Advancing and Zooming multiple images at the same time.

Hi All,
I have requested this feature since early Lightroom beta 1, so I'm trying again.
Example: I have multiple images opened up in 'Survey' mode, let's say 3 or 4 mages. Which on my Apple 23' Cinema Display makes for much nicer size reviewing, than the largest 'Thumbnail' setting.
The basic ability to hit a combo-keystroke, and advance all the frames at once in 'Survey' mode, to the next set of images of that same total. You know, same as 'page up' or 'page down' in the thumbnail view in the Grid. Also, to zoom all of them at the same time.
Now, I know IiView Media Pro could do this several years ago, before Microsoft turned it into 'Expressions Media', with 4 images at a time. And like I said, I've been requesting it since early LR beta 1. You know, just add a 'Shift' to the Page Up/Down function keys. Or 'Option' or "Control' key.
I love the Survey mode, but surely we can have up to four, or even a half-dozen images, advance at the same time, instead of adding or subtracting one image at a time. As it currently does.
Thanks,
-Sol

Based on the frequency with which this trips up users, the Aperture team is going to have to add a much stronger visual indication that "Primary Only" is active. Marching ants, anyone? Or a pink selection marquee?
At least in the Viewer when multiple Images are selected the thin white selection marquee is dropped when Primary Only is active. There is no such change in the Browser.

Similar Messages

How to fade groups of images or multiple images at the same time?

I am creating a flash infographic, and want to fade images I have imported from Illustrator that are grouped. I would like to know how to fade these groups and multiple images at the same time.
Thanks!

Use TweenMax for this.
the syntax is like this:
var arrayOfDisplayObjects:Array = new Array();
//with arrayOfDisplayObjects.push(DisplayObject)
//you can put any DisplayObject in the Array and when you want to fade them call this
TweenMax.allTo(arrayOfDisplayObjects,1, { autoAlpha:0} );
//to fade them in 1 second to alpha=0 and when reaching the zero make them invisible (to save processing power)

Can Express 9 play and record multiple instruments at the same time?

I have logic express 9 and was told with my interface that I can play and record different instruments at the same time on Express 9. Is this true because I have spent a long time trying to figure out how.

Hi,
to record multiple Inputs at a time, open up the appropriate number of audio tracks. Now for each track, select the correct Input in the Channelstrip.
Now, ARM all these tracks for recording by clicking the little red R in the track header or channelstrip. Now if you hit record, all these tracks should record simultaneously their respective inputs.
All other existing tracks should playback while recording.
Fox

Removing keyword from multiple images at the same time

None of the documented methods seem to work for me.
1     Select all the images. Go to Metadata > Remove Keyword [my keyword] - the keyword is only removed from the image that is selected in the batch - i.e the one that has the yellow border round it to show it's the active image.
2     Select all the images, enter [my keyword] in the Add Keyword field when Keyword Controls is visible and press Shift + Enter - does the same thing as 1 above (removes it from the active image only).
3     Select all the images, Shift Click on the keyword that I have in my Keyword Controls in the Control Bar - does the same things as 1 above.
So all these methods, which are supposed to work, do not work for me. The removal of the keyword is only applied to the image that has the yellow border showing it to be the currently active image in the selected batch - the remaining selected imaged still retain the keyword. I can remove it "one at a a time" but it would be great if I could find a solution as to why this isn't working.
Any ideas?
If it helps, I'm running Aperture 3.1.3 in OS X 10.6.8.
thanks
Alan

Based on the frequency with which this trips up users, the Aperture team is going to have to add a much stronger visual indication that "Primary Only" is active. Marching ants, anyone? Or a pink selection marquee?
At least in the Viewer when multiple Images are selected the thin white selection marquee is dropped when Primary Only is active. There is no such change in the Browser.

How to import multiple images at the same time in illustrator?

How to import multiple images in a document at the same time in illustrator?
It's possible?

Script: Place Multiple Files in Illustrator (Kelso)
http://kelsocartography.com/blog/?p=2047

Can a single AE receive and deliver multiple signals at the same time?

I've looked through the forums and the AE pdf manual and have not been able to find a definitive answer so far.
We have a (all Apple) cafe in a remote location with no Apple support and we presently operate wireless music and wireless internet for customer use from one iMac and one AE. The iMac is also our cashier station. We have another iMac for customers who don't have their own laptops. The iMacs switch to screensaver displays promoting the cafe when not in use.
Our wired TV monitors that are currently not associated with our AE display either satellite TV, cable TV or from DVD player using a manually switched hub with the three separate receivers wired to the hub.
We want to add streaming TV from the internet to the TV monitors so we will have four sources. I am looking at connecting this internet streaming TV source to the TVs via AE hence I want to also allow the other TV sources to operate via AE. If possible, we would also like to switch in the screensaver from one iMac on a timed basis (or using Apple remote to one iMac) if there is nothing else of particular interest on the TVs.
The AE has multiple ports that can be expanded using hubs that we can hopefully connect the existing 3 TV sources, and can receive / transmit to multiple computers but can it operate the iTunes, internet distribution, and TV output (with switching TV inputs via the iMac & AE Utility) at the same time or do we need multiple AEs and another computer?

The AE has multiple ports that can be expanded using hubs that we can hopefully connect the existing 3 TV sources, and can receive / transmit to multiple computers but can it operate the iTunes, internet distribution, and TV output (with switching TV inputs via the iMac & AE Utility) at the same time or do we need multiple AEs and another computer?
The AirPort Extreme base station (AEBS) does not have a TV or video output.
The AEBS, just like any other router, supports multiple clients simultaneously. Of course there is always bandwidth limitations for any device. So in theory the AEBS can support all of that. In reality the performance of each service will depend on the bandwidth used by each and the bandwidth available. This is no different than any router.

Ability to adjust multiple images at the same time as in Bridge

Why the extra step of having to sync develop settings? Why not have lightroom's develop module work like Camera Raw? I would like the ability to select my main image and any others that need the same adjustments, then make adjustments to the one while the others are being updated at the same time just like in ACR. Please add this simple feature - it really saves time and is consistent with the way ACR works.
Also, just realized that syncing metadata does not sync keywords. This needs to be addressed ASAP. Just wondering how the engineers overlooked this! It should do it automatically or as an option in the sync metadata options box that pops up when syncing.
Overall, I really like lightroom and see a lot of potential once it's totally dialed. Please Adobe keep it coming with the updates!
Thanks for listening-
Scott

>Why the extra step of having to sync develop settings? Why not have lightroom's develop module work like Camera Raw? I would like the ability to select my main image and any others that need the same adjustments, then make adjustments to the one while the others are being updated at the same time just like in ACR. Please add this simple feature - it really saves time and is consistent with the way ACR works.
You can already do this a couple of ways...use Auto-Sync or Quick Develop.

Aperture cannot add GPS data to multiple images at the same time

I am new to Aperture and have been using it for a week or so now. Today I tried to add GPS data to a number of images and found out, it appears Aperture can only add GPS data to one image at the time. When I select multiple images to add the GPS data to, it just doesn't do anything. It leaves the GPS data blank.
Here is what I do:
From the Info-tab I select "GPS" from the drop down menu
At the bottom of the info tab I show the map
In the map's search box I enter the location I want to assign to the photo(s)
From the resulting drop down menu I select the locatiion I want and press the "assign to location" button
As long as I choose only a single image, this works fine and the GPS Data is added. Not so when I select more than a single image. After pressing the "assign to location" button it seems as if the GPS data is added (there is no message indicating otherwise), but the GPS data in the selected images is blank.
What am I doing wrong ?
Additional info
I have been testing this a bit more and the behavior is even more strange: When you select multiple images in Aperture, they get a thin white border, except the one that you touch last (normally the last image of the selection) that will have a thicker border around it. It appears that, when selecting multiple images, the GPS data is ONLY assigned to the photo in the selected setthat has the thicker border (?????)
Message was edited by: dinky2

Rereading your post, I think the problem is, that you are assigning the location from the Info panel and not from the Metadata menu. The Info panel and the Metadata menu ar behaving differently.
The Info panel will always only affect the primary selection, but the Metadata menu will work on all selected images (unless "Primary only" is checked). So , if you want to assign your location to multiple images, use "Metadata > Assign location" instead of the little map in the "Info" panel.
Or use the "Places" view. Then you can drag all images at once to the same pin on the map.
Regards
Léonie

Is there a way to add multiple images at the same time to Keynote 6.0?

I just brought keynote after searching online about adding multiple images to a presentation all in one go - I couldn't do this on the powerpoint version I was using but there were multiple references on google to being able to do this on keynote. I purchased it and now can't get it to work! Any ideas anyone? Thanks

Do you mean like dragging in multiple images and having one image go on each slide? If so, you just drag the images into the Slide List on the left instead of onto the slide. From this prior post.
https://discussions.apple.com/message/9068283#9068283

Multiple images of the same file on one page

How do I create multiple images of the same file on one page? For example, I've got an image that I could fit 6 of on one page, and would like to print it that way instead of printing it on 6 individual pieces of paper.

Are you attempting to do this in Adobe Workspaces? Or are you looking for software that will do it?
If the former, you could insert the image into a Buzzword document six times. Not exactly elegant, but it might do the trick.

How to have multiple images on the same screen? like in the movies where you see several actions at

how to have multiple images on the same screen? like in the movies where you see several actions at the same time ....
i don't find a tutorial in adobe tv....
thanks !!

The short answer is that you'll put the source clip(s) for each inset on a different video track, all stacked up. Then use the Scale and Position effects (under "Motion" on the Effect Controls panel) to reduce their size and place them where you want.
If the content of an inset will involve edited content (where you're cutting among various clips or just trimming out unwanted content from a single clip), then you'll probably find it easier to do all those edits in one sequence, then nest that sequence in the master sequence, where you apply the Scale and Positioning effects. That will save the step of applying the scale and position effects to each edited track item.

I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to

I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to pick one or the other, is there a way to have both?

I asked same question
Any answers

Call and Execute Multiple Windows of the same VI

Hi,
I would like to call and execute multiple windows of the same VI.
Please take a look for my attached vi, and start from the 2x2.vi, i think you have to re-enter the file path to run (sorry for inconvenience).
If I click the start button in different sub panels, the sub vi(Temperature Analysis.vi..& etc) should be called out in multiple windows, hold it, and run simultaneously.
But now the problem is, the sub vi is called out 1 by 1 until it is finished prior the second sub vi is called.
May I know how to solve that?
Thanks.
Attachments:
My VI.zip ‏173 KB

Hello TanTan
1. Open the PopUpmain.vi and select the path of PopUp.vi
2. Enter the number of popups and run the VI.
Hope this attached VI will work as per your expection. Please select the less number of instances
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet
Attachments:
PopUpMain.vi ‏12 KB
PopUp.vi ‏8 KB

WDS 2012 R2 - Cannot PXE multiple clients at the same time

Hello All,
This is my first post on here so I apologize if this is the wrong place. I work for a school district and we are implementing WDS 2012 R2. We've been extremely satisfied with the speeds and ease of use through unattend files. However, for
the past month I've been looking for a possible answer to a problem that has plagued us from day one of implementation.
So here's the problem:
I have a stand alone WDS server which is not a domain controller and is not our DHCP server. I have IP helpers and broadcast forwarders setup on the network. As well as option 66 and 67 in DHCP. So far so good right!
Well that's partially right. When we boot one client at a time to the WDS server. Everything works as intended. We can TFTP the necessary files from the WDS server. Everything boots up and we're off and running.
However, if we boot up two or more clients at the same time. The WDS server never responds to the traffic. The clients get their DHCP information. They start the referral and download from the WDS server, but get no response. I'm
really hoping that someone on here would have some insight of something I can try. I've about exhausted my list of peers and contacts. They're all stumped as well and were smart enough to stay with 2008 WDS.
I would prefer to stick with 2012 R2 since it's setup and working for the most part. With only this one hiccup.
Thanks in advance for any guidance!

Hello Daniel,
I appreciate the reply and apologize for taking so long to get back to this. Things have been a little hectic over here.
I have tried everything on this forum and I am still unsuccessful in PXE booting multiple clients at the same time.
Multicast is enabled on the server, and it works for the clients. However, as stated in the original post. I cannot boot multiple machines at the same time. I can start them from the image selection screen around the same time though. So,
that appears to be working fine.

Two images at the same time

Hi!
I'm new into FCE and I would like to ask for some help. Can I work with two images at the same time? I mean, Can I superimpose two images to make one? How can I do it?
Maybe this is something easy, but I'm just starting,
thanks in advance for your answers
Message was edited by: angelcotallo

Yes, you can. You can put one clip on top of the other in the timeline. You can make both clips visible by reducing the opposite of the clip or top, or by scaling back the clips so they are smaller. You can reduce the opacity and scale of the clips in the viewer by opening the clips from the timeline into the viewer. You can also scale the images directly in the canvas when it is in Image+Wireframe mode.

Advancing and Zooming multiple images at the same time.

Similar Messages

Maybe you are looking for