Advantages of having ECC 6 as backend

Hi,
We have SRM5.0 and backend is 4.7. There is proposal of going to ECC 6 could you anyone let me know the advantages or disadvantages of having the same as backend.
If there is any link please let me know.
Ingen

Hi
It is one of the main advantages.
ECC 6.0 is Unicode sytem but SAP 4.7 is a non unicode system.plz check via system status.
There are lot of advanges on IS (industrial solution) with in built with ecc 6.0 . 4.7 may not support by sap for long time.in 4.7 you have install IS
srm 5.0 and ecc 6.0 good combination.
regards
Muthu
Edited by: Muthuraman Govindasamy on Sep 13, 2008 9:23 AM

Similar Messages

Additional advantages of having SRM in EBP 5.0 compared to EBP 2.0

Hi,
I have just started working on SRM.
Please can anybody help me out by telling the additional advantages of having SRM in EBP 5.0 than having SRM in EBP 2.0 in the foll topics-
   Create & Approve Shopping baskets in EBP System
      - Office Supplies (Staples Punch out catalog)
      - Janitorial Supplies
      - Safety Supplies
      - Packaging items
      - Procurement of Pallets
      - Footwear
      - Paper Products
      - Free Text items (Describe Requirement)
      2 Level Approval Process for all Shopping baskets having value >
1.00 USD
       Account Assignment Category as Cost Centre for all Shopping
baskets
       Leading PO gets created in R/3 ( Classic Scenario)
       All other Follow - On Documents created in R/3 System
       Having both Internal & Punch Out Catalogs (Staples)
your help will be highly appreciated.
Message was edited by: kavita agrawal

Hi Kavita,
As far as I know about the SRM Benifits I am telling u please go through the details.
Before SRM these were the Business Challenges.
Inefficient processes
Manual processes within the company and with suppliers
Manual internal system interfaces
Long procurement cycle times
Roles not standardized for best practices
Value leakage
Off-contract purchasing
Disseminated user requirements and unconsolidated demands
High company-wide level of safety stock
Supplier Disconnect
Offline collaboration
High incidence of unplanned expenditures for services
Offline or disjointed supplier evaluations
Organization not empowered
Lack of visibility into the process or purchasing progress
Reactive management of purchasing staff
To overcome these challanges SRM implemented and SRM is having certain Benefits.
Strategic Purchasing & Sourcing
Supply strategy development
Spend analysis
Supplier selection
Contract management
Catalog management
Operational Procurement
Self service procurement
Services procurement
Plan driven procurement
Supplier Collaboration
Supplier registration
Design collaboration
Order collaboration
Collaborative replenishment
Supplier connectivity
Improve spend visibility and supply strategy
Supply Strategy Development
Demand aggregation & planning
Portfolio analysis
Purchasing strategy planning
Category management
Program management
Purchasing controlling and risk management
Spend Analysis
Global spend
Content consolidation
Reduce errors and compress sourcing cycle times
Supplier Selection
Supplier qualification
Request for quotation / information / proposal
Real time Reverse auctions
Sourcing event analysis
Manage contract compliance
Contract Management
Contract development
Document management
Contract distribution
Contract execution
Contract monitoring
Catalog Management
If this will solve ur purpose award the point for the same.
BR,
Vijay Mittal

B2B with ECC 6.0 backend error

Hi,
I receive the error "No customer found with customer number" when I try to checkout, with my shopping cart.
This is an internal POC. I've configured the UserManagement as 'R3_SU01User'. I've configured r3standardpitrex in B2B XCM configuration. I've maintained Shopadmin as well.
I know the problem has to do with "security". I've created a user on SU01, but if I add a customer number (KNA1) to the Goto>References button, I can not log onto B2B. It gives me the following error:
- A serious system error has occured
- The shoplist read from buffer if empty
-Contact the administrator
If I remove the KNA1 entry, I can log onto the shop. I am able to browse my catalog & add to the shopping basket...I just can't create a sales order because I'm not associated with a customer.
ECC 6.0 Backend
NetWeaver Java 7.0
Thanks for any help!

Please check note [1303890|http://service.sap.com/sap/support/notes/1303890]
Regards
Mark
Edited by: Mark Foley on Aug 20, 2010 4:31 PM
Edited by: Mark Foley on Aug 20, 2010 4:31 PM

What are the main advantages of having multiple WLS_FORMS instance servers?

Hi,
I know it's possible to deploy multiple instance weblogic forms servers (WLS_FORMS). What are the advantages of having multiple instance of forms server?
When we deploy forms&reports 11g the configuration process creates WLS_FORMS and WLS_REPORTS. Is there any advantage of having under the same physical server more than one WLS_FORMS server?
Regards
Ricardo

The exact advantages and disadvantages will depend on exactly how you configure your environment. Remember that everything good comes with a price. So for example, you can add additional managed servers to improve scalability, but doing this means consuming more system resources. So although you may now be able to service twice as many users, it may have cost you 1gig of RAM or more (just an example).
I would recommend taking a look at the documentation as it offers a pretty good high level view of the possible configurations and their advantages. Here is a good starting place:
http://download.oracle.com/docs/cd/E14571_01/web.1111/e13716/understand_domains.htm
The complete documentation set for FMw 11.1.1.3 and WLS 10.3.3 can be found here:
http://download.oracle.com/docs/cd/E14571_01/index.htm

BD64 issue having ECC + BI on the same client

Hi there,
We do have a small instance having ECC and BI in the same System.
The ABAP RFC connection is fine and when Replicated in RSA1 Datasources from SourceSystem R3 went fine.
But I think we have an issue with the Idoc settings.
Went through the doc [http://ecohub.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/908836c3-7f97-2b10-4cb8-e6790361c152?quicklink=index&overridelayout=true] and found that when BD64 it asks me the Sender / Receiver to be different.
Though as mentioned in our case it is the same.
It is really needed to update these settings in BD64 when both systems are in the same System?
Thank you,
A.

Hi Asik,
Thank you for the reply.
Yes, that is right.
We access BW and R3 through the same logon.
I found the issue though !!
Would explain it in case someone faces a similar issue.
1- The ABAP RFC connection was fine.
    Tested and transfered the DataSources fine.
2 - though there was still an issue with table RSBASIDOC not showing Transfer Structure field.
Solution:
Read
     u2022     http://ecohub.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/908836c3-7f97-2b10-4cb8-e6790361c152?quicklink=index&overridelayout=true
     u2022     Setting up Connection between BW and R3 for Data.pdf
     u2022     Step by Step on Changing ECC SourceSystem without affecting Datamodel Objects in BW.pdf
Followed the post:
Step by Step on Changing ECC SourceSystem without affecting Datamodel Objects in BW
1. Go to WE20 and check whether Partner profile T90CLNT090 exist in LS type,if not just add Parnter profile with same and save.
Partner profile Name: T90CLNT090
TYPE: LS
Give:
Ty: US
User: User Name
Lang: EN
and Save.
2. Again re-click on Partner Profile: T90CLNT090
you will see ,there will be some entries in Inbound & out Bound Tabs.
Delete the following from outbound:
1.RSRQST
Delete the following from inbound.
1.RSINFO
2.RSSEND
and save your partner profile.
3. now execute - RSA1, it will ask to active Workbench. Just activate it . it will work now.... Cheers.

Any advantage to having website hosted by a Mac OS X Server webhost?

With Leopard on it's way and the likes of iChat Server supporting relaying, is there any advantage to having our domain hosted with a Mac OS X Server webhost? For instance would we then be able to use iChat Server with our domain name?
I'm thinking about putting a little pressure on our webhost to provide Mac OS X services.

I'm no expert on web hosting (or anything else to do with web services but I would have thought that the only way to take advantage of all the Leopard stuff would be to lease a whole machine to yourself (or get them to host your own machine). I cannot see how a hosting company could use a single server for multiple customers, thereby reduce hosting cost per customer.
-david

Clariffications in MM SUS Scenario with ECC 6.0 backend and SRM 5.0

Dear Team,
We are implementing MM SUS Scenario with ECC 6.0 backend and SRM 5.0
We need to following clarifications
1 Once we create ASN in SUS, how to cancel the ASN. We are not able to see cancel button for ASNs
2 When we create GRN in ECC against the inbound delivery and perform Return Delivery, this Return Delivery is getting updated in SUS. But the ASN status is not changing to canceled. We are not able to perform new ASN for this. Also invoice is being allowed for these ASNs. How to control the same.
Request your inputs please
Regards,
Ravi

HI can you tell me how you get it solve?
thanks in advance.

What the advantages of having an BAPI over Other data migrations

What the advantages of having an BAPI over Other data migrations

Th advantages of BAPI
1. Simple to use (its just an FM)
2. Not cumbersome like bdc
where we have to record each and every screen
sequence.
3. SAP guarantees the consistency
of bapi in future releases.
One of the big plusses for BAPIs is that the interface and function are not supposed to change. This is a big plus when you do upgrades or hot packs because the transaction can change (format, required inputs etc) which means you then need to update the call transaction.
Some of the BAPIs are better documented and easier to use than others.
You usually need to perform the BAPI that actually does the COMMIT after you call your BAPI.
The Program coding for calling a BAPI is usually cleaner than setting up the screen flow etc for the Call Transaction.
You don't need to worry about special data circumstances interrupting the normal data flow of the screens and causing errors because of that.
BAPIs probably have better performance since they don't do the screen flow processing.
In general if the BAPI exists for the transaction you want to perform and you can figure out how to use it the BAPI is probably the best way to go.
This is just from my experience working with both BAPI and Call Transaction. I have had some very good successes with BAPIs, but very occasionally found that I could not get the BAPI to perform the update I needed.
Refer the transaction BAPI for detail information.
You can also refer to below links:
http://www.sapgenie.com/abap/bapi/example.htm
Basic learning guide:
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
BAPI intro:
http://www.sappoint.com/abap/bapiintro.pdf
Overview:
http://www.planetsap.com/Bapi_main_page.htm
Also have a look at the following link :
http://www.planetsap.com/LIST_ALL_BAPIs.htm
Go through the following Document
Bapi to create customer master
BAPI_CUSTOMER_CREATEFROMDATA
BAPI_CUSTOMER_CREATEFROMDATA1
Or you can use FM SD_CUSTOMER_MAINTAIN_ALL
what is BAPI?
BAPI stands for Business API(Application Program Interface).
A BAPI is remotely enabled function module
ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access.
Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects.
You create business objects and those are then registered in your BOR (Business Object Repository)
which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA.
In this case u only specify the business object and its method from external system
in BAPI there is no direct system call. while RFC are direct system call.
Some BAPIs provide basic functions and can be used for most SAP business object types.
These BAPIs should be implemented the same for all business object types.
Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs.
Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values,
for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved
and returned to the calling program.
The instance is identified via its key.
The BAPI GetDetail() is an instance method.
BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed
so that they can be called several times within one transaction.
For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction,
the second BAPI call must not affect the consistency of the sales order 2.
After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type,
for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type,
for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database
or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type.
The instance to be cancelled remains in the database and an additional instance is created
and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst!
ance and the BAPI and Remove<subobject> removes a subobject from an object instance.
These BAPIs are instance methods.
Check these Links out
http://searchsap.techtarget.com/ateQuestionNResponse/0,289625,sid21_cid558752_tax293481,00.html
http://www.sap-img.com/abap/interview-question-on-bapi-rfc-abap-objects-tables.htm
http://www.sap-img.com/fu033.htm
http://www.sap-img.com/abap/ale-bapi.htm
Please check out this thread..
Re: bapi
Also refer to the following links..
www.sappoint.com/abap/bapiintro.pdf
www.sap-img.com/bapi.htm
www.sap-img.com/abap/bapi-conventions.htm
www.planetsap.com/Bapi_main_page.htm
www.sapgenie.com/abap/bapi/index.htm
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
Java Connector(JCO) can call not only BAPI's but also the function modules which are remotely enabled..
BAPI's as i said earlier are remotely enabled function modules..
Hence, JCO can call also BAPI's(n not only BAPI's as u mentioned).
Check the following BDC over BAPI
The steps to be followed are :
1. Find out the relevant BAPI (BAPI_SALESORDER_CHANGE for VA02).
[for VA01 use BAPI_SALESORDER_CREATEFROMDAT2]
2. Create a Z program and call the BAPi (same as a Funtion module call).
2. Now, if you see this BAPi, it has
-> Importing structures.
eg: SALESDOCUMENT: this will take the Sales order header data as input.
-> Tables parameters:
eg: ORDER_ITEM_IN: this will take the line item data as input.
Note :
Only specify fields that should be changed
Select these fields by entering an X in the checkboxes
Enter a U in the UPDATEFLAG field
Always specify key fields when changing the data, including in the checkboxes
The configuration is an exception here. If this needs to be changed, you need to complete it again fully.
Maintain quantities and dates in the schedule line data
Possible UPDATEFLAGS:
U = change
D = delete
I = add
Example
1. Delete the whole order
2. Delete order items
3. Change the order
4. Change the configuration
Notes
1. Minimum entry:
You must enter the order number in the SALESDOCUMENT structure.
You must always enter key fields for changes.
You must always specify the update indicator in the ORDER_HEADER_INX.
2. Commit control:
The BAPI does not run a database Commit, which means that the application must trigger the Commit
so that the changes are read to the database. To do this, use the BAPI_TRANSACTION_COMMIT BAPI.
For further details... refer to the Function Module documentation for the BAPi.

RSA1 - ECC 5.0 Backend "Source System" shows up as a BW System?????

Hello,
I'm working in RSA1 on my development BI system (BID) building a source system connection to our R/3 (ECC 5.0) (DEV) backend system. I've got the logical systems defined and assigned, clients opened, and users built.
Here's the issue:
When I build the connection to the backend ECC 5.0 system, it's coming up as a BIW system (see Message Test below - that' from the log)
My question is - is it seeing it as a BW System, versus an R/3 System, because in ECC 5.0 BIW is integrated / delivered within ECC 5.0?
Cut-and-paste from the log entry where
Message Text
Creating logical Business Information Warehouse on source system PRDCLT100

Hi Ajay,
I first click the scroll note button above "Display Node Log" then see the second message in the log below which says "Creating logical Business Information Warehouse on source system ........"
All messages there are status "green" i.e. informational versus warning or error..

ECC 6.0 (backend) upgrade

Hi all
We have recently upgraded to BI 7.0 and using only 3.x datasource . We are in the process of upgrading our backend R/3 4.6c to ECC6.0.
Question: Is there anything that we should be looking out for when we switched to ECC 6.0 on the backend? Examples are deltas not working, comm. Structure / transfer structure out of sync. Etc?
We are not going to re-replicate any meta structure from BI side.
Thanks
Larry

Some Insights
1)clear the Delta loads before upgrading your R/3 System as you could lose some delta's if you don't .
Emptying the Delta queue means stoping the update jobs (V3, for example) and executing the Deltas in BW until there are 0 records on them. Normally it takes a couple of loads in BW to make them "0" in R/3.
The update mode doesn't affect the Delta Queues or the extraction to BW. It's just the way new or changes records are allocated in the queues. Only a change in the structure of your Datasource would impact your Delta queue and extractions .
2)GL - check with if the NEW GL is configured as in that case you might have to use FAGLFLEXT table related extractors and new cubes
3)Make sure you have the latest kernel, for the support pack you will get the
standared notes availale in the SAP support market place.
- As a prerequisite you need to upgrade your DB and OS as suggested in the
standard upgrade manual
- follow the ASAP methdology for upgrade, first upgrade the development system
followed by Quality and Production.
Refer the following links to get more details
http://service.sap.com/upgrade
http://service.sap.com/erp-upgrade
Hope it Helps
Chetan
@CP..

Advantages of having SAP R/3 related with SRM and CRM

Hi:
I wish to know what are the main advantages for my industry of having SAP R/3 if my main clients and suppliers also have SAP R/3. How SRM and CRM work here?.
Thank you,

Hi
SAP R3 is used for logistics of a organization, human resources,purchases and production,fianance,management,materials management.
when bsuiness process is automated by SAPr3 it will reduces time, so less time consuming,faster, high quality when compared to manual business process, when your client also use same environment it will reduce the data migration and data missing, data synchronization,to rectify this lot of human resorces reqd and more time consuming for data migration
so when compared to diffrent environments sap>oracle extra mainatning same environment lesess the time, improves data quality and efficiency less man power.

Advantages to having Windows XP on my iMac

I'm thinking about installing Windows XP on my intel iMac using the software program Parallels. But before I do, can anybody here tell me what the advantages are of having Windows XP on my iMac? I don't have anything against Windows, I just want to know what is the difference between the two operating systems. What can I do in XP, that I can't in OS X?
Sorry if this is the wrong group to post in.
Thank you.

Charles:
I can tell you why I installed Windows on my Mac and this is simply my opinion. My work atmosphere is 100% in Windows. We use Microsoft Office products along with proprietary software which ONLY runs on the Windows platform. I am not willing to use Office for Mac at home and then play the convert from here to there game. I also like MS Money which is not available for a Mac and I am not willing to use Quicken etc.
Finally, the Windows platform (right or wrong) has a HUGE selection of software. I don't wish to take anything away from Apple however given my needs and requirements, it became imperative that if I were to own a Mac then it must be able to run Windows also. Allows me to get the best of both worlds.
I think the answer to your question must come from you as you know which software you use and may use in the near future. If Leopard suffices your needs then fine and if it doesn't then you have an option to load Windows.
Axel F.

Advantage of having OCR and Voting disk on ASM

What are advantages of putting OCR and Voting disk on ASM from 11g

well, other than the sharing thing, you dont have to go RAIDing an additional shared disk either. If you have properly configured ASM, redundancy should be built in as well, either soft or hard.
not sure what other advantages you may need. Theres the IO thing with ASM, buit thats not really an advantage persay with ocr and vote. I may be contradicted by others but Ive never seen performance hit of any kind attributed to ocr and vote on non-ASM disk.

Advantages of having SAP Enterprise Portal

Hi All,
I really appreciate your help on the below please;
I have 7 years exp in SAP ABAP;
2 years in SAP PI
Company is about to give me SAP Enterprise Portal training for the next project;
Do you think it is worth for me to have SAP Enterprise Portal experience for my future;
if that is the case would you tell me the types of SAP Enterprise Portal trainings available in the market;
like SAP Enterprise Portal Admin / SAP Enterprise Portal development
Thanks
Iver

Hi
SAP R3 is used for logistics of a organization, human resources,purchases and production,fianance,management,materials management.
when bsuiness process is automated by SAPr3 it will reduces time, so less time consuming,faster, high quality when compared to manual business process, when your client also use same environment it will reduce the data migration and data missing, data synchronization,to rectify this lot of human resorces reqd and more time consuming for data migration
so when compared to diffrent environments sap>oracle extra mainatning same environment lesess the time, improves data quality and efficiency less man power.

HT204053 Are there advantages to having two Apple IDs, one for iCloud and one for Store Purchases?

I bought my new Mac through our company and created a new ID for it, thinking that I am likely in future to need other Apple products for the business, but I already had an ID for personal use, as does my husband, who also works for our company.
I understand that for us to receive our emails separately we need to use our personal IDs for iCloud, but althought the vendor confirmed it was possible, I did not understand from him whether it was a good idea from a business point of view for us to use the business ID for Store Purchases.
If anyone does this, I'd be really grateful to know why you find it useful.

If you want to move your iCloud account to another existing ID you'll have to delete the existing account, set up a new account with the other ID, then upload your data to the new account. To do this, begin by going to Settings>iCloud and turn all synced data (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your phone. After everything is turned off you can scroll to the bottom and tap Delete Account. Then set up the new account with your other ID and turn syncing for calendars, contacts, etc. back to On. When prompted, choose Merge. This will upload your data to the new account. Note: this will not migrate your photo stream photos. You will need to save these prior to deleting the existing account.

Advantages of having ECC 6 as backend

Similar Messages

Maybe you are looking for