Advice me regarding the certification path for 10g database certification.

Hello friends,
I am planning to take the certification for Oracle 10g database Associate, and am confused about the codes of the tests I need to take.
I have following queries:-
1) Is it enough to take 1Z0-042, to take Oracle Certified Associate, certification?
2) Is it necessary to take 1Z0-047 as a support for this certification?
3) Would I be considered for job openings if I get certified? (I mean the frequency of jobs). I know it is hard to answer this question, however I want an idea of applying for certified related jobs that accept OCA.
Please advice me in this regard.
Thanks in advance
Murli

Please post any other certification-related questions in the forum: Oracle Certification Program
To become OCA you need to do the 1z0-042 exam and one of the following exams: 1z0-007, 1z0-051, 1z0-047.
Becoming certified will put you in front of many people, but what employers are mostly looking for is experience. Many companies require a certification for the person to be even eligible for the interview, others use it as a differential.

Similar Messages

Where is the Workflow Installation for 10g Database ?

Hi ,
Where is the Workflow Installation for 10g Database?
Thanks!

http://otn.oracle.com/software/products/workflow/index.html
Pick your platform.

Certification path for 10g

I had a doubt of which certification path to take for certification for 10g. From the Oracle site
(http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=140), it shows in the category of 'Middleware' but I feel 10g AS should be in the category of 'Applications'.
So,
a) Oracle Application Server 10g Administrator: Certified Associate
b) Oracle Application Server 10g Administrator: Certified Professional
shown in the category of 'Middleware' should be the one to be taken by me?
I hope, my question is clear.
Please, help in solving the doubt.
regards

user574290 wrote:
I had a doubt of which certification path to take for certification for 10g. From the Oracle site
(http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=140), it shows in the category of 'Middleware' but I feel 10g AS should be in the category of 'Applications'.
So,
a) Oracle Application Server 10g Administrator: Certified AssociateThis has to be achieved first.
b) Oracle Application Server 10g Administrator: Certified Professional
This certificate can only be achieved after the OCA has been achieved
... and unless you are already a database administrator OCP you will need to have done a recognised course.
shown in the category of 'Middleware' should be the one to be taken by me?
I hope, my question is clear.
The quuestion is clear, and the answer is you must do the 1z0-311 exam first.
Please, help in solving the doubt.
regardsPlease refer to: [http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=158]

Regarding the key mapping for 10g forms as in 6i forms

Hi All,
I want the kep mappings of oracle forms 6i to be implemented in oracle forms 10g. I have made the changes in the fmrweb.res file as shown below. Can any one just check it once and let me know whether the mapping is correct?.
116 : 1 : "Shift+F5" : 69 : "Clear Block"
85 : 2 : "Ctrl+U" : 3 : "Clear Field"
118 : 1 : "Shift+F7" : 74 : "Clear Form"
115 : 1 : "Shift+F4" : 62 : "Clear Record"
117 : 1 : "Shift+F6" : 63 : "Delete Record"
112 : 1 : "Shift+F1" : 78 : "Display Error" XX
76 : 2 : "Ctrl+L" : 7 : "Down"
40 : 0 : "Down" : 7 : "Down"
114 : 0 : "F3" : 73 : "Duplicate Field"
115 : 0 : "F4" : 64 : "Duplicate Record"
69 : 2 : "Ctrl+E" : 22 : "Edit"
118 : 0 : "F7" : 76 : "Enter Query"
119 : 0 : "F8" : 77 : "Execute Query"
112 : 0 : "F1" : 30 : "Help"
120 : 3 : "F9" : 29 : "List of Values"
117 : 0 : "F6" : 62 : "Clear Record"
34 : 2 : "Ctrl+PageDown" : 71 : "Next Block"
9 : 2 : "ctrl+Tab" : 1 : "Next Field"
114 : 1 : "Shift+F3" : 61 : "Next Primary Key"
1005 : 1 : "Shift+Down" : 67 : "Next Record"
119 : 2 : "Ctrl+>" : 66 : "Next Set of Records"
33 : 2 : "Ctrl+PageUp" : 72 : "Previous Block"
9 : 3 : "Shift+Crtl+Tab" : 2 : "Previous Field"
38 : 1 : "Shift+Up" : 68 : "Previous Record"
119 : 1 : "Shift+F8" : 79 : "Print"
112 : 2 : "Ctrl+F1" : 35 : "Show Keys"
80 : 2 : "Ctrl+P" : 6 : "Up"
I am not able to find the mapping keys for the following keys of 6i in 10g. Can these keys be mapped?.
Accept
Cancel
Count Matching Records
Debug Mode
Delete Backward
Left
New Record
Next Set Of Records
Previous Menu
Return
Right
Regards,
Prasad.

I think this one will have both keys in 10g from forms 6i/10g...and the rest you asked.
9    : 0 : "Tab"            : 1 : "Next Field"
9    : 2 : "Ctrl+Tab"         : 1 : "Next Field"
9    : 1 : "Shift+Tab"      : 2 : "Previous Field"
9    : 3 : "Shift+Ctrl+Tab" : 2 : "Previous Field"
85   : 2 : "Ctrl+U"         : 3 : "Clear Field"
38   : 0 : "Up"             : 6 : "Up"
40   : 0 : "Down"           : 7 : "Down"
33   : 0 : "PageUp"         : 12 : "Scroll Up"
34   : 0 : "PageDown"       : 13 : "Scroll Down"
69   : 2 : "Ctrl+E"         : 22 : "Edit"
10   : 0 : "Enter"         : 27 : "Return"
120 : 0 : "F9"              : 29 : "List of Values"
76   : 2 : "Ctrl+L"         : 29 : "List of Values"
81   : 2 : "Ctrl+Q"         : 32 : "Exit"
75   : 2 : "Ctrl+K"         : 35 : "Show Keys"
112 : 2 : "Ctrl+F1"         : 35 : "Show Keys"
83   : 2 : "Ctrl+S"         : 36 : "Commit"
121 : 2 : "F10"         : 36 : "Commit"
114 : 1 : "Shift+F3"       : 61 : "Next Primary Key"
115 : 1 : "Shift+F4"       : 62 : "Clear Record"
117 : 1 : "Shift+F6"       : 63 : "Delete Record"
115 : 0 : "F4"             : 64 : "Duplicate Record"
117 : 0 : "F6"             : 65 : "Insert Record"
119 : 1 : "Shift+F8"       : 66 : "Next Set of Records"
1005 : 0 : "Down"           : 67 : "Next Record"
1004 : 0 : "Up"             : 68 : "Previous Record"
40   : 1 : "Shift+Down"     : 67 : "Next Record"
38   : 1 : "Shift+Up"       : 68 : "Previous Record"
116 : 1 : "Shift+F5"       : 69 : "Clear Block"
116 : 0 : "F5"              : 70 : "Block Menu"
34   : 1 : "Shift+PageDown" : 71 : "Next Block"
33   : 1 : "Shift+PageUp"   : 72 : "Previous Block"
34   : 2 : "Ctrl+PageDown" : 71 : "Next Block"
33   : 2 : "Ctrl+PageUp"    : 72 : "Previous Block"
114 : 0 : "F3"             : 73 : "Duplicate Field"
118 : 1 : "Shift+F7"       : 74 : "Clear Form"
118 : 0 : "F7"             : 76 : "Enter Query"
119 : 0 : "F8"             : 77 : "Execute Query"
122 : 0 : "F11"            : 76 : "Enter Query"
122 : 2 : "Ctrl+F11"       : 77 : "Execute Query"
112 : 1 : "Shift+F1"         : 78 : "Display Error"
80   : 2 : "Ctrl+P"         : 79 : "Print"
113 : 1 : "Shift+F2"         : 80 : "Count Query"
123 : 0 : "F12"            : 81 : "Update Record"
121 : 3 : "Shift+Ctrl+F10" : 82 : "Function 0"
112 : 3 : "Shift+Ctrl+F1" : 83 : "Function 1"
113 : 3 : "Shift+Ctrl+F2" : 84 : "Function 2"
114 : 3 : "Shift+Ctrl+F3" : 85 : "Function 3"
115 : 3 : "Shift+Ctrl+F4" : 86 : "Function 4"
116 : 3 : "Shift+Ctrl+F5" : 87 : "Function 5"
117 : 3 : "Shift+Ctrl+F6" : 88 : "Function 6"
118 : 3 : "Shift+Ctrl+F7" : 89 : "Function 7"
119 : 3 : "Shift+Ctrl+F8" : 90 : "Function 8"
120 : 3 : "Shift+Ctrl+F9" : 91 : "Function 9"
113 : 0 : "F2"             : 95 : "List Tab Pages"
72   : 2 : "Ctrl+H"         : 30 : "Help"
112 : 0 : "F1"              : 30 : "Help"

Could not read the profile path for user S-1-5-21-1272265863-3531003469-187

hi
I was doing the installation of the crm702 on MAXDB+WINDOWS.IN THE FIRST PHASE OF EXECUTION(CREATE USERS FOR SAP SYSTEM) I GOT THE ERROR MENTIONED BELOW.CAN SOMEONE HELPE ME :
An error occurred while processing option Enhancement Package 2 for SAP CRM 7.0 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step: Could not read the profile path for user S-1-5-21-1272265863-3531003469-18741865-1021 from the registry: The system cannot find the file specified. .). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:/crmfeb.

Hi,
Delete all keys in registry (regedit) with: S-1-5-21-1272265863-3531003469-18741865-1021. You can do it by find it - F3.
After that restart sapinst.
Regards.

Pls give the menu path for pricing schema for PO

Pls give the menu path for pricing schema for PO
Thanx
Vikas Chhabra

Hi,
we assign account assignment category in PO.Here is the path
IMG>Materials Management>Purchasing>Account Assignment>Maintain Account Assignment Categories OME9
Based on account assignment category you use in PO, it will ask you cost object in PO
E.g P (project) you need to enter G/L and WBS element
N Network G/L and Network
Like in SD account determination, OMWB is MM and FI integration.
Regards,
Chandra

The specified file or folder name is too long,the url path for all files and folders

The specified file or folder name is too long,the url path for all files and folders must be 260 character or less
can we increase this limit?
MCTS,ITIL

Hi,
As I understand, you want to increase the length of URL path in SharePoint 2010.
Per my knowledge, this limit cannot be increased. SharePoint limits URL length because all relative URL links are stored in the clear forms on the SharePoint content DB and often this links are used as primary keys to link one table with another. Fields
which are used to store these links (for instance tp_DirName from the AllUserData table) allow storing only 256 characters.
There are several ways that you can resolve or mitigate URL length problems in the SharePoint Server 2010 environment. The following list provides suggestions:
1. Upgrade all the end-user browsers to Internet Explorer 8, which has a longer URL length limit.
2. Use shorter names for sites, folders, and documents and control the depth of the site and folder structures to reduce the lengths of URLs.
3. If possible or allowed, use ASCII names for sites, folders, and documents. This will avoid situations where the URL will be lengthened by being encoded.
4. To reduce the risk that the SharePoint Server 2010 end-users will encounter problems because of URL length limitations, we recommend that you apply the following effective limits in the deployment:
256 Unicode (UTF-16) Code units - the effective file path length limitation, including a domain/server name
128 Unicode (UTF-16) Code units - the path component length limitation
More reference:
http://technet.microsoft.com/en-us/library/ff919564(v=office.14).aspx
http://sharepointknowledgebase.blogspot.in/2013/04/url-path-length-restrictions-in.html#.VKJN53BJA
Best regards,
Sara Fan

Help needed regarding the deployment architecture for PROD env

Dear All,
Please help me with some clarifications regarding the deployment architecture for PROD env.
As of now I have 2 single node 12.1.1 installations for DEV and CRP/TEST respectively.
Shortly I will be having a PROD env of 12.1.1 with one DB node and 2 middle tier (apps) node. I need help in whether -
1) to have a shared APPL_TOP in the SAN for the 2 apps node or to have seperate APPL_TOPs for the 2 apps node. The point is that which will be benificitial in my case from business point of view. The INST_TOPS will be node specific in any case right?
2) Where to enable the Concurrent Managers, in the DB node or in the primary apps node or in 2 apps node both for better performance.
12.1.1 is installed in RHEL 5.3
Thanks and Regards

Hi,
Please refer to (Note: 384248.1 - Sharing The Application Tier File System in Oracle E-Business Suite Release 12).
For enabling the CM, it depends on what resources you have on each server. I would recommend you install it on the the application tier node, and leave the database installed on one server with no application services (if possible).
Regards,
Hussein

Sun ONE Studio 4 aka Forte: How to set the output path for classes ?

Help !
Beginner's question:
Sun ONE Studio 4 aka Forte:
How to set the output path for classes ?
As default, the class files are created in the same directory as the
sources.
In opposite, both JBuilder and Together support that there is a tree
with the sources and another tree with the classes.
The first answer I got was "not possible with Forte, but just if you write your own "ANT Build script" !
a) Please point me to a ready-to-use ANT script for this purpose, if such is available
b) Is using ANT instead of the MAKE as comfortable ? Besides the separation of sourcecode and classes, I would like to keep everything else to be the same, i.e. I don�t want to edit the ANT file if I enlarge the project by directories or files.
Tia
Sincerely
Rolf

You can set S1S's options to place newly created .class files in a specific location.
Identify the compiler that is being used - Open the S1S's Tools/Options window, expand Editing and select Java Sources. Note the Default Compiler value. (If it's one if the Ant options, you use Ant to specify this option, not S1S.)
Open the S1S's Tools/Options window, expand Building/Compiler Types and select the appropriate compiler.
The Properties tab of the compiler has the property Target, which sets the filesystem where the compiler output is directed. If you choose <not set>, the .class files are written to their source directory.
When you set the Target, your change affects all classes that use this compiler.
Very few options can't be set in S1S; the challenge is finding out where they're set!

Query regarding the data type for fetcing records from multiple ODS tables

hey guys;
i have a query regarding the data type for fetcing records from multiple ODS tables.
if i have 2 table with a same column name then in the datatype under parent row node i cant add 2 nodes with the same name.
can any one help with some suggestion.

Hi Mudit,
One option would be to go as mentioned by Padamja , prefxing the table name to the column name or another would be to use the AS keyoword in your SQL statement.
AS is used to rename the column name when data is being selected from your DB.
So, the query Select ename as empname from emptable will return the data with column name as empname.
Regards,
Bhavesh

What is Microsoft's official policy regarding the processing time for HCK2.1 Driver Submissions?

What is Microsoft's official policy regarding the processing time for HCK2.1 Driver Submissions?
Can someone point me to a document that states the official policy stating their maximum review time? This info used to be in the WLK1.6 FAQ but I don't see it for the HCK2.1 suite.
Thanks!
Al

Ian,
Thanks for your reply. Yes, I'm sure LabVIEW uses the (default) Windows timer. And yes, 1 mS is not guaranteed due to the preemptive nature of Windows (and even "RTOSs" to varying degrees), which is why I see about plus or minus 2 mS.
Apparently the Windows timer can be set by API calls. See: http://www.lucashale.com/timer-resolution/. Here's a screen shot of his TimerResolution.exe on a Windows 7 PC:
Here it is on my Windows XP PC after I set it to "Maximum" (initially it was 15.625 mS):
Notice that it sets the Maximum to less than 1 mS, which is supposed to be the max, so there are some bugs. Plus the Default button does not reset it in XP, but does work on Windows 7 or 8. (I know this is not the place to "debug" non-LabVIEW applications!)
I'll bet LabVIEW sets it, too. The only caveat, as I said, is it looks like another application can change it, since the hardware timer is a "global" timer. I have not seen this issue in my LabVIEW applications, have you?
I guess I need to do some more digging to see the code to set the timer, but it looks like the developers of LabVIEW have it figured it out.
(FYI, I did notice that running my LabVIEW app (which gives about 2 mS resolution) or a C# app, which gives 15.625 mS resolution, does not affect what TimerResolution.exe reports, so I'm not sure if it's really working correctly. If I figure it out I'll post the results.)
Ed

How to install the Workflow Manager for 10g ?

how to install the Workflow Manager for 10g ?
where can I find the information ?

Ting,
When you install the workflow server from the 10gdb DB, it will install the workflow manager as well. Please make sure you read the Metalink note 265554.1 for known issues and tips. Make sure you give the correct information in the WFCA as mentioned in the metalink note.
Cheers,
Raja

I need the upgrade path for Indesign CS3 to operate on Mac OS X Version 10.6.8?

I need the upgrade path for Indesign CS3 to operate on Mac OS X Version 10.6.8?

The latest, and only available choice is CS6. You have two choices, subscribe to Creative Cloud or buy a new license.
There are no upgrades with the exception of a discount for the first year of the full Creative Cloud.

ERR: This request does not match the context path for any installed web app

We are currently using weblogic 6.1 SP6 and facing "Error 404 Page not found" error very oftenly.
          This error is first encounter while uploading file at File folder, although does not happen at every upload, but was quite consistent always at upload file stage. At this moment, this error can occur at any stage, when ever we run any heavy process on the server (like importing large amount of data or pushing the data to different ERP - system by using custom integration. The system works fine after restarting.
          Please help me out to resolve this issue as this very critcal for our production environment.
          ERROR:
          ####<May 12, 2005 4:17:12 PM SGT> <Error> <HTTP> <MatrixTransit> <myserver> <ExecuteThread: '13' for queue: 'default'> <> <> <101147> <HttpServer(7105637,null default ctx,myserver) found no context for "/ematrix/emxLogin.jsp". This request does not match the context path for any installed web applications and there is no default web application configured.>
          ####<May 12, 2005 4:17:15 PM SGT> <Error> <HTTP> <MatrixTransit> <myserver> <ExecuteThread: '13' for queue: 'default'> <> <> <101147> <HttpServer(7105637,null default ctx,myserver) found no context for "/ematrix/emxLogin.jsp". This request does not match the context path for any installed web applications and there is no default web application configured.>
          ####<May 12, 2005 4:17:16 PM SGT> <Error> <HTTP> <MatrixTransit> <myserver> <ExecuteThread: '13' for queue: 'default'> <> <> <101147> <HttpServer(7105637,null default ctx,myserver) found no context for "/ematrix/emxLogin.jsp". This request does not match the context path for any installed web applications and there is no default web application configured.>
          ####<May 12, 2005 4:17:17 PM SGT> <Error> <HTTP> <MatrixTransit> <myserver> <ExecuteThread: '13' for queue: 'default'> <> <> <101147> <HttpServer(7105637,null default ctx,myserver) found no context for "/ematrix/emxLogin.jsp". This request does not match the context path for any installed web applications and there is no default web application configured.>
          ####<May 12, 2005 4:17:18 PM SGT> <Error> <HTTP> <MatrixTransit> <myserver> <ExecuteThread: '13' for queue: 'default'> <> <> <101147> <HttpServer(7105637,null default ctx,myserver) found no context for "/ematrix/emxLogin.jsp". This request does not match the context path for any installed web applications and there is no default web application configured.>
          THANKS
          Rohit

Rohit
          How did you resolve the issue?
          I am facing the same.
          Thanks
          Amit

FM to select the file path for download into application server

Hello,
I need a FM to select the file path for download into application server. It is a F4 help .
Its functionality should be simmilar to the one used for presentation server i.e. as fol
CALL METHOD cl_gui_frontend_services=>file_save_dialog

Hello,
What about F4_DXFILENAME_TOPRECURSION? You can check other FMs of the group DX_FILE.
BR,
Suhas
PS: I think these FMs are not released by SAP, so need to be cautious while using these

Advice me regarding the certification path for 10g database certification.

Similar Messages

Maybe you are looking for