Advantage and disadvantage of using Sharepoint third party themes

Hi all,
Am planning to use third party themes and template to complete my development quickly. Can anyone recommend any good sites / vendor for theme available in market.? My project is going to have 25% customization for sure + Multi device- multi
browser + Multilingual support so do suggest me advantage and disadvantage of themes which your recommending please?
Thanks in advance
Regards,
Subbu

Hi,
Using third party themes can save your time, but it is not conducive to the expansion and demand change in the future.
It is recommend that customizing your own theme if you had enough budget.
The following links for your reference:
http://www.hartsteve.com/2013/06/sharepoint-rest-3rdpartythemes/
http://themeforest.net/
http://blog.creative-sharepoint.com/2013/05/creating-a-sharepoint-2013-theme/
Best Regards
Dennis Guo
TechNet Community Support

Similar Messages

I am a innkeeper at a bed and breakfast. we use a third party web reservation site. is there any way i can link this website to my calendar to where all web bookings will be uploaded to my calendar. i have the most recent software on my mac

I am a innkeeper at a bed and breakfast. we use a third party web reservation site. is there any way i can link this website to my calendar to where all web bookings will be uploaded to my calendar. i have the most recent software on my mac

Hi,
Does the website have a WebDAV feed of their calendar?
John M

Advantages and disadvantages of using views ???

Hi
What are the advantages and disadvantages of using views in ABAP porgramming ?
Thank You

hi,
Data about an application object is often distributed on several tables. By defining a view, you can define an application-dependent view that combines this data. The structure of such a view is defined by specifying the tables and fields used in the view. Fields that are not required can be hidden, thereby minimizing interfaces. A view can be used in ABAP programs for data selection.
More complicated views can comprise several base tables, the individual tables being linked with a relational join operation. If we dont specify the key fields, it takes time to fetch teh results.
Regards,
Sailaja.

Advantages and disadvantages of using Caringorm Framework.

Hi,
I am new to Caringorm framework.. In our project we need to make discussion whether to use Caringorm framework or a simpler architecture(flex à servicesàServer side) to use
Please let me know the advantages and disadvantages of using Caringorm framework from your experiences.
Thanks in advance.

hi,
Data about an application object is often distributed on several tables. By defining a view, you can define an application-dependent view that combines this data. The structure of such a view is defined by specifying the tables and fields used in the view. Fields that are not required can be hidden, thereby minimizing interfaces. A view can be used in ABAP programs for data selection.
More complicated views can comprise several base tables, the individual tables being linked with a relational join operation. If we dont specify the key fields, it takes time to fetch teh results.
Regards,
Sailaja.

Advantages and Disadvantages of using Nintex forms. is this product useful?

So my company has decided to start developing using Nintex products, we initially had Nintex Workflow and now they are thinking of purchasing Nintex forms. and i was asked to start trying it out.
I am currently midway through the development of a sharepoint app and i really like the REST APIs available in sharepoint 2013 as they enable me to develop using javascript and HTML5, quite basic stuff but very powerful.
Now they are asking me to try this black boxed product out, so i have to waste a couple of days on this...
I watched a couple of youtube videos and all they brag about is how easy it is to drag and drop components on the screen and visually design a form when this is the feature i care about the least. To me what counts most is how easy it would be to customize
the form to do something that was not foreseen in the black box product.
What are the advantages/disadvantages of using Nintex forms over using Javascript/HTML 5/Sharepoint REST ?
many thanks

With a developer hat on, I can appreciate that custom solutions can potentially be easier to build and manipulate, as you are not adopting anyone's framework and may have less constraints building with a blank canvas each time.
With a business owner or business analyst hat on, there are many advantages for using a product or application to build repeatable solutions such as forms.
SharePoint can quickly fall into demise if users (end user or super user) have free reign to build and deploy custom solutions, as they may or may not follow a consistent build pattern, and even other super users or developers can have difficulties interpreting
and adopting solutions, should someone (such as yourself) leave an organisation.
This is where products can provide significant return on investment. Products such as Nintex are built by experts in more than HTML, REST and JavaScript, but SharePoint as well. They provide a framework which ensures Form and Workflow designers follow a consistent
approach, and each solution can quickly be viewed and interpreted by other users.
Data gathering (forms) and workflow are also usually repeatable and work. I.e. in most organisation you need more than one of each. Products targeted to repeatable tasks are more efficient and accurate than custom code solutions and follow a more consistent
and defined approach in building t
Product solutions are continually developed and enhanced - which can be applied to existing creations. E.g. if Nintex Forms deploy an upgrade, all existing forms now have this functionality. There is no manual code updates required. That, and they are also
supported.
There is definitely a place for custom development in SharePoint, but for the purposes of quickly repeatable solutions such as forms & workflow, there should be a decent amount of analysis into requirements before taking the custom route.
Cheers

[Standby Database] Advantage and Disadvantage of using stanby redolog

Hi fellow DBA. I'd like to ask the disadvantage and advantage of using standby redo logs. I hope you could help me out. Thanks

Advantages
1. if your Standby needs to run on Maximum Availability or Protection modes you have to use the Standby redo logs
2. Redo data writen on the primary will be written to standby at the same time. therefore if you primary fails you have a fall back option without or minimum data lost.
(LGWR with Sync option on Maximum Protection will have Zero Data lost.)
3. It uses LGWR than ARCH process on the standby.
4. If you are using Cascaded Destinations (cascade Standby Databases - One standby sends the Redo to another Standby ) Then you have to use Standby redo logs.
5. Standby redo logs can create even after the standby database creation.
Disadvantages
1. Your Primary Has to Write data into two different Redo logs. Hence there will be a delay on the transaction response time.
(But with Maximum Availability and LGWR with aSync option will not wait the transactions to be commited on standby database) .
Refer the note 219344.1 Usage, Benefits and Limitations of Standby Redo Logs (SRL)
Hope you will have a fair idea about this

Advantage and disadvantage of using the utility RAID

Hello, I do need a little help.
I just got a new Mac Pro 8Core, with 6x8 GHz ram, two 2TB hard drives. I would love to know what would be the advantage doing RAID using the mac utility. Will the computer work faster and by aprrox. how much? Is there a disadvantage. Is it worth dong it?
Thank you in advance.
ME

In short, you can improve the performace of your mac by "striping" your drives in a RAID 0 configuration, but i would strongly advice against it, as it is not a fault tolerant configuration, meaning that if one of your drives fail, it will mean you loose all your data (yes even the data written to the healthy drive) because of the way it is written to disk in that config. And seeing you are using 2TB drives, I assume that is also your main storage.
If you are looking to improve the performace of your mac you should rather look in to getting a separate solid state drive for the system and application, and keep your documents and media on the 2TB drives. A SSD will usually reduce both the time it takes to boot your system, and the time to launch applications among other things, and is the single best upgrade for your already spiffy system. A 40GB drive should be just fine, but you would want to do some research first , as the performance can vary a lot among manufacturers.

Advantages and disadvantages of using only sequence files or working with sequence files in projects

Hello,
can anyone please tell me the advantage of using projects instead of just a sequence file? Do I need projects only if I have more than one sequence file?
Thanks a lot!

MGH,
Projects are meant to help with organization of TestStand files, but with the intention of use as part of a deployment of your test system. As the TestStand Reference Manual (page 2-5) puts it:
"In TestStand, you can create a workspace to organize and access your development files. A TestStand workspace file (.tsw) contains references to any number of TestStand project files. A TestStand project file (.tpj) contains references to any number of other files of any type.
Use TestStand project files to organize related files in your test system. You can insert any number of files into a project. You can also insert folders in a project to contain files or other folders."
John B.
Applications Engineer
National Instruments

Advantages and Disadvantages of Using Oracle 7 Client with Oracle 9 Server

Hello,
I was wondering what are the advanatges of using Oracle 7 client with Oracle 9 Server versus using Oracle 9 Client with Oracle 9 server.

Some years ago I used 7.3 Client with 9i DB, and I don't remember of particular problems, but I'm speaking of Sql*Plus only. Are there specific problems ?
Of course the best thing is to install one 9i Client (did you already do it ?) : if there are same problems, then that's not compatibility issue.
And what are advantages of using 9 Client with 9 server other than 7 is no longer supported.You're sure you won't have compatibility problems.
If you have access to Metalink have a look at [url http://metalink.oracle.com/metalink/plsql/ml2_documents.showFrameDocument?p_database_id=NOTE&p_id=207303.1]Note 207303.1

What are the advantages and disadvantages to using Snow Leopard?

My computer runs best on Snow Leopard but can also run Lion. It's a 2009 Macbook unibody model.

telephonedude98 wrote:
My computer runs best on Snow Leopard but can also run Lion. It's a 2009 Macbook unibody model.
Since it's a 4 year old machine, in it's end of life stage and 10.7+ will slow it down in performance, I'd say stay on 10.6.8 and be happy.
10.6 still has a rather large amount of the OS X version market share and Apple isn't doing what they did under Jobs was to ignore a OS X version still in significant market share.
Apple HQ and about 750,000 Mac's got compromised by the Flashback botnet, so Apple went all the way back to 10.5 Intel to fix the problems they neglected so now they are paying better attention to the older OS X versions.
There will ALWAYS be a newer OS X version with more bells, whistles and eye candy to drive a hardware purchase, however unless your machine was purchased within a couple years of a new OS X release, it's likley best to just kick back and enjoy what you have and make it last.
There are people out there still running 10.5 on PowerPC machines even.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
You can try to keep up with Apples asinine annual OS X release cycle, but it's only going to cost a lot more money in software, headaches and even bricked hardware, which occured to a LOT of people when 10.7 was released.
If a OS X upgrade bricks your machine and your not in AppleCare, your screwed.
http://roaringapps.com/apps:table
If your machine can't go to 10.8, then it can't do 10.9, so you'll be behind again here shortly when it's released this fall.

Advantages and Disadvantages of Proxy

Advantages and Disadvantages of Proxy
Hi Firends,
Could you please tell me the Advantages and Disadvantages of using Proxy, i need them urgently.
Note: High reward points will be given for each answer

HI,
Advantage:
The advantage of proxy is that it is send directly to the integration engine.There is no processing in adapter engine involved.
So the processing time is saved since there is no processing in adapter engine involved and that leads to a better performance.This is the biggest adavantage of the PROXY
Also we can use proxy only when we have SAP WAS>=6.2
Also it provides Excellent Error handling
They can be used for both synchronous and asynchronous communication
Whereas if u go for Idocs they can be used for asynchronous commn and rfc consumes lots of resources
Disadvantages
1) You need to write custom code. In case of IDoc scenario, you need to write custom code to post the IDocs.
2) Debugging may be difficult in some cases...
Plz rewards points
Vikas
Edited by: vikas jain on Jun 23, 2008 6:15 AM
Edited by: vikas jain on Jun 23, 2008 6:35 AM

Advantages and Disadvantages of Soap

Advantages and Disadvantages of Soap
Hi Firends,
Could you please tell me the Advantages and Disadvantages of using Soap adapter, i need them urgently.
Note: High reward points will be given for each answer

Hello
SOAP is an XML-based protocol for exchanging information in a decentralized, distributed environment. It was made for Web, a combination of XML and HTTP opens up new options for distributed data exchange and interaction in a loosely coupled web environment. SOAP is a technology that allows XML to move easily over the Web. SOAP does this trough an XML envelope for delivering XML content and specifying a set of rules for services to follow when they receive a SOAP message.
The fundamental change brought about by SOAP has been the ability to move data anywhere across the Web. Before SOAP there were only two main options for moving data between partners.
One was to build a wide area network spanning a broad geographic region and let the partners plug into it. This was the approach taken by EDI, which defined messages and protocols for data transfer but left the network details up to the partners. The result was a collection of networks that pretty much locked the partners in and made it difficult and expensive to reach out to other EDI networks and costly to bring in new partners.
The second approach for moving data between partners was to build a distributed object infrastructure than ran over the internet. This was the approach taken by Common Object Request Broker (CORBA), Remote Method Invocation (RMI) and Distributed Component Object Model (DCOM). The problem was that each had to decide on a protocol that could sit on top of TCP/IP and handle inter object communication. CORBA Chose Internet Inter-ORB Protocol (IIOP), DCOM chose object Remote Procedure Call (ORPC), and RMI chose Remote Method Protocol (JRMP). While this approach reduced the need to share the same underlying network, the drawback was that CORBA could talk to CORBA, RMI to RMI and DCOM to DCOM, but they neither could talk to each other nor directly to the web except through special sockets that required adding extra layers to an already complex architecture.
SOAP the third option, combines the data capabilities of XML with the transport capabilities of HTTP, there by overcoming drawbacks of both EDI and tightly coupled distributed object system such as CORBA, RMI and DCOM. It does this by breaking dependence between data and transport and in doing so opens up a new era of loosely coupled distributed data exchange.
SOAP Carries an XML RPC tradition by defining an XML language for packaging arbitrarily XML inside an XML envelope. Although SOAP does not depend on HTTP, the momentum behind SOAP is attributable to the fact that HTTP will usually be used for transfer protocol for SOAP messages.
SOAP is a transport protocol similar to IIOP for CORBA, ORPC for DCOM or JRMP for RMI.
SOAP differs from CORBA, RMI or DCOM in several ways.
IIOP, ORPC and JRMP are binary protocols, while SOAP is a text based protocol that uses XML. Using XML for data encoding makes SOAP easier to read than a binary stream.
1) Because SOAP is text based, it is able to move more easily across the firewalls than IIOP, ORPC or JRMP.
<p2) SOAP is based on XML, which is standard driven rather than vendor driven. Potential adaptors are less likely to fear vendor lock in with SOAP. </p2>
The net effect is that SOAP can be picked up by different transport protocol and delivered in different ways. For example, when used with HTTP it can be delivered to a web server, when used over FTP it can be deposited directly into a file system and when used with SMTP it can be delivered to a user's mailbox.
Many companies exchange data between established partners is proving totally satisfactory way to leverage the benefits of XML and the web. In this scenario the required are an agreed upon schema either DTD or an XML schema, for XML data being exchanged and the SOAP server capable of handling the incoming XML as it arrives over the web. Details about what kind of schemau2019s to expect and who will check the XML conforms to the schema are decided offline by individuals participating in the process. On the software side senderu2019s needs to be involved in packaging their data in an XML document. For those companies already storing data in XML, this should require only minimal effort. If the stored XML data is not in the form required by the agreement, an XSL Transformation(XSLT) style sheet can be programmed to automate the transformation.
SOAP messages define one way data transmission from sender to the receiver. However SOAP messages are often combined to implement patterns such as request-response. When using HTTP binding with SOAP, SOAP messages can use the same connection as the inbound request.
Regard's
CHETAN AHUJA

How to use third party themes in swing application?

I want to use some third party themes (like [http://www.javasoft.de/synthetica/themes/|Synthetica] ) in my swing appliaction. i am using eclipse ide, got the jar file of theme and added the following code(according to the readme file i got with theme) with my application code
try
   UIManager.setLookAndFeel(new SyntheticaBlackMoonLookAndFeel());
catch (Exception e)
   e.printStackTrace();
}but after this modification its showing the following error
The type de.javasoft.plaf.synthetica.SyntheticaLookAndFeel cannot be resolved. It is indirectly referenced from required .class fileswhat does this mean? i tried searching on net but cant really find any useful answers
Contents of Readme file:
System Requirements
===================
Java SE 5 (JRE 1.5.0) or above
Synthetica V2.2.0 or above
Integration
===========
1. Ensure that your classpath contains all Synthetica libraries (including
   Synthetica's core library 'synthetica.jar').
2. Enable the Synthetica Look and Feel at startup time in your application:
    import de.javasoft.plaf.synthetica.SyntheticaBlackMoonLookAndFeel;
    try
      UIManager.setLookAndFeel(new SyntheticaBlackMoonLookAndFeel());
    catch (Exception e)
      e.printStackTrace();
    }

It seems that you have the library that contains the SyntheticaBlackMoonLookAndFeel class, but you don't have the library which contains the SyntheticaLookAndFeel class which is needed by the LaF you're trying to load.
And their website even says in clear english: "The 'BlackMoon Look and Feel' can not be used standalone (without Synthetica)".

Advantage and Disadvantage of user login ID

Dear SAP expert,
I need some advice whether to use "employee no." or "name" to create SAP login.
What is the advantage and disadvantage of using employee no. ?
Thanks.
Rgds,

Hi Nitin,
A view can be thought of as either a virtual table or a stored query. The data accessible through a view is not stored in the database as a distinct object. What is stored in the database is a SELECT statement. The result set of the SELECT statement forms
the virtual table returned by the view. A user can use this virtual table by referencing the view name in Transact-SQL statements the same way a table is referenced.
For more information about the advantages and disadvantages of views in SQL Server, please refer to the following two articles:
http://www.c-sharpcorner.com/Blogs/10575/advantages-and-disadvantages-of-views-in-sql-server.aspx
http://www.toadworld.com/platforms/sql-server/w/wiki/10274.views-advantages-and-disadvantages.aspx
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Advantages and Disadvantages of BEx Analyzer

Dear All,
Please specify the ADVANTAGES and DISADVANTAGES of using BEx Analyzer for reporting over a browser.Does the analyzer provide better performance?generate exhaustive reports?and found better by users since it is excel based?
Yours truly,
Ratish
[email protected]
+919820827647

Hello Ratish,
The advantages and disadvantages are primarily based on the light weight client and heavy client.
Excel -
1. It is heavy weight and needs a client installation
2. Analysis is easier , as excel functionalities can be used over BI data
3. People who know excel will like this
Web-
1. It is light weight and no installation needed at the client as browser will be available
2. Can not analyze the data from the report ( you need copy to excel)
In simple analysts and expert users like excel.
Users who just view the report and no more analysis will be happy with web.
Regards,
Sheik Bilal

Advantage and disadvantage of using Sharepoint third party themes

Similar Messages

Maybe you are looking for