Advice needed please

Hello there,
New to the forum and cannot find help anywhere else.
I have lost the calculator software and cannot reinstall/retrieve it.
Also, any software I try to install doesn't work - HotSync stops and says the application wasn't responding to HotSync.
Any advice would be much appreciated - thank you
Post relates to: Palm Z22

1. It's as good, if not better.
2. According to Apple, the same material was used on the 5th Gen iPods as the Nano. You can draw your own conclusions on scratching issues.
3. Yes.
4. Yes.
5. No, you need to upgrade to iTunes 6 in order to get video functionality. You won't need to reinstall playlists (as you put it). Playlists will remain intact after the upgrade from iTunes 4 to iTunes 6.

Similar Messages

I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!

I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!

Hi
That screen grab helps a lot. There’s a much easier way of doing what you’re doing.
Remove all your tabs and set the text in justified paragraphs.
I’ve typed in dummy text in the example I made below, but after “19.1” put in a space and put your blinking cursor after the space and before the ’N’ of ‘Notices'.
Then hold down the Command key and hit Backspace (on Mac at least - it’s the key between the Inverted commas/ apostrophe key and the return key).
The text will jump into place the way you want it to.
Hope that helps
Paul
PS You can set a tab, instead of using a space, in the description I gave above. So, after 19.1 or 19.2 or 19.185 etc etc insert a tab, then hit the Command Backspace after every paragraph number and they'll all line up exactly together. You'll find that editing text within the paragraphs
after you've set it will be LOADS easier this way.
You can put the tab anywhere you want it to be using 'Command-ShiftT' and putting a 'left align' tab just after the number. Just type the Command Backspace after the paragraph number and it'll work

Advice needed please regarding a new phone line

Hi all,
I would appriciate any advice please. I will start from the beginning i placed my order with BT on 26 july calls and broadband they said they had to send an enginner out and the earliest date was 16th August which has been i waited in betwwen 12 and 5 and no enginner arrived i then rang bt i was so angry. After lots of phonecalls from them yestarday they are coming tommorrow.
I need advice on the socket i have one in my flat but what i dont have is a wire that goes accross the wall i am not sure if that lead is in the socket i have not touched the socket since i moved in 2 years ago i do not want to touch it as me and leads do not get on lol!! would the enginner put the cable in if there isnt one???
Thanks in advance

'I need advice on the socket i have one in my flat but what i dont have is a wire that goes accross the wall i am not sure if that lead is in the socket i have not touched the socket since i moved in 2 years ago i do not want to touch it as me and leads do not get on lol!! would the enginner put the cable in if there isnt one???'
Have you ever had a working land line in the flat, is the flat a new(ish) build? It is possible the lead in, that is the wire that connects the socket to the outside Block Terminal or Distripution Point is behind the wall.
Most new builds will have Openreach or the developer put the wiring in before they put the wall in to hide it so there isn't un-sightly wires everywhere. My house is a new build, a mid town house and the master socket is at the back of the house in the living room but the connection point outside is on the front of the house, there is no visible wire so I assume it goes up the wall, across the hall ceiling into the living room then down the wall again to where it is. I know it won't go under the floor because I visted the house a few times during the build process and the floor was put in before the phone socket was.
I suppose its nice you can't see the wire but I am unsure what they will do if it ever needs replacing as I don't know if its feeds through duct type pipeing where they can pull it through?
Anyway to answer your question if it needs a cable then yes the engineer will put one on.

Connection Advice Needed Please

Hi All
I moved house over a week ago and asked to transfer my BT Services over (but thats a whole other shambolic issue). At my previous house, my HH5 was connected to the Master Phone Socket and I had Infinity 2 Unlimited. However, the new house already has FTTP installed - with an ONT box and back up battery box on the wall.
I've not been able to get any advice from BT, but can someone tell me if I just plug my devices straight into the wall mounted box or do I plug my old HH5 into the ONT box and use my old wireless SSID as usual? Or do I still just plug my HH5 into the main phone socket?
I did not ask for the FTTP super fast service, so they should be activating my old 76MBps Infinity 2 service.
Many thanks
Liz

Hi EWINMK17
If you have FTTP and already have the ONT (Openreach optical network box) and backup battery installed, then all you need to do is connect your Home Hub 5 via the WAN port (may be coloured red) on the back of the Home Hub 5 to the LAN1/Port1 port on the ONT with an ethernet cable.
Are there any lights light up on the ONT?
Here's some information about the lights on the ONT box: http://bt.custhelp.com/app/answers/detail/a_id/36945/~/fibre-home-phone-service%3A-lights-on-the-ope...
Have a look at page 11 on the user manual on how to connect your HH5 to the ONT here http://btsupport.custhelp.com/ci/fattach/get/3309418/1381227399/redirect/1
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Russian and Chinese Flash movies - general advice needed please

Hi all -
This is a plea for some general 'jumping off' advice. I am an experienced Flash developer but now have a request to convert an existing xml-fed movie into both Russian and Chinese. I speak neither of these languages so we have had the content of the movie translated by a professional translation service.
The movie contains both png/jpgs with embedded text - created in Fireworks and also (for the bulk of the content) external xml files. I still need to be able to develop in an English environment - so purchasing a full version of Flash/Fireworks in Russian/Chinese would be folly. How should I go about this? If it is a matter of fonts - where should I get them from? And are there any considerations to be met with regards the xml files? Basically, I would really appreciate some general advice on this subject as it is completely new ground for me.
Much obliged,
Hugh

Thank you. Having the airports all in proximity was the key and, of course, I eventually found the same advice in an apple help file. I set the new AExtreme up as WDS main with an ethernet disk for backups and music. An old AExtreme as WDS remote serves the Cube by ethernet and a usb printer. An AExpress as WDS remote serves one stereo. The other AExpress is WDS relay serving another stereo and helping the network reach the office where the last old AExtreme is WDS remote with another USB printer. The 3 mac laptops are happy. I have yet to try any PCs.

Oracle "guru"'s advice needed please :-)

I think I need an Oracle "guru" for this situation. 2 issues:
1) Installed Oracle on a Standalone desktop with Win 2K Professional. Database Config. Assistant created Database - 9i Version of Oracle Standard Version. I get 2 errors: Ora 12541 and ora 12154 - all relating to TNS No Listener or failed to resolve service name. Now, I'm quite the newbie but I can't understand why I would need to configure this stuff on a standalone machine. It also asks me for ID and password and when I put the correct one in, that's when I get the No Listener error, however, I did indeed configure one. My Tsnnames.ora and listener.ora do have the database in them and everything in those files seems correct. The DB name is SteveTe and the PC (or host I guess is "Tower"). How can I configure or fix this?
2) I used Migration Workbench to "import" an Access DB into Oracle which was successful BUT I also expected to see the database in Enterprise Manager and want to use SQL + to do queries with it. How can I do this? Currently I cannot do it and the DB doesn't show in Enterprise manager. Furthermore, if I attach it manually, it still asks me for a ID and Password and it doesn't have one so how do I get around this?
If someone can help, please send me some detailed instructions to get me out of the Oracle "quicksand" that I'm in. Thanks,
Steve

I would suggest using XSL to define your presentation layer. This will be much faster than accessing tables. It also allows you to change your presentation on-the-fly with different XSL files.
Storing the XML in the database is a good idea. Especially in 9i which will have native XML support with the use of a new datatype called XMLType. It uses CLOB's under the covers, but will give you native access to your XML data.

HTTPS error in JDK.1.4. Advice needed please.

Hello,
I am using JDK 1.4. with JSSE 1.2.
I have created a test server certificate and would like to transfer data over HTTPS using Tomcat 3.2.4
However,when compiling the 'HttpsHandler' class with jdk1.4 I am getting an error which I was not getting with jdk 1.2.2.
The Error while compiling is in jdk 1.4 :
HttpsHandler.java:250: reference to X509TrustManager is ambiguous, both class com.sun.net .ssl.X509TrustManager in com.sun.net.ssl and class javax.net.ssl.X509TrustManager in javax.net.ssl match
static class RelaxedX509TrustManager implements X509TrustManager
^
HttpsHandler.java:103: reference to HttpsURLConnection is ambiguous, both class com.sun.net.ssl.HttpsURLConnection in com.sun.net.ssl and class javax.net.ssl.HttpsURLConnection in javax.net.ssl match
HttpsURLConnection hpCon=null;
^
HttpsHandler.java:139: reference to KeyManager is ambiguous, both class com.sun.net.ssl.KeyManager in com.sun.net.ssl and class javax.net.ssl.KeyManager in javax.net.ssl match
KeyManager[] km = null;
^
In my HTTPSHandler Class, I have added the code to trick the server
into accepting the server certificate which works fine with jdk1.2
and JSSE 1.02.
My HttpsHandler code is as follows:
public class HttpsHandler
public static String ec(String sMess)
String response=null;
try {
Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
System.setProperty("java.protocol.handler.pkgs","com.sun.net.ssl.internal.www.protocol");
URL url;
String uri = "https://" + sURL + ":8443/AHTTPS_USERPWD/servlet/Recieve_Https_Data";
url = new URL(uri);
HttpsURLConnection hpCon=null;
try {
KeyManager[] km = null;
TrustManager[] tm = {new RelaxedX509TrustManager()};
SSLContext sslContext = SSLContext.getInstance("SSL");
sslContext.init(null, tm, new java.security.SecureRandom());
SSLSocketFactory sslSF = sslContext.getSocketFactory();
hpCon = (HttpsURLConnection)url.openConnection();
hpCon.setSSLSocketFactory(sslSF);
}catch(Exception e){}
static class RelaxedX509TrustManager implements X509TrustManager
public boolean checkClientTrusted(java.security.cert.X509Certificate[] chain)
return true;
public boolean isServerTrusted(java.security.cert.X509Certificate[] chain){
return true;
public boolean isClientTrusted(java.security.cert.X509Certificate[] chain){
return true;
public java.security.cert.X509Certificate[] getAcceptedIssuers() {
return null;
public void checkClientTrusted(java.security.cert.X509Certificate[] chain, String authType) {}
public void checkServerTrusted(java.security.cert.X509Certificate[] chain, String authType) {}
Please can any one advice or tell me why isnt the code compiling with
jdk1.4
A response is much appreciated...
[email protected]

I think your problem is with the fact that the JSSE is now part of the JDK 1.4. It sounds like you still have the JSSE jars in your classpath.
When the JSSE was integrated with 1.4, the package names changed from com.sun.whatever to javax.whatever.
At this point you want to get rid of any old JSSE jar files and replace the references in your code that refer to com.sun.whatever to javax.whatever.
Cheers
Brian

Photoshop Elements 8 advice needed please

Hello!
I received PSE8 for Christmas and have Never used one of these programs before! I noticed it does not come with a manual of any sort and did find a few books on amazon and was wondering if any of you "experienced" users could recommend one to me!
Was looking at either the "Dummies" book for PSE8 or the "Missing Manual" series.
Any advice is appreciated! I learn quick but need good clean explanations!
Thanks!
Carrie

I used PE The Missing Manual by Barbara Brundage when I started out with an earlier version of the program. The chapters are well written and illustrated. It is a quality product and should serve you well. Barbara moderates this board and is generous with her advice. I have no commercial connection with the author or with the publisher.

Help and advice needed please

Hi all, had a moving home 12 days ago, my ip profile is 56.56 but I only get a average of 25mb throughput on Ethernet. I also wanted a data extension but the subby made a right mess of my wall and the data ext kills my bb when connected, so I have had to completely remove it and buy a long white Ethernet lead. Any advice please guys? Ps my bras is 58mbps
Thanks

The subcontractor left the bt socket off the wall, holes in my fresh painted skirting board as he didn't want to get his drill so tried to mount on the skirting, also tried to mount the modem on skirting! . He said do I want to mount it all!? I said yes due to the mess he was making of my new house. I'm field staff for a rival company so the mounting was no problem. But what he did do was use telco wire from x2 terminals from the I plate I think it's called to data socket. When ethernet plugged into socket my bb drops? Hence I had to take it away. When he left I was getting approx 40 meg throughput, this has dropped to 25 ish since. My brass rate is still 56.56 dropped from 58mbps. I have made good his damage so won't raise a claim. But if anyone could offer advice, that would be great. I would also like to communicate with a moderator if poss? Thanks

Advice needed :please help

Hi,
We have an application that has 2 database tables that hold presentation information as:
Table :- screens_info
Contents of a record :- what is the background color , title , link colors etc. for a screen in the application
Table :- tables_info
Contents of a record :- what is the format of a column of a table that needs to be displayed such as heading , data-type , textbox/listbox etc. , needs to be presented in presentable version , width
I was thinking for a java solution and use XML instead of database presentation tables. There will be multiple XSL and XML for this presentation info.
I need to justify this approach to my colleagues.
Here are some points:
FOR -->
1. Database is not a good way for storing presentation info. whereas XML is
2. Later on we can change it easily if required as well as talk more effectively with other applications ( which is our need in near future )
3. For each screen load and reload , we need not access database presentation tables. Improves performance
Against -->
1. It's fine for saying not to store the data in database , but ultimately we have to access the XML and the files etc.
2. I am planning to use XSQL servlet from Oracle that basically will handle the query execution part and return a proper output as I am going to specify with a stylesheet
This poses a danger in case tomorrow we plan to deal with some other database than Oracle. So instead of that I can go for java beans and XMl parsers.
I am not able to exactly specify the advantages of storing presentation info. in XML.
Please guide me and correct if I am wrong. I badly need help on this decision.
Thanks
-kg

Hi Steve,
That's a good point.
Related question is as I am going to use XSQL servlet, if we shift tomorrow some other database than oracle , XSQL servlet is of no use I guess and I should go for parsing and all by myself. Isn't it?
But can you tell me the major advantages of using XML in my case?
Thanks-
Kirti

K9A2 plat hardware, CPU monitoring-advice needed please

Hi,
It seems that the MSI's "dualcore center" does not accurately displays CPU temp, normally it shows CPU temp. at lower than room temp.
Also sometimes dual-core-center freeze/hangup other programs as well.
With that being said, I am looking for advice/recommendation as to what program to use to monitor CPU temps; something that would show in the task bar, show current temp., and does not hog up lot of resources.
thanks

Oh yes... got to pay more attention to the spell checker.
Ironic.... I come here for technical advice and I get a lesson in spelling. thanks Frankenputer. Furthermore ironic the fact is that I claim that I am not obsessed, yet I keep coming back here too read /learn more. May be it is not an obsession but an addiction. I am just a newbie here, some of you have post count above 1K. Hee-heeee..
Fredric, you mention bios is the most accurate, but you can't access it during a game play or application use.
The only time I see bios info is when I boot. (yes boot no need to correct.... boot= as in pressing the power "ON" button to begin PC operation) it would not be a good monitoring tool.
Hans
There is room , I am just not satisfied the way it is mounted. A huge, heavy heatsink hanging out to the side which is supported by the MOBO, now you hang another object(fan) on the heatsink; just like hanging weight on the end of a lever. Then you spin up the fan and let it vibrate, these cheap fans not balanced as they should be. An air tunnel or duct system would be a much better way to bring airflow to a heat sink, better than hanging a fan on it.
Normal way of mounting works of course. I am just testing to see if there is a better way. I am using a fan, just mounting it elsewhere.
Products engineered certain way because size, cost, or compatibility issues. Not necessarily to be most efficient.
My corsair TX750 PSU a good example. A fan is mounted inside; size and compability issue.
So the engineers put a 140 mm fan on the bottom(inside), blocked half of its airflow with a plastic shield so air is moved to the back, though and out.
I removed the fan and the airflow blocking plastic piece, mounted fan on outside of PSU. Airflow has nearly doubled. I am sure it runs cooler too. A slight mod to the case was necessary. Now I sleep better at night (kiddding)
This PSU (unmodified) in an Antec P182 case barely moved any air through it. I ended up selling the the antec 182.

Some general advice needed please

Until today my network was DSL, AE802.11g with ethernet external drive and usb printer, a cube and printer on a remote AE802.11g and an express for the stereo. I had 3 laptops connecting except from one room that I want to move a printer to and use as an office. So I bought some more kit to extend the network.
A new AE802.11n and another express arrived today. Because the house is big with thick walls I think I need at least one airport set up as a relay rather than remote. After reading the discussions I managed to get the new AE set up and connected to the DSL. but, I seldom get more than 1 or 2 AE or expresses show up in airport utility making it hard to set them to join the network which seems to keep disappearing. The most remote AE is near one of the expresses but does not see the network.
Any suggestions for the optimal settings for each device? And what order should I set them up in?

Thank you. Having the airports all in proximity was the key and, of course, I eventually found the same advice in an apple help file. I set the new AExtreme up as WDS main with an ethernet disk for backups and music. An old AExtreme as WDS remote serves the Cube by ethernet and a usb printer. An AExpress as WDS remote serves one stereo. The other AExpress is WDS relay serving another stereo and helping the network reach the office where the last old AExtreme is WDS remote with another USB printer. The 3 mac laptops are happy. I have yet to try any PCs.

Output quality advice needed please.

Hi,
I'm new to the forum and new to the world of video editing and I've got a basic question that I'm hoping someone could help me with.
I'm shooting 1920 x 1080 HD (H.264) footage with a Canon 7D DSLR camera. I've just purchased my first HDTV and Blu-ray player and I'm obviously dying to see what the quality is like from my camera's video.
I quickly put a few clips together and selected the burn to DVD option. I selected PAL-Widescreen and unticked the Quality box, I put the quality slider at Highest Quality. The DVD played fine on my Blu-ray player and I assumed I was watching my video footage in high definition at the maximum quality.
However, someone has just informed me that it's not high definition at all, because I've selected the output as PAL-Widescreen it's actually standard definition footage 720 X 576. My TV states the footage is 1080p though.
Could someone clarify please. Am I watching the footage in HD, and if not, what settings do I need to apply to see the best quality?
Any help would be very much appreciated, thank you.

Also, some BD players have chips to up-rez SD material to as close to HD, as possible. Those chips do a really good job, so that a SD DVD will be better on them, than on an older plain DVD player. They will not be BD quality, but will be improved. The amount of improvement will depend on the exact player and the up-rezzing chip(s) that it has. My SD DVD's look better on my higher-end BD players, hooked to HD TV's, than they do on my plain-old DVD players (use those to test) and older TV's. I find the end result amazing, but still short of full BD quality. Those up-rezzing chips are amazing, at least to me.
Good luck,
Hunt
PS - for background and full specs. on DVD and BD, this ARTICLE has some great links. It's basically a FAQ listing from Jim Taylor's multi-1000 page book, DVD Demystified - the DVD/BD "bible."

XPS 2720 - advice needed please

Hi Guys
I recently bought an XPS one 2720 - 4440s version with msata 32gb 1tb 7200 hard drive, I think that is what I have, want to ditch that and just buy either 256gb or 512gb ssd and have os on that so I get the best from this AIO, is that possible to do, can I just do a clean install on new ssd
my questions are?
is msata better than sata 6gb/s - do I buy an msata ssd and plug that in to the motherboard
read lots of post online saying sata 6gb/s is better?
I have been on dell site and used the facility auto detect and it is unable to detect my machine?
I also took the service tag off the back of the AIO and it is not recognised, is this a problem?
I would if possible like to install windows 7 on to this AIO, can this be done,
any advice or help is much appreciated, probably have lots more questions but this will do for now, wish everyone a great weekend
best
Paul

When the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Hard drive advice needed please

Hi Guys
I'll shortly be taking the plunge on a shiny new MacBook Pro, after reading various threads I'm still unsure about HD size and RPM.
Ideally I'd like the 200GB drive, but in use just how much slower would it be? I need to access tiff, video and music files, and up to now use an external drive which occasionally chokes on video and music on my trusty 800MHz PowerBook
I use photoshop and various other graphics applications, as well as video editing........So will I find the HD rpm an issue? is it better to settle for the 160GB?
Your advice would be appreciated
ED
G4 Quicksilver + G4 PowerBook + AirPort Extreme Mac OS X (10.4.4) 60GB iPod video and several pet LaCie hard drives

The 200GB 4,200RPM drive is faster than most if not all 4,200RPM drives as it has a greater number of platters than most 4,200RPM drives.
Click the link below to see how it faired in some tests. It was near the bottom in terms of perfomance compared to faster RPM drives but against other 4,200RPM drives it did well.
http://tomshardware.co.uk/2006/10/12/fujitsusmhv2200btuk/page3.html

Advice needed please

Similar Messages

Maybe you are looking for