Advice needed on how to avoid bogus warning "suspected phishing site"?

I keep getting bogus warning "suspected phishing site" that sometimes blocks safe sites. I have checked the firewall, which is off and allowing all incoming connections. How can I avoid such bogus warning?

Have you tried the Reset Safari... in the pull down menu under Safari?
Allan

Similar Messages

  • Subject/Question: "WARNING: SUSPECTED PHISHING SITE" message has just recently come up for me EVERY time I go to a website on Safari. What do I do?

    This has been happening for me just recently, 12/2012... EVERY TIME I CLICK ON A WEBSITE, I get: WARNING: SUSPECTED PHISHING SITE.
    At first, I thought it was valid, but when I saw that it was doing it before EVERY page, I knew that something was wrong. I read through your comments from the past, but saw no indications of what was causing the problem then or how to fix it.
    I have a macbook 10.5.8, & I use Safari. Never had this problem before.
    Can anyone tell me what I need to do?
    I may have changed a few things in System Preferences... and...
    I have copied & pasted the email addresses from my spam to block in Yahoo mail to see if that makes any difference in the number of spam emails that I get. Probably not, as they are constantly changing email addresses, but thought I would try.
    That is all that I know that I have done.
    And now this is constant & annoying & I don't know what websites that I can trust.
    Please help.
    I haven't use this site much. Will I get an email to let me know if anyone responds? Or do I have to try to come back here to check for replies?
    Thanks again!

    Have you tried the Reset Safari... in the pull down menu under Safari?
    Allan

  • How to avoid safety warning when opening a pdf from an link in another pdf?

    I make pdf in Acrobat with links to other pdf files av have made. When i try to click a link to open the pdf, i get the safety question if trust it or if i will block it. How to avoid that question all the time?

    Hello Kvalitetetsansvarlig
    Try adding the PDF to the trust location in Acrobat
    Edit -> Preferences-> Security (Enhanced), Click on "Add File", and browse to your file.
    Click on "OK" button and check.
    Regards,
    Deepak

  • Advice needed on how to approach this, passing around strings

    Hello everyone,
    I'm new to network programming and I was just wondering if I could get some clarification and some advice on networking.
    Right now I have a serversocket program that accepts a connection from another server that is sending large strings (events), my server socket program takes these strings (events) and parses them and up stores them into an object and then into a multi-map.
    Now I'm going to take these events and turn them into a string again, and send them to a receiver.
    I'm confused on the processes of how this will happen.
    My Sever Socket program creates a server socket, and listens on port 5656, the program thats sending me the strings (events) connects to socket 5656, and starts sending me data.
    Now once this data is processed and stored as a message object, then what do I have to do to send it off to another program?
    Do I open up another Sever Socket, and listen on port 5000, then when that other reciever program connects to 5000 it will start sending those strings to it?
    If this is the case, what if there is no connection to 5000 to recieve the strings I'm going to send to it? Would I need to maybe store all the strings in a vector and when the client connects to port 5000, should I just start sending them from the vector?
    Or should the recieving application be also a server? So as soon as I get my first string, I can just use the Socket class, rather than the ServerSocket to create a connection like: Socket echoSocket = new Socket("taranis", 5000); Asumming taranis is the name of the server that wants the strings I parsed.
    So my application will have a SocketServer to accept the incoming string, then it will create a Socket and connect to another server to send the string?
    Thanks :D

    Or should the recieving application be also a server?That seems like much the better alternative.
    BTW why don't you just pass the events around in their original form, using Serialization, rather than string-ifying and de-stringifying them everywhere?

  • Advice needed on how to keep large amounts of data

    Hi guys,
    Im not sure whats the best way is to make large amounts of data available to my android  app on the local device.
    For example records of food ingredients, in the 100's?
    I have read and successfully created .db's using this tutorial.
    http://help.adobe.com/en_US/AIR/1.5/devappsflex/WS5b3ccc516d4fbf351e63e3d118666ade46-7d49. html
    However to populate the database I use flash? So this kind of defeats the purpose of it. No point in me shifting a massive array of data from flash to a sql database, when I could access the data direct from the as3 array?
    So maybe I could create the .db with an external program? but then how would I include that .db in the apk file and then deploy it to users android device.
    Or maybe I create a as3 class with an xml object init and use that as a means of data storage?
    Any advice would be appreciated

    You can use any means you like to populate your SQLite database, including using external programs, (temporarily) embedding a text file with SQL statements, executing some SQL from AS3 code etc etc.
    Once you have populated your db, deploy it with your project:
    http://chrisgriffith.wordpress.com/2011/01/11/understanding-bundled-sqlite-databases-in-ai r-for-mobile/
    Cheers, - Jon -

  • Advice needed on how to photograph stars

    Hi.
    I was wondering if anyone could give me advice on photographing stars,
    over the last few weeks. i've seen some stunning images of stars, and would love to find out is how to take stunning images off stars, my camera skills are limited, I would be using a full frame dslr, any advice would be grateful.....
                              john............

    These links should get you started:
    http://www.deep-sky.co.uk/imaging/dslr/dslr.htm
    http://www.deep-sky.co.uk/index.htm
    http://celestialwonders.com/index.html
    Wo Tai Lao Le
    我太老了

  • Advice needed on how to master a dj mix.

    hello, i hope i am posting this in the right forum. i use soundtrack pro to record my dj mixes.
    when i record a mix in soundtrack pro, it's 1 long song. sometimes certain parts of the mix come in at a lower volume than other parts.
    how can i bring up the volume on the lower parts and make them equally as loud as the other songs? or, how do i level out the volume without making the mix sound worse?
    any advice on getting the EQs and other settings right would be appreciated.
    if anything's not clear, please let me know.
    Message was edited by: ifone_lover

    immo wrote:
    Have you tried WaveBurner?
    A
    no, i have not. would waveburner be more appropriate for what i want to do post-mix?
    if so, could you elaborate?
    thanks for your response.

  • Repost from soundtrack pro forum: advice needed on how to master a dj mix.

    i posted the info below on the soundtrack pro forum and someone suggested i use waveburner to master my dj mix after it's been recorded:
    when i record a mix in soundtrack pro, it's 1 long song. sometimes certain parts of the mix come in at a lower volume than other parts because some records or songs aren't as loud as the previous song that it was mixed out of.
    how can i bring up the volume on the lower parts and make them equally as loud as the other songs? or, how do i level out the volume without making the mix sound worse?
    any advice on getting the EQs and other settings right would be appreciated.
    if anything's not clear, please let me know.

    immo wrote:
    Have you tried WaveBurner?
    A
    no, i have not. would waveburner be more appropriate for what i want to do post-mix?
    if so, could you elaborate?
    thanks for your response.

  • Warning: [unchecked] unchecked conversion.. how to avoid this warning?

    Hi all,
    When i compile my java file, i get this warning.
    Z:\webapps\I2SG_P2\WEB-INF\classes\com\i2sg>javac testwincDB.java
    Note: testwincDB.java uses unchecked or unsafe operations.
    Note: Recompile with -Xlint:unchecked for details.
    Z:\webapps\I2SG_P2\WEB-INF\classes\com\i2sg>javac -Xlint testwincDB.java
    testwincDB.java:15: warning: [unchecked] unchecked conversion
    found   : java.util.ArrayList
    required: java.util.ArrayList<java.lang.String[]>
        ArrayList <String[] > recRep2 = dbh.getReconReport2(projID);My functions are:
    public ArrayList getReconReport2(int projID)
            ArrayList <String[] > recRep2 = new ArrayList <String[] > ();
            String getReconReportQuery2 = "select recon_count FROM i2sg_recon1 WHERE PROJECT_ID = " + projID;
            int i=0;
            try {
            resultSet = statement.executeQuery(getReconReportQuery2);
                  while (resultSet.next())
                         recRep2.add(new String[1]); // 0:RECON_COUNT
                ((String []) recRep2.get(i))[0] = resultSet.getString("RECON_COUNT");
                         i++;
                  resultSet.close();
                  } catch (Exception ex)
                ex.printStackTrace(System.out);
            return recRep2;
        }and
    import java.sql.*;
    import java.util.ArrayList;
    import java.util.*;
    public class testwincDB
        public static void main(String args[])
        int projID=8;
        wincDB dbh = new wincDB();
        ArrayList <String[] > recRep2 = dbh.getReconReport2(projID);
        int totalRec = recRep2.size();
         for(int i=0;i<totalRec;i++)
        System.out.println(((String []) recRep2.get(i))[0]);
    }Thanks in advance,
    Lakshma

    found : java.util.ArrayList
    required: java.util.ArrayList<java.lang.String[]>
    ArrayList <String[] > recRep2 = dbh.getReconReport2(projID);This tells all about the warning.....
    public ArrayList getReconReport2(int projID)change it to:
    public ArrayList<String[]> getReconReport2(int projID)Thanks!
    Edit: Very late.... :-)
    Edited by: T.B.M on Jan 15, 2009 7:20 PM

  • Advice needed on how to track down a program after 3 mins upti

    Hi... really struggling with tracking down a daemon/script that is running on my system.... have openbox, with some gnome, xfce and lxde programs to make it more gui based. Wondering if someone can can help me track down the program that is over-riding my synaptics config?
    Basically, I have a synaptics config file in xorg.conf.d that is read and applied at boot. Then at around 3min 28 secs of uptime, this config gets overridden. I have stared at the output of top to see if there is anything showing up at around that time, but I not noticing anything!
    The arch wiki mentions;
    Gnome settings daemon may override existing settings (for example ones set in xorg.conf.d) for which there is no equivalent in any of the graphical configuration utilities. It is possible to stop gnome from touching mouse settings at all:
    Run dconf-editor
    Edit /org/gnome/settings-daemon/plugins/mouse/
    Uncheck the active setting
    It will now respect your system's existing synaptics configuration.
    however, this option is not available, so I am assuming this is not the cause (might be mistaken?), but am now lost. I have tried to remove dconf, but it has dependencies I use for smbclient, namely gvfs.
    Any ideas / help / guidance or what ever would be great!
    Thanks

    ninjaprawn wrote:no, the file itself is not being overwritten... just the values are being overridden...the values remain the same, just dont have any effect... and if I pass something like 'synclient CoastingFriction=5' this has no effect on the coasting speed, even if the value was 0 before.
    Oh, overridden. My bad, I read "overwritten" by accident. My apologies. Unfortunately I don't think I can help. Sorry :\. lsof should still help you if what you're trying to do is track though. GDB wouldn't be a bad idea, either.
    Last edited by FluxCapp (2013-06-17 22:37:15)

  • How to avoid being redirected to Chinese site?

    Hi, I cannot proceed my payment in euro as every time I choose a subscription, I will be redirected to Skype's Chinese site. Most of the payment methods listed there require Chinese credit cards. Would you please help me to solve this problem so that I can use my credit card (in euro) to make the payment?
    Thank you in advance!
    Yvonne

    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • I keep getting bogus "suspected phishing site" messages....help..

    My computer will not let me open articles on msn.com or cnn.com; it also stops me from opening trusted sources like photobucket from friends of mine. This is so aggravating and I don't know how to make it stop.

    Check System Prefernces>Security>Firewall. Is the Firewall turned on? If so then check Advanced. Is Block All Incoming Connections checked?

  • How to avoid warning messages in jump targets

    How to avoid the warning messages while using the jump targets from BW to R/3 ?
    example of warning message is as follows .
    Warning Selection for ABSTA cannot be uniquely assigned.
    RSBBS setting is done for the multiprovider & uses the info source 2LIS_11_VAITM .

    try doing the following:
    1.you can suppress "Settings > Suppress warnings from server" messages on ur BEx toolbar .
    2.Go to transaction RSRT, type in the query, click on the messages button, and suppress all messages
    3.In RSBBS, go to the sender query in change mode. There should be a tab in the middle column where you have to give your infosource name..
    For. eg If you want to jump from Cost centre report (BW) to Masterdata transaction in R/3, you ust assign this particular infosource in RSBBS settings.
    4.Apply note: 971614 or 975164 or OSS : 1013370 if applicable.
    Reagrds
    Dhanya.
    Assign points if this helps!!

  • HT4061 It is saying I need to do a restore - I accidentally unplugged during a download - I am scared I will lose my pictures from my recent family trip!!!  Please let me know how to avoid losing these pics.

    I need to do a restore - I accidentally unplugged during a download - I am scared I will lose my pictures from my recent family trip!!!  Please let me know how to avoid losing these pics.

    Hi @imobl,
    You sound like an Apple support guy who hasn't been able to answer my questions.
    To respond to some of the points you made,
    - I did not ignore Ocean20's suggestion. If you has read my post, you would have known that I took my phone to the apple service centre where they tried this restore on THEIR machines. I am assuming that Apple guys know how not to block iTunes. So I actually do not understand your point about me trying the hosts file changes on my machine. Do you not believe that apple tested this issue with the correct settings?
    - you also give a flawed logic of why the issue is a hardware issue. You mentioned that If I thought that the issue was with the software, i should try a restore and getting it to work. The problem is that my error (23), and many others comes up when the restore fails. And you would be astonished to know that not all errors are hardware errors. Sometimes even software errors prevent restores. Funnily enough Apple itself mention that 'in rare cases, error 23 could be hardware related'.
    - all Apple has done so far is replicate the issue. I don not know how anyone can conclude that the issue is a hardware issue.
    And by the way, I am not certain that this is a software bug. Again if you read my Posts, you will notice I only want a confirmation,/proof that the issue is hardware related as they mention..
    Please refrain do. Responding if there is nothing to add.

  • How to avoid the message in the dashboard report

    Hi,
                       I am developing Dashboard reports(graphs) using WAD. Query and WAD are working fine. I need to put a variable for Calendar Month or Year in the graph .I am populating the Variable with default value initially and I am getting the correct result . But if I change the Variable value second time, I am getting a message (type I(information) ) in the same screen which says that 'You cannot change variable ZCALYEAR_WT01 for charact. 0CALYEAR during query navigation' . And below is the detailed information about the error message.
    The Can be changed in query navigation property has been set for variable ZCALYEAR_WT01, characteristic 0CALYEAR. However, the variable is used in the query in such a way, that the system is unable to apply this change-option.
    This can, for example, occur under the following conditions:
    Characteristic 0CALYEAR is filtered by additional restrictions (the restrictions must be joined using an OR-connection)
    A second characteristic, which is restricted by a variable, is compounded to charcteristic 0CALYEAR.
    Variable ZCALYEAR_WT01 is a hierarchy node variable, but the hierarchy has not been determined uniquely.
    A variable can be changed during query navigation only if it is used exclusively in a drilldown-characteristic, and there are no further restrictions to the characteristic other than this variable. There must be no additional characteristics with variables compounded to the characteristic you are working with. For variables for hierarchy nodes, the hierarchy must be determined uniquely and agree with the set display hierarchy.
    Also, if the characteristic value is moved, for example (ZCALYEAR_WT01 - 1), the variable is no longer able to be changed when navigating queries.
    System Response
    The entry ZCALYEAR_WT01 Can be changed during query navigation is not applied.
    Procedure
         I checked the query definition and it is not having any offset or any other restrictions for Calendar Year
    It is used for finding the total quantity by country for the year  .Hence Quantity keyfigure is added in the Keyfigures and Country is in the Rows and Calendar Year is restricted with Variable in the global filter .There are no other fields and no other restrictions .
      I am still trying to figure out why the warning apprears in the DashBoard. Since this Dashboard report will be used by the Power users and this warning message will be annoying to them .Hence I need to find how to avoid this message.
    Kindly do let me if anyone has faced this and solved earlier.
    Thanks for your time.
    Thanks & Regards,
    Raja

    Hi Nick,
      Thanks for your suggestion and it  worked for me   I  added the 'System message' web item and set the visibility to 'Hidden'  .Now I am not getting any message. Thank you for both.
    Thanks & Regards,
    Raja

Maybe you are looking for