Advice Needed on S60 Smartphone- Plz help...?

Hi everybody,
Plz recommend me a nokia s60 smartphone which should have following things in it:
1: a decent 1.5 inch or above screen with rich resolution
2: at least 2 mega pixel camera with flash + camera in front also
3: mp4 or avi recording
4: memory card with USB port support (no serial data ports)
5: should have bluetooth + infrared n more
6: nice internet data transfer rate with full HTML pages support
7: push to talk facility
8: stereo speakers - 2 preferably
9: fm stereo radio
10: easy and quick to type buttons
11: not too bulky : slide or otherwise
Expecting a positive response.
Oc9ine.

i am not sure about the avi recording but you can consider the above two mentioned or the nokia n73 if you want a low budget phone...
Was this post of some help? Click 'Kudos' star on the right hand side of this post. Your gesture will be highly appreciated!

Similar Messages

Unable to install itunes 8.1.1 need it for iphone plz help

i can download the 8.1.1 intaller but when i install a msg pops up which reads
"the windows installer service could not be accessed this can occur if you are running windows in safe mode or if the windows installer is not currently installed contact your support personel for assistance"
i have tried to download a new installer but it says mine is the newest so i checked out safe mode and i found out how to turn it on but not how to turn safe mode off but it does seem to be off! is there any other things that could be stopping this from installing??? any advivce would be much appreciated thankyou!

Hey there,
Check out this Microsoft Support page with potential solutions to this error by clicking [here|http://support.microsoft.com/kb/319624]. Hope it helps.
B-rock

Wjen i trying to activate my personal file sharing in system 10.4.11 it's not able to start this service so my network computers can't access my computer plz help or advice ??

wjen i trying to activate my personal file sharing in system 10.4.11 it's not able to start this service so my network computers can't access my computer plz help or advice ??

When was the last time you did any of the following?
Restart your computer?
Repaired Permission & restarted your computer?
Run "Repair Disk" from your install DVD?
Please detail all you have done to resolve your issue. Need this information so that the users can avoid the "been there, done that" scenario type responses. This is to avoid repeating the troubleshooting you may have already tried. Thank you.

In the new mail app for OSX v10.7 Lion it seems I can only setup my gmail account as an "imap", when I need to set it up as "pop"... PLZ HELP I NEED MY MAIL TO WORK!!!

In the new mail app for OSX v10.7 Lion it seems I can only setup my gmail account as an "imap", when I need to set it up as "pop"... PLZ HELP I NEED MY MAIL TO WORK!!!

Go to System prefs
Select Mail Contacts and Calendars
Then select Other
Then select "Add a Mail Account and click create
Then go to google for the settings you need:
First here for the settings online at gmail http://tinyurl.com/du3fu
Then here for the setting in mail http://tinyurl.com/38fevm8
These are instructions for Mail 4.0 but all of the necessary settings should be listed.

HT1414 C apple i need to know few things,first of all i shall tell my scenario. I got an iphone 3gs from my uncle in US. I m at india k. well , in that iphone it showing activation screen and trying to activate. not more than that..plz help!

C Apple, i need to know few things,first of all i shall tell my scenario. I got an iphone 3gs from my uncle in US..after long waiting. I m from south india, living at God's country called Kerala k. well , in that iphone it showing activation screen and trying to activate. not more than that..plz help!
means.. in simple words, it is trying to activate and all( searching wifi,, taking few minutes..again searching...if it couldnt find any wifi - telling .. try connect using itunes an all)...well any way. finally I try connect to a wifi network, with full speed...3mbps..from Ravi's internet cafe in downtown.
All after Im getting the below message from that white candy box!( thats all I can use now, because, in my dreams iPhone is something great, that mankind ever seen....but this really disappointed me......im simpling blinking!!(same with itunes too)
""Your iphone could not be activated because the activation server is temporarily unavailable. try connecting your iphone to itunes to activate it, or try again in a couple of minutes.
If this problem persists, contact apple support at apple.com/support""
EVERYDAY .EVERTIME.. I C this message and sleep....no use.....and i use to charge that 'white candy box' to c this message!
I try searching internet and all for solutn...but no one knw about it..but there are...some one me abt method called jailbreaking ..rednw..white snw ..ultrasnw and all...I dnt knw why it is so complicated to troublesht...apple is suppose to be simple and friendly.
C why u manufacturing these stuffz like this, if does'nt serve the any of its purpose ....or useable to any of its features atleast....C i wont be that disapppointed, if u put an option to playbck music or video during activation and all...
If you are responsible for manfacturing such unuseable thing, then its ur responsible to destroy it too.....
anyway now everyone knws that ..I have an apple iphone with me, but that doest make me proud at all...
Finally I have only few questions to ask...
1 will it work with my vodafone sim in kerala?
2 is any way , i can hear any music out frm it?
3 will i become a proud iPhone user?
I am already fedup with asking questions..begging for an solution.....
I hope so you can help to figure it out, without any complications....thank u!

It was not legitimately unlocked by the carrier it was originally locked to. ONLY the carrier it is locked to can authorize unlocking it.
In order to allow it to be used on a different carrier, the phone was hacked or jailbroken. An unauthorized modification was made to the phone. That modification has damaged the phone. You can not get support for it here or from Apple.

I was updating my iphone to ios 8 and it went into recovery mode. i went onto itunes to fix it and it said i needed to update my phone. when i clicked on it it said it would take 500 hrs and kept going on, then it would crash. plz help. :(

yesterday i tried updating to Ios 8. i new there were going to be some problems but i decided to do it. i started the update and less than a half hour into it my phone completely crashed.it went into recovery mode so i connected it to iTunes. i hit restore and update . it gave me and estimated time that kept going up. finally when it got to 800 hours it stopped and said an error occurred. i tried it again and the same error occurred. i am very disappointed in this because i greatly need my phone for school and other important things. i wasn't gonna wait that time anyway. i would like to know if there is anyway i don't have to update, get out of this screen without waiting forever, speed up the time, or get my computer to not crash when it gets to so many hours. (i have windows) plz help me out asap!!!

I have experienced a similar error with the iPhone 4S. The new version of iTunes will not let me restore the phone, it must be updated and nothing appears to be happening. Suffice it to say I am not amused. Apple needs to work this out - I had trouble updating to 8.0.2 as well.

Plz help me[need abap oo]

hi frnds,
i lose abap oo [siemens]materials. so now don't hav any oo material. if any hav abap objects materials [pdf format] pls send the link.... i need it immediately... i need ur help ... plz help me....

Hi this may be of some help.
OOPs ABAP uses Classes and Interfaces which uses Methods and events.
If you have Java skills it is advantage for you.
There are Local classes as well as Global Classes.
Local classes we can work in SE38 straight away.
But mostly it is better to use the Global classes.
Global Classes or Interfaces are to be created in SE24.
SAP already given some predefined classes and Interfaces.
This OOPS concepts very useful for writing BADI's also.
So first create a class in SE 24.
Define attributes, Methods for that class.
Define parameters for that Method.
You can define event handlers also to handle the messages.
After creation in each method write the code.
Methods are similar to ABAP PERFORM -FORM statements.
After the creation of CLass and methods come to SE38 and create the program.
In the program create a object type ref to that class and with the help of that Object call the methods of that Class and display the data.
Example:
REPORT sapmz_hf_alv_grid .
Type pool for icons - used in the toolbar
TYPE-POOLS: icon.
TABLES: zsflight.
To allow the declaration of o_event_receiver before the
lcl_event_receiver class is defined, decale it as deferred in the
start of the program
CLASS lcl_event_receiver DEFINITION DEFERRED.
G L O B A L I N T E R N A L T A B L E S
*DATA: gi_sflight TYPE STANDARD TABLE OF sflight.
To include a traffic light and/or color a line the structure of the
table must include fields for the traffic light and/or the color
TYPES: BEGIN OF st_sflight.
INCLUDE STRUCTURE zsflight.
Field for traffic light
TYPES: traffic_light TYPE c.
Field for line color
types: line_color(4) type c.
TYPES: END OF st_sflight.
TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
DATA: gi_sflight TYPE tt_sflight.
G L O B A L D A T A
DATA: ok_code LIKE sy-ucomm,
Work area for internal table
g_wa_sflight TYPE st_sflight,
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
Declare reference variables to the ALV grid and the container
DATA:
go_grid TYPE REF TO cl_gui_alv_grid,
go_custom_container TYPE REF TO cl_gui_custom_container,
o_event_receiver TYPE REF TO lcl_event_receiver.
DATA:
Work area for screen 200
g_screen200 LIKE zsflight.
Data for storing information about selected rows in the grid
DATA:
Internal table
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
C L A S S E S
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object e_interactive,
handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
Event handler method for event toolbar.
CONSTANTS:
Constants for button type
c_button_normal TYPE i VALUE 0,
c_menu_and_default_button TYPE i VALUE 1,
c_menu TYPE i VALUE 2,
c_separator TYPE i VALUE 3,
c_radio_button TYPE i VALUE 4,
c_checkbox TYPE i VALUE 5,
c_menu_entry TYPE i VALUE 6.
DATA:
ls_toolbar TYPE stb_button.
Append seperator to the normal toolbar
CLEAR ls_toolbar.
MOVE c_separator TO ls_toolbar-butn_type..
APPEND ls_toolbar TO e_object->mt_toolbar.
Append a new button that to the toolbar. Use E_OBJECT of
event toolbar. E_OBJECT is of type CL_ALV_EVENT_TOOLBAR_SET.
This class has one attribute MT_TOOLBAR which is of table type
TTB_BUTTON. The structure is STB_BUTTON
CLEAR ls_toolbar.
MOVE 'CHANGE' TO ls_toolbar-function.
MOVE icon_change TO ls_toolbar-icon.
MOVE 'Change flight' TO ls_toolbar-quickinfo.
MOVE 'Change' TO ls_toolbar-text.
MOVE ' ' TO ls_toolbar-disabled.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
METHOD handle_user_command.
Handle own functions defined in the toolbar
CASE e_ucomm.
WHEN 'CHANGE'.
PERFORM change_flight.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMETHOD.
ENDCLASS.
S T A R T - O F - S E L E C T I O N.
START-OF-SELECTION.
SET SCREEN '100'.
*& Module USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
DATA:
For parameter IS_VARIANT that is sued to set up options for storing
the grid layout as a variant in method set_table_for_first_display
l_layout TYPE disvariant,
Utillity field
l_lines TYPE i.
After returning from screen 200 the line that was selected before
going to screen 200, should be selected again. The table gi_index_rows
was the output table from the GET_SELECTED_ROWS method in form
CHANGE_FLIGHT
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
CALL METHOD go_grid->set_selected_rows
EXPORTING
it_index_rows = gi_index_rows.
CALL METHOD cl_gui_cfw=>flush.
REFRESH gi_index_rows.
ENDIF.
Read data and create objects
IF go_custom_container IS INITIAL.
Read data from datbase table
PERFORM get_data.
Create objects for container and ALV grid
CREATE OBJECT go_custom_container
EXPORTING container_name = 'ALV_CONTAINER'.
CREATE OBJECT go_grid
EXPORTING
i_parent = go_custom_container.
Create object for event_receiver class
and set handlers
CREATE OBJECT o_event_receiver.
SET HANDLER o_event_receiver->handle_user_command FOR go_grid.
SET HANDLER o_event_receiver->handle_toolbar FOR go_grid.
Layout (Variant) for ALV grid
l_layout-report = sy-repid. "Layout fo report
Setup the grid layout using a variable of structure lvc_s_layo
Set grid title
gs_layout-grid_title = 'Flights'.
Selection mode - Single row without buttons
(This is the default mode
gs_layout-sel_mode = 'B'.
Name of the exception field (Traffic light field) and the color
field + set the exception and color field of the table
gs_layout-excp_fname = 'TRAFFIC_LIGHT'.
gs_layout-info_fname = 'LINE_COLOR'.
LOOP AT gi_sflight INTO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
Value of traffic light field
g_wa_sflight-traffic_light = '1'.
Value of color field:
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
g_wa_sflight-line_color = 'C610'.
ELSEIF g_wa_sflight-paymentsum => 100000 AND
g_wa_sflight-paymentsum < 1000000.
g_wa_sflight-traffic_light = '2'.
ELSE.
g_wa_sflight-traffic_light = '3'.
ENDIF.
MODIFY gi_sflight FROM g_wa_sflight.
ENDLOOP.
Grid setup for first display
CALL METHOD go_grid->set_table_for_first_display
EXPORTING i_structure_name = 'SFLIGHT'
is_variant = l_layout
i_save = 'A'
is_layout = gs_layout
CHANGING it_outtab = gi_sflight.
*-- End of grid setup -
Raise event toolbar to show the modified toolbar
CALL METHOD go_grid->set_toolbar_interactive.
Set focus to the grid. This is not necessary in this
example as there is only one control on the screen
CALL METHOD cl_gui_control=>set_focus EXPORTING control = go_grid.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0200 INPUT
MODULE user_command_0200 INPUT.
CASE ok_code.
WHEN 'EXIT200'.
LEAVE TO SCREEN 100.
WHEN'SAVE'.
PERFORM save_changes.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
*& Form get_data
FORM get_data.
Read data from table SFLIGHT
SELECT *
FROM zsflight
INTO TABLE gi_sflight.
ENDFORM. " load_data_into_grid
*& Form change_flight
Reads the contents of the selected row in the grid, ans transfers
the data to screen 200, where it can be changed and saved.
FORM change_flight.
DATA:l_lines TYPE i.
REFRESH gi_index_rows.
CLEAR g_selected_row.
Read index of selected rows
CALL METHOD go_grid->get_selected_rows
IMPORTING
et_index_rows = gi_index_rows.
Check if any row are selected at all. If not
table gi_index_rows will be empty
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
textline1 = 'You must choose a line'.
EXIT.
ENDIF.
Read indexes of selected rows. In this example only one
row can be selected as we are using gs_layout-sel_mode = 'B',
so it is only ncessary to read the first entry in
table gi_index_rows
LOOP AT gi_index_rows INTO g_selected_row.
IF sy-tabix = 1.
READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
ENDIF.
ENDLOOP.
Transfer data from the selected row to screenm 200 and show
screen 200
CLEAR g_screen200.
MOVE-CORRESPONDING g_wa_sflight TO g_screen200.
LEAVE TO SCREEN '200'.
ENDFORM. " change_flight
*& Form save_changes
Changes made in screen 200 are written to the datbase table
zsflight, and to the grid table gi_sflight, and the grid is
updated with method refresh_table_display to display the changes
FORM save_changes.
DATA: l_traffic_light TYPE c.
Update traffic light field
Update database table
MODIFY zsflight FROM g_screen200.
Update grid table , traffic light field and color field.
Note that it is necessary to use structure g_wa_sflight
for the update, as the screen structure does not have a
traffic light field
MOVE-CORRESPONDING g_screen200 TO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
g_wa_sflight-traffic_light = '1'.
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
g_wa_sflight-line_color = 'C610'.
ELSEIF g_wa_sflight-paymentsum => 100000 AND
g_wa_sflight-paymentsum < 1000000.
g_wa_sflight-traffic_light = '2'.
clear g_wa_sflight-line_color.
ELSE.
g_wa_sflight-traffic_light = '3'.
clear g_wa_sflight-line_color.
ENDIF.
MODIFY gi_sflight INDEX g_selected_row-index FROM g_wa_sflight.
Refresh grid
CALL METHOD go_grid->refresh_table_display.
CALL METHOD cl_gui_cfw=>flush.
LEAVE TO SCREEN '100'.
ENDFORM. " save_changes
chk this blog
/people/vijaybabu.dudla/blog/2006/07/21/topofpage-in-alv-using-clguialvgrid
with regards,
Hema SUndara.

HT204382 music files that I'm trying to transfer from my external hard drive!!! i really need help! i am getting very frustrated. plz help me thank you

hi. i am trying to transfer my old pictures and music files from my external drive into my new laptop.and first of all only a coupleof my foldersare coming up.and even those few files/folders wont play ....i am new to mac.i REALLY need help. my old pictures and music are real important to me.plz help me.

IS the external HD from another Mac or a PC?

HT4972 Help! I have erased my iPhone 3GS in error! I have lost everything! I need to sell it , plz tell me what to do to put the basic stuff back in!!

Please help!!! I've erased all content in error! I thought I was resetting to factory settings!! I need to fix this as I've sold it on eBay!! Plz help!!

Sounds like your iPhone was previously hacked/modified/jailbroken and the
update relocked it to the original wireless carrier. If this is the case, only that
wireless carrier can unlock it.
Where did you get this iPhone?
What wireless carrier are you attempting to use it with?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>Carrier?
I have asked the hosts to move this to the iPhone section as you are currently
in the iCloud forum and this is not an iCloud matter.

Plz help i need to build a flash gallery with thumbs

plz help me i need to build a flash gallery with thumbs plz
give me the code or the fla file ........ !

You don't give a lot of information about your set-up but there are a couple ways to do this.
You can run Open Directory on your OS X Server and bind that to your Active Directory forest. This will allow people to authenticate against your OD using their AD credentials. This will work (it's better/easier in 10.5 than 10.4) but will result in Kerberos ticket which you would need to integrate to your site's permissions. You might be able to use Service ACLs to only allow authenticated users to access a certain site or service and that would take care of the authentication and control for you - but would require a certain amount of server manipulation and ODAD interaction. From the tone of your question I'm guessing this is an answer beyond what you were looking for.
Alternately you should be able to build a website that presents a dialogue and uses LDAP against the AD server. Almost all the examples of this are, of course, using MS specific tools and code like C# and .Net. But even to get this working would certainly programming (using PHP, Java or some other language) to handle the request and answer from the server and this will be beyond anything included in CS4. Depending on your resources maybe you could create the whole website except for the authentication and have someone code that for you. But it would need to be someone not from the MS world because they will probably want to use tools that are Windows specific.
Lastly there is the web specific .htaccess method that you could use without programming, but as you anticipate it will require you to manage the file that has the name/password information in it and will not talk to AD for information. This is the easy and local way to do it because it cuts AD out of the picture, but that puts the burden of maintenance on you.
I guess the answer is yes this is possible, but it is not easy or automatic.
Good luck,
=Tod

I keep the itunes encountered a problem and needs to shut down . it was working fine until after i updated to 10.5 can someone plz help

i keep the itunes encountered a problem and needs to shut down . it was working fine until after i updated to 10.5 can someone plz help

I did get a "server busy" message when I loaded quicktime, but I'm not sure if it is related or not since I've been seeing that over the last couple of days, I can't remember if it came before iTunes stopped working or not. That message reads "This action cannot be completed because the other program is busy. Choose 'switch to' to activate the busy program and correct the problem." My options then are to choose switch to or retry. When I press "switch to" my Start menu opens, and nothing appears to happen when I select retry.
that's an odd sort of a message (or series of messages).
hmmmmm. let's try an experiment aimed at working out if there's a program interfering with the QuickTime (which is in turn causing grief with your iTunes).
try a selective startup using MSCONFIG, with just the itunes and QuickTime background processes enabled, as per the following document:
Using MSCONFIG to troubleshoot conflicts in Windows
does QT open without the strange message after the selective startup?
does iTunes launch properly?

Hi, i am badly in need of help. i partitioned my mac hd yesterday and now the boot camp is nt working as i was using win 7 on it. i am using macbook pro 13'' 2011. plz help me. anxiously waiting for response... specially from "Christopher"

hi, i am badly in need of help. i partitioned my mac hd yesterday and now the boot camp is nt working as i was using win 7 on it. i am using macbook pro 13'' 2011. plz help me. anxiously waiting for response... specially from "Christopher murphy"

you can't add or mofidy partition numbers. especially not if and once you have windows installed.
boot from Windows 7 DVD afterwards
but first you have to tell us and Christopher what and how you partitioned your system.
Successful setup of OS X Lion + Data Partition + Bootcamp Win7 Ult
https://discussions.apple.com/thread/3293948
So after many, many hours I think I've finally figured out how to successfully setup Mac OS X Lion on one partition, a seperate data partition, and Windows 7 Ultimate on a Bootcamp partition . Here is a screenshot of my setup on my 13" MacBook Pro
Thread with suggestions on Windows backup methods:
https://discussions.apple.com/thread/3798090
Paragon CampTune
Paragon CampTune is a commercial product that is designed expressly for this task. http://www.paragon-software.com/home/camptune/ It consists of a downloadable ISO that needs to be burned to a disc and booted from in order to resize the partitions costs US$19.95.
Securing Dual-System Configuration
Imaging is still the most affordable and robust way to secure computer data. Unfortunately Mac OS X backs up only HFS+ volumes, leaving Windows with dual-system configurations unsecured. You can permanently lose all of your data unless you have a Windows-compatible backup solution.
Paragon’s CampTune and Paragon’s Drive Copy for Mac can secure the entire dual-system configuration. CampTune creates traditional images of volumes or entire hard disks, Drive Copy can copy them to other disks. In case of an emergency, you can restore the previously created image or copy all your data back to its original state.
GParted Live
GParted Live is similar to CampTune as it is also distributed as a bootable image that needs to be copied to a CD/DVD or USB flash drive. As free and open source software, distributed under the GPL, it will always be available free. Since it has more functions than CampTune, it may be harder for folks who are not as experienced with partitioning hard drives. http://gparted.sourceforge.net/
iPartition
Coriolis Systems' iPartition is a £29.95 ($44.95 US) utility that runs in Mac OS X and allows resizing of all of the relevant partition formats, including HFS+, FAT32, and NTFS. It provides a Mac-oriented user interface that may be easier to manage than some of the free utilities. As it is not capable of resizing the boot disk, it requires a bootable external disk or a boot DVD. (A tool to create a boot DVD is included.)
Paragon Partition Manager
From the makes of CampTune is a commercial tool that is similar in functionality to GParted Live, but has a more polished/friendly user interface than GParted Live. Previously only the US$79.95 Professional version supported all the features required for this, but as of version 11 the US$39.95 Personal version has also been reported to work. http://www.paragon-software.com/home/pm-personal/
Winclone/Disk Utility
Winclone is a free tool for creating and restoring backup images of your Windows partition. One of its key features is that it can restore to a larger partition than the one the image was created from.
NOTE: Winclone has been discontinued, but for now remains available and capable of completing these tasks (including creating and restoring Windows 7 images).
Winclone updated to support Lion Winclone updates and download
Disk Utility can resize HFS+ (Mac OS) partitions, but is currently incapable of resizing NTFS partitions, so you could use it to reduce the size of the HFS+ partition and create a new larger placeholder MS-DOS (FAT) partition
The full process would be:
Backup Windows partition with Winclone.
(if the new Windows partition is smaller than the old one make sure you set the preferences in Winclone to save the image as an uncompressed dmg)
Delete old Windows partition
Resize current Mac Partition
Create new Windows partition as MS-DOS (FAT) in free space after Mac OS partition.
(If the new Windows partition is smaller than the old one an additional step is required: shrink the filesystem on the image by selecting Tools->Shrink Windows (NTFS) Filesystem)
Reboot your computer for the new Windows partition to mount properly (winclone may not restore if you don't reboot)
Restore Winclone partition over new Windows partition
An alternate Winclone based process is described in the External Guides section
Native OS utilities
MR user Kazyua reports that you can use the disk management utilities provided with the current operating systems if you want to do it manually. Windows 7 and OS X both have partition resizing functions built in. In OS X, open Disk Utility and manually shrink the mac HFS+ partition by dragging the lower right corner. Then in windows go to the start menu and type "disk management" into the search box then hit enter. You should get an overview of the drives you have and the individual partitions. Right-clicking on the partition gives an "Extend Volume" option. The Windows NTFS volume should then be extended into the free space you created with Disk Utility. This method has not worked for other users, so try at your own risk.
Resizing under VMWare Fusion
If you are looking to allocate more space to Windows under VMWare please refer to the following thread http://forums.macrumors.com/showthread.php?t=828182
From http://guides.macrumors.com/Extend/Resize_Boot_Camp_Partition
Thread with suggestions on Windows backup methods:
https://discussions.apple.com/thread/3798090

I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!

I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!

Hi
That screen grab helps a lot. There’s a much easier way of doing what you’re doing.
Remove all your tabs and set the text in justified paragraphs.
I’ve typed in dummy text in the example I made below, but after “19.1” put in a space and put your blinking cursor after the space and before the ’N’ of ‘Notices'.
Then hold down the Command key and hit Backspace (on Mac at least - it’s the key between the Inverted commas/ apostrophe key and the return key).
The text will jump into place the way you want it to.
Hope that helps
Paul
PS You can set a tab, instead of using a space, in the description I gave above. So, after 19.1 or 19.2 or 19.185 etc etc insert a tab, then hit the Command Backspace after every paragraph number and they'll all line up exactly together. You'll find that editing text within the paragraphs
after you've set it will be LOADS easier this way.
You can put the tab anywhere you want it to be using 'Command-ShiftT' and putting a 'left align' tab just after the number. Just type the Command Backspace after the paragraph number and it'll work

I have iphone 5 with icloud accont but isn't for me need to remove oredy erase my iphone but while activated it request enter your i cloud account plz help me

i have iphone 5 with icloud accont but isn't for me need to remove oredy erase my iphone but while activated it request enter your i cloud account plz help me

Contact whoever you purchased the phone from. That's called activation lock. There is no way to bypass it without the credentials for the account that was used to lock it.

Compaq presario c795tu sound driver needed...plz help me...

Plz help me ...... i need conexant HD smart audio 221 sound driver.....
Actually i reinstalled the XP and came to know that the sound is not coming...
when i checked it...sound driver was missing some files likes AUDSYS.exe and UIU32A.exe etc.
By mistake, my friend had been uninstalled the sound driver. then the problem has been increased...
2 days back...i went to local compaq shop...they installed some sound driver which is working but at the same time
head phone and speaker both are working continuously...means if u want to listen through head phone... speaker also working with head phone....
sound is coming through both devices.....
Plz help me regarding this....and provide me presario c795tu audio driver.....
This question was solved.
View Solution.

Hi,
Here are the drivers.
Unzip to a folder...use Device Manager.
From Device Manager,right click "Audio Device on High Def Bus",choose Update driver,
No to connect,
Install from a list or specific location,
Select Don't Search, I will choose the driver to install,
For the Hardware Type select 'Show All Devices'
Remove the check from "Show Compatible Hardware" and click on "Have Disk".
Next...browse to the unzipped folder and choose the "WiSVHe5.inf".
Ignore XP when it complains.
Reboot.Hi,
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Advice Needed on S60 Smartphone- Plz help...?

Similar Messages

Maybe you are looking for