Advice a scenario for retrive a status of mapping.

Hi all.
Source (IDOC) --> Mapping ---> sending ---> Target(XML)
(IDOC) <-- SYSTAT <--|
(IDOC) <-- SYSTAT <----
|
I need a help for upper case.
In the Case, We wana receive a staus Mapping & Sending Result for IDOC by each step.
For reference, Scenario use asysnc interface.
At beginning I thought BPM with correlation, but corelation was not fit for it.
In addition I knew that there is no way to retrive return code of the mapping status.
How can I get Mapping Status and tranfer it next step?
And, How can I design scenario efficently?
If you got a good scenario or other way, pls notice me.
regards.
Message was edited by: ChangSeop Song

solved for myself

Similar Messages

Configuration Scenario for BPM Using Integration Scenario

hi All,
I Have an Scenario where i am using BPM. Most of the blog tells about manually creating all Configuration objects. I had created an Integration Scenario for this scenario by referring to the earlier threads available for same.
Hoe to Create Integration Scenario for BPM Scenario
Integration Scenario in BPM and few more.
My IS looks like
Sender App Component - Integration Process - Receiver App Component
Now when i am trying to create Configuration scenario for same using model configurator, i am getting Model as "Not Configurable"
And when i click "Configurability Check" Button, i am getting below as status:
Component view IS_POC_BPM: Connection from receivePayload to getABSPayload does not have an inbound service interface
Component view IS_POC_BPM : Connection from sendABSPayload to getPayload has no outbound interface
getABSPayload and sendABSPayload are actions for Abstract interfaces.
IS_POC_BPM is the Integration Process Name.
Also in Integration Scenario, when i create connection between sender action to BPM action there is no inbound interface coming. And viceversa.
Please help me in identifying if i am doing any thing wrong in creating this scenario.
Is it possible to create Configuration Scenario for BPM Using Integration Scenario?
Thanks,
Mayank
Edited by: Mayank Gupta on Apr 21, 2010 6:35 AM

I think you shoudl refer the available Integration Scenarios created for BPMs in IR --> SAP BASIS --> http://sap.com/xi/XI/System/Patterns
Sender template will have the Action with Outbound Service Interface and then in the BPM Template the action will have Inbound Interface.....then within the BPM itself this inbound will be mapped to Action with Abstract Interface
may be after looking the Integration scenarios you will get more idea
Regards,
Abhishek.

Idoc test scenario for MM invoice verification

Dear Experts,
I am doing a scenario for testing the inbound process for Invoice ( MM ).
If any body has done this test idoc prcoessing for the scenario, i need your valuable help in how to go about this.
In simple, how to do the WE19 for MM invoice verification.
Regards
RAj

hi,
Pls check this link,Hope it helps
Test IDOC inbound processing in WE19
No status record was passed to ALE (Working fine in WE19)
thanks.

Problem to repatraite the items for shopping cart status Held

Hello all experts,
In a scenario standalone I have a problem to repatriate the items for my shopping cart that have a status held.
I verify the data of item and catalog we don't have a difference for pricing product etc ......
If I repatriate item I see never data for my new shopping cart.
For other informations status for item is To be Processed.¨
Please help for this problem for all experts.

Hello Steve,
To remove action from specific workitems, you can do this in the UWL configuration file.
1) Download the configuration file (in ZIP format). Go to:
System Administration > System Configuration > Universal Worklist & Workflow > Universal Worklist Administration
Click to "Administrate Item Types and View definition".
Then download file 'com.sap.pct.srm.core'.
2) Navigate to each WI you would like to change:
- <ItemType name="uwl.task.webflow.srm.TS40007952"... (SC Completion)
- <ItemType name="uwl.task.webflow.srm.TS40007953"... (SC Approval)
- <ItemType name="uwl.task.webflow.srm.TS40007954"... (SC Approval)
3) Within those item types, put a new property to action reference "reject" for 'Actions' definition like below:
<Properties>
<Property name="display_order_priority" value="uwlExcludeFromPreviewDetail" />
</Properties>
4) Save and upload file again.
Regards.
Laurent.

Costing is not allowed for material/PPS status - Message no. CK 399

Hi Experts,
I am getting the following error when doing a costing run via CK11N:
Costing is not allowed for material/PPS status
Message no. CK 399
Diagnosis
Material XXXXXX in plant XXXX has material status Y1. The setting for this status is such that costing cannot be carried out.
Procedure
Check the material status in the costing view and MRP 1 view in the master data record of material XXXXXX in plant XXXX (Field MAT/PPS status)
I have already checked the status of the material in both costing and MRP 1 view via MM03. Plant-Specific Material Status is Y2 (Material productive). I am not sure if the statuses are standard but I hope anyone can advice on the solution if you have encountered this one already.
Thanks,
Josef

Hi Josef,
Please go to OMS4 and check the material plant specific status for Y1 and Y2 for Mat. Cost Estimate Procedure.
Also check components of BOM for plant specific status it should be Y2 for all you components.
One of the materials to be costed has a material/PPS status which does not allow a cost estimate.
CS03 you can check the BOM components and CS12 for multiple BOM explosion.
Regards,
R.Brahmankar

How to use pre-defined scenarios for RosettaNet with XI 3.0

Hi all.
   I am working in Comgroup Shanghai co. ltd. which is partner of SAP China.
   We have a potential customer who use RosettaNet as their Supply Chain EDI system.
   I would like to make a demo for demostrate the pre-defined scenarios for RosettaNet RNIF 2.0 packages.
   Where can I find such guideline ? I have checked the article: implementing RosettaNet with XI 3.0, but it cannot help me.
   Another question is how I can develop my own scenarios for the RNIF standards which are not included in XI RosettaNet business package ?

Hi Andy,
See the instructions below after you installed the RosettaNet STK.
Below given is the sample config for PIP3B2 Scenario. Part I is using STK and Part II is using 2 XI systems.
<b>Part I. Test Using STK</b>
In your XI ID:
1) Define both the parties 1) Shipper(Your Partner) 2) Receiver(Your company) with identifiers like DUNS Number.
2) In ID goto>Tools>Transfer Integration Scenarios from IR-->select the scenario "PIP3B2_Receiver" from the drop down list.
3) Follow the 4 steps in the config wizard.
4) While creating your CC, create it from the channel template delivered with the RosettaNet BP.
   4.1) Specify the URL for STK which should be in the following format
http://<STK Server>:<port>/rosettanet/servlet/listenerServlet?userId=<Party Name>
   4.2)In the location fields, enter your location and your partner location.
In your STK
1) Start the RosettaNet STK.
2) enter the UserID<Partner Name in XI>
3) Select the Test Scenario, 3B2V01.01-AdvanceShipmentNotification-0001-Scenario-Shipper
4) Enter Global Business ID(DUNS Number) and Location ID for both the partners. These fields should be same as in your R/3 Party configuration.
5) Enter the URL as follows:
http://<XI Server:<J2EE_Port>/MessagingSystem/receive/RNIFAdapter/RNIF
If everything is configured correctly as mentioned, you should be able to test your single-action scenario.
<b>Part II Test using another XI System</b>
For these follow the steps above for XI Config.
Configure one XI System as PIP3B2 Shipper using the Scenario "PIP3B2_Shipper" and config wizard as mentioned above.
Configure the other XI as PIP3B2 Receiver using the scenario "PIP3B2_Receiver" and config wizard.
In the Url field, specify the URL as follows:
http://<XI host>:<J2EE_Port>/MessagingSystem/receive/RNIFAdapter/RNIF
Hope this helps.
Regards,
Sam Raju

Table for purchase order status

Hello friends,
There's a tab STATUS in purchase order (tcoe ME21N).
I can't find a table which contains theses statuses.
Anybody knows what's the table for purchase orders status ??
Regards,
Bahia

Hi
PO status is stored in Structure not in the table.
Please use the List displays to get the information like ME2N,ME2L, ME2M, ME2K etc
You can also get the information from the table EKKO, EKPO, EKET,EKBE
Hope it helps
thanks/karthik

Business scenarios for daily, weekly and nightly loads!!

Can any body tell some Business scenarios for daily, weekly and nightly loads where we monitor the loads in Production support.
Regards
srikanth.ch

Hi,
It all depends on your business needs. In general on daily basis you will load the SD and MM which will cover all the stock and sales done for day. Generally most of the clients use Lo Cockpit extraction for both the modules. FI chains will run on month end for example the AP(Accounts Payable),AR(Accounts Receivable) chains will be run on the month end.
Some SD datasources : 2lis_13_vdhdr, 2lis_13_vditm, 2lis_13_vdkon - all these to pull billing related data
Some MM Datasource : 2lis_03_bx and 2lis_03_bf.
Regards,
Harish Raju

Searching for a Project status = CLSD and open purchase orders?

Hi,
I am searching for a project status (Project Builder CJ20N) which allowed my to set a CLSD or a simillar status for settlement with open purchase orders.
This staus should allowed to process with open orders BUT not allowed to add new orders after setting this status.
Have somebody any idee? Or it is impossible?
Tahnk you in advanced for your Help.
Regards Baldy

Hi TV-kid,
while I was waiting for an answer I got to the same conclusion, so what you offers me is quite tempting actually.
I got a look to your website and it seems convincing. Still though, your case studies are in other business area, It's only a mater of good knowledge of File Maker.
I did download the test-drive last version of File Maker plus their samll Business Solution. I did read most of the documentation and the learning process would be too long to construct ourself a good crossed-data base.
I'd like to get in contact with you to look for a possible colaboration. to get private, I'd liketo do it through your contact link in your website .
To whom shall I write?
Thanks
Cheers
Cheers

Typical business case scenarios for SharePoint 2013 Apps

What are the typical real time business case scenario for 1. SharePoint Hosted apps 2. Auto Hosted apps 3. provider hosted Apps? Why people choose any of this model apps model in comparison to typical On-Premise solution?
Another question comes is when should one go for On-Premise solution rather than Apps? What are real time scenarios?

Let's discuss first whether to develop apps or full trust solution.
Talking about technical aspect, On-Premise solution is popular choice for organizations who have SharePoint hosted on premise (not SharePoint Online). However, if you are using SharePoint Online, there's no choice except Apps (and possibly sandbox but deprecated).
So for SharePoint Online only viable solution is developing apps. However for on-premise you can develop full trust or apps. However since apps requires a bit more configuration and not yet full feature set as you can do with full trust, most people are still
developing full trust solution on premise.
Talking about business requirement at hand, you can develop apps (even in on-premise), if your requirement is really looks like an app. For example, you would like to develop a SharePoint solution, that will show data from SAP inside SharePoint. The solution
mostly nothing to do with SharePoint but calling SAP services to perform stuffs. So you can develop an apps and deploy inside SharePoint. Another example is import CSV files in SharePoint list, you can write an apps. But mostly I think you need to decide whether
to develop apps depends on the Apps API ability. The API is still very limited in features/functionalities. So even if your requirement looks like apps you can't develop apps if the current SharePoint Apps API doesn't support the functionality.
Now let's talk about which apps model you would like to use SharePoint Hosted apps means everything hosted inside SharePoint and no other external infrastructure is required. One example is the CSV file upload apps. However, with SharePoint hosted apps,
you can't use C# rather you just have javascript to develop the apps. There's rumours that auto hosted apps will be deprecated not sure but there's not more conceptual difference apart from where the apps is hosted (both hosted outside SharePoint). Provider/auto-hosted
apps will be running outside SharePoint (i.e., in IIS web site), and communicate to SharePoint through REST or client object model. One provider hosted apps in the office app market is adlib pdf conversion. The apps allows you to select multiple files and
covert them to pdf file. Basically the conversion site is hosted somewhere outside (in the provider's infrastructure). When you select all the files and click 'convert' from ribbon user is redirected to the provider site (different url) and the files are merged
and converted to pdf. Since it's outside of sharepoint, you can use any development language (C#, java, php etc.). The provider hosted app talks to sharepoint through REST or client object model.
So in summary, sharepoint hosted app has less complexity as it doesn't require another infrastructure and runs inside sharepoint. However you are limited to use only javascript to develop your apps. On the other hand with provider hosted apps, you can use
any development language but you need to consider extra level of security/complexity to integrate the app with sharepoint.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com
Thanks for this nice reply. Plz clarify if only Auto hosted apps will be deprecated or provider hosted apps also may be deprecated by MS?

Need FM for reading user status at run time in CRMD_ORDER txn.

hello all,
i need to know the FM for finding the user status on the screen.
i know there are FM's for finding the values on subject and external reference fields. similarly i want it for user status .please help me in this regard....
Thanks,
Sreekanth.

Hey Shiva,
The FM for finding user status is CRM_STATUS_READ_OW
Please Reward for usefull usefull post..
Regards,
Anand..

Complicated Free goods scenario for Beverage

Hi
These are scenario for F&B business - mostly they have complicated promotion on free gifts which I think SAP standard cannot cover it. If any of you has the similar cases, please share how you handle it, thanks.
1. Buy soda water size 10 oz regardless of soda taste for 1 pack (1 pack consist of 24 bottles) then get 1 bottle free.
2. Buy soda water size 10 oz regardless of soda taste for 1 pack, then get 1 bottle free - maximum at 2 sets.
3. Buy soda water either size 10 oz or 15 oz for 1 pack, get 1 bottle of 10 oz free
4. Buy soda water regardless of soda taste as set i.e. for every 36 packs of combine size 10 oz, 15 oz and 1 lt - get free items of 10 oz/15 oz for 2 bottles per pack and free item of 1lt for 1 bottle per pack
5. Similar to 4 with additional condition that 1 soda taste must be more than 50% - for example, it must be coke at least 50%
6. Sales quota - Buy 1 pack, get 1 bottle free - maximum 100 bottles for each customer
Please kindly share your experience or ideas. Thank you
Chanchana

HI Chanchana,
I had a similar problem while configuring Free goods in Ceramic Industry(Sanitaryware division).
For Eg: In the case of wash-basins, basins of different colors are defined as different materials, an the requirement was to
2 Black & 2 red = 1 tap free
or
1 red, 1 white & 1 black = 2 taps free.
We did a lot of R&D considering std SAP free goods scenario, out of which I can conclude the following:
1) Std SAP allows only 1 + 1(Same material, inclusive) or 1 + 1(different material, exclusive) to be configured as free goods.
In your case if the main material and the free goods are defined as two different materials and there is no 3rd material coming into picture only then free goods config will work.
For Eg: For 10qty Material A, 1 qty of material A free - possible
For 10qty of material A, 1qty of material B free - possible
For 10qty of Material A, 5 qty of Material B, 1qty of Material C free- not possible in std SAP.
You can convince this to your client, but if they still insist on having the same, you will have to develop a custom 'Z' application which will control the same. However, the same might turn out to be very complex, since pricing, COGS of the free material has to be taken care of along with a lot of other factors. Also the delivery and billing has to go through std SAP, mapping of which will be complex again.
All the best.
Regards,
Amit
Edited by: Amit Iyer on Sep 20, 2010 10:17 AM

What are the possible values for the JOB status?

What are the possible values for the JOB status in the table TBTCP and significance for each?

Hi,
Have a look at include LBTCHDEF.
The standard include from SAP.
-> Definitions and Constants for Function group BTCH
Kind Regards
Raymond

Logic to retrieve batch number in batch split scenario for a material

Hi All!
LIPS-CHARG gives the batch number for a material in normal scenario.But in batch split scenario for a material what should be the logic to retrieve the field batch number based on POSNR,VBELN and UECHA in LIPS.
UECHA corresponds to higher level item of a batch.
I had been given the following logic to do the same but it is not pulling any values inspite of a batch split available for the material.The logic is
Select lips-charg (batch number) where lips-posnr = lips-uecha ( higher level item batch)
Please advise
Regards
Praneeth

Hi Praneeth,
The way LIPS records are in a batch split scenario is that let us say you have a delivery with one line item 00010. Now if this splits into two batch split items, then you will find in LIPS 3 records, one with line item 00010, one with 90001 and another with 90002. Both 90001 and 90002 will have a UECHA of 00010, whereas for 00010, this field will be blank. So the logic is to create two internal tables one where UECHA is blank and another where it is not blank and use it.
SELECT * FROM LIPS
         INTO TABLE I_LIPS
        WHERE VBELN = P_VBLEN.
I_LIPS_TEMP[] = I_LIPS[].
DELETE I_LIPS_TEMP WHERE UECHA IS INITIAL.
*-- This table will not have only the batch split items not the main items.
LOOP AT I_LIPS WHERE UECHA IS INITIAL.
*-- loop at the main items.
IF I_LIPS-CHARG IS INITIAL.
*-- batch is not there on the main item, see if it is there on any batch split items.
    READ TABLE I_LIPS_TEMP WITH KEY UECHA = I_LIPS-POSNR.
     do whatever
ENDIF.
..... do whatever
ENDLOOP.

XML failure with ASN no Process DELIVERY_INFO_GR for ASN in status is not allowed

Hi All,
In production , we are having many XML failures while sending inbound delivery to SNC from ECC.
In SXMB_Moni, ASN XXXX: Process DELIVERY_INFO_GR for ASN in status is not allowed. Becasue ASN is not exist in SNC but in ECC GR status is complete.
Please help to resolve the same.
Regards,
Sheetal

Hi,
Please go the tcode CO02 and click on functions and select the restrict processingand click on unlock
the reason may be tht some might have locked the produvtion order ,
hopw it wud have answered ur question.
rewards if it is useful
Shawn

Advice a scenario for retrive a status of mapping.

Similar Messages

Maybe you are looking for