Advice needed on sharing/registering logic express with 2 users

Me and my mate, have got into audio production, and i am wondering if we can BOTH register the same logic program.
Is there a specific limit on how many users can be on one single program? Surely logic must allow you at least 2 users, say incase you have a mac at home, and one in a seperate studio.
All replys will be greatly appreciated.
Thanks in advance
Dan
amd athlon xp Windows XP Pro

No Dan,
I'm affraid you can't do that, it's highlly Illegal,
You can't register one licence to two persons,
You can install it on two of Your machines, (not your mate's one)
for the reason that You can only use one at the time.
Otherwise, it will be a paradise, everyone would find software mates
and split the price and I would be on Pro instead of LE! :o)
I believe you can have LE as an academic (if you are one or your mate) for a fraction of the price.
Anyway, welcome to the forum, I wish that you have all the fun with LE and make nice music with it.
Kindly Regards,
Jorge

Similar Messages

Digital outs in Logic Express with 828 or 002 rack

Can someone tell me if it is possible to use the digital ins and outs of either my MOTU 828 or DIgi 002 rack with LE? It's no where as easy as Pro tools or DP!!

Forgive my naivety... when you say "digital outs" are you talking about SPDIF? Does this mean I can't run Logic Express with an interface connected to the SPDIFs on my G5? Only Pro? Or am I off the mark?
Thanks!

I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!?

I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!? It is very frustrating as the main reason i have bought a mac is to use logic! Any help would be great as i am a complete novice when it comes to Macs!

You're probably on OS X Lion?
I had the same problem as you. I used Software Update to update Logic Express to the latest version, and then it ran without any problems.

Logic Express with MBox

Can someone please help.Can I use Logic Express with an MBox and if so how.

Hey Roma,
welcome to the forum!
Assumming you had the drivers installed, (in Logic) go to the audio menu>audio hardware & drivers>Driver (change from built in audio to Digidesign HW (MBox), Relaunch, that's it.
((Click on (say) audio 1 (to select track) Press R to arm it and you shoud now have sound level on metters. Don't forget the I/O in logic is audio 1 = input 1, audio 2 = input 2, audio 3 = input 1, audio 4 = input 2 and so on (by default))
Kiddly regards,
Jorge

Problems Using Logic Express with Alesis Multimix 8

Hi,
Does anybody have any experience of using the Alesis Multimix 8 USB with Logic Express 7.0.1? As far as I can tell the software is set up OK. The problem is that there is an awful amount of noise present on both the input and the output (sounds like inordinatley loud dither). The problem is also present on Garageband and iTunes but not with Cubase LE (bundled in with the Multimix).
I have searched and searched the internet for drivers for the Multimix but with no luck. At the moment I am just using the "core audio" USB codec drivers that are built in as I seem to have no other option.
Does anybody have any suggestions before I go ahead and buy another external audio interface? (got my eye on the new Behringer F-CONTROL AUDIO FCA202)
Rev. G Rock
PS I am running OS X (10.3.9) on a G4 iBook (1.33 GHz, 1.25 GB RAM) and have done all the updates available for Logic Express 7.0(.1)
iBook G4 Mac OS X (10.3.9)

OK I understand it's helpful to others to post solutions should you find them so here goes:
It would seem that the problem is with the built in CODEC used by OS X. You can update using the drivers available at http://www.usb-codec.com
I used the demo version to see if it solved the problem which it did. However you need to buy the software to get rid of the annoying beep every 30 secs on the demo version. well worth it to get my hardware working properly though.
Rev. G Rock

Can I use logic express with my Macbook

I just got a macbook and i was wondering if I can use Logic express or pro on it??

yes!
it of coourse depends what you want to do with it - but yes!
by all acounts logic express and pro will run very well on the new macbooks.
I'm using pro on my old powerbook - just about manage to use it live and it's slow but useable to get ideas down onto and am using an intel imac as my main studio computer with logic pro 7.2.3 - it's essentially the same as a macbook except it doesn't have integrated graphics and it has a faster hard disk which does make a difference. Apart from that i'm sure your new macbook would toast my powerbook in terms of performance.
Be sure to get the intel version of logic (7.2 and above) as an older "ppc" version may run but is not supported and would probably run very slowly.
Enjoy!
Rounik

Logic Express with not Recognise Amplitube 3 as a Plug-in

I cannot get Logic Express 9 to recognise Amplitube 3 as a plug-in. What do I need to do to make get it to use Amplitube. I'm new to Logic Express and I'm enjoying the on-board amp sims, but I really love my Amplitube.

Hopefully you will find this thread of help... In particular the very last post by gtrman...
https://discussions.apple.com/thread/2438700?start=0&tstart=0

Logic Express with Oxygen 25 - no sound

I am trying to use an Oxygen 25 controller with logic express. In Logic I can see that it is receiving a midi signal but I can not get any sound from the midi controller to come out. There is sound from everything else, but not the midi.
I feel like there is an easy answer (or they are not compatible), but a little help would be nice.

Hi,
you have to use the Controller with a software instrument track that has a software instrument selected as "input". A Controller like the Oxygen does not make a sound of it's own, but merely sends MIDI data to Logic, which then uses this data to trigger it's software instruments.
Fox

Logic Express New User Troubleshooting....?

I'm having trouble with hearing the sound using Logic Express 7. I heard there was an article called "David Pye's Troubleshooting Tips for New Users", Does anyone know where I can find it...???

http://discussions.apple.com/thread.jspa?messageID=774725&#774725
The forum search is your friend...
Best, Fred

ADVICE NEEDED Apple TV and Airport Express vs Cable company modem

In process of buying Apple TV and need some advice. I have a cable moodem and am wondering if I should use that for Apple TV or should I also purchase airport express to use with Cable modem. I currently do not have any airplay devices but might in future. Recomendations about setup would be great.

I suppose you could connect the Apple TV to your home network with a LAN cable...then have your PC wired to the same network...this would allow you to download movies, Netflix and YouTube from the internet to the Apple TV and also to play music from iTunes on your PC....but one of the things I really like about my new Apple TV is the interaction with iOS devices...it is great to mirror the desktop from an iPad 2, it is great to show pictures etc. from the same iPad...I think you'd miss a lot if you didn't enable wi-fi...it seems like you could setup a wi-fi access point in your home for a very modest cost, and just connect the downlink from the wi-fi network to the hub of your cable modem...or your ISP might have an integrated wi-fi system you can purchase...when you setup wi-fi on Apple TV, you just need to know the name(SSID) of the wi-fi network and any password you might have..it works great. The instruction book, though tiny, does a pretty good job of explaining stuff

Help/advice Needed! Paid for 2 years with no servi...

I have been with BT for 2 years since we moved into our first home, paying approx £40 a month for phone line and broadband! When we initially signed up we were asked various questions to see what product would be best for us, we told them we wouldn't be using phone line as we use our mobiles and would only use the wifi for childrens iPad! We were told to download BT app and log into wifi using email and password which we have done for 2 years! The wifi has always been very slow Nd hit and miss but we live in middle of no where so thought it was our area! After 2 years we have decided to start using home phone for childrens school purposes! So we bought phone, plugged it in and no dialling tone! Called BT who sent out engineer within a week! When engineer arrived he asked where is our hub? My response being whats a hub? After explaining how we usually connect to wifi he explained that that's not our wifi and a hotspot! So basically been paying for over 2 years never used land line or Internet due no fault of our own! We were never told about a hub or received one? The engineer told me to call and complain so which I did over 3 weeks ago! The advisor says he would fill in a form and pass on to his manager, but sent is a hub out which is charged us for? The hub has came and I still can't get any internet after spending another 2 hours on phone doing various tests they can't get it working and are sending out another engineer and was told could possibly be charged £129 for! As you can imagine I am furious with? I still haven't heard back from anyone and have sent a complaints form in also! Can anyone give me any advice on where I stand as I'm not very good with technology? Thanks

Hi Emmaburke87,
Welcome to the community forum. I'll be able to take a look at the details of your complaint. Please can you send me in your details using the "Contact The Mods" link found in my profile.
Thanks
PaddyB
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Advice Needed: Installing APEX 4.2.1 with SSO 10g

I am running in an environment here where it is mandatory that I run SSO 10g (the old verison 10.1.x.x OAS based). How do I go about enabling SSO in APEX 4.2.1? Can I use the same ssosdk902.zip I used with APEX 3.x.x or do I need a different one? There is no plans to go to upgrade off of our legacy 10g SSO or go to OAM based SSO. I would appreciate any information that can be offered.

Hi David,
yes, you can use the same SDK. You just have to take care to follow the same steps. It's easy to forget to re-create synonyms and do grants after an APEX upgrade.
Regards,
Christian

How to have logical expression with value '*' not wildcard '*'

Hi ,
    I have requirement where i have to filter records based on a field with value EQ '' but strangely it is taking wildcard '' in the production system. In the Dev system it is taken as exact value '' but behaves as a wild card in prod system. Please advice a sure shot change which will work in both the environment as i am on a strict deadline for this. Will a usage of CONSTANT work ? Constant : val   type c value "".
Regards
Tashi

Hi,
Check the bellow code which will help you in using wild card in searcg help.
DATA: ls_selopt         TYPE ddshselopt,
        ls_t006a          LIKE t006a.
TYPES:lv_range          TYPE char45.
CALL FUNCTION 'F4UT_PARAMETER_VALUE_GET'
      EXPORTING
        parameter         = lc_old_mat
      IMPORTING
        value             = lv_dummy
      TABLES
        shlp_tab          = shlp_tab
        record_tab        = record_tab
        selopt_tab        = lt_sel_opt
      CHANGING
        shlp              = shlp
        callcontrol       = callcontrol
      EXCEPTIONS
        parameter_unknown = 1
        OTHERS            = 2.
    IF sy-subrc <> 0.
      EXIT.
    ELSEIF NOT lv_dummy IS INITIAL.
      lv_old_filled = 'X'.
    real backend system ?
      MOVE 'I'          TO ls_old_mat_ranges-sign.
      MOVE 'EQ'         TO ls_old_mat_ranges-option.
      MOVE lv_dummy(10) TO ls_old_mat_ranges-low.
      APPEND ls_old_mat_ranges TO lt_old_mat_ranges.
    ELSEIF NOT lt_sel_opt[] IS INITIAL.
      lv_old_filled = 'X'.
      LOOP AT lt_sel_opt INTO ls_sel_opt.
      no select in case of 'all systems'
        IF ls_sel_opt-low EQ '*'.
          DELETE lt_sel_opt.
        ELSE.
        wildcards
          MOVE-CORRESPONDING ls_sel_opt TO ls_old_mat_ranges.
          APPEND ls_old_mat_ranges TO lt_old_mat_ranges.
        ENDIF.
      ENDLOOP.
    ENDIF.
Regards,
Goutam Kolluru.

Advice needed for update to x-fi with m5

hey chaps! i just got inspire m5300 & using it on my Soundmax (onboard) provided on intel 865gbf, i expected it vl sound good but i vl rate it on avg., no doubt qulaity is awesum but not geting a feel of using creative at my desk. so need an advice, is dis my sound card not up to d mark.. it supports 5. nd running my box well,
if suggest for an upgrade kindly let me knw which one will give that clarity. i heard nd saw x-fi alot, is it worth.. or over creti've web portal i saw a simple 5. surround card will that work for gud quality too..
how costly gona update gona be, pls give a rough idea.
waiting yaa..

Hi Exorcist-devel,
Are you a gamer or more of a music lover?
Some sound cards are geared towards gaming while others are more for music playback, music creation, etc...
I would also recommend contacting support as they are in a better position to advise you.

Hard drive options for Logic Express with a Mac Mini

I'm considering getting a Mac Mini to use for recording video from a medical endoscopic camera. The reasons for choosing a Mac Mini are 1) low cost 2) small size and 3) no fans - blowing dust around an operating theatre can be a risk (therefore even if cost wasn't an issue, the fans would preclude other mac models).
I've been looking at the spec of a Mac Mini - they have 5400 rpm hard drives and only 1 firewire 800 port. I'm using a Canopus ADVC 55 to convert analogue video to DV which connects using Firewire.
Will the built in hard drive be ok, or should I consider replacing it with a 7200 rpm drive, or get an external Firewire drive. PResumably, with only 1 firewire port on the Mac Mini I would need to find either a hard drive with 2 firewire ports to chain devices (which I've heard can be a problem) or perhaps get a firewire hub (similar problem?).
Currently I'm using a MacBook Pro with an internal 7200 rpm drive and this works fine (except when it gets low on hard drive space and I get dropped frames, leading to complete loss of the recording...).

Thanks - I just did a quick search and there are some Firewire 800/400 'bilingual' hubs around at reasonable prices.
I'm tempted to try the Mac Mini server, and perhaps have the 2 drives in a Raid 0 configuration. I could then have it backing up to a Time Capsule overnight (to mitigate the risk of using Raid 0).
Recording to an external drive might be useful though - as it would be a quick way of moving the data to a Mac Pro for compression for archiving. I find moving 10-20GB files over 802.11n to be very time consuming.
I'll certainly bear the dust in mind in terms of the risk to the Mac Mini (I've seen PC's having failed power supplies because the air inlets have been clogged with dust). My main concern however would be the risk of infection due to the fans causing air movement. There is an enclosed space it could be located, not great for cooling though.

Advice needed on sharing/registering logic express with 2 users

Similar Messages

Maybe you are looking for