Advice on heat and multiple iBooks.

Hi everyone,
Have a question that I need a bit of expert advice with. We have 20 G4 ibooks that we use in our little school, and we want to stack them on a trolley/tray to make it easier to move around.
My question relates to heat while on charge. If I stack say 5 of the one atop the other and place them all on charge over night or over the weekend, will that damage them in any way?
Thanks for the help,
James

Hi James
I don't see where that would be a problem. Certainly, having 20 iBooks plugged into multiple sockets requires adequate protection in the circuitry, especially to guard against spikes and surges. The heat factor ought not to be an issue, although I suggest not leaving the trolley in an overheated area, or one lacking ventilation.

Similar Messages

  • Parked MM invoice and multiple account assignments (table RBCO) ?

    Hi.
    Could someone please explain how the table RBCO works for parked MM invoice and multiple account assignments.
    What I have observed in this table are:
    1. Every position (table RSEG)  in the invoice can have several lines (table RBCO) with account assignment.
    2, If there is only one record for a position, the key in the table RBCO starts with 0002, field RBCO-COBL_NR (???)
    3. IF I add one more line to the psoition, the first line CHANGES the key in table RBCO from 0002 to 0001 and the second line gets RBCO-COBL_NR = 0002
    4. The third line gets 0003.
    5. If i delete line 1-2, the remaining one line gets a new key feild RBCO-COBL_NR = 0002.
    The reason for understanding how this works is that i need to make a Z-table storing the history of changes done to records in table RBCO (..don’t ask why...)
    Lest say, I make a change for in an invoice for one of the positions, how do I compare the values in the itab, YDRSEG[]-CO[]- with the lines in table RBCO ?
    And whats the logic for the key in table RBCO?
    Please advice, Tom

    -

  • Planning for  product using multiple bom and multiple recipe involving SOP

    Hi friends,
    The problem. Currently we have maintained single BOM and single recipe (The BOM and Recipe used for MRP) for long term planning run. The FMCG sector of Client requested to have multiple BOMs and multiple recipes in the long term planning run. I.e. The planning is done quarterly and they wanted to use different BOMs and Different recipes for each quarter. But since the existing system has configured to use a single BOM and a single recipe we have a problem to use the long term planning run with the current setups.The problem we have is in this ‘001’ planning scenario.
    appreciate if you can help me how to accommodate multiple BOMs and recepis in the long term planning run.
    thanks and regards
    om

    HI Mr. Ready,
    We create PIR though a submit Job and in this case how to mention the production version while creating PIRs . Also if I am creating PIR through MD61 how to record the version.
    Please advice.
    Thanks and Regards,
    Om

  • Integrtion Scenario using BPM with two sender and multiple receiver

    integrtion Scenario using BPM with two sender and multiple receiver
    How many Application Components are required?

    Hi Vinod,
    1) In integration repository you can have one or many software components it depends on your landscape orchestration
    2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
    also each connection between systems and bpm must have receiver determination and so on.
    Advice: Please treat BPM as a separate system.
    best,
    Wojciech

  • My iphone 5, with iOS 7.0.2, is heating and consuming the battery very fast when 3G is on, even when I'm not using it. Any solution?

    My iphone 5, with iOS 7.0.2, is heating and consuming the battery very fast when 3G is on, even when I'm not using it. Any solution?

    iOS 7 has many multiple tasks. You can save battery life to some extent by few steps. First go to location services and bettr 'Off' them which are not needed. (Ex. Notes.. Reminders.. Etc). Also you can off few apps in 'get notifications' centre. Also usage of 3g by any mobile consumes much battery life. Better to connect any Wi-fi

  • Gifting Multiple iBooks to One Person

    How can I gift multiple iBooks to one person without doing multiple transactions? I'm trying to do this from iBooks in Maverick. Thanks! Dave Numme

    Select one or more messages from the viewer list window, then return focus to the current message composition window and go under Edit on the menubar and select "Append selected messages" or use keystroke combination ⌥⌘i. You can also, with the message being composed in active focus, go to the menubar item "View" and select "Customize Toolbar". Drag the "Append" icon to the toolbar to provide this functionality as a point-and-click functionality. Or you can use BDAqua's method. They all work. BDAqua's method, I think, provides a slightly better delineation between the individual appended messages.

  • Single DB Engine and multiple DB Instances approach

    Hi Tech Arch gurus,
    Need some advice from all of you. We are currently planning to install SAP  training systems to latest versions.
    We are getting recommendations to goahead with Dedicated host for Oracle Installation where we have Single DB Engine and multiple DB Instances for all different 7 SAP Servers (ECC6, CRM7, BI/NW7.3, SOLMAN7.01, SRM7, EP/NW7.3, PI7.1).
    Certain things that need to be clarified before we go ahead with this:
    1.     How complex/simple is this approach ?
    2.     If there are some issues noticed in the future (Performance issues etc) in this landscape , how much effort will be required to migrate out a DB instance for an SAP product to another machine. We would be having both ABAP and Java stack for our systems.
    3.     We would later plan for adding some more systems into the landscape like SAP MDM, SAP CE, SAP BPC etc. If we add all these systems with a single DB engine, would there be performance issues etc. (We are operating under assumption that underlying hardware of the DB engine will be powerful enough)
    Can you please provide some expert guidance on this approach?
    Your response would be much appreciated.
    Thanks,
    MD

    As a consultant I never dared to do different from what SAP says in guides or notes, at least when it comes to PRD systems.
    For QA and Test Systems, discussions might be needed with the customer, depending on how important these systems are,
    and for sandboxes I already did some stuff, that will even scare some Oracle guys
    As Stefan says, the technical setup is not that complicate at all.
    But I never had to fight for a support call in a non-supported Environment, so I can't say.
    I always decided to be on the safe side.
    If you have your Oracle License directly from Oracle you might disscuss such special support issues with these guys.
    The problem is: If you get a call, and the first level support guy from SAP spots the non-supported environment, it MIGHT be possible that you need to escalate and may be pay for the support, but I suppose they will not let your system die
    May be some of the SAP moderator guys can throw a comment in on this.
    Volker

  • Multiple rows and multiple cols inone report

    Hi
    All
    I have a req where i need to build a report with multiple rows and multiple columns
    .... .......................  2009 jan ,        2009 feb ,      2009 march ,   2009 april...........................
    ............................ dim3 mem1 ,    dim3 mem1 ,  dim3 mem1,     dim3 mem1..........................
    dim1 mem1
    dim2 mem1
    calc value
    dim1 mem2
    dim2 mem1
    calc value
    dim1 mem3
    dim2 mem1
    calc value
    please advice if i can use the colkey range and rowkeyranges for this type of expansion and how?
    thanks
    Edited by: bpc_now on Oct 21, 2010 6:40 AM

    Hi,
    If you need multiple dimensions, then the first thing is to specify EVDRE("mXn")
    where m = number of dimensions in column
    n = number of dimensions in the row.
    If the EVDRE has already been built and you wnat to change it, then you need to change the rowkeyrange and colkeyrange. And accordingly, you should have 4 expansions - 2 for rows and 2 for columns.
    Hope it helps.

  • Heat and noise?

    About a year ago, I had a MacBook (which I didn't keep for a reason I won't go into) and it was very hot and the fan was always on. Are this year's MacBooks any better in those respects? Last year's was so hot I couldn't use it on my lap. I'd like to replace my second Mac, an iBook G4, but I'm hesitant about buying a MacBook because of the heat and noise issues.
    Thanks for any comments,
    Kirk

    Because of the MB's compact nature (and this is true of all Mac notebooks to my knowledge), they do tend to get pretty hot when you start running more processor-heavy apps - this is the sacrifice for all the added bulk of exhaust fans on a lot of PC notebooks.
    My MacBook is about 1.5 years old (1st-gen), and I never had a problem with the fans being ALWAYS on. I would assume that that was an isolated issue with that computer...it definitely shouldn't be that way.
    As for using it on the lap, this isn't a good idea anyway. As the MacBook User's Guide will tell you, the computer is meant to be used on a flat surface. The thin rubber pads on each corner of the machine are designed to elevate the computer enough to allow air flow underneath adequate for cooling the machine no matter what - when you use it on your lap (or on a pillow or bed), the bottom case is insulated and air flow is minimal. Not only can this be uncomfortable on your lap, but it's also bad for the internal components.

  • I have one apple ID and multiple family members share this with their devices.  How do we keep pics and messages separate?

    I have one apple ID and multiple family members share this with their individual devices.  How do we keep pics and messages separate for each device?

    For messages
    MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime
    For other issue:
    How to use multiple iPods, iPads, or iPhones with one computer
    What is the best way to manage multiple...: Apple Support Communities

  • HP Pavilion dv4-2170us - more heat and lound sound

    Not sure whats happening with my laptop HP Pavilion dv4-2170us windows 7 home premium...
    More heating and loud sound / noise.

    Please update the latest BIOS for your notebook from the support and driver download page on hp.com.
    Also go through the following document which will help you reduce the heat and Fan noise.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01007591&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
    Hope this helps!
    Although I am an HP Employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

  • New 13" Macbook Pro trying to connect to a Panasonic VIERA TC-L42U30 as second monitor. I've used multiple hdmi-thunderbolt/mini displayport adapters and multiple hdmi cables and still no success. The Macbook does not sense the second monitor (TV). Help?!

    I've been a Mac since 2008, so I know my way around the system pretty well. This issue, however, has me stumped. I had an iMac until now and only now am I experiencing some difficulty with my new MacBook Pro. The model I have is the newest 13" Macbook Pro model and I'm trying to connect a Panasonic VIERA TC-L42U30 42" HDTV as a second monitor via the Thunderbolt port.
    It worked the first two times and hasn't worked since, after 10-15 attempts with different configurations, turning things on n off, restarting the mac, unplugging the cables, adapters, TV, resetting the P RAM, etc... I've used multiple hdmi-thunderbolt/mini displayport adapters and multiple hdmi cables and still no success. No matter what I do, the Macbook does not sense the TV as a second monitor anymore.
    I took the MacBook Pro to the Apple Store, and their "genius" there had it working fine with a DVI connection to a regular monitor. The Panasonic TV I have has HDMI connections and one VGA connection which does not support HD, but no DVI option. I want an HD connection to mirror or extend my MacBook Pro screen. At the Apple Store, they didn't have a Thunderbolt/Mini DisplayPort to HDMI adapter, so he could not try that out for me.
    Anyone else have this configuration or another similar one with a Panasonic HDTV?
    Ideas? Suggestions? Anything?! Help!!
    P.S. I'm running Mountain Lion, if that wasn't already obvious. Everything is up to date in my App Store as well.
    Thanks!

    Hi There,
    I have had the exact same issue but with a projector.
    The issue lies with Mountian Lion 10.8.2.
    I tried many a combination with no luck to get HDMI working.
    Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
    Bought my macbook home and voila, now displaying through my projector.
    There is a small graphics update after 10.8.1 which seems to be the cause.
    Hope this helps.
    Thanks.

  • Hello,  I have iMac from Oct, 2010 and have OS 10.6.7 and multiple users.  Mail icon was accidently removed along with program.  Mail 4.4 is on other users but when I reloaded software my user got Mail 4.3. Mail 4.3 did not work with latest OS. Ideas?Matt

    Hello,  I have iMac Itel i3, from Oct, 2010 and have OS 10.6.7 and multiple users. 
    About 3-4 days ago the Mail icon in dock had question mark and was accidently removed, along with program on my user.  Oops.
    1. Mail 4.4 is on other users and works fine, but for me it does not work and tells me V4.3 does not work with latest OS X. 
    2. I reloaded software from my user with original disks  (Oct, 2010) and got Mail 4.3 again. Mail 4.3 did not work with latest OS.  I am unable to load Mail.  Gives Yellow error message.    
    "  You have Mail version 4.3 (1081/1084). It can’t be used on Mac OS X Version 10.6.7 (Build 10J869). For more information, click the Help button."
    3. Tried to update software and look for update for mail 4.3 on Apple site to no success.
    Hate to go to MS-Entorage ( I may need to learn something new and alien) mail program since contracts are in Mail/Address Book.
    Ideas?
    MattDeeds

    Matt,
    I would download and run the 10.6.7 combo update.
    http://support.apple.com/kb/DL1361
    Regards,
    Captfred

  • Can I use one itunes account for multiple users and multiple devices

    Can I use one itunes account for multiple users and multiple devices?

    The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....

  • How to bundle a .FLA and multiple .SWF files in one .EXE?

    Hi,
    I have a .FLA file which uses loadMovieNum() to load various
    .SWF files when each one is called by the user clicking on a
    button. Each .SWF file also uses loadMovieNum() to call a second
    .SWF file. When I publish the .FLA file as a .SWF file it all works
    beautifully.
    Now I need to package the entire project into a Windows
    projector .EXE file for offline use on a computer without the Flash
    Player. When I publish the main .FLA file as a .EXE file, the .SWF
    files still load, although they blink before fully loading and
    displaying steadily.
    What I would really like to do is to bundle all the .SWF
    files into the .EXE file so when I send the finished project to the
    end user, they only have to deal with one file, rather than a
    folder with the .EXE file and multiple .SWF files.
    Is there a way to do this?
    I am using Flash 8 Professional.
    Thanks,
    Cam

    Since this isn't going to be web-based, why not include all
    the external swf files into the same Flash file and then use
    attachMovie?
    This will allow you to create one .exe file that would
    contain EVERYTHING. Since you aren't worried about loading speeds,
    you don't have to load the movie clips, but can simply create one
    large Flash file.

Maybe you are looking for