Advice needed in BSO DB loading

Dear all,
we have about ten BSO bases every day loaded. And one very big DB, tens millions rows in data file which loaded every week and every 2nd day of the month. And when this big DB is being loaded some other little DBs have some difficulties in loading and calculating (processing time increase dramatically). What can i do to improve situation with little DBs loading - they are not less important than big one.
Thank you.
Natalia

Hi Bocharova,
Even we had faced a similar issue. When you are loading the big DB, your resources are being utlized more and at the same time , if you process other cubes ( i.e smaller ones) , it effects the performance .Performance depends on the resources avaialbe on your system/server .
So, request you to test by parallely running lesser cubes at a time ,when your big cubes is running ,and test in all possible permutations and combinations to conclude , how many cubes to be processed at a time ,and which cubes to be run in which order .
Again to improve performance of little DB's , you need to test in the cases , if it run it parallely with big DB ,and next in isolated manner . Campare ,and then take a call on it .
Sandeep Reddy Enti
HCC

Similar Messages

Advice needed on speeding up load times.

I need some practical advice on ways in which I can speed up the load time on one particular page of my website. This page: http://www.thinksmartresumes.com.au/%2499-designs.html
I know there are hundreds of localised factors including Internet connection but lots of people have now commented that this page take over 30 seconds to load. I know it's a big page with lots of png's and links. What can I do to speed things up???
Any advice welcome apart from splitting the page up (that's not an option). I can't read code btw.
Cheers all.

Hi
I tried to check the page which loads slow and can see the reason, while opening the page , browser downloads 10.1 mb of data for that single page out of which 9.7 mb is only for images which you have used on page.
The images as I have checked are png format and defines for states.
The only option you can use is optimize the images you have used, for example if you have used images with opacity or states effect, try to create the image outside of Muse with any editor like Photoshop and then use that image which should lower down the size in comparison to defined states.
Resize the images , use web fonts etc , these things you can check which would help in loading the page faster.
Thanks,
Sanjit

I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!

I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!

Hi
That screen grab helps a lot. There’s a much easier way of doing what you’re doing.
Remove all your tabs and set the text in justified paragraphs.
I’ve typed in dummy text in the example I made below, but after “19.1” put in a space and put your blinking cursor after the space and before the ’N’ of ‘Notices'.
Then hold down the Command key and hit Backspace (on Mac at least - it’s the key between the Inverted commas/ apostrophe key and the return key).
The text will jump into place the way you want it to.
Hope that helps
Paul
PS You can set a tab, instead of using a space, in the description I gave above. So, after 19.1 or 19.2 or 19.185 etc etc insert a tab, then hit the Command Backspace after every paragraph number and they'll all line up exactly together. You'll find that editing text within the paragraphs
after you've set it will be LOADS easier this way.
You can put the tab anywhere you want it to be using 'Command-ShiftT' and putting a 'left align' tab just after the number. Just type the Command Backspace after the paragraph number and it'll work

Using Audition 2.0 on Windows XP platform. Now have Windows 8.1 on new computer and need to upgrade and load latest version of Audition. Any suggestions? Thanks very much.....R

Using Audition 2.0 on Windows XP platform. Now have Windows 8.1 on new computer and need to upgrade and load latest version of Audition. Any suggestions? Many thanks, R.

VC6. is rather old, but you can try to convert the VC6 project using the upgrade wizard of VC2012. Depending on the content of the project your code will work more or less without problems, at least it will compile without errors.
You could also go the 2nd way and create in VC2012 a project type using the wizard that is very similar to your current VC6 projcet (MDI, SDI, Dialog Based, ...). Than you replace the files generated by the wizard with the content of your project. Sometimes
this way is more successful.
But at all the automated converting success depends on the code of your VC6 project. I had both, conversions without big problems and also conversions that need a lot changes to run on a current VC version.
Best regards
Bordon
Note: Posted code pieces may not have a good programming style and may not perfect. It is also possible that they do not work in all situations. Code pieces are only indended to explain something particualar.

Need help with ACE Load Balancing Base on URL pattern

This is the first time for me trying to configure something like this on the ACE load balancer. I need help configuring a load balancing policy base on URL pattern. URL https://ineedhelp.com base on /willuhelpme and /imlost
Key: ineedhelp_key
cert: ineedhelp_cert
serverfarmA
serverA 10.1.1.1 443
serverfarmB
serverB 10.1.1.2 443
ineedhelp.com/willuhelpme-------serverfarmA
ineedhelp.ocm/imlost---------------serverfarmB

This is the first time for me trying to configure something like this on the ACE load balancer. I need help configuring a load balancing policy base on URL pattern. URL https://ineedhelp.com base on /willuhelpme and /imlost
Key: ineedhelp_key
cert: ineedhelp_cert
serverfarmA
serverA 10.1.1.1 443
serverfarmB
serverB 10.1.1.2 443
ineedhelp.com/willuhelpme-------serverfarmA
ineedhelp.ocm/imlost---------------serverfarmB

Advice needed on buying iphone as gift

I went to apple store, they do not want to sell iphone to me unless I sign AT&T 2 years plan. I thought AT&T has locked the phone and users must subscribe in order to use it. Why Apple store still not allow me to buy?
Please advice, if I want to buy online iphone for my brother, do I or my brother have obligation to sign out AT&T plan?
One more advice needed, I found the shipment takes weeks, do I have option to arrange for self-collection?
My brother birthday is coming soon, I need above advice urgently.
Thank you very much

Tamara wrote:
I'm guessing English is not your first language. It's possible that you misunderstood them. Apple Store employees won't refuse to sell you an iPhone and you don't have to sign up for service in the store.
Well that's not entirely true.
Apple Stores have been instructed not to sell you an iPhone if any of the following is true:
You state that you will not be signing up with AT&T.
You do not have an ID from a US state, also indicating you will not be activating with AT&T
You do not have a credit card
For example, I've seen US Apple Store managers refuse to sell iPhones to European residents because of the AT&T lock-in.

Video intensive work on Mac Pro? Advice Needed

Hi everyone,
I've been originally saving up for a while now for an iMac 24" as it offers the best specification price wise. But now I leaning on the Mac Pro and therefore need some advice.
I know that there are alot of posts on advice - need to buy mac etc. so therfore I would really appreciate if I am afforded some help.
I am mostly going to do ALOT of video encoding (via handbrake) and I am looking for the best configuration available to achieve lowest waiting time.

I think you should go back and look at the other threads with advice, your budget. There is "ideal" and "affordable."
Will it pay for itself in 24 months so you can afford the next revision at that time?
Start with an 8-Core 3GHz.
Add a Port Multiplier controller and two drive cases, 5 drives each, nearly 400MB/sec RAID.
Throw in 8GB RAM.
Add in costs for software upgrades, two sets of backups, four internal 500GB drives.
Seagate has 750GB, as does WD. Hitachi has their $450 1000GB monster.
Give yourself time to build, test, and optimize your setup, and expect to change it over time as you learn more.
Can't afford that? then trim the 8-core. But Apple has shown how efficient next generation applications already are for video when it comes to 3GHz 8-core Mac Pro.

I need OS 5.0 loaded to sync and t......... From 3G iPhone to MacBook pro laptop. How do I load 5.0?

I need OS 5.0 loaded on MacBook pro to be able to. Sync and tether 3G iPhone and laptop. How do I load 5.0?

If you mean Mac OS X 10.5 or newer for the MacBook Pro, you purchase and install it.
If you mean iOS 5, you can't; it isn't compatible with the iPhone 3G.
(61090)

Had to have a rebuild of my laptop....advice needed!

Had to have a rebuild of my laptop....have now lost all my music from my itunes, but I can't transfer back on from my ipod. Also had to register my laptop (same) as another computers, so now no music showing as purchased, though I have. Also have hours of uploaded music from my own purchased, legitimate CDs, but won't transfer from ipod...it says it will erase. So very frustrated....thanks mr technician! PLEASE ....help, advice needed!

I believe that if you do a clean reinstall from your HD's recovery sector (D) or Recovery disks, the hard drive sector C is wiped clean. Everything goes, apps, data, address books, music, pix, viruses
Is that what you did?

Delta load is done,now need to have full load

Hi,
Delta load is done,now need to have full load.
Here for DTP we dont have full repair,what is the process.

Hi,
You will have to use repair full load at infopackage level.
But repair full load should be done only if their is any problem
in the load.
Process
1)selectively delete the data where problem had occured
2)Repiar full load in the infopackage for that selection.
You cant do a direct full load on the same selection as that of delta.
Please assign points if it helped you
Regards,
Senoy

IPad: Any advice on getting a pre-loaded Sim for use overseas (Europe)?

iPad: Any advice on getting a pre-loaded Sim for use overseas (Europe)?

Thanks, I thought this was the case, checking to see if anything had changed. Spain is the country in question. We previously were not able to obtain a Sim there but that may have been because of a carrier or individual employee problem. Will certainly try again next time (we did get a carrier Sim successfully in Italy one time). Cheers

MOVED: Various advice needed to overclock cpu using my MSI k8n platinum sli

This topic has been moved to Overclockers & Modding Corner.
Various advice needed to overclock cpu using my MSI k8n platinum sli

what HSF for cpu/ cooling for the case do you use? And also, where are the flashing lights?

Advice needed on Bulk Load activity

Hi,
I'm posting this problem in this forum in order to get a best possible suggestion for the below scenario.
Any thoughts will be much appreciated. Thanks in advance for your time.
I have a table with 150 million rows with 4 columns in it,
Table A
userId
productId
eventId
createDate
Now I have to load 50 million new rows to be Merged/Loaded.
Of this new rows mostly(80%) of them are existing users.
I need to update the existing users(40 M) and Insert the new users(10 M).
Can any one suggest how to approach this issue for a solution.

It is going to be a routine activity. I did not receive the information about frequency of refresh, lets assume it is going to be once a week.
This cannot be done offline, there are multiple services that access this data and their SLA are strict.
But I like the idea of CTAS.
But what I need is a merge on the tableA using the new 50 million data.
So how about these options?
SOLUTION A:*
step 1) upload the new 50 million data into a stage tableS
step 2) Creating a new empty tableB using CTAS
step 3) INSERT /*+ append parallel (tableB,12) */ INTO tableB
SELECT /*+ parallel (x 12) parallel(y 12)*/*
nvl(y.userId, x.userId),
nvl(y.productId, x.productId),
nvl(y.eventId, x.eventId),
nvl(y.createDate, x.createDate)
FROM TABLEA x FULL OUTER JOIN tableS y
ON x.userId = y.userId;
step 4) drop tableA
step 5) rename tableB to tableA;
SOLUTION B:*
partition exchange will definitely be an excellent option.
But we need inputs on what basis we can partition?
If I partition by date, then the users in the new file could be spread across many partitions and it wont be possible to do it.

Advice needed: loading text

I have a two colunmn table. On one side I have static copy. Specifically an Actionscript. the other column will be for a specific description for a certain section of the script (the user will select a section by clicking on it). Each part of the code will have a different explaination, so I'm unsure how to best accomplsh this. using a frame set, making each explanation its own page. Use some Javascript to load in text as selected.
If anyone can give me a good suggestion on the best way to do this, and/or a link it would be greatly appreciated

I'm a bit confused, you say the one side is static text, "to be specific Actionscript". Are you storing the text as a Flash object? The right side sounds like a cross between Spry master detail ( http://www.adobe.com/designcenter/dreamweaver/articles/lrvid4047_dw.html ) or a tabbed panel in a vertical setting as opposed to horizontal ( http://labs.adobe.com/technologies/spry/ui/samples/tabbedpanels2/SpryTabbedPanels2_sample1 .html ).
Can you please clarify the one side with the Actionscript and then come back and state whether the master/detail is what you are looking for or the tabbed panel? Then we will be able to help you out more.

I have constant K8N Neo2 problems advice needed. (long) Update

I need some advice on what my problem might be and if I need to RMA the motherboard or power supply.
I have a new Athlon 64 3500+ processor, MSI K8N Neo2 Platinum BIOS v1.3 motherboard, with 2 512MB DIMMs of Corsair Value Select Memory. I have had and am still having a series of crashes and lock-ups I will list below. FULL SYSTEM SPECS BELOW AT BOTTOM.
I initially installed the motherboard with a SINGLE 120GB hard drive from the old machine and the installed the memory in memory slots 1 & 2 to try dual channel memory mode. I then formatted the C partition and did a clean install of Windows XP Professional with SP2, installed the MSI drivers on the installation CD that came with the motherboard (Nvidia nForce3 Version 5.03 System Drivers, Realtek gigabit ethernet driver, Realtek AC97 audio driver) & the GeForce v66.93 video driver. I then got my first blue screen "MACHINE_CHECK_EXCEPTION" crash, I ignored this crash and rebooted. I shortly got a black screen crash which I also ignored.
I then installed a new 200GB hard drive and a old 120GB so I could transfer the data from the old 120GB to the new 200GB drive. The data transfer went fine. As I was preparing to install some applications I then got my second blue screen "MACHINE_CHECK_EXCEPTION" crash. Suspecting the Corsair Value Select Memory could not handle dual channel I ran Memtest-86 for 2 passes and got NO errors with the memory in dual channel mode, so I left it.
With my data backed up on the 200GB new drive I removed the new 200GB and the second 120GB hard did another clean install of Windows XP Professional with SP2, this time with Nvidia’s nForce3 Version 5.10 system drivers, the Realtek gigabit ethernet driver and Realtek AC97 audio driver from the motherboard installation CD & the GeForce v66.93 video driver. I downloaded the latest version of Core Center and installed it and got it working. CPU temperatures were showing a low of around 29C, average of about 44C, and spikes at full loads of about 55-57C. I then ran Ghost to back up the boot partition. I installed all my applications, reinstalled the 200GB and 120 GB hard drives moved some data around with no crashes.
I then installed Rome Total War and played for about 2 hours and had one black screen crash after the reboot played for 4 more hours with no problems so I shut down and went to bed.
In the morning I got up started the computer let it run for awhile the CPU temperatures were in the low 30Cs to low 40Cs I tried to copy some files from the D partition to desktop and the screen freezes I waited about 5 min. with no change and no drive light activity so I hit the reset button. Upon reboot I got a ‘no system disk found” error, I went into the BIOS and checked the drive set-ups and boot priority, everything was correct. I tried for a half hour to get the system to boot with on luck. I used the Ghost to restore the partition image I had made earlier and still no boot. I finally decided to reinstall XP again put in the installation CD and when I got to the screen where you decide where to install Windows I changed my mind quit and bingo the machine boots into the restored Ghost partition???? I started to reinstall my applications got one more blue screen"MACHINE_CHECK_EXCEPTION" crash and another screen freeze that I had to reset.
So I decided to start from real scratch I removed the new 200GB and the second 120GB hard drive ran Killdisk on the boot drive, made a new clean 20GB C partition and did another clean install of Windows XP Professional with SP2, this time with Nvidia’s nForce3 Version 5.10 system drivers, the Realtek gigabit ethernet driver and Realtek AC97 audio driver from the motherboard installation CD & the GeForce v66.93 video driver. I installed the latest version of Core Center and installed it and got it working. CPU temps were as before.
I tested the memory with Memtest-86 again 2 passes no errors. Just in case I then moved one of the memory DIMMs to memory slot 3 out of dual channel mode and to a slower speed and ran Memtest-86 for about 20 hours with 21 passes with no memory errors, so I think memory can be ruled out as the problem.
Next I installed my applications I got one screen freeze that I had to reset. I reinstalled the other 200GB and 120GB hard drives. After I got all my applications install and Ghosted the boot partition. I have had one more one screen freeze that I had to reset.
I have a problem I simply cannot figure out. The memory is obliviously fine. While I have seen CPU temperatures spikes as high as 57C the CPU temps as reported by Core Center averages in the high 30Cs or low 40Cs and most of crashes/lock-ups don’t seem to occur during high CPU load/temp. The power supply might be a little light for the system but many of the crashes have occurred with only one hard drive in the system. The fact after one for the lock-ups the system would not boot for awhile and then magically just booted gives me concern there might be a motherboard problem.
Any solution ideas would be appreciated. Should I RMA the power supply, the motherboard, or both.
Full system specs:
Processor: AMD Athlon 64 3500+, Socket 939, 0.13 Micron, with retail heatsink and fan.
Motherboard: MSI K8N Neo2 Platinum BIOS v1.3
Memory: Corsair VS1GBKIT400 1GB (2 x 512MB DIMMs) Kit DDR400 PC3200 CAS2.5 Value Select Memory - one 512MB DIMM in memory slot 1 and one 512MB DIMM in memory slot 3 running at DDR333 speed.
Video Card: Chaintech GeForce4 Ti 4600
Drives:
Maxtor 6Y120L0 120GB hard drive as master on IDE channel 1. 3 partitions C (boot partition), D, & E.
Seagate ST3200822A 200GB hard drive as slave on IDE channel 1. Single partition.
Maxtor 6Y120L0 120GB hard drive as master on IDE channel 2. Single partition.
Sony DRU-500AX DVD-RW as slave on IDE channel 2.
SATA disabled in BIOS.
No PCI cards.
Case: Antec SX 835
4 80mm case fans (2 fans in front blowing in, 2 fans in rear of case blowing out).
Power Supply: Thermaltake W0008RUC Silent PurePower 420W w/Active PFC
Power Supply Specifications:
Maximum Power: 420W
PFC: Acitve
Power Good Signal: 100-500ms
Hold-up Time: > 16ms at Full Load
Efficiency: > 65%
Over Voltage Protection: +5V trip pointInput Voltage: 100 VAC / 240 VAC
Input Frequency Range: 47-63 Hz
Input Current: 8.0A
Output: +3.3V@30A;+5V@40A;[email protected];+12V@18A;[email protected];+5VSB@2A

Quote
I then installed Rome Total War and played for about 2 hours and had one black screen crash
Great isn't it (although not without the occasional crash)
Would you say it's better but not there yet ? or the same ?
I thought the same as Ibn Quote
Your PS unit is a little weak for that much hardware, but I doubt thats your problem as well
re your PSU, given youv'e got a less hungry Graphic Card, thought it was at worse marginal, have seen worse.
To investigate further it may be worth diconnecting one of your HD, maybe the 200gb for a time.
It's a small thing but it may be slightly better to have both your maxtors together on IDE channel 1, given their identical.
good luck - keeo us posted

Advice needed in BSO DB loading

Similar Messages

Maybe you are looking for