Advice needed with lining up lines between parent and subreport

I have a report where the main report includes a box and 6 interior vertical lines. The box and lines start in a group header and end in a group footer. Details has several sections, and one of the sections includes a subreport (suppressed when there is no data) that crosses the interior lines. This report is used by multiple customers on a variety of printers.
Inside the subreport, there are two details sections. One detail section has a background color defined.
When the report is generated and the subreport contains data, the subreport section with the background color obscures the line defined on the main report.
We have tried to work around this behavior by adding matching lines in the detail section of the subreport, but we have been unable to get the lines within the subreport to nicely align with the lines in the main report. We'll think we get it fixed up for one printer, but then they are off on another printer.
We have turned off the background and removed the lines. This gives us a perfectly straight line, but the users really want the subreport to have alternating colors.
What other options do I have?

Non-recoverable read errors per bits read:
Value line CS: 1 in 10**14 (1.065% annualized failure rate)
See http://www.seagate.com/em/en/internal-hard-drives/enterprise-hard-drives/hdd/enterprise-va lue-hdd/
Constellation ES2: 1 in 10**15 (0.73% annualized failure rate)
See http://www.seagate.com/em/en/internal-hard-drives/enterprise-hard-drives/hdd/enterprise-ca pacity-3-5-hdd/
For testing whether everything works as it should, try the Passmark benchmark and Prime95 stress-test.

Similar Messages

Help needed with contact/groups synching between phone and laptop via cloud

I installed OS X 10.7.5 and my software is up to date on both my I-phone and my MacBook. I have the cloud enabled. But now, when I try to access my contact groups on my I-phone, I just get the list of groups with checks beside them; I can't select a group and have those contacts displayed as they were
prior to installing the updates. I have cloud enabled and can see the groups displated when I go to the cloud.com site. But how do I get my iphone to display contacts by groups again? If I click on "Done" with all contacts and all groups checked, the display goes out of the groups category and back to the
list of all contacts. Do I need to change something in settings? At present, when USB-connected to the Mac and in I-tunes and looking at "information"
for my Iphone, I don't have synch contacts selected. I thought synching was happening via the cloud. I didn't make any change in that I-tunes synch setting
compared with before installing the new operating system and updating the rest of my software. If I need to check "synch contacts," do I check synch all
contacts or the box for synching groups. I want to have all my contacts and all group organization that's on my computer duplicated on my phone and would like to have synching happen without having to physically connect the phone to my computer. Help would be appreciated!

http://www.apple.com/business/theater/#managegroupsofcontacts
Download the "Groups" app from the app store. It is free.

I need help syncing my contacts between Outlook and iPhone using iTunes. I followed the steps given and ended up with just email addresses showing in my contacts even though I have phone numbers and snail mail in my Outlook Contacts. Using Windows 7

I need help syncing my contacts between Outlook and iPhone using iTunes. I used the knowldge document and set it up to transfer my Outlook contacts to the iphone using itunes.
In contacts on the iphone I only see the email addresses.
Yet in Outlook I have email, snail mail and phone numbers.
I followed the knowledge document from iphone.
I did it once, didn't work so deleted all the contacts from the phone and tried again. Same result. I have a PC using Windows 7 64 bit.

You can't access an Exchange account via ActiveSync with the Address Book and iCal on your Mac.
You can access a MM account with Outlook on your PC at work and keep your MM email account server stored mailboxes synced between your PC at work, your iPhone, and the MM "cloud". Not sure about syncing MM contact info and calendar events with Outlook at the same time with an Exchange account.
This will not provide for syncing your Exchange account contact info and calendar events with the Addresss Book and iCal on your Mac because the accounts are separate.
You can access an Exchange account and a MM account at the same time with the iPhone's mail client, and sync contact info and calendar events over the air with both accounts at the same time. You can view combined contact info or separately for each account, and the same for calendar events.

%variance between parent and child hierarchy

Experts,
How to calculate a percentage variance between parent and child hierarchy.
Ex: parent is 80 and child is 20 so I need a %variance between 80 and 20.
Thanks in advance.

Hi Nikki
Create structure and restrict parent hierarchy with one node and child hierarchy with another node and create formula node to calculate the percentage variance between two nodes.assign points if helpfful.
Regards
Murali.

Hi, I need to import contacts from windows outlook to MAC outlook. I need the field mapping document between windows and mac outlook.

Hi, I need to import contacts from windows outlook to MAC outlook. I need the field mapping document between windows and mac outlook.

Then I suggest you post your question the Microsoft Mac forums since it's their products you're having trouble with
http://answers.microsoft.com/en-us/mac

Continuous square wave signal with time high pulses between 1 and 2 ms

Hi,
I need to generate a wave signal with time high pulses between 1 and 2 ms. I am trying to use the pwm on a digital output (Inhibit) but nothing happens.
I am using a PCI7330 and UMI 7764.
My labview version is 8.2.
Does someone have an example how to generate it?
Best regards

Hi,
I need to generate a wave signal with time high pulses between 1 and 2 ms. I am trying to use the pwm on a digital output (Inhibit) but nothing happens.
I am using a PCI7330 and UMI 7764.
My labview version is 8.2.
Does someone have an example how to generate it?
Best regards

Help/advice needed with layout vs screen res

so i'm working on a website which is looking like this:
the css looks like this:
@charset "UTF-8";
body {
margin: 0;
padding: 0;
text-align: left;
color: #000000;
font-family: "Courier New", Courier, monospace;
font-size: 12px;
background-color: #FFF;
.twoColFixLtHdr #container {
width: 780px;
background: #FFFFFF;
margin:0 auto;
text-align: left;
.twoColFixLtHdr #header {
margin: 0;
background: #FFFFFF;
padding: 0 0px 0 0px;
.twoColFixLtHdr #header h1 {
margin: 0;
padding: 0px 0;
.twoColFixLtHdr #sidebar1 {
float: left;
width: 334px;
background: #FFFFFF;
padding: 0px;
height: 480px;
.twoColFixLtHdr #mainContent {
margin: 0 0 0 334px;
padding: 0 7px;
.twoColFixLtHdr #footer {
background:#FFFFFF;
width: 250px;
padding-top: 0;
padding-right: 10px;
padding-bottom: 0;
padding-left: 0px;
.twoColFixLtHdr #footer p {
margin: 0;
padding: 10px 0;
.fltrt {
float: right;
margin-left: 8px;
.fltlft {
.clearfloat {
clear:both;
    height:0;
    font-size: 1px;
    line-height: 0px;
a:link {
font-family: "Courier New", Courier, monospace;
font-size: 12px;
color: #000;
text-decoration: none;
margin: 0px;
padding: 0px;
a:visited {
font-family: "Courier New", Courier, monospace;
font-size: 12px;
color: #000;
text-decoration: none;
margin: 0px;
padding: 0px;
a:hover {
font-family: "Courier New", Courier, monospace;
font-size: 12px;
color: #F00;
margin: 0px;
padding: 0px;
problem is, I don't want viewers to have to vertical scroll on any of the pages, I want the left hand address to always be visible at the bottom of the screen/page and I want the last line of text on in the right bar to line up with the bottom line of the address on the left. I know this isn't the easiest thing to control (due to browser compatibility) but i'm seeking advise for the best compromise/solution.
At the moment, i'm staying safe with a 800 x 600 px page. but to attempt to squeeze the content on the right into a space less than 600px high makes the text too small to read. Was thinking of going up to 1024 x 768 px but am worried that this will lead to vertical and horizontal scrolls.
I am currently using a fixed layout. I have looked into experimenting with elastic and liquid layouts but, and here's the real bind, I want the text content in the right hand bar to line up with the images in the navigation bar!! Am I right in thinking that with relative formats the images don't change it's just the text?

Abe Lincoln said, "you can please all of the people some of the time and some of the people all of the time but you can't please all of the people all of the time." He should have been a web designer.
To achieve the pixel perfect precision you're after, you'll need to build your pages entirely with images. Seriously, you can't control where things line up if the end user's settings are not exactly like your own. So don't go there.
Identify your target audience. Desktop/laptops mostly use 1024 - 1280 wide displays.
Google labs - Browser Size
http://browsersize.googlelabs.com/
Excessive horizontal scrolling to see a page is bad practice but vertical scrollbars are perfectly acceptable, and expected by site visitors. You're not doing anybody any favors by making your pages a fixed height. Depending on which toolbars people have opened in their browsers, you may find that 90% of your site visitors are seeing scrollbars anyway.
I want the left hand address to always be visible at the bottom of the screen/page
Use a fixed division. See Sticky Demos below.
http://alt-web.com/DEMOS/CSS2-Sticky-Text.shtml
http://alt-web.com/DEMOS/CSS2-Sticky-Footer.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

Database Firewall in-line between clients and database not working

I’m trying to configure a Standalone Database Firewall in-line between the clients and the protected database so it can block some statements. I’ve followed the Installation Guide and the Administration Guide, but can’t get it working. I’ve configured one Enforcement Point with one Protected Database.
I’ve configured Database Firewall with three Ethernet cards:
eth0 is used for Management (IP. 192.168.1.81)
eth1 and eth2 are associated with Bridged interface br0
The protected database is listening in 172.16.40.3:1521.
The clients are in subnet 192.168.1.x.
I’ve configured the Traffic Source br0 with the IP 172.16.40.2 and is enabled as the Traffic Source in the Enforcement Point.
In the configuration file appliance.conf corresponding to the Enforcement Point, I’ve seen the parameter PROXYPORT=1534, so I understand the clients should connect to this port in Database Firewall in order to access the protected database. Is this assumption correct? Is the configuration I’ve done correct? Are there any additional configuration steps that should be made? Is there any documentation about this configuration files?
Thanks,
Pablo

For in-line blocking mode to work out of the box it is necessary that DB Client's IPs (as they are seen in DBFW), br0 and DB IP are all on the same subnet. If this is not the case you would need to fiddle with routing on the DBFW manually which you are discouraged to do because it's unlikely to be persistent, work correctly after upgrades etc... DBFW is not intended to be a router although it can be made to perform this function. In general I would advise you to stay within the supported configuration and just make sure you network infrastructure is ready for DBFW deployment. IE make sure all these IPs are on the same subnet

Need to remove the space between Menu and the Inner screen

Hi
I am using forms 10G.
In my screen there is some space is coming in between menu and the inner screen and also same in the left side as well .
So can any one tell me which parameter I need to change so that the inner screen should display just below to the menu and same for the left side as well ?

Hi
Yes , If I change that then it is woring fine .
But my question is :- I have 10 forms in server , and in 2 forms I have changed some functionalty then I have FTP it to server .
Now all the forms are coming with some spaces between menu and inner screen . This is what I am little confused .

Horizontal separator line between masthead and tool area

hi all
we have customized the portal masthead with our own background image and all.
however the masthead looks fine in IE but in Mozilla it puts a white horizontal line between the masthead and tool area and since our tool area background is not white it looks wierd.
any ideas how i can fix that.
thanks

Rather than use one of the selection tools, try selecting the object with a mask. With the mask you can hide by painting with a black brush, reveal (and correct) with a white brush. I use PSEv.8, so I have to hijack the mask from an adjustment layer, but your version of the program has a mask buit in.
Here is a stock photo of a brick wall for demonstration
http://www.pixentral.com/show.php?picture=1bPkncRl9f24RslkWKdP0NyaYIt9N1
Try this:
Open you picture file
Duplicate the background layer
Convert the background copy layer to black/white
Apply the mask. Left click on the mask
Paint with a black brush where you want to reveal the color. If you go too far, correct with a white brush

How to differentiate between Parent and Child in IBASE?

Hi. I am working on enhancing a BAPI :BAPI_GOODSMVT_CREATE by calling the following function module IBPP_CREATE_IBASE at its exit.
The BAPI is being called from an SAP ME system and will be passing MATNR and Serial Number of Parent and Child materials to create the IBASE in ECC system. I am confused as to how to differentiate between whether a object is Parent or a Child when the BAPI: BAPI_GOODSMVT_CREATE is called.

if you have NULL valued fields. If
you do a compare and one or both are NULL, then the result is always NULL,
never true or false. Even comparing two fields which are both NULL will
give NULL as result, not true! Or if you have something like "select
sum(field) from ..." and one or more are NULL, then the result will be
NULL. Use always "if field is NULL ..." for NULL checking and for safety
maybe something like "select sum( IsNull(field,0) ) from ...". Check the
function ISNULL() in the manual.

Drawing small, short curves in Photoshop draws straight line between start and end points

I recently installed Windows 8 Professional, Photoshop and the latest Wacom Bamboo tablet drivers and have been experiencing this issue. I've turned off windows flicks and ink. This only happens in Photoshop with the brush tool and I can't seem to find a setting that this corresponds to.
Basically, when I draw small, short curves (particularly letters like 'c' and 'h'), when I lift up my pen, Photoshop automatically connects the end and start points together with a straight line ('c' almost becomes 'o' or 'a'). I'm not holding the shift or any modifier keys. I've tried googling this issue, but I have no idea how to phrase it properly to get any results.
Here's an image of what I'm talking about (the top was drawn with the pencil tool, the bottom with the brush tool which demonstrates the issue. I've highlighted the start and end points with red dots):
ANy ideas? :/

Is caps lock on?

Trouble with WPA in WDS between AE and WRT54G

Hi folks, I've have WDS with my AEBS as a remote base station and a Linksys WRT54G as the main base station. I've be running smoothly with 128 bit WEP encryption for about 6 months, so last weekend I tried upgrading the network to WPA personal .
As soon as I go to WPA the AEBS stops talking to the WRT54G. My G4 powerbook can get an get an IP address directly from the WRT54G (when it's in range) so I'm confident the WPA password is correct. Other than changing the wireless security settings I left the AEBS configuration the same as was working for WEP.
I'm running Airport Admin 4.2 and I've tried both firmware 5.6 and 5.5.1 -- same problem in each case. No connection between AEBS and WRT54G.
I had hoped the AEBS would send and error messages to the system console, but so far I have found no useful diagnostic to debug this problem.
Anyone out there get WPA encryption working for a wireless distribution system between AEBS and WRT54G ?
Thanks,
David

Thanks for the reply Henry.
Hmm... I'm running WRT54G firmware version: v4.20.6, May. 26, 2005.
The SSID's are the same (WEP still works) and personal WPA in the WRT54G is set up using a pre-shared key and TKIP algorithm.
And yet still with DHCP turned on I see that my AEBS is generating "local" IP addresses 256.xxx.xxx.xxx rather than getting an address from the range served by the WRT54G. Since this same configuration work using 128 bit WEP I'm assuming the issue is that the AEBS and WRT54G aren't talking properly.
Do you have a pointer to the previous discussion that suggested WPA on an Linksys AEBS WDS is possible? ... maybe I can contact the author directly.
Thanks again,
David

Needs to know the difference between 4500s and 6500s

i would like to referesh my company's GO and with 7613 router and has 2 6509E with sup720 core. it has a 4 MDF 6509E with sup720 also. now about IDF's i am confuse what i have to use. 4500s or 6500s. the main thinking is we would like to upgrade our desktop from 100M to 1G. so i have to think about the uplink between IDF and MDF.what is suitable for me in this case.
thanks.

This is a very broad question which can't be covered in a single post.
My first suggestion is getting to know everything about each model.
Start by going to http://www.cisco.com/en/US/products/hw/switches/index.html
and click on each product family.
Second suggestion is giving your Cisco Sales rep a call, he will come onsite and show you how you can maximize your network environment and what product matches your criteria better.

Need to syncronize the Regions between ERP and CRM

Hi MW gurus,
I didn't find a adapter object to synchronize the 'Regions' between ERP and CRM. The regions are stored to the table T005S in ERP and the same table exists in CRM too.
Will any one of you adivce on how to sync. these two tables using a replication object?
Thanks,
Raj

Dear Friends,
Start initial load of object "DNL_CUST_BASIS5"
Refer:
http://www.scribd.com/doc/33952988/Download-Country-Region-V-T005S-From-R3-to-CRM-2007-06Jun2010
Thanks & Regards,
Rajagopal
Chennai - INDIA

Advice needed with lining up lines between parent and subreport

Similar Messages

Maybe you are looking for