Advanced talent search - trex

Hello,
we do have the following issue with the advanced talent search:
The search result shows 17 lines, but only 3 lines contain a name and person number.
The other 14 lines are empty.
The three displayed persons do have a picture assigned (archive link).
We suppose that persons without an assigned picture are just not displayed.
So we don't now how to resolve this problem. We don't have modified the advanced talent search.
TIA,

Hi Jürgen,
Please see the document Common TREX issues which specifies:
This issue occurs when Business Partner objects (object type BP) do not exist or are not synchronized for each Central Person object (object type CP). See this blog on Business Partner objects in SAP HCM Talent Management.
So basically run the synchronization report to create/sync missing BP objects and it should be resolved.
Best regards,
Luke

Similar Messages

Talent Search-Trex- ESH_Cockpit-Error while preparing

Hello,
I am trying to configure TREX for talent search. But while trying to create the search object connector using ESH_Cockpit, I am getting the message 'Error while preparing' for all the connectors exept the connector HTRMC Person. These Connector is working. For an example here is the protocoll for indexing the connector HTRMC central person which is one who doesn't work:
29.07.2014 14:01:18 Step 001 gestartet (Programm ESH_SE_CONNECTOR_MOD_BGD, Variante &0000000000009, Benutzername RPCI280)
29.07.2014 14:01:19 Verarbeitungsschritt: Vorbereitung
Informationsmeldungen (1)
29.07.2014 14:01:19 Details zur Umgebung: TREX Version 7.10.58.00, Destination: TREX_DE1, SAP-Release 740
29.07.2014 14:01:19 Verarbeitungsschritt: Inaktive Konnektormetadaten Ã¤ndern
Fehlermeldungen (56)
29.07.2014 14:01:27 ZugehÃ¶rige Anforderungen fÃ¼r Objekttyp HRTMC_CENTRALPERSON, Knoten OBJID:
29.07.2014 14:01:27 Navigations-ID 4830F27A2F260115E10000000A421694 muss mit $NAV_ beginnen
Fehlermeldungen (1)
29.07.2014 14:01:27 Es ist eine Ausnahme aufgetreten
29.07.2014 14:01:27 Fehler beim Aktualisieren des Konnektors
29.07.2014 14:01:27 Job wurde nach System-Exception ERROR_MESSAGE abgebrochen
Thanks for help,
Jürgen

Hi Jürgen,
this is not much information. Which EHP you are using? EHP7 ?
please delete all Connectors and try to use backend report ESH_ADM_INDEX_ALL_SC..mark all checkboxes and select software component: EA-HRRXX
If this does not help you can get more information if you start fopr each connector the report with the correspnding variant as mentioned in the log. E.g.:
ESH_SE_CONNECTOR_MOD_BGD variant &0000000000009 ( pleease use alwys the last variant in the log.) This will gif you futher information.
best regards
Martin Hastik

Authorization error while configuring TREX for HR - talent search

Hi All
HR team is performing talent search configuration and they are using Tcode ESH_Cockpit. Here while creating, they get this error "Error while preparing".
For one of the failed connectors (eg: HRTMC AES Documents), job log is as given below:
24.10.2011 08:34:16 Job started
24.10.2011 08:34:16 Step 001 started (program ESH_SE_CONNECTOR_MOD_BGD, variant &0000000000027, user ID T710752)
24.10.2011 08:34:50 Authorization check CP_USER_ALL:
24.10.2011 08:34:50 Path-based authorization check CP_USER_ALL has wrong data
24.10.2011 08:34:50 Authorization check CP_USER_ALL:
24.10.2011 08:34:50 Path-based authorization check CP_USER_ALL has wrong data
24.10.2011 08:34:50 Authorization check CP_USER_ALL:
24.10.2011 08:34:50 Path-based authorization check CP_USER_ALL has wrong data
24.10.2011 08:34:50 Authorization check TB_PLOG, auth. obj. field assignments:
24.10.2011 08:34:50 Not all authorization fields are mapped to node fields or constants
24.10.2011 08:34:50 Authorization check TB_PLOG, auth. obj. field assignments:
24.10.2011 08:34:50 Not all authorization fields are mapped to node fields or constants
24.10.2011 08:34:50 Authorization check TB_PLOG, auth. obj. field assignments:
Here they have SAP_ALL assigned and even then they are getting above authorization related error .
Your advise will be really helpful. Thanks in advance for your help.
Regards,
Aditya

TREX also uses gateway programs.
Check with your basis folks or tcode SMGW (go to --> expert functions --> external security) to see whether it is restricted.
There are also some SAP notes about this...
Cheers,
Julius

Talent Search w/o TREX

Hi everyone,
we are on EHP5 and started implementing Talent Management functionality.
When we came across to Talent Specialist part, we realised that TREX is mandatory to be able to do talent search.
We are looking for a way to do be able to use Talen Specialist role w/o implementing TREX server. I know it's not possible with SAP's standard customising / configuration method, but I think there should be a workaround to bypass TREX and do the search with some Webynpro ABAP codes. Because we really do not need very complicated search. Just a simple name, personnel number, etc. kind of search.
Thanks,
Can

Hi,
Of course the data is available on your R/3 system as well, so it can be searched. But it will require quite a lot of custom development. The question is also if it can be integrated seamlessly into the TM application.
So, you would need to develop some back-end functions for data retrieval/search. And a UI to perform the actions with (so Webdynpro in your case most likely.
So, as I was unable to extract the question I just give an answer I think would fit
Yes, technically it is possible to create your custom search, all the data is available on your system. But besides the high effort to implement (depending on your detailed requirements) you can also run into a performance issue (lots of data needs to be processed).
Hope this helps.
Regards and Groetjes,
Maurice Hagen

Getting error as "Error occurred during your search, contact your system administrator" while using talent search in portal (TREX)

Hello Experts,
     We are facing an issue like when our Talent specialist are trying to use talent search through their portal they are getting an error like "Error occurred during your search, contact your system administrator" as shown below.
     We have checked in our backend and for all the talent specialist search results are showing successfully.
     Anyone of you kindly help us to get this sorted out.
Thanks & regards,
Sakthi

Hi Sarabjeet,
The XML iView uses server-side fetching, so if you are having problems with a regular URL iView in server-side fetching mode, so the problem with the XML iVIew probably has to do with the proxy settings.
And since you got a 407 error, it seems there is an issue with proxy settings or the proxy server, as mentioned in this description of 407 error:
The HTTP 407 code only applies to users who are accessing the Internet behind a proxy server. This is common in government and corporate workplaces. The 407 code indicates that your computer must first authenticate itself with your company's proxy server. Check with your IT department or computer support group as to the exact reason why you may be getting this error. It may be possible that the proxy server does not allow downloads of specific files (exe, cab, com). You can also verify that your proxy server settings are valid.
I will check if I can find out any more specific info.
Daniel

Talent Search

Hi,
We are implementing ESS/MSS on EHP5.
When testing the funcionality "Talent Search" for Talent Mgmt Specialists by the follow link:
http://server:8000/sap/bc/webdynpro/sap/hrtmc_search?sap-language=EN&WDCONFIGURATIONID=HRTMC_SEARCH
After filliing the person number, we are getting the follow message:
"The Search Is Currently Unavailable"
Are we forgetting some configuration?
Thanks in advance.
Bruno

Is trex installed?
. Please create an connection and schedule the creation of
search connectors + initial full indexing using job ESH_ADM_INDEX_ALL_SC
and or using the Enterprise Search Cockpit (transaction esh_cockpit).
Please read also the documentation regarding Deltaindexing (specially
for HRTMC_AUTHORITY_VIEW search connector, wich is modeled to index
Authorization).
Please see also IMG activities IMG->Talent Management->Basick
Settings->Search.
This is restriction of TREX - please read also the Note
1249465 - TREX 7.1: Installation of TREX for Embedded Search.

How to use Result Search (TREX) Impagination in customize Layout Set

Hello Experts
We are using a customise Layout Set get from "NewsBrowser" duplication..
At the moment we are using it to show the first three documents of a km folder, but that folder contains a lot of documents and in the bottom of the iview are showed many link for the other files (es. "1-3 4-7 8-11 ... etc etc").
We would like to use the same impagination used in the result search list, when you do a search with the TREX the link for the other impagination does not show all the result, but in the bottom of the iview I can see a link as "1-10 Continue" ...
I can I set the same in my customised Layout Set??
Could you help me??
Best Regards

Hi Maurizio Ledda
For these u need to change UI Search
system admin. -- system config --- knowledge mangement content managementuser interface -- show advanced options -- search -- search options set --
UI search -- Un check SHOW NO. OF HITS option -- save
and log off and login and search documents u will get like this "1-10 More"
Regards
Krishna.

Talent Management - Talent Search and Enterprise Search

Hi All,
We are on ECC 6, Portal 7 SP3.
We are using Talent Management Business Package. Under Talent Management-> Talent Information, there is an iView called Talent Search(which is based on the Webdynpro ABAP "hrtmc_search").
For this Search functionality I have read that SAP Netweaver Enterprise Search is needed.
My question is:
1. Is TREX required for Talent Search. I've read that it can be integrated with Enterprise Search. Please note that we are not using KM and Collaboration.
2. Is it necessary to integrate AS Java with Enterprise Search since it will only be used for Talent Search iView which is in any case a webdynpro abap application.
So in this case Enterprise Search will only be integrated with AS ABAP / ERP system - Is this assumption correct.
Your input and help is much appreciated..
RD

Hi RD,
the TREX you will need for this will be specific to HCM and called via HCM's own strategy in ECC 6.0. This - for all I know - should be through AS ABAP for indexing and AS Java for searching.
This should have nothing to do with the Portal's access to TREX, as the functionality is HCM's, even if provided to Portal in an iView. For the specifics, please check your HCM Master Guide and other documentation and/or discuss with your technical consultant for ECC 6.0.
Best, Karsten

Talent Management Specialist 1.40 with Talent Search iview

The new Talent Search iview is based off of the WD4A app HRTMC_SEARCH (and component HRTMC_SEARCH
Does anybody know if TREX is a requirement for this Iview...or can you configure it to use a different search mechanism?

Dear Ferguson,
For the HRTCM - Trex is required to do any search.
Please ref :
1) SAP Note : 1273780
2) SAP Note : 1249465
You should be able to use different search product, Like MOSS (MS) or even Google's Product but how will they work and how can you link them is a big ques.
Let me share our experience
The search will work based on two component.
1) Indexing - ABAP this is already there as Embedded Search
2) Search - Java this is the search tool in our case TREX
- there are two options Single host (Works on Windows)* and multiple host (only on Unix/redhat)
*not mentioned on the note
Thus is as far as i have come on this
Regards
Amith Ingua
[Re: TREX Embedded search with ECC 6 ehp 4 (HRTMC)]
[https://websmp205.sap-ag.de/~sapidb/011000358700000726182007E/TREX710.htm]
Edited by: Amith Ingua on Sep 29, 2009 11:29 AM

Talent Search not showing name for one employee

Hi
I am facing issue in talent search, it is not showing employee name after search. This is happening only for one user, means surely it will be master data issue,application is working fine.
But now I want where to see that data maintained.
Please help with this if anyone knows about it.
-Yogesh

Hi Yogesh,
If it is only one employee that it isn't showing for then it could be authorizations. Some other suggestions are:
- Incorrect or no name for CP object
- Incorrect authorizations of user used for delta-indexing
My guess would to be to look at authorizations first.
Best regards,
Luke

CANNOT USE "Advanced Custom Search Form For ADF"

Hi,
I have tried the application on this old post but it doesnt work on jdev 11g even after migrating.
Can some body tell me whats wrong and / or post a working application here.
Need to use this functionality urgently.
the original post is here.
http://my.opera.com/dominionspy/blog/2007/02/26/an-advanced-custom-search-form-for-adf
Any help is really appreciated.

Thanks for your reply.
Could you tell me where can i find example implementations of the query model classes.
they have mentioned it to be found in "For an example implementations of the different model classes for a query, see the classes located in the oracle.adfdemo.view.query.rich package of the ADF Faces sample application."
Also where can i get the source code for this http://jdevadf.oracle.com/adf-richclient-demo/faces/components/query.jspx
thanks in advance

Advanced Keyword Searches (for data on ftp)

Does anyone happen to know if running an Advanced Google Search will turn up data in the Public folder on my website that is not otherwise linked to my website? I have a couple of websites and I am trying to make sure I understand what is publicly available, what can be "scoured" and downloaded and how careful I really have to be with this.
I also have a Wordpress Blog that allows for a PASSWORD PROTECTED post but I was not able to find out from their help forum if the Images that were uploaded as part of this post, or the pdf's that were linked to in this post - are in fact available via an Advanced Google Search. Since I upload the pdf's and the images to a Public folder on the site I assume this is the case.
If so, I'd love to make sure I know how easy it would be for someone to download /all/ of this information.
THANKS for any tips on this topic.

888442 wrote:
Hi,
We have an existing setup of physical standby database on 11.1.0.7 on Linux (primary 2 node rac)
Now, the customer has bought licence for Advance compression and we want leverage this in our standby setup.
The existing parameter what we have is
log_archive_dest_2 =SERVICE=STDBY_SWPRDENT ARCH ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=STDBY01 NET_TIMEOUT=60
what changes do i need to change this for advance compression option.Some more reference, Check this manual
http://docs.oracle.com/cd/B28359_01/server.111/b28294/log_arch_dest_param.htm#BABBFBDI
http://docs.oracle.com/cd/B28359_01/server.111/b28294/log_transport.htm

DW/CF Extension for advanced database search

Hi:
Do you know any Dreamweaver Extension that makes Advanced
Coldfusion search pages that searched through different Database
(MS ACCESS or MS SQL 2000) tables and recordsets? Free or
Commercial doesn't matter just I want it to works good with
different related database tables.
Thanks
Benign

http://www.tom-muck.com/extensions/help/dynamicsearchasp/
Have a look at Tom's Dynamic Search extension.
Cheers jojo
Adobe Community Expert for Dreamweaver 8
http://www.webade.co.uk
http://www.ukcsstraining.co.uk/
Extending Knowledge, Daily.
http://www.communityMX.com/
Free 10 day trial
http://www.communitymx.com/joincmx.cfm

Help! Advanced Product Search

Hi guys,
I need some help setting up an advanced product search for a client.
We are over half way through the job and they have now decided they want a product search to be able to so they search the size of a generator by power rating and brand. So basically a dropdown with 0 - 4 kva / 4 - 8 kva / 8 - 12 kva and another with brand: Brand 1 / Brand 2 / Brand 3 etc. In theory it shouldn't be too hard, but with the limitations of BC I cannot see anyway to do this. I found a link to an old article on the old BC forums (http://www.businesscatalyst.com.au/ForumRetrieve.aspx?ForumID=52&TopicID=16139) where someone was trying to do a similar thing, but since its all redirected I cannot see a solution!
They essentially were using the custom fields to enter say the rating 3 kva and brand and trying to search that way.
In the support documentation it says you can add a '&SE=True' to the end of your Search action and it will search 'Tags' which is possible but it seems a little bit of a messy way to do it. Ideally I wanted to use a series of dropdown menus to make it easier.
If anyone has any advice or suggestions that would be fantastic. I am almost leaning towards getting a custom jquery search made up but it just seems like going to extremes when BC should be able to handle this.
Cheers!
Guy.

Hi Guy,
If you disable JavaScript and go to http://www.businesscatalyst.com.au/ForumRetrieve.aspx?ForumID=52&TopicID=16139 you will be able to view that forum post. But I had a look at it and there is nothing useful in it.
Basically, there is nothing out of the box that will accommodate for that requirement. The only thing you can do is to create power and brand catalogues and provide the catalogue dropdown where the customers can choose the power or the brand it in the search form.
Cheers,
-m

Whence people.aspx and advanced people search from 2010 to 2013?

In SP 2010 my enterprise search center contained the page people.aspx, which allowed users a specific landing page if they were interested in doing only people searches. So far, my current 2013 installations have the peopleresults.aspx pages, but not
the people.aspx page.
Particularly interesting to my customers from the 2010 people.aspx is/was the way the advanced search options had been handled. In 2010 this was a javascript invoked drop-down of text boxes that allowed users to target particular crawled properties
(and build the queries for the users) without the users having to learn the (seemingly to them) arcane incantations of the one-box search used to do that.
Was that "Last Name" or "LastName" or "SurName"? Is it ":" or "="? do I use single or double quotes? You gret the idea.
Anyway, as we consider the migration path of our search page, what's the strategy for support of the 2010 'advanced' people search functions from the people.aspx page in 2013?
Am i supposed to create a new people.aspx patterned off the results.aspx page so they have a "people search starting point"?, and then also create a peopleadvanced.aspx page to support the targetted properties with proper text boxes (not ones
that say "contains all words", etc). Does the javascript ToggleTeaser() box still exist in the 2013 one-box search web parts, or is it just gone?
Help in how i plan this migration, and explain this to my customers appreciated.

Hi Norm,
SharePoint 2013 search center also contain people search, you can choose to search ‘Everything’, ‘People’, ’Conversations’ or ‘Videos’.
And for Advanced Search, you can enable it by editing the page in search center, click to ‘Edit the web part’ on the web part menu, then Settings->enable advanced search page, choose to enable it.
You will see the advanced search link in search page.
Thanks,
Qiao Wei
TechNet Community Support

Advanced talent search - trex

Similar Messages

Maybe you are looking for