e)
tx.rollback();
if(ocs!=null)
try
ocs.close();
}catch(SQLException e1)
throw OAException.wrapperException(e1);
throw OAException.wrapperException(e);
}

Unable to show error message in Advanced Table

Hi All,
I have an requirement to show a pdf ouput when user clicks on image or button in advanced table. I have created a new button in advanced table and when user clicks on button, I am showing an error message for testing. i used below code for CO extn, but when I click on button, I can see the diagnostic message but the error message is not showing in the page.
Need your assistance.
package XXJava.oracle.apps.ar.program.webui;
import java.io.BufferedInputStream;
import java.io.File;
import java.io.FileInputStream;
import java.io.IOException;
import java.io.InputStream;
import java.util.Hashtable;
import javax.servlet.ServletOutputStream;
import javax.servlet.http.HttpServletResponse;
import oracle.apps.ar.irec.common.webui.CustomCustSearchCO;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.webui.OADataBoundValueFireActionURL;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAImageBean;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.beans.OAWebBeanData;
import oracle.apps.fnd.framework.webui.beans.nav.OAButtonBean;
import oracle.apps.fnd.framework.webui.beans.table.OAAdvancedTableBean;
import oracle.cabo.ui.UIConstants;
import oracle.cabo.ui.action.FireAction;
public class XX_CustomCustSearchCO extends CustomCustSearchCO {
public XX_CustomCustSearchCO() {
public void processRequest(OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
super.processRequest(paramOAPageContext, paramOAWebBean);
OAAdvancedTableBean CustomCustSearchTable= (OAAdvancedTableBean)paramOAWebBean.findChildRecursive("CustomCustSearchTable");
          OAImageBean XX_Attach =(OAImageBean)CustomCustSearchTable.findChildRecursive("XX_Attach");
          /*Hashtable params = new Hashtable (1);
          //params.put ("XX_ACTION","XXX");
          params.put ("XX_ACTION","ATTACHMENT");
          Hashtable paramsWithBinds = new Hashtable(1);
          //paramsWithBinds.put ("XX_PRIMARY",new OADataBoundValueFireActionURL((OAWebBeanData) XX_Attach, "{$ConsInvId}"));
          paramsWithBinds.put ("CONS_ID",new OADataBoundValueFireActionURL((OAWebBeanData) XX_Attach, "{$ConsInvId}"));
          //paramsWithBinds.put ("CONS_ID",new OADataBoundValueFirePartialActionURL((OAWebBeanData) XX_Attach, "{$ConsInvId}"));
XX_Attach.setFireActionForSubmit("addnInfoEvent",params,paramsWithBinds,false,false);*/
FireAction localaction = new FireAction("tempEvent");
OAButtonBean XX_Button1 =(OAButtonBean)CustomCustSearchTable.findChildRecursive("XX_Button1");
XX_Button1.setAttributeValue(UIConstants.PRIMARY_CLIENT_ACTION_ATTR, localaction);
public void processFormRequest(OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
     super.processFormRequest(paramOAPageContext, paramOAWebBean);
String flaction = paramOAPageContext.getParameter("event");
if (flaction.equalsIgnoreCase("tempEvent"))
paramOAPageContext.writeDiagnostics(this, "XX_CustomCustSearchCO :Inside the event ", 1);
throw new OAException("The file path is invalid. Please check the value of the profile option",OAException.ERROR);
Regards,
Ram

You are throwing the message and then catching it yourself, and then printing the stack, which is what java is doing.
So, you need to
remove
}catch(Exception e)
e.printStackTrace();
and you would need to place the try block appropriately, since some methods you have used want exceptions caught.
Tapash

Records Not Getting Displayed in Advanced Table

Hi All ,
I am rendering an advanced table that displays some records . i have created a VO that is tagged to this Table . The Table was displaying the records satisfactorily initially . Now suddenly the table shows no Search Conducted .
I checked the VO and the AM . I found out that the query gets executed when the executeQuery() Method is called . The records are also fetched . (i verified this using methods like getRowCount() , getFetchedRowCount() , getRowCountInRange )
But the records dont get displayed on the page . What could be the problem . Kindly Help !
Thanks
Chirag Shah

Did you make any change to VO later on which might have change the column aliases?
If you are sure of VO returning the rows during page call, then I will suggest to delete the mapping from table and do that again.
--Shiv

Get Total of a Column of Advanced Table and use it in Controller in OAF

I have an advanced table on my custom page. I am calculating total of a column in my footer. I am acheiving this using the standard functionality of advanced table by setting total value property of my column to "TRUE" and displaying the total in the tablefooter components.
In addition to this I want to retreive the total value from my footer and use it in my Controller for further validations but I am not able to acheive this.
I tried some code already present in the Community for the same but nothing turned out right for me.
Can anyone please help me on this.

   Hi there ,
You can manually add the values of each row of a column and make use of the value obtained in your controller .
Here is the logic ,
1) get the vo instnace attached to that table .
2) Loop through every single row in the table .
3) get the value and sum up the value and use it in your controller .
int fetchRowCount = vo.getFetchRowCount();
voRowImpl row = null;
int count =0;
if (fetchRowCount > 0) {
RowSetIterator iter = vo.createRowSetIterator("Iter");
iter.setRangeStart(0);
iter.setRangeSize(fetchBidderRowCount);
   for (int i = 0; i < fetchBidderRowCount; i++) {
row = voRowImpl iter.getRowAtRangeIndex(i);
   //use RowImpl getters   10.
         Number personId = row.getPersonId();
count =personId+count;         // add each and every value and have in variable
iter.closeRowSetIterator();
Regards ,
Keerthi

Question regarding Classic and Advance table

Hi,
I have classic and advance table. I am populating with VO that brings 100 record. When i render page i see last record being displayed. How can i show my first record by defult on both tables?

By default the first record will be displayed, if you are seeing the last one instead, you probably did a vo.last() in the code.
Thanks
Tapash

Not able to get the handle of picklist which exists in the advanced table

Hi all,
I have a pick list called usageName in the advanced table when i am trying handle that picklst it is not giving me the correct value.
The valuess in the pick are
1)MFP Scan
2)MFP B&W,Copy,Scan
3)MFP B&W and Colour
4)Fixed
5)MFP B&W, Colour, Scan and Copy
6)Mono Printing - Per Catridge/Toner
7)Mono Printing - Per Page
to handle the pick list i am using the code as
OAMessageChoiceBean usagenameevent =(OAMessageChoiceBean)webBean.findChildRecursive("UsageName");
usagenameevent.setFireActionForSubmit("xxReasonEvent",null,null,true,true);
pageContext.writeDiagnostics("IN XxwepServiceContractSearchCO Process Request ","usagenameevent:"+usagenameevent ,1);
String usnmae = pageContext.getParameter("UsageName");
pageContext.writeDiagnostics("IN XxwepServiceContractSearchCO Process Request ","usnmae:"+usnmae ,1);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if("xxReasonEvent".equalsIgnoreCase(pageContext.getParameter("event"))||pageContext.getParameter("UsageName")!= null)
OAViewObject vo = (OAViewObject)am.findViewObject("XxwepUsageNameVO");
// usagenameevent.get
// OAApplicationModule am = pageContext.getApplicationModule(webBean);
//OAViewObject vo = (OAViewObject)am.findViewObject("XxwepUsageNameVO");
if(vo != null )
//XxwepUsageNameVORowImpl vo1=(XxwepUsageNameVORowImpl)am.findViewObject("XxwepUsageNameVO");
String usagename = null;
Row row = vo.getCurrentRow();
if( row != null )
usagename = (String)row.getAttribute("UsageName");
if(usagename!=null)
pageContext.putSessionValue("UsagenameParam",usagename);
pageContext.writeDiagnostics("IN XxwepServiceContractSearchCO Process Form Request ","usagenamein event:"+usagename ,1);
pageContext.writeDiagnostics("IN XxwepServiceContractSearchCO Process Form Request ","row:"+row ,1);
pageContext.writeDiagnostics("IN XxwepServiceContractSearchCO Process Form Request ","vo:"+vo ,1);
If i choose any value from the picklist out of those 7 items
Row row = vo.getCurrentRow(); is giving me the last value only
for ex i have choosed
2)MFP B&W,Copy,Scan
but the vo.getCurrent Row is giving me the value as
7)Mono Printing - Per Page
could please let me know what the mistake could be helpful
Thanks
Ajay

Hi,
As stated above if you need to check the message or message properties then you would need to enable tracking, depending on where you want it to be and what you want to track, below are two articles which should help you understand more:
BizTalk Server: Tracking Data Using BizTalk Admin Console
BizTalk Server: Checking Tracked Data Using Admin Console
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
Server: Multiple XML files to Single FlatFile Using File Adapter

How to get the values of all rows in advanced table

HI All,
I am using an advanced table to enter the values for the service contract line (its a custom page)in that advanced table i ahave column with lov called task number for that task number once i had choosed one task number and creating one more row using add anethor row button i want to restrict the user to not to choose the task number which was entered in the previus row.
Or if this is not possible i want to restrict the user by showing an error message when click on the submit button by saying you have choosed the duplicate task number please choose a uniqu task number
please give some hints
thanks
ajay

Hi
your approach will have two steps
1.) use the row refernce and get the value of task number of the row which is enterd by user .
2.) use getRows in range and compare values of task number of every row with the user selected value ,if value match then throw error.
Thanks
Pratap

How to get handle to a MST bean for a particular row in an advanced table

Hi
Requirement:
My advanced table has 2 columns, the 1st one has a LOV and the 2nd one is a switcher which toggles from LOV to MST depending on the value in the 1st column.
Implementation Steps:
1) Trap LOV event in 1st column and pass row index to the AM
2) Get the VO row from the row index (EVENT_SOURCE_ROW_REFERENCE), set the switcher attribute to MST/LOV depending on Business Logic
3) Get the view attribute value of the 2nd column (to which LOV/MST is mapped).
My LOV/MST gets rendered correctly on the page. However, when the LOV renders in the 2nd column, the view attribute is correctly populated in the LOV. But the MST renders with no value.
I understand that the MST loses value on form submission and that this value needs to be set in the PR of the CO. For that how do I get a handle to the MST bean of the particular row?
This is urgent!!
Thanks
Ritu

Pointers?
Anyway I can make the MST in the row return the correct view attribute?

Create a new Row in an advanced table in an advanced table

Hi,
I am handling the master detail relationship. For this i have used advanced table in an advanced table. I am facing a problem while creating a new row in the inner advanced table.
I have a Display Sequence column in the inner advanced table. I want to handle the logic for displaying the value of this attribute. As per dev guide i have attached the view link and for handling the Add New row event i am using the below code
OAAdvancedTableBean sublineDetailsTableBean = (OAAdvancedTableBean) webBean.findChildRecursive("SublineAdvTableRN");
OATableFooterBean sublineTableFooterBean = (OATableFooterBean) sublineDetailsTableBean.getFooter();
if (sublineDetailsTableBean.getName().equals(pageContext.getParameter(SOURCE_PARAM))
&& ADD_ROWS_EVENT.equals(pageContext.getParameter(EVENT_PARAM)))
This is working fine. The challenge i am facing is for creating a new row. Below is the code given in dev guide
// get a handle to inner tableOATableBean innerTable =
(OATableBean)webBean.findChildRecursive("InnerTableBean");
// create an enumeratorOAInnerDataObjectEnumerator enum =
new OAInnerDataObjectEnumerator(pageContext, innerTable);
while (enum.hasMoreElements())
RowSet innerRowSet = (RowSet) enum.nextElement();
// get all rows
Row []rowsInRange = innerRowSet.getAllRowsInRange();
for (int i = 0; i < rowsInRange.length; i++)
Row nextRow = (Row) rowsInRange;
// In case you want to add new rows in this RowSet, you can do the same
OARow newRow = (OARow) innerRowSet.createRow();
// initialize value for some attribute and insert the row
newRow.setAttribute("SomeAttr", "SomeValue");
innerRowSet.insertRow(newRow);
The Above code creates a new Row in all the master records.
How do i identify that the add new Row event has been triggered for which master record?
Can any body please help me on this. I am stuck from a long time and am unable to find the appropriate solution.
Thanks in advance
Raj Papdeja

Hi,
Following is the code written in PFR,
OAAdvancedTableBean sublineDetailsTableBean = (OAAdvancedTableBean) webBean.findChildRecursive("SublineAdvTableRN");
System.out.println("sublineDetailsTableBean::"+sublineDetailsTableBean);
OATableFooterBean sublineTableFooterBean = (OATableFooterBean) sublineDetailsTableBean.getFooter();
System.out.println("lineTableFooterBean::"+sublineTableFooterBean);
if (sublineDetailsTableBean.getName().equals(pageContext.getParameter(SOURCE_PARAM))
&& ADD_ROWS_EVENT.equals(pageContext.getParameter(EVENT_PARAM)))
System.out.println("Inside Add New Row Button Event for the Sub Lines");
strValueParam = (String) pageContext.getParameter(VALUE_PARAM);
System.out.println("strValueParam=>"+strValueParam);
ViewLink vl = am.findViewLink("GEPSCSTaskLineToSublineVL1");
System.out.println("View Link=>"+vl);
if(vl != null)
OAViewObject vo = (OAViewObject) vl.getSource();
if(null != vo)
GEPSCSTaskLineItemsVORowImpl voRow =
(GEPSCSTaskLineItemsVORowImpl) vo.getCurrentRow();
Number LineNo = voRow.getLineNo();
System.out.println("Source Row Line No::"+LineNo);
/*OAViewObject vo = (OAViewObject) am.findViewObject("GEPSCSTaskLineItemsVO1");
GEPSCSTaskLineItemsVORowImpl voRow = (GEPSCSTaskLineItemsVORowImpl) vo.getCurrentRow();
Number LineNo = voRow.getLineNo();
System.out.println("Line No::"+LineNo);*/
// Getting the LineNo as null
/*int intRowCount = vo.getRowCount();
if(intRowCount > 0)
System.out.println("Sublines are already present");
GEPSCSTaskLineItemsVORowImpl tasklineVORow =
(GEPSCSTaskLineItemsVORowImpl)vo.getCurrentRow();
Number lineNo = (Number) tasklineVORow.getLineNo();
System.out.println("LineNo=>"+lineNo);
Number lastLineDispSequence = null;
// Method to set the display sequence
//am.invokeMethod("createNewSublineRow");
// create an enumerator*/
OAInnerDataObjectEnumerator enum =
new OAInnerDataObjectEnumerator(pageContext, sublineDetailsTableBean);
while (enum.hasMoreElements())
RowSet innerRowSet = (RowSet) enum.nextElement();
// get all rows
Row []rowsInRange = innerRowSet.getAllRowsInRange();
intRowCount = rowsInRange.length;
System.out.println("intRowCount=>"+intRowCount);
if(intRowCount == 0)
System.out.println("No Rows present");
OARow newRow = (OARow) innerRowSet.createRow();
// initialize value for some attribute and insert the row
newRow.setAttribute("DisplaySequence", new Number(1));
innerRowSet.insertRow(newRow);
else if(intRowCount > 0)
System.out.println("Rows are already present");
Row nextRow = (Row) rowsInRange[intRowCount-1];
lastLineDispSequence = (Number) nextRow.getAttribute("DisplaySequence");
OARow newRow = (OARow) innerRowSet.createRow();
// initialize value for some attribute and insert the row
newRow.setAttribute("DisplaySequence", new Number(lastLineDispSequence.intValue()+1));
innerRowSet.insertRow(newRow);
break;
When i try to fetch the Line No which is the primary ID of the Parent VO, it always returns me the LineNO of the first Row and not of the parent row for which i have clicked the Add new Subline button of the Child record
Number LineNo = voRow.getLineNo();
System.out.println("Source Row Line No::"+LineNo);
Is there any way to fetch the primary ID of the row for which i have selected the Add new Subline button
Thanks
Raj Papdeja

How can I defualt a value in a formValue field in an advance table

Hi,
I am developing 3 custom master detail OAF Pages. All of these pages have one advance table region(Detail Region). Master Region is a message component layout. All these pages share same AM.
Source for advance table on all the pages is same database table.
Vo for the advance table has a query as below:
select * from XXTABLE where textid = &ref_id and rf_code ='PAGE1'
select * from XXTABLE where textid = &ref_id and rf_code ='PAGE2'
select * from XXTABLE where textid = &ref_id and rf_code ='PAGE3'
I have created one EO and one VO on XXTABLE.
I want to create 3AO and 3VL's for each master detail relationship.
My requirement is to default "PAGE1", "PAGE2" and "PAGE3" respectively in the refcode filed in VO when it is called from there respective pages.
Thanks!
Ritu

Hi Sanu,
Thanks for addressing the issue.
I can create multiple rows in advance table and with the click of a button all the rows are saved in one go. If I take a handle of VO in controller, I will still have to interate through each row in VOROwImpl to set ref_code for each row.(This would also need a logic to find which row is new and which is updated)
Is there any way where I dont have to do any interation and set a default.
Thanks!
Ritu

How to get current row from advanced table

Hi,
I have the following code to pick the value of columnA from one of the columns of an advanced table:
OAViewObject vo = (OAViewObject)am.findViewObject("AAALineVO2");
if (vo != null)
OARow vorow = (OARow)vo.getCurrentRow();
String ColA = (String)vorow.getAttribute("ColumnA");
String message = ColA; //to throw message so i can verify the value of ColumnA
throw new OAException(message, OAException.INFORMATION);
}It's picking up the first value of ColumnA of the first record correctly, however when I add a new row, it's not picking up the value of columnA anymore.
What am I doing wrong?
Thanks in advance,
N

Try with this:
import oracle.apps.fnd.lookups.server.LookupCodeVORowImpl;
public void aaa (String row)
LookupCodeVORowImpl laborcreateeovorowimpl = (LookupCodeVORowImpl)findRowByRef(row);
}Thanks
--Anil

Advanced tables behavior

Similar Messages

Maybe you are looking for