Advice on exporting PPCS3 HDV Project to file for WD TV player

I would like to maintain HD quality through the Export process to create a file that will be played on a Western Digital TV HD Media Player. I have tried a multiple of export settings without success. My goal is to play back using the WD TV player with the file stored on a USB drive...file size is not an issue.
I capture the HDV footage from a Canon HV30 camcorder into PremProCS3
I use the Project Settings preset = HDV, HDV 1080i30 (60i)
I have stabbed around with Export, Movie... as well as with the Adobe Media Encoder and can't find the magic
When I capture/edit in iMovie09 on a MacBookPro, I can easily export to a .m4v which plays back in great HD quality on my 46" TV via the WD TV player. But I can't seem to find the right preset or custom setting within Premiere Pro to get the job done. I greatly prefer the PP editing environment and want to stick with it.
The attached jpg file is a scan from the WD TV User Manual...supported video formats.
Thanks, in advance.
- Mike -
HP Desktop E6750 Core 2 Duo, 2 Gb, dual internal SATA drives, GeForce 8500GT, 30" LCD monitor, Vista Home Premium, Adobe Premiere Pro CS3

Hey, I'm glad I found you guys. This problem has been messing up my workflow for over a year. Maybe you can help:
I'm shooting HDV with Sony HD1000, capturing with HDV split, editing in Premiere. (So far, so good) Problem is, exporting from premiere (HDV 60i project) produces "squashed" and letter-boxed video, and my graphics and titles are "mis-aligned" with the video. It's like premiere scales down my video files, letter-boxes them, but leaves graphics untouched, which of course throws everything off. My only work around is to edit in an NTSC project, and scale down every single video clip myself, which yields lots of rendering. I thought I solved the problem, by importing the entire premiere project into after effects. Export worked great, no loss of quality, but after effects doesn't recognize premiere time-remapping, titles or wipe transitions (and has issues with .m2t audio)!
I've tried every form of exporting from an hdv project (adobe media encoder, straight to encore). ALWAYS squashes and letter-boxes the video files, while leaving the graphics/titles as is (now appearing larger than they did in the program monitor and less crisp.)
Any help would be greatly appreciated. I love premiere for standard dv, I just can't get around this obstacle with HDV...

Similar Messages

[svn:fx-trunk] 8056: More updated project properties files for the sparkTest project.

Revision: 8056
Author:   [email protected]
Date:     2009-06-22 12:13:58 -0700 (Mon, 22 Jun 2009)
Log Message:
More updated project properties files for the sparkTest project.
Modified Paths:
    flex/sdk/trunk/development/eclipse/flex/sparkTest/.actionScriptProperties
    flex/sdk/trunk/development/eclipse/flex/sparkTest/.project

Thats good news.

Linux installtion file for Creative MediaSource Player & Audio Stream Recorder under GPL licen

I have Sound Blaster Audigy 2 sound card are where any Linux installtion file for Creative MediaSource Player & Audio Stream Recorder under GPL licens ?

I don't think so. Creative's product CD installation seems to support Windows OS only.

Is there a way to export an HDV project out to tape (FX1) after Export?

I know I can import HDV footage from the FX1 into FCP5, perform edits and then "Print to Tape" (FX1), but is there a particular format I need to export to, to be able to created a file for import into a new Project for "Print to Tape"?
In other words how do I export an edited HDV File back to tape frm within FCP5?

I import footage from 2 diff tapes (Cam Angles) of a Cooking show taping.
I edited the clips together and added titling
I then exported the Project out (Current Settings) to a single file
I open that file in After Effects to add Motion Graphics
I export that back out in the HDV format
Now I want to export that file to tape by importing into FCP5 HDV project and doing a "Print to Tape" command. But when I do this I get serious frame drop outs.
I hope that made my situation a little clearer.

PROBLEM Compressing FCP PROJECT into file for DVDPRO

**this is my information...**
I'm EXPORTING a FCP project which is 45 minutes in length. I EXPORT it to COMPRESSOR. COMPRESSOR opens and shows the FILE in up LEFT box where I drag Presets. It gives me the PROJECT NAME but in the little picture box it just shows the FCP ICON. I know when I EXPORT a QT movie of a FCP project, a frame of the project appears in the little box where I drag the presets. This time it doesn't. So I don't know if that's an issue. I'm using DVD preset "DVD: Best Quality 90 minutes". It begins to compress the FCP file which takes roughly 2 hours. I check and it says it's "successful". BUT when I open DVDPRO and import the project to burn there is only ONE FILE not TWO FILES which would be the AUDIO and the VIDEO file. so DVDPRO does not recognize this and it won't burn. What do I do? THANKS for you help. Andy

Try exporting the sequence as a self-contained file using "current settings". This should result in one file with all the quality of what was on the timeline. Make sure this is in a folder located on your scratch (non-system) drive.
Then, open up Compressor, drag in the just created file, apply the "DVD best 90 minutes" preset making sure both the m2v and ac3 compressor actions are included and set the output directory to "Source".
Let it run.
Do you have .m2v and .ac3 files located in the same folder as the original self contained .mov file when complete?
x

Exporting R3 tables into Flat Files for BPC

Dear BPC experts,
I understand currently the way for BPC to extract data from R3 is via flat files. I have the following queries:
1) What exactly are the T codes and steps required to export R3 tables into flat files (without going through the OpenHub in BI7)? Can this process be automated?
2) Is Data Manager of BPC equivalent to SSIS (Integration Services) of SQL Server?
Please advise. Thanks!!
SJ

Hi Soong Jeng,
I would take a look at the existing BI Extractors for the answer to Q1, I am working on finishing up a HTG regarding this. Look for it very soon.
Here is the code to dump out data from a BI Extractor directly from ERP.
You need dev permissions in your ERP system and access to an app server folder. ...Good Luck
*& Report Z_EXTRACTOR_TO_FILE                                         *
report z_extractor_to_file                     .
type-pools:
rsaot.
parameters:
p_osrce type roosource-oltpsource,
p_filnm type rlgrap-filename,
p_maxsz type rsiodynp4-maxsize default 100,
p_maxfc type rsiodynp4-calls default 10,
p_updmd type rsiodynp4-updmode default 'F'.
data:
l_lines_read type sy-tabix,
ls_select type rsselect,
lt_select type table of rsselect,
ls_field type rsfieldsel,
lt_field type table of rsfieldsel,
l_quiet type rois-genflag value 'X',
l_readonly type rsiodynp4-readonly value 'X',
l_desc_type type char1 value 'M',
lr_data type ref to data,
lt_oltpsource type rsaot_s_osource,
l_req_no type rsiodynp4-requnr,
l_debugmode type rsiodynp4-debugmode,
l_genmode type rois-genflag,
l_columns type i,
l_temp_char type char40,
l_filename    like rlgrap-filename,
wa_x030l      like x030l,
tb_dfies      type standard table of dfies,
wa_dfies      type dfies,
begin of tb_flditab occurs 0,
*   field description
    fldname(40) type c,
end of tb_flditab,
ls_flditab like line of tb_flditab,
l_file type string.
field-symbols:
<lt_data> type standard table,
<ls_data> type any,
<ls_field> type any.
call function 'RSA1_SINGLE_OLTPSOURCE_GET'
exporting
    i_oltpsource   = p_osrce
importing
    e_s_oltpsource = lt_oltpsource
exceptions
    no_authority   = 1
    not_exist      = 2
    inconsistent   = 3
    others         = 4.
if sy-subrc <> 0.
* ERROR
endif.
create data lr_data type standard table of (lt_oltpsource-exstruct).
assign lr_data->* to <lt_data>.
call function 'RSFH_GET_DATA_SIMPLE'
exporting
    i_requnr                     = l_req_no
    i_osource                    = p_osrce
    i_maxsize                    = p_maxsz
    i_maxfetch                   = p_maxfc
    i_updmode                    = p_updmd
    i_debugmode                  = l_debugmode
    i_abapmemory                 = l_genmode
    i_quiet                      = l_quiet
    i_read_only                  = l_readonly
importing
    e_lines_read                 = l_lines_read
tables
    i_t_select                   = lt_select
    i_t_field                    = lt_field
    e_t_data                     = <lt_data>
exceptions
    generation_error             = 1
    interface_table_error        = 2
    metadata_error               = 3
    error_passed_to_mess_handler = 4
    no_authority                 = 5
    others                       = 6.
* get table/structure field info
call function 'GET_FIELDTAB'
exporting
    langu               = sy-langu
    only                = space
    tabname             = lt_oltpsource-exstruct
    withtext            = 'X'
importing
    header              = wa_x030l
tables
    fieldtab            = tb_dfies
exceptions
    internal_error      = 01
    no_texts_found      = 02
    table_has_no_fields = 03
    table_not_activ     = 04.
* check result
case sy-subrc.
when 0.
*      copy fieldnames
    loop at tb_dfies into wa_dfies.
      case l_desc_type.
        when 'F'.
          tb_flditab-fldname = wa_dfies-fieldname.
        when 'S'.
          tb_flditab-fldname = wa_dfies-scrtext_s.
        when 'M'.
          tb_flditab-fldname = wa_dfies-scrtext_m.
        when 'L'.
          tb_flditab-fldname = wa_dfies-scrtext_l.
        when others.
*         use fieldname
          tb_flditab-fldname = wa_dfies-fieldname.
      endcase.
      append tb_flditab.
*        clear variables
      clear: wa_dfies.
    endloop.
when others.
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-subrc raising error_get_dictionary_info.
endcase.
describe table tb_flditab lines l_columns.
" MOVE DATA TO THE APPLICATION SERVER
open dataset p_filnm for output in text mode encoding utf-8
with windows linefeed.
data i type i.
loop at <lt_data> assigning <ls_data>.
loop at tb_flditab into ls_flditab.
    i = sy-tabix.
    assign component i of structure <ls_data> to <ls_field>.
    l_temp_char = <ls_field>.
    if i eq 1.
      l_file = l_temp_char.
    else.
      concatenate l_file ',' l_temp_char into l_file.
    endif.
endloop.
transfer l_file to p_filnm.
clear l_file.
endloop.
close dataset p_filnm.
Cheers,
Scott
Edited by: Jeffrey Holdeman on May 25, 2010 4:44 PM
Added markup to improve readability
Edited by: Jeffrey Holdeman on May 25, 2010 4:47 PM

Copying files for windows mwdia player to itunes.

I have Itunes set to add music to the library when played. It does cds and it also adds the to Itunes, but I cant get the files in windows media player to go to itunes. any ideas.
ty ericka

iTunes will not accept Window Media player tracks that are protected. If you imported them off your own CDs, did you check the option to apply protection to them? If so, your only choice is to re-rip those CDs.
Patrick

Exporting the Browse Sequence XML file for Use in Another Project

When I generate a browse sequence based on the TOC using zero for the book level, instead of getting A, A1, A2, B, B1, B2, I get A, B, A1, A2, B1, B2. The TOC runs through all 1st level items first, cycles back through all 2nd level item, then 3rd level, etc.
My workaround was to auto-create the browse sequence at a 0 level and then manually manipulate it to output according to how my readers would actually read my online book (ie A Aa A1 A1a A1b A2 A2a A2b B B1 etc etc).
Now that I have my browse sequence in the correct order for this project, I do not want to repeat these steps every time I create a new version of my OLH for the same guide after some minor updates have been made to the FM source.
There is a file named whbrs.xml inside the output folder and it contains the browse sequence order I specified during my workaround steps.
Is it possible to export this file to another location for use in another project referencing the same guide?
This methodology is much preferred as I am working at an enterprise level with multiple documents (some numbering in the hundreds of pages) and do not want to have to manually use my workaround for each project I update over the next few years.

Hi Kristopher
You probably wouldn't want to use that particular file as it's an output file. You would likely have better luck using the ProjectName.BRS file as that one should be a source file.
However, keep in mind that whether (or how well) this will work will entirely depend on having the recipient project using the same identical structure and identical file names.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

FCP Project - Collect Files for Export?

I have a FCP 7 project which is to be sent to someone to use. I don't want them getting all the footage that has not been used - just all the clips on the timeline. They are all individual clips pretty much shot on a 5D MKII. Is there any way that I can collect/send just the used clips on the sequence without exporting a single quicktime file, or having to collect them all manually?

More...
For Media Manager to work with only the footage used, your clips must have Reel Names assigned to them.
This is a unique identifier for the tape or card that your clips were taken from.
It can be added when you bring the footage in -example:
Or added in the Reel column of the Browser afterwards. You don't need Reel Names for graphics and still images or items such as Motion projects.
If your footage does not have a Reel Name, FCP assumes it came from a source which is not recapturable (a live camera feed is one possible scenario) and will save all of it even if you only used a few seconds.

How do I export an HD project into SD for a replication house

This is totally baffling me. I shot on a canon 7d at 24p 1920x1080.
Project done and we're sending to discmakers tomorrow morning. Was sent today and they said they don't have the time to downconvert the footage and that for them to author the disc I need to send them a quicktime file that is NOT HD.. they stressed HAS TO BE SD.. LIKE A DVD.
I asked "what codec would you like.. they had no answer.. just kept saying SD quicktime.. WTH... someone help. Thanks
PS.. I know this question has been asked before.. most have. I have been searching online all day and no legitimate answers. Hope someone ewith the knowledge sees this as 8:00 will be here fast
Thanks in advance for being so helpful

What is it going to be replicated as -- a DVD?
If so, does your replication plant intend to do the compression and DVD authoring too? How are you going to make sure they get that part right?
When I have done jobs that are going to replication, I author the DVD in DVD Studio Pro with its menus, languages and subtitles as required by the client. That way we know the product will be presented exactly how they want it to be. I also provide label and cover artwork.
The replication folks then get a DLT (covered in the DVD SP manual) or a disc image on a USB drive or as a downloadable file. Even a burned disc will do if the client doesn't need region coding and copy protection.

How can I export or convert to AVI file for use on PC?

I know I did this back in Jan 2009 but can't remember the process to get an AVI file that retains the sound. I thought I exported a SWF and then somehow converted it to an AVI.
*The file:*
*Retains sound, builds and movement.*
*Automatically advances, using "control p" to pause (did not retain the click-to-advance feature).*
I've been reviewing third party software but they seem to all state that the won't retain the sound/builds etc.
Any ideas?
Thanks!

The simplest way is to export as QT and then open the QT using Quick Time Player. If you've got pro you can export as .avi.
There are videos on youtube showing you how to upgrade to QT Pro for free...

Use a panoramic photo flash file in indesign and export it to a swf file for flipbook

hi,
i haven a 360° panoramic flash file.
when i put this file in indesign and make an export to pdf i can see my panoramic photo.
my problem:
i want to export this file to swf to use it as a flipbook.
but now, my panoramic flash file doesn`t work.
is this possible?
thanks
sascha

Hi, I have the same issue??
Even when exporting as an interactive pdf.
My problem is that I am trying to figure out how to export my swf embedded file into an interactive pdf.
I have created an interactive presentation with buttons, effects etc. After which I exported to swf so that all the effects work.
But when placing the swf file back into indesign and exporting again as an interactive pdf it doesn't work at all, all I get is a white screen. (I need a pdf for clients basically, they dont want any swf or flash files.)
Even though after placing the swf file, in the media window I ticked play on page load as well as chose a cover image for the swf file. Still just a white screen when exporting.
To repeat, I need to know how to convert my swf file into an interactive pdf.
Any pointers please would be great I have some swf presentations I need to change into pdf as soon as possible or before tomorrow to be exact before our monthly meeting with clients.
Please help

Reorganize/Rearrange old Project/Media files for fresh start: Newbie 101

I’m just getting seriously again into FCP learning curve, know that organization is vital, and have set Settings/Preferences correctly for fresh start. I say “fresh” because awhile back I started but was not properly organized and was then interrupted (HD went belly up) before getting far other than working on a single project. ALL of those various files now sit in a FCP Media folder within another folder (thus at a second level) full of recovered files from the earlier crashed and meanwhile replaced external hard disk. My question is how do I regroup/divide/move this material so that it’s properly awaiting further work from the new FCP Projects folder on my local disk and the new FCP Media folder on one of my my externals. At present, to repeat and perhaps to clarify, EVERYTHING of this old material now sits within the single FCP Media folder on the second level of one of my externals. I could, of course, just trash everything and avoid the present quandary, but I’d rather keep it but place everything properly for the next time around when I can work with it correctly. I imagine some or all of the work done earlier may have been OK, though improperly placed for workflow. Thanks for any guidance. I’m hesitant because I don’t want to make any further mistakes as I learn and start again. I’m sure this is a simple situation for those who know what they’re doing.

Sorry. Of course you're right. Think I should resend, rewrite?
Still need some guidance on this simple problem.
Esplanader is really Frank Pierson, handmedown from Grand Canyon hiking high also awhile back, but shortly to be continued.
Thanks. Frank

Am I able to easily convert a m4v video file purchased from itunes to a AMV file for a MP3 player that is not an ipod?

My wife an I each have iphones and ipods, however, my children have some non apple mp3 players. I've purchased some tv shows via the itunes store that are in the .m4v video format. The kids mp3 players only supports AMV video files. Is there a way to easily convert the videos I purchased into the AMV video format so that I can load them onto the kids mp3 players?

You can do this in iMovie 11.
Drag your DV clip or clips into a new iMovie project.
Then use the Share menu:
SHARE/EXPORT USING QUICKTIME
In the dialog box choose Export: Sound to AIFF
You could do the same thing in MPEG Streamclip or Garageband, but using iMovie is the easiest.

Encoding iMovie files for Windows Media Player

iMovie 11 / 9.0
Mac OS 10.6.8
I edit audio/video in iMovie (currently the only program I have) and need to output for streaming on the internet. Most of our subscribers are using older versions of Windows Media Player and as I understand won't be able to play MP4. I couldn't play the MP4 using Windows Media Player 9.0, "invalid format" error.
What software could I use to convert MP4 to a format for streaming on the internet that our subscribers play using WMP? Should I save the file out of iMovie in a different format to convert?
I have Adobe Media Encoder 4.2.0.006 but my options are h.264 or flash, got error messages when I tried to "Edit Export Settings".
Thanks

The easiest way is to upload video to YouTube and embed videos on your site from there. This way you don't have to worry about which version of Windows, which version of Internet Exlorere, etc.
Another way, ask your users to install QuickTime For Windows. Then export normally,
Another way, get one of the paid versions of Flip4Mac, and you can convert files to wmv using QuickTime Pro or MPEG Streamclip or Compressor.

Advice on exporting PPCS3 HDV Project to file for WD TV player

Similar Messages

Maybe you are looking for