Advantage of using 1310 vs. 1242 for outdoor users

my customer wants to know what are the advantage of using the 1310 as AP vs using 1242 AP for outdoor users. We know that we can wired the 1242 internally within the building and extend the antennas to outdoor for outdoor users. I know that the 1310 is for outdoor but is there anything else that can help us get the client to buy the 1310 instead of using 1242. We do not do bridging.

The 1310 supports 802.11b/g only and 1242 have dual radios and by this support 802.11a/b/g. So this depends on the needs on your clients. If you dont need long antenna cable runs the 1242 could be enough and is also cheaper. Or put it in a NEMA enclosure and use PoE to feed it.
Look here for examples:
http://www.hyperlinktech.com/web/nema_enclosures_examples.php
Personally i would use 1242. We have replaced 1310 bridges with 1242 aps, because the 2,4Ghz band is too noisy.

Similar Messages

  • If I use the same iCloud account for my ipad and iPhone, will changes I make on one change on the other as well?  I'm not sure of the advantage of using teh same iCloud for both devices.

    If I use the same iCloud account for my ipad and iPhone, will changes I make on one change on the other as well?  I'm not sure of the advantage of using teh same iCloud for both devices.

    No, it only mirrors changes to synced data.  This includes mail, contacts, calendars, reminders, safari bookmarks, notes, iWork documents and data, and photo stream photos (assuming you choose to sync all this data).  Changes to iTunes data such as music, apps, podcasts, etc., are not synced using iCloud.  In your example, if you delete an app from one device it will remain on the other until deleted there too.

  • Can I use one itunes account for multiple users and multiple devices

    Can I use one itunes account for multiple users and multiple devices?

    The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....

  • How do I use the same profile for two users on the same computer

    I use my laptop both at home and at work. And in each venue I use a different user log on. But I wish to have firefox use the same profile for each user log on. How can I get firefox to point to the same profile for each user?

    Note that only one user (Firefox instance) can use a profile folder at the time, so if you would switch the Windows user to another account then you would first have to close Firefox.
    * http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
    * http://kb.mozillazine.org/Bypassing_the_Profile_Manager

  • HT1660 how can I use one single library for all users on the same laptop?

    how can I use one single library for all users on the same laptop?

    You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
    Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
    What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

  • Can i use my mac mini for some users at the same time?

    can i use my mac mini for some users at the same time? i mean with their own screen, mouse, and keyboard

    If you're asking whether more than one user can use the computer at the same time with multiple displays, the answer is no. Other users can log in over a network with Screen Sharing, but each one will need his own computer (not necessarily a Mac.)

  • Advantages of using Final Cut Pro for animation

    Is there anyone out there using Final Cut Pro 6 that could tell me what they feel are the advantages of using FCP 6 for animation as compared to Final Cut Express 3.5?

    Okay, cool. I was gonna use that in the first place but I'm still learning it and so far all I know how to do on it is clean up the audio. I'm going through a Soundtrack Pro book right now and had to stop because I couldn't continue without a microphone. I'm getting that microphone this week and by the time I have the next batch of audio files to edit I'll know what I'm doing in Soundtrack Pro.
    Thanks for the suggestion, I was seriously coming back to this question to elaborate for the sake of bumping this.
    Oh yeah, if Soundtrack Pro is the answer, is it possible to bypass FCP on the way in AND on the way out?
    Message was edited by: Etchie

  • Advantages of using BAPI over LSMW for data transfer

    Hellow,
    Can anybody please give an input for advantages of using BAPIs in data transfer compare to LSMW. If we use BAPI for data transfer of master and transaction data how it is more usefull compare to LSMWs developed.
    Thanks in advance
    Raghav

    Hi Raghavendra,
    Refer the links..may help.....
    [http://www.*******************/search?q=BAPIandLSMW+comparision]
    [http://www.*******************/search?q=bapi]
    Regards,
    Mdi.Deeba

  • Using LAP1242AG as RAP for Outdoor Mesh

    Hi,
    I am looking at building a outdoor mesh to provide free open wireless, the plan is to use two AIR-LAP1242AG mounted inside our building with external antenna's attached to the outside as RAP's, LAP1524SB's will be chained from the RAP's going in two different directions. I will use direction antenna's for the 5GHz backhaul and dipole for the 2.4GHz user network, but with the very last LAP1524SB in each chain will use a dipole for the downstream 5GHz backhaul with a couple of extra LAP1242AG's to provide extra coverage on buildings with the same AP inside and external antenna's.
    We will be using a 5508 Controller which also controls our internal wireless of AP 3502i's.
    Would this work? and is it a reasonable to use LAP1242's for the RAP's to save dollars? Any advice would be much appreciated.
    Thank you
    Allister

    One more thing, WCS?  Do NOT get WCS.  This product has been superseded by the Prime NCS.
    Whether or not you should consider the VM-version or the hardware version will depend entirely on the number of WAPs you plan to have. 

  • Advantages of using a seperate controller for guest access?

    Can someone give me a good reason to use a seperate controller in a DMZ for guest users versus just trunking a DMZ VLAN to the controller. Certainly it makes sense to have a guest controller when you DMZ is not accessable to the controller locations (or you have a bunch of remote locations, but only one internet connection), but in the event that the controllers are located in a place that it can hit the DMZ is there a good reason to use a guest controller.

    I'm not even sure if that is a good reason. You can alway trunk to another non-routed VLAN and stick a cable modem and firewall to give guest user access. I'm working with someone now that thinks this is the way to go, but I've got to add a 4402-12, a switch (need GB connectivity for the controller) at a minimum. Again, it would make perfect sense if the location of the internet was not in the same building.

  • Use 1 itunes library for multiple user accounts

    Is there a way to use 1 library for multi-user accounts on mac osx? I have 4 iphones and was previously using the main account only. I'm getting tired of having everyones contact lists downloaded into my main phone. I can't seem to figure out how to sync the music to the same library.

    Hi There,
    I sync 2 iphones with the same library, and to stop the other iphones contacts adding to mine I have two groups in the address book, one has my contacts in and the other my friends. I then just sync the appropriate address book in the info pane when the iphone is plugged in.
    Hope this helps.

  • How to use ISE Guest Portal for AD users

    Hi there,
    As  subject explains all, I want to use ISE Guest Portal for my domain  users. I have tried many different ways to authenticate users and  finally I came to the conclusion that ISE CWA works pretty well and is  very stable. WLC Webauth sucks alot, does not redirect to the login page  always.
    Can  you please share what other ways are stable ways to authenticate AD  users? I know about WPA 802.1x authentication but that requires a CA in  the network which is not available at the moment. So can you please  Suggect?
    Otherwise,  I want to use ISE Guest Portal for my AD users as well. AD is already  integrated to ISE, the issue happens when I attempt to athenticate using  AD user account, the user gets authenticated but the Guest Portal  redirects me to Device Provissioning page and there it shows an error  saying "there is not policy to register the device, contact system  admin"
    Am I missing something??
    I am running WLC 5760 with ISE 1.2
    Thanks in advance..

    Hi,
    Can you post a screenshot of your current policies? Also for 802.1x authentication although it is best practices you do not have to have an internal CA to make this solution work. You can disable the option to "validate server certificate" or you can use a trusted CA to sign the certificate for the eap interface.
    In most cases 802.1x is the method to go because it provides dynamic authentication without forcing users to redirected to a web page multiple times throughout the day, scenarios such as computers that sleep or users that are mobile will not have connectivity until they redirect to the portal if one of the scenarios exist. You also gain WPA encryption on your WLAN, if you are using strictly layer 3 web auth you run into issues where encryption is not used and rely on encryption from the application as your method of data integrity and security.
    Thanks,
    Tarik Admani
    *Please rate helpful posts*

  • InteractiveForm element used in WDA empty for specific user

    Hi!
    We have a WDA application that consists of several forms to fill out, and the data from the forms are then filled into Adobe Forms displayed in the WDA as a summary through an element of the type InteractiveForm. The application uses 4 different Adobe Forms templates.
    The adobe forms have layout type ZCI layout, the interface are XML schema based and generated based on the context of the WDA.
    For most users this works all fine, but for one specific user the InteractiveForm element always displays blank for one specific form-template. This only happens in production-system, and not in the QA-system.
    There are no error-message displayed to the user, and no dump in ST22. I've also looked at the logs in our ADS, but can't find the request to create the Adobe Form there at all.
    [This is how it should look|http://www.flickr.com/photos/tomstensrod/3079673106/] and [this is how it actually looks.|http://www.flickr.com/photos/tomstensrod/3078847943/]
    Anyone experienced this or can give any input to how we should progress to find the cause and remove the problem?
    Cheers
    Tom

    Sid,
    Can you check below SAP note if can help
    534659 - CJ9ECP/CJ20N: Display - Different default values
    Regards
    Tushar

  • Why does Firefox 31 change all PDF icons and opening in browser, require a fix using REGEDIT to fix for ALL USERS on a computer?

    The solution to use REGEDIT in the question linked below almost fixed my trouble with PDF files on over 30 computers, with several users on each computer:
    https://support.mozilla.org/en-US/questions/1013642
    But I needed to fix it for ALL users on a computer, without logging onto each account, on each computer. My fix was to logon as administrator and change the following system-global key instead:
    HKEY_LOCAL_MACHINE\Software\Classes\.pdf
    Name: Default
    Type: Reg_SZ
    Data: FirefoxHtm
    Changed the data from FirefoxHtm to AcroExch.Document.11
    I use Adobe Reader XI on Win7 Pro, 64-bit machines.
    The problem started when I ran a downloaded file to install the new version of Firefox on the computers.
    Why would Firefox require me to use REGEDIT in this manner to fix the problem?

    This only happens when you set Firefox as the default browser and Firefox thinks that there is currently no application the handles PDF files.

  • Using Oracle Apps Adapter for apps_applcon user

    Hi,
    We are trying to use oracle apps adapter for our BPEL flows using FM11g (Jdev11gR1). We came to know that it will work for only apps user.
    We have apps_applcon user. How can we use that?
    Is there any way we can tell oracle apps adapter to user apps_applcon user?
    Any help would be greatly appreciated.
    Thanks in advance.
    Thanks & Regards,
    Rama Krishna. P

    We also have same requirement. We have BPEL connection using custom oracle user, xx_b2b and when we use APPS adapter, I can not see and use any business event.
    If anybody across same requirement, please share your experience.
    Appreciate help on this.
    Thanks,
    Sonartori

Maybe you are looking for

  • How do you make a gradient background on a button in flex 4

    Hey everyone, this is driving me crazy. Below is my css for a button in file.  I want a gradient background on a button in flex 4. I can not for the life of me figure out how to do this. There is no longer the backgroundColors option. chromeColor is

  • Playlist shuffle for Ipod Nano?  or am I stuck with same order of songs?

    Is there a shuffle option for the nano where I can vary the order of the songs played? It gets really onld knowing which song is going to come on next.

  • Is there a way to make a chart relative?

    There are a lot of MBean attributes that are monotonically increasing (like messages processed, number of requests, etc.). Is there a way to graph or chart those values in a delta format? For example if the attribute is 102 messages for one graphing

  • No sound in Bootcamp Windows 8.1

    Hi. I recently installed Windows 8.1 on my Macbook Pro, late 2011 model and ran the Bootcamp software. Everything works great except there is no audio playing at all, I have an X mark on the volume control, troubleshooting results in a 'A recent hard

  • Mail gets hung up and won't quit completely

    More times than not when I try to quit mail all the windows will close but the "Mail" button in the toolbar remains highlighted and it just won't finish quitting. I typically have to finally Force Quit the app. Also when it is in this state and I try