Advice Needed: Installing APEX 4.2.1 with SSO 10g

I am running in an environment here where it is mandatory that I run SSO 10g (the old verison 10.1.x.x OAS based). How do I go about enabling SSO in APEX 4.2.1? Can I use the same ssosdk902.zip I used with APEX 3.x.x or do I need a different one? There is no plans to go to upgrade off of our legacy 10g SSO or go to OAM based SSO. I would appreciate any information that can be offered.

Hi David,
yes, you can use the same SDK. You just have to take care to follow the same steps. It's easy to forget to re-create synonyms and do grants after an APEX upgrade.
Regards,
Christian

Similar Messages

How to install apex on windows x64 with 10gR2?

Hello,
today I tried to install the http-server for our 10gR2-database. We are using windows x64.
But I cant find OHS for this release. How can I install apex then?
Regards,
Mark

have you tried the installation, or did you just ask in advance?
in the last wekks i did a lof of installation stuff on an x64 system using the old x32 versions. even oracle sw like 10.2.0.3 client etc.
and most oft the stuff was up and running just like on an x32 system.
just keep in mind that the directory structure an x64 is slightly different #
if u install x32 software the default installation path is "C:\Program Files (x86)" and in the registry a speacial key hklm\software\wow6432node
just in case you need to patch.
in my opinion it would be worth to give i a try, but remember not on a productive system.
i'd like to hear about your results
regards peter
Edited by: yeti on Jul 3, 2009 2:41 PM

Advice needed installing XP Pro onto RAID Mirror with XP Home on IDE already

Hi Y'all,
I have the rig described below.
Currently, I'm running Win XP Home SP2 booting on the 80gig IDE drive, with another partition on it holding my files.
I want to clean install XP Professional SP2 (slipstreamed) onto the 120gig SATA Mirror RAID array and use that as the boot drive. This is empty but has been formatted and partitioned so the system recognises it as a drive.
Once that's done I want to wipe off XP Home and use the IDE drive as a pagefile and backup drive.
I had thought of doing it this way:
1. Prepare floppy with SATA RAID drivers v1.0.0.19 (Files: fasttx2k; txtsetup.oem; Fasttx2k.cat; fasttx2k.INF; fasttx2k.sys; README.TXT)
2. Erase all partitions on the RAID mirror but leave both physical drives installed
3. Remove the IDE drive
4. Boot from Win XP Pro SP2 CD ROM and install the SATA drivers at the F6 prompt
5. Continue WinXP install as normal onto the RAID drive
6. Reconnect the IDE drive after OS has installed
7. Select Win XP Pro as the OS to boot
8. After bootup erase Win XP Home partition
9. Partition the RAID drive to have 2 partitions, one (C:) for the OS, the other (D:) for my files
10. Use Files & Settings Transfer Wizard to repopulate the OS with my stuff (previously exported to a safe place).
11. Get on with life...
Can anyone please advise if they forsee any problems doing it this way.
Just to show that I am really confused, advice I've read in the Windows XP Forum says I should break the mirror before doing trying to install any OS to a RAID array and use just one of the physical 120gig SATA drives to install XP Pro onto. Once this has been done I should rebuild the mirror and the drives will automatically become mirrored once the data has been duplicated to the 2nd SATA.
Is this the only way to do this? Is this the best way to do this (does WinXP install badly to a mirror RAID that has already been created)?
Advice I've already read on the forum here has only confused me further because:
a) it assumes a level of knowledge that I don't seem to have
b) it doesn't deal with my exact circumstances.
All help gratefully received.

An update on the situation.....
I am trying to install Win XP Pro SP2 (slipstreamed) onto a RAID Mirror of 2 Hitachi Deskstar SATA drives on my MSI K7N2G-ILSR. This is the exact procedure I've followed:
1. Formatted (both SATA drives) as drive I: using Windows Disk Management tool in WinXP (The mirror is seen by the BIOS & Fastrak BIOS)
2. Started Win XP Pro install via CD in d:\
3. Pressed F6 when requested
4. Windows Setup loads normally
5. Options to install 3rd party drivers for mass storage devices & other things appear
6. Press S to start installing RAID drivers
7. Insert floppy into A:\ & press Enter
8. Select Promise Fastrak 376 Win XP driver
9. Get following error message:
File \WINXP\fasttx2k.sys caused an unexpected error (18) at line 2113 in d:\xpsprtm\base\boot\oemdisk.c.
10. Press Enter to continue
11. Setup doesn't recognise the SATA drive I: so it doesn't appear in the list of partitions on which to install XP Pro
I've tried it every which way.
The following with IDE1 HDD disconnected, i.e. no operating system installed:
1 SATA drive only (mirror broken)
1 SATA drive striped array
Both SATA drives (mirror functional)
The same with IDE1 HDD connected and starting Windows Setup from within XP Home...
The only difference is if I use the original Win XP Pro disc (without SP2 slipstreamed) when the error message changes to:
File \WINXP\fasttx2k.sys caused an unexpected error (18) at line 2108 in d:\xpsp1\base\boot\oemdisk.c.
In a thread here there is mention of an error in a file but it isn't directly related to my mobo, so I am reluctant to fiddle with the file unless someone can explain clearly what needs changing. I'm just trying to find the thread at the moment.....
This is the text contained within txtsetup.oem:
[Disks]
d1 = "Promise FastTrak 376 Driver Diskette", \fasttx2k, \
d2 = "Promise FastTrak 376 Driver Diskette", \fasttx2k, \nt4
d3 = "Promise FastTrak 376 Driver Diskette", \fasttx2k, \Win2000
d4 = "Promise FastTrak 376 Driver Diskette", \fasttx2k, \WinXP
[Defaults]
scsi = FastTrak_TX2K_xp
[scsi]
FastTrak_TX2K_xp = "WinXP Promise FastTrak 376 (tm) Controller", fasttx2k
FastTrak_TX2K_nt5 = "Win2000 Promise FastTrak 376 (tm) Controller", fasttx2k
FastTrak_TX2K_nt4 = "WinNT Promise FastTrak 376 (tm) Controller", fasttx2k
[Files.scsi.FastTrak_TX2K_xp]
driver = d4, fasttx2k.sys, fasttx2k
inf = d4, fasttx2k.inf
catalog= d4, fasttx2k.cat
[HardwareIds.scsi.FastTrak_TX2K_xp]
id="PCI\VEN_105A&DEV_3376", "fasttx2k"
[Files.scsi.FastTrak_TX2K_nt5]
driver = d3, fasttx2k.sys, fasttx2k
inf = d3, fasttx2k.inf
catalog= d3, fasttx2k.cat
[HardwareIds.scsi.FastTrak_TX2K_nt5]
id="PCI\VEN_105A&DEV_3376", "fasttx2k"
[Files.scsi.FastTrak_TX2K_nt4]
driver = d2, fasttx2k.sys, fasttx2k
inf = d2, fasttx2k.inf
[Config.fasttx2k]
value = "", Tag, REG_DWORD, 1
I've also tried the following:
Change Boot sequence to CD-ROM> SCSI> HDD-0
Delete txtsetup.oem from floppy - Setup then says it's missing
Copied original drivers from nVidia driver & utility disk
None of these things has made the slightest difference
Need further help please!

Advice needed on Apex and oracle context

Hello,
I'm facing the next issue:
When I log into my Apex application I set a context site_id with a number.
I'm wondering if it is needed to set my context on every page or is one time enough?
At the moment it is working when I set my context one time when logging in.
On other pages I created an item where I display my context using:
return pck$context.f_get_site_id;
FUNCTION f_get_site_id
RETURN NUMBER
IS
BEGIN
RETURN sys_context(c_ct_context,c_ct_site_id);
END f_get_site_id;
So my question is: is it needed to create a process that executes itself on every page with setting the context or is one time enough?
Kind regards,
Oli

Well, for your purpose, you can make that assumption. The net result would be the same.
In reality, though, each page view is associated with a database session from the database connection pool managed by modplsql. You have no idea which database session you are "attaching" to for a subsequent page view. Thus, you should always set this context for each page view.
Strictly speaking, it's not a new database session. But for your purpose, you might as well operate like it is. Make sense?
Joel

Help/advice Needed! Paid for 2 years with no servi...

I have been with BT for 2 years since we moved into our first home, paying approx £40 a month for phone line and broadband! When we initially signed up we were asked various questions to see what product would be best for us, we told them we wouldn't be using phone line as we use our mobiles and would only use the wifi for childrens iPad! We were told to download BT app and log into wifi using email and password which we have done for 2 years! The wifi has always been very slow Nd hit and miss but we live in middle of no where so thought it was our area! After 2 years we have decided to start using home phone for childrens school purposes! So we bought phone, plugged it in and no dialling tone! Called BT who sent out engineer within a week! When engineer arrived he asked where is our hub? My response being whats a hub? After explaining how we usually connect to wifi he explained that that's not our wifi and a hotspot! So basically been paying for over 2 years never used land line or Internet due no fault of our own! We were never told about a hub or received one? The engineer told me to call and complain so which I did over 3 weeks ago! The advisor says he would fill in a form and pass on to his manager, but sent is a hub out which is charged us for? The hub has came and I still can't get any internet after spending another 2 hours on phone doing various tests they can't get it working and are sending out another engineer and was told could possibly be charged £129 for! As you can imagine I am furious with? I still haven't heard back from anyone and have sent a complaints form in also! Can anyone give me any advice on where I stand as I'm not very good with technology? Thanks

Hi Emmaburke87,
Welcome to the community forum. I'll be able to take a look at the details of your complaint. Please can you send me in your details using the "Contact The Mods" link found in my profile.
Thanks
PaddyB
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Advice needed on sharing/registering logic express with 2 users

Me and my mate, have got into audio production, and i am wondering if we can BOTH register the same logic program.
Is there a specific limit on how many users can be on one single program? Surely logic must allow you at least 2 users, say incase you have a mac at home, and one in a seperate studio.
All replys will be greatly appreciated.
Thanks in advance
Dan
amd athlon xp Windows XP Pro

No Dan,
I'm affraid you can't do that, it's highlly Illegal,
You can't register one licence to two persons,
You can install it on two of Your machines, (not your mate's one)
for the reason that You can only use one at the time.
Otherwise, it will be a paradise, everyone would find software mates
and split the price and I would be on Pro instead of LE! :o)
I believe you can have LE as an academic (if you are one or your mate) for a fraction of the price.
Anyway, welcome to the forum, I wish that you have all the fun with LE and make nice music with it.
Kindly Regards,
Jorge

What are the minimum programs I need installed from apple to sync with my iphone 5s? Which may I uninstall?

I have the following. I only need to sync my iphone with my computer once a month and be able to use Itunes. Which may I safely uninstall while still being able to sync in the future?
Processes---
AppleMobileDeviceService.exe (YSLoader.exe)
APSDaemon.exe (Apple Push)
iCloudServices.exe (iCloud)
mDNSResponder.exe (Bonjour Service)
Programs--
Apple Application Support
Apple Mobile Device Support
Apple Software Update
Bonjour
iCloud
iTunes
Thanks!

The don't run until needed. They are not programs; they are system services (except for iTunes), and are normally suspended until they receive an interrupt. If you really want to stop them you can go to the Control Panel, Services icon, and stop them. Then start them when you want to use them. You will need an Administrator account to do this, however.
Launch the Task Manager, Processes tab, and see how much CPU they use. It will generally be zero except when the phone is connected, either through WiFi or USB.

Advice needed for update to x-fi with m5

hey chaps! i just got inspire m5300 & using it on my Soundmax (onboard) provided on intel 865gbf, i expected it vl sound good but i vl rate it on avg., no doubt qulaity is awesum but not geting a feel of using creative at my desk. so need an advice, is dis my sound card not up to d mark.. it supports 5. nd running my box well,
if suggest for an upgrade kindly let me knw which one will give that clarity. i heard nd saw x-fi alot, is it worth.. or over creti've web portal i saw a simple 5. surround card will that work for gud quality too..
how costly gona update gona be, pls give a rough idea.
waiting yaa..

Hi Exorcist-devel,
Are you a gamer or more of a music lover?
Some sound cards are geared towards gaming while others are more for music playback, music creation, etc...
I would also recommend contacting support as they are in a better position to advise you.

Advice needed: join fact to time dimension with between clause

Hi All,
I've got 1 dimension and two fact tables. The 1 dimension could serve as a time dimension.(not specifically marked as this is a time dimension)
My Tables look like this (simplified)
Dim1:
date_pk (unique identifier)
date
month
year
fact1:
iid_date (foreign key to date_pk)
fact1_amount
Fact2:
begin_date
end_date
fact2_amount
In the physical layer i have a complex join between fact 1 and dim1 (date_pk = idd_date) and a complex join between fact2 and dim1 (dim1.date between fact2.begin_date and fact2.end_date and dim1.date <= CURRENT_DATE). In the business model i have complex joins between fact1 and dim1 and a complex join between fact2 and dim1 without further specification.
What I would like to achieve in Answers is that I select a Year and a Month from dim1 and add fact1_amount and fact2_amount to the same report and that the report shows both amounts. I would like some advice on how to set this up. Further more how to add a drill from year to month to date and what should I do when I'm willing to add more facts joined to the same Dim1
Any Advice is greatly appreciated
Gilles

Hello MMA1709,
You're right, this setup works!
But...
When you add an hierarchy and mark it as a time dimension it doesn't work anymore. It gives the following error in the consistency checker:
[38086] Physical table Dim1 in the time dimenison table source Dim1 is part of a complex join condition
And that means you cannot use any timebased calculations (AGO and TODATE). When I just create an hierarchy and do not mark it as a time dimension the hierarchy works well.
Any suggestions?

Help needed to use only SQR reporting with Oracle 10g

I have very old SQR reports (ver 2.28) that are still being used by connecting SQR to an Oracle7 DB. We have migrated the data from Ora7 to Oracle 10.2.0.4. The issue is that SQR 2.28 is not able to connect to Oracle 10.2.0.4. Hence I want to use the new version of SQR that is part of OBIEE.
I am not familiar with OBIEE and my interest is only using the SQR portion of it.
1. Can any one help me as to how to go about installing SQR portion of OBIEE on a Linux Itanium 64-bit box? My Oracle 10.2.0.4 DB is also running on the same box.
2. What are the minimum components of OBIEE I need to install to make use of SQR ?
3. Any other relevant information
Thanks.

When installing webgate, make sure the Access Server is running. You will get this error if Access Server is down or not reachable. ( Make sure from the machine where you are installing webgate you can ping to Access Server by Name).
Thanks
Ram

Install APEX to work on existing Oracle 10g R1 database

I want to use APEX on an existing Oracle 10g R1 database. If I install it normally with the program downloaded from your site, it installs its own database that you use.
How can I set / install it to use the existing database instead of its own database?
Elsie Pretorius

Hi guys,
Thanks for the info and input. Is there anybody have sucessfully done this. Most of the info that out there, the README in the patchset all pointing to upgrading the OCS, not installing the OCS on top of an existing 10g AS and DB. I'm thinking installing the OCS R2, and then patching and upgrade it to 9.0.4.2 or 4.3 and then point or move it to the existing 10AS and DB. This is where I'm quit blur at the moment.
Anyway thank for all the info.
Regards
Din

Forms 6i C/S with Oracle 10g Standard Edition

¿Somebody had installed Developer 6i C/S with Oracle 10g Standard Edition on Windows 2000, Windows 2003, Windows XP Professional?
¿What about the results?

I believe this particular combination (6i Forms with 10g database) is not actually supported, so is perhaps best avoided.
My own experience is that these forms run ok against a 10g database if compiled against a non-10g database, but if you try and compile the 6i form while connected to a 10g db, the results are unpredictable - forms which compile perfectly well against 9i fail against 10g, with all sorts of horrible looking internal error codes.
regards
Andrew
UK

How to install apex 4 with Oracle Fusion Middleware Web Tier Utilities

Hi all,
Does any one know how to install apex 4 with Oracle Fusion Middleware Web Tier Utilities ?
I follow the instructions http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/toc.htm but there's no directory called ORACLE_HTTPSERVER_HOME\Apache and ORACLE_HTTPSERVER_HOME/ohs/modplsql/conf/dads.conf
I don't know where's dads.conf file to make change
Please hellp me on this case
Thanks & regards

A little bit odd is an understatement. The first time I found I had to download over 1Gb of stuff to run a simple web server I practically fell over! Hopefully, the Apex Listener team will update it to have backwards compatibility with mod_plsql and we can ignore trying to install Oracle Fusion Middleware Web Tier Utilities...
However, until then the TNS Names error generally means that there isn't a TNS alias set up for the database you have referenced in the mod_plsql dad. If you open up the dads.conf file you should see something like
PlsqlDatabaseConnectString localhost:1521:databasealias
If you then open a command prompt and do TNSPING databasealias you should get a response like this
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = localhost)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = ***)))
OK (20 msec)
If you don't it means you need to add it in.
Hope this helps

Installing APEX 3.1 with HTTPServer 10g (from Companion CD)

Hi everyone,
Our database is 10.2.0.1 and I installed in a seperate home the HTTPServer coming with the 10gR2 companion CD (Apache Standalone install). The default port I use is 7777 (for the welcome page). Then I installed APEX 3.1, following the directives in the installation guide.
Strangely, when it's time to configure the HTTPServer, the documentation talks only about version 9.0.3 or 11g, not the 10g version. It does mention OAS 10g, but is it the same than HTTPServer 10g standalone?
Because of this confusion, I'm unsure if we need to create a "marvel.conf" file (like we can read in the apex 2.2 doc about configuring the 10g HTTPServer as I want), or edit the "dads.conf" file.
I tried to edit the dads file and restarted the HTTPServer. When I try to connect to APEX, I get the XDB login window but it doesn't accept my admin login. After 3 tries, I get an "unauthorized" page.
Can you tell me if the Oracle XML DB HTTP Server should be at the same port than the HTTPServer? Right now, I've set the XDB HTTP server at port 8090, but like I said, the 10g HTTP Server was installed by default at 7777.
So, when I connect to http://server:8090/pls/apex or http://server:8090/pls/apex/apex_admin, I get the XDB login but that's it. Can't login. If I connect to http://server:7777/pls/apex, it's worst, I get "Service termporarily unavailable".
I read in the forums that it could be related to the "images" folder not being accessible, but I did install APEX with the alias /i/ and I did copy the images folder in the Apache folder. So, I'm at a dead end.
Do you have any suggestions? Does the 10g HTTP Server behave differently than version 9 or 11?
Thank you for your help!
Geostc

Hi Geostc,
XML DB HTTP Server is not required when you are using Oracle 10g. It is only required when you are using Oracle 11g. So, uninstall this component from your database, and follow the steps given in the URL below:
http://www.idevelopment.info/data/Oracle/DBA_tips/Oracle_Application_Express_2/APEX2_5.shtml
Your issue will be resolved.
-Md Sarfaraz Khan

APEX 3.1.2 install with sso, error "requested url ../plsapex/f.. not found"

Question: why is sso rewriting the url from .../pls/apex/f?p=.. to .../plsapex/f?p=?
Can anyone help?
Thanks.
Abstract: APEX 3.1.2.00.02 install with sso config, error "requested url ../plsapex/f .. was not found"
Situation:
Upgraded from Apex 3.0.0.00.20 to Apex Application Express 3.1.2.00.02
I get to my apex_admin and apex builder pages with url: [http://machinename:port/pls/apex] or
[http://machinename:port/pls/apex_admin]
When I try to access our application using no authentication scheme everything is fine.
But when I switch to sso authentication, somehow strangely the url [http://machinename:port/pls/apex/f?p=application_number]
is rewritten to sso [http://machinename:port/plsapex/f?p=application_number].
[https://test.insitehome.org/pls/apex/f?p=119]
reappears in browser as
[https://test.insitehome.org/plsapex/f?p=119:1:2095395898953485]
entries of select * from flows_030100.WWSEC_ENABLER_CONFIG_INFO$
"LSNR_TOKEN" "SITE_TOKEN" "SITE_ID" "LS_LOGIN_URL" "URLCOOKIE_VERSION" "ENCRYPTION_KEY" "ENCRYPTION_MASK_PRE" "ENCRYPTION_MASK_POST" "URL_COOKIE_IP_CHECK"
"HTML_DB:test.insitehome.org:443" "LS$XXXXXXXXXXXXXXXX" "6XXXXXXX" "https://testsso.insitehome.org/pls/orasso/orasso.wwsso_app_admin.ls_login" "v1.2" "0AXXXXXXXXXXXXX" "6FXXXXXXXXXXXXXXXXXXXXXXXXXXXXX" "C2XXXXXXXXXXXXXXXXXXXXXXXXXXXXX" "N"
entries of select * from flows_030100.WWSEC_SSO_LOG$ showing ../plsapex/.. rewrite,
after trace turned on with SQL> @secdbg.sql;
ID MSG LOG_DATE
1259 entry: urlencode 15-DEC-08
1260 encoded URL is https%3A%2F%2Ftest.insitehome.org%3A443%2Fplsapex%2Ff%3Fp%3D119%3A1%3A1562268139343648 15-DEC-08
1261 exit: urlencode 15-DEC-08
1262 entry: urlencode 15-DEC-08
1263 encoded URL is https%3A%2F%2Ftest.insitehome.org%3A443%2Fplsapex%2Ff%3Fp%3D119%3A1%3A1562268139343648 15-DEC-08
1264 exit: urlencode 15-DEC-08
copy of last entries Apache log file
[Mon Dec 15 13:30:33 2008|http://forums.oracle.com/forums/] error [http://client 172.18.5.120|http://client%20172.18.5.120/] [ecid: 120704279613,1|http://forums.oracle.com/forums/] File does not exist: /u02/test_10gr2_hm2/Apache/Apache/htdocs/plsapex/f
[Mon Dec 15 13:32:18 2008|http://forums.oracle.com/forums/] error [http://client 172.18.5.120|http://client%20172.18.5.120/] [ecid: 124999354851,1|http://forums.oracle.com/forums/] File does not exist: /u02/test_10gr2_hm2/Apache/Apache/htdocs/favicon.ico
[Mon Dec 15 13:32:18 2008|http://forums.oracle.com/forums/] error [http://client 172.18.5.120|http://client%20172.18.5.120/] [ecid: 120704387543,1|http://forums.oracle.com/forums/] File does not exist: /u02/test_10gr2_hm2/Apache/Apache/htdocs/plsapex/f
[Mon Dec 15 13:32:21 2008|http://forums.oracle.com/forums/] error [http://client 172.18.5.120|http://client%20172.18.5.120/] [ecid: 124999354854,1|http://forums.oracle.com/forums/] File does not exist: /u02/test_10gr2_hm2/Apache/Apache/htdocs/favicon.ico
[Mon Dec 15 13:32:21 2008|http://forums.oracle.com/forums/] error [http://client 172.18.5.120|http://client%20172.18.5.120/] [ecid: 120704387663,1|http://forums.oracle.com/forums/] File does not exist: /u02/test_10gr2_hm2/Apache/Apache/htdocs/favicon.ico
[Mon Dec 15 13:32:25 2008|http://forums.oracle.com/forums/] error [http://client 172.17.241.64|http://client%20172.17.241.64/] ecid: 1229365945:172.17.241.64:23211:0:817,0 \nOSSO E09: No Oracle SSO support for POSTing data to protected resource yet.\n
[Mon Dec 15 13:35:09 2008|http://forums.oracle.com/forums/] error [http://client 172.18.5.120|http://client%20172.18.5.120/] [ecid: 107819660799,1|http://forums.oracle.com/forums/] mod_plsql: /pls/apex/wwv_flow_custom_auth_sso.process_success HTTP-404 \nwwv_flow_custom_auth_sso.process_success: MANY PROCEDURES MATCH NAME, BUT NONE MATCHES SIGNATURE (parameter names)\n
[Mon Dec 15 13:37:25 2008|http://forums.oracle.com/forums/] error [http://client 172.17.241.64|http://client%20172.17.241.64/] ecid: 1229366245:172.17.241.64:19598:0:70,0 \nOSSO E09: No Oracle SSO support for POSTing data to protected resource yet.\n
[Mon Dec 15 13:42:25 2008|http://forums.oracle.com/forums/] error [http://client 172.17.241.64|http://client%20172.17.241.64/] ecid: 1229366545:172.17.241.64:23157:0:832,0 \nOSSO E09: No Oracle SSO support for POSTing data to protected resource yet.\n

1. I am able to get to the SSO page. I am redirected to the sso page first
when unter the url [https://test.insitehome.org/pls/apex/f?p=119:1]
I am able to enter the username and password.
But once I click the login button I get the following message :
" Not Found
The requested URL /plsapex/f was not found on this server.
Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server Server at test.insitehome.org Port 443"
2. The mod_osso.conf file was not changed for our Apex upgrade. The contents of the osso.conf file though are not readable.
I tried commenting out the
#OssoConfigFile /u02/test_10gr2_hm2/Apache/Apache/conf/osso/osso.conf
line in the mod_osso.conf file. url rewrite to ../plsapex/.. did not change.
Thanks.
Douglas
1. The contents of OssoConfigFile /u02/test_10gr2_hm2/Apache/Apache/conf/osso/osso.conf
^E~H/ôMæ~DÑ~I~PG^:~I| u^~T=Èi^V^OÜ.¦Â^PhW^AºÙ·G»?nÓ^MsF~C®Û¶åÌ4Ír^S)±~Y£µìø>oA~W~W~ÌÂ~W²E~^K^Yg~I#\^?^H~U^LÜ æiò
~ËîÁn^S~J@VI³^YªÞ~SÒüc¿ÿ|üw¶ï.Gl^X^U~N31p^Q©»$@~N¤Á_q0beÁ:Ô&ÙÇÁts^[ÓÔsJÌÖ~W£F^W~W^^è3Aµ^[¡>u^D|f^B~SèDÄ¦íþlýÄ^KÕæíUu^Gxg~--D^--^GuÑ-^PAÇ4^H^@Px«Ó^--`Gf^PuJxützþ<¸¡~JÛ¯ýa~^G~G^U^WSk÷u$ßâ´às~@8^Y¨,--^RË2ûçÁëÌó@¦½Jg£Ør^RCs<~@~RÙ·ßóÿÞN@ø0£~Gõr^S~N^R±½^_~W~\fÔ|óÀ^W~F~T^XO~PHvú|^F(·%"4Ýlâ~J¸~H^N0#dÀ¸O^H^@~S^FZN2ìzåäN^Xn[T~\(¥ôy"z~XY¶2~TTg^Yýãæ~V¸ÿ^VUs^B~Hë^S^Z3~A>nzr~[^SlÀ;~D~Hã½Zö~U^C
2. Browser headers- using "Live HTTP headers"
showing the change in the browser url from .../pls/apex/.. to /plsapex/..
[https://testsso.insitehome.org/pls/orasso/orasso.wwsso_home.process_signon?urlc=v1.2~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
GET /pls/orasso/orasso.wwsso_home.process_signon?urlc=v1.2~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
Host: testsso.insitehome.org
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.4) Gecko/2008102920 Firefox/3.0.4
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
Referer: [https://test.insitehome.org/pls/apex/f?p=119:1]
Cookie: SSO_ID=v1.2~1~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orasso=9.0.3+en-us+us+AMERICA+5E6829A8119E1C0EE04011AC15F572DA+416E61A4441EBFF32F938E43B1C666B24FCDEED0AE4178FB7D0666DF2F8B242E83E304641F7BB27D2447D4235172D9FDAF1AF383E817CC68D3FAC8771CA0D15526CC58AFCA0862435154ABDA250A026D369DCCC3EC1DA333
HTTP/1.x 302 Found
Date: Fri, 19 Dec 2008 14:31:46 GMT
Server: Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server
Location: [https://test.insitehome.org:443/plsapex/f?p=119:1:4439918187386025|https://test.insitehome.org/plsapex/f?p=119:1:4439918187386025]
Set-Cookie: orasso=9.0.3+en-us+us+AMERICA+5E682B3E13BF540BE04011AC15F572DC+D7088454FEBAE9994BE0076646C00462FF614D0247361AC1D38957C467A4BD0B68508FA922065C7512D2DD7BC3BF02EE28F7281585308D54E0BCC5F3E3254F8DB6F3952C0C6D0F5B88B379B6686B1981F7DE4443A83FA03F;path=/;secure
Keep-Alive: timeout=60, max=1000
Connection: Keep-Alive
Transfer-Encoding: chunked
Content-Type: text/html; charset=UTF-8
Vary: Accept-Encoding
[https://test.insitehome.org/plsapex/f?p=119:1:4439918187386025]
GET /plsapex/f?p=119:1:4439918187386025 HTTP/1.1
Host: test.insitehome.org:443
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.4) Gecko/2008102920 Firefox/3.0.4
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
Referer: [https://test.insitehome.org/pls/apex/f?p=119:1]
Cookie: ORACLE_SMP_CHRONOS_GL=26:1229695773:876325; ORACLE_SMP_CHRONOS_LT=1229697115969
HTTP/1.x 404 Not Found
Content-Type: text/html; charset=iso-8859-1
Connection: Keep-Alive
Keep-Alive: timeout=5, max=999
Server: Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server OracleAS-Web-Cache-10g/10.1.2.2.0 (N;ecid=112453569346,0)
Content-Length: 326
Date: Fri, 19 Dec 2008 14:31:46 GMT
-----

Advice Needed: Installing APEX 4.2.1 with SSO 10g

Similar Messages

Maybe you are looking for