Advice on specs for new X220

Greetings - I've had several X series machine and now interested in getting X220. I'm keenly interested in getting a SSD but find the stock 120GB a bit small for my needs (I'm a data analyst). I've read all I can on this forum and others but remain unsure of what to do. I humbly offer that money is no object. Happy (?) to purchase after-market SDD if I can find one large enough that fits what I understand is a smaller space (7mm?)
So what X220 config do you recommend and what SDD could I get if money were no object? I'd like at least 240GB if not more.
Thanks in Advance - Mike
Solved!
Go to Solution.

All of the x220s have SATA 3 capability. See http://www.lenovoblogs.com/insidethebox/2011/04/sata-3-0-600mbs-on-thinkpad-notebooks/ for more details.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

Similar Messages

F.Spec for new excise invoice format development

Dear Friends
Can anyone pls tell, what are the details/info to be included for drafting an F.Spec,required for new excise invoice development?
The new format is given in an XL sheet. Any guidance on how to prepare an FSpec for the same?
Any guidance/help will surely be appreciated.
Rgds
Sumanth.G

Dear Sumanth,
As part of creating a FS, you have to do the following steps.
1) List of details to be printed (you can get the same from the XLS heading)
2) Now you might have already reached a conclusion as to whether you are going to print excise invoice in J1IP or
any Z transaction.
3) Based on the above choice,your ABAP-er will be doing the SMARTFORM or SCRIPT.
4) All you have to do is to write down a logic to fetch the required details to be printed , based on the input.
Assuming your input will be the excise invoice number, and you need to print the details of the corresponding delivery/invoice/item/price/qty/ etc..
You can get the same from tables related to excise ( J_1IEXCHDR
J_1IEXCDTL )
The REF DOC1/ REF DOC2 will provide the details of the Billing.
Now more details on the billing can be got from VBRK/VBRP
If you need the details of delivery , you can make use of table VBFA and input your invoice number as subsequent document and get delivery number (type=j) which is the preceding document.
Now more details on delivery can be got from tables LIKP/LIPS.
Hence kindly understand what are the details to be displayed.
If there is any trouble in writing the logic, kindly revert back.
Thanks & Regards,
Hegal K Charles

Specs for new iMac for X

Looking to do full upgrade and get a new iMac and also FCPX. Would this computer serve me well? Any quick thoughts would be appreciated.
Still on FCP 6 and an old Macbook Pro, but taking the plunge next week.... Thanks for any advice!
3.4GHz Intel Core i5 Quad-Core (Haswell)
8GB of 1600Hz DDR3 RAM
1TB 7200rpm Hard Drive
NVIDIA GeForce GTX 775M Graphics (2GB)
27" LED-Backlit IPS Display
2560 x 1440 Native Resolution
Thunderbolt, USB 3.0, SDXC Card Reader
Includes Mac OS X 10.10 or OS X 10.9

If you can, bump up the RAM to 16GB. Otherwise the spec looks good for FCPX.
http://www.apple.com/final-cut-pro/specs/

SPECS FOR NEW MBP HARD DRIVE AND HOW TO INSTALL NEW OS AND USE TIME MACHINE

I need to replace the hard drive in my early-2006 1.83 MacBook Pro (15-inch), because the Genius at the Apple Store told me that I'm getting weird behavior on it due to the drive slowing down and that it won't last much longer.
I have 2 questions:
First, I want to order the drive online and have it installed locally. I will probably get a 320 to 500GB drive. What are the exact other specs I will need to find the right one?
Second, I am currently running 10.5.8 and backing up with Time Machine. I would like to install 10. 6 on the new drive, but don't know how to go about using the Time Machine backup to get all my apps and files running. Can someone describe this procedure for me?
Many thanks!

Hi Annie,
You need a 2.5" 9.5mm high SATA HD, either 5400 or 7200RPM. Check out macsales, newegg, amazon to name a few places.
How to restore from a TM backup: http://support.apple.com/kb/ht1427
Prepare your HD by formatting and partitioning it:
1. Boot from install disc (press power button, immediately insert install disc and hold down c key).
2. Select your language.
3. Open Disk Utility from Utilities menu.
4. Select the HD in the left pane (the manufacturer’s name and the HD model number).
5. Click on the Erase tab.
6. Choose the Format: Mac OS Extended (Journaled).
NOTE: if you want to zero the HD (which I always think is a good idea, but does take time), click on Security Options, click the button for Zero Out Data, click OK. The larger the HD, the longer this will take, in some cases several hours.
7. Click on Erase and wait for the entire process to finish.
8. Click the Partition tab.
9. Click on Volume Scheme: and choose the number of partitions (normally just one unless you have other plans).
10. Click on the Options button (located underneath the Volume Scheme pane) and select GUID.
11. Click Apply.
12. Quit Disk Utility and continue with the installation process to install OSX or run Restore from a TM backup; when finished, repair permissions, run updates, repair permissions.
Message was edited by: tjk

Input specs for new pouch and nano

I have a question regarding the new record app that has finally arrived on the touch and the nano. Does anybody know what quality the recordings are? Are the usable for radio interviews is it more like the mic from Belkon that is ok for simple notes.

Well if the new Touch does support voice memos then someone should tell Apple. I just downloaded the manuals for the new Touch and new Nanos and whereas the nano manual includes a section on voice memo recording there is no mention of voice or memo or recording in the manual for the new Touch!!!!
What gives?

Spec for new iMac (32bit apps)

Hi All
Very close to buying a 27" quad core i7, contemplating upping the RAM, however having spoke to an Apple advisor in store I was informed that the primary app I will be using (Final Cut Express) is currently 32 bit, as I understand it 32 bit apps don't see any more than 4gb of RAM in any case, is there any real benefit to me buying extra RAM just now?
I have an older version of FC Studio 1 (with FCP 5) which is reportedly unstable on 10.6, I was going to upgrade, but the Apple guy hinted that most of the Pro apps are in line for a 64bit upgrade, so will probably hold off until then.
So for my useage:
Converting EOS H.264 files to Apple Intermediate (using MPEG Streamclip)
Some light Photoshop
Cutting HD and burning bluray (via Toast 9)
Is it worth getting more RAM?
Is the i7 overkill, would a high clocking i5 dual, or the non HT i5 quad be sufficient?
Many thanks

Very close to buying a 27" quad core i7, contemplating upping the RAM, however having spoke to an Apple advisor in store I was informed that the primary app I will be using (Final Cut Express) is currently 32 bit, as I understand it 32 bit apps don't see any more than 4gb of RAM in any case, is there any real benefit to me buying extra RAM just now?
I'd advise getting the machine with 4GB and see how it runs. If FCE is your only app running the performance should be OK. However if you like to run several applications simultaneously upgrading your RAM would be wise. You may even want to upgrade it if FCE is the only app running if you tend to have large files and/or run multiple sessions. I would not buy the RAM from Apple though, I'd recommend a Crucial or OWC's RAM.
Is it worth getting more RAM?
Probably but you may want to try the machine first with only 4GB.
Is the i7 overkill, would a high clocking i5 dual, or the non HT i5 quad be sufficient?
You will get different opinions on this but if you can afford the i7 get it, if for no other reason it makes the machine a little more future proof.
Regards,
Roger

Need advice and guidelines for new mob app

Hello, my name is Leo and this is the first time i try to do this so bare with me plz. I'd like to create a mobile application and after asking around and i asked A LOT, iv decided to use JavaMe. Correct me if im wrong but as I understand it, as long as a cellphone has java then compatibility is not an issue
I have some background in java so can someone tell me where or how i should start? Do i use netbeans or i can stick to using jcreator or what? what else?
Also, can i create a website that access the mobile application (from the above) after i hook up my cellphone to the pc?
if not then can i just create a regular application and have it access the webserver and phone seperately then do somethin glike bringing data from both sides and displaying them to me?

Hi Leo,
for beginner netbeans is the best solution. This ide provide the best graphical representation and flow chart of mobi app. I suggest if u want to develop a mobile application then u should go for netbeans but if u want to develop game then I dont think netbeans is the limit. if u want a small 2d game then its ok but if u want somthing more then i think u should learn core j2me apis and develop it by ur own and compile and package it using sun wireless toolkit 2.5
Although u should learn the basic of j2me read some documentation work on sample app comes with netbeans ans swtk.
Best of luck

Request for new battery specs

Can someone tell me what are the specs for a fully charged new battery for a 2008 MB (aluminum)?
i.e. full charge capacity, voltage, amperage, etc.
My current battery shows 3276 charge capacity, 12419 volts, 0 amperage, 551 cycles.
It used to say "replace soon", now it says condition "normal".
Did the battery calibration thingy, and MB shuts down sooner around 17% these daze.
Time to replace?
Thanks for all replies.

Full capacity originally was around 4200. At 550+ cycles, your battery has had a long and productive life. Consider a new one.

New Specs for Apple Cinema Displays ???

I seem to recall that during the WWDC New Specs for Apple Cinema Displays were made public.
What are these new specs ?
Or am I mistaken?<<br>
PowerBook Mac OS X (10.4.7)

Thanks a.brody
The Online Apple Store and the Apple dealers here in Germany either don't seem to be aware of the new specs or they have a lot of the "older" displays (Brightnes: 270 cd/m2 Contrast: 400:1) left in stock which they want or need "to get rid of".
I'm thinking of ordering either a 23" or a 30" for my MacPro, but the new spec cinema displays are not yet available here.

What are the ideal specs for a DigiBeta master tape when authoring a "widescreen anamorphic" 16:9 SD DVD (original aspect ratio is 14:9)?

I just received the masters for a new SD DVD. I would like to author a "widescreen anamorphic" SD DVD horizontally squeezed widescreen image stored in a standard 4:3 aspect ratio DVD image frame. (On 4:3 displays, mattes should preserve the original aspect ratio. On 16:9 displays the image will fill the screen at the highest possible resolution.)
Below I've listed the specs of the Digi Beta master tapes the producers have sent to me for digitizing. I'd like to know this: What are the ideal specs for a DigiBeta master tape when authoring a widescreen anamorphic SD DVD, using material with an original aspect ratio of 14:9?
I've also listed my guesses below. Please let me know if my guesses are right. If not, please suggest alternatives (and if possible explain why.)
TECHNICAL SPECIFICATIONS OF EXISTING MASTER:
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: NTSC - CCIR 601
Frame Size: 720 x 480
Anamorphic: Full-Height Anamorphic (16:9 image displayed in letterboxed, non-distored 4:3)
Display Format: 4:3 Letterbox
MY GUESS AT IDEAL TECHNICAL SPECIFICATIONS (for a DigiBeta, that is):
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: Square
Frame Size: 720 x 540
Anamorphic: YES
Display Format: 16:9 Anamorphic (horizontally squeezed widescreen image)
Please feel free to ask for clarification or further information you need to answer my question.
Thank you so much in advance for your help!
Best, Noetical.
BTW, I can't wait for the day when everything has gone digital and we get digital intermediates instead of tapes to digitize!

Hi Nick...thanks for taking the time to reply to my question.
Nick Holmes wrote:
What you have there is a mess.
NTSC pixels are never square.
NTSC is 720x486, even when it is Anamorphic.
You shouldn't be using an already letterboxed master to make an Anamorphic version. Get the master that was made before the letterboxing stage.
When you make an Anamorphic DVD it should display as 16:9 full screen automatically on widescreen TVs.
The same DVD will automatically letterbox on 4:3 TVs.
Um yeah...duh. That's exactly what I was trying to explain in the preface of my question. I'm sorry if I didn't make it clear...all these things you mention are the reasons I'm putting together a list of the technical specs of the DigiBeta I need so I can have them send that instead of the stupid letterboxed version.
Look, I'm sending this request to some intern at their offices in England, asking for a master with which I can make an Anamorphic DVD. They already sent me this master, which as you and I both agree is an idiotic asset to use for these purposes. As such, I was hoping for advice on a more precise way of requesting the master that I need than asking for "the master that was made before the letterboxing stage." Upon reflection, perhaps I'll just do that. If you or anyone else has a suggestion about something I should add to my request that would improve the odds of them sending the tape I need, please repond. Thank you!
BTW, It's been a long time since anyone has responded to something I've written or said as though I'm an idiot. I remember now that I don't really like it. (Moving along...)

Helpful hints for new Creative Zen MP3 2/4/8/16/32 GB (flash) Users On

Summary of helpful hints (from this forum and me) for new Creative Zen MP3 2/4/8/6/32 GB (flash) Users Only!
Rev..
Date: 4/28/2008
Author: ZenAndy
Creative terminology:
MP3 Player Recovery Tool - A program that resolves the majority of player problems quickly.
One click is all it takes to update your player to the latest available firmware, and to give your player a clean bill of health.
Link: http://www.creative.com/products/mp3...me.asp region=
Note: You can also go to "Creative" "Support" "downloads" choose your MP3 Player type to obtain the latest firmware and software releases.
Note: On your Zen you can look under "System" & "Information" and then compare the firmware download
releases OR you can have the "MP3 Player Recovery Tool" (above) do it for you automatically.
Note: Creative Zen 4/8/6 GB "MP3 Recovery Tool" DOES NOT stop on a firmware comparison match.
Note: All firmware releases/revisons for the 4/8/6 GB Zen also works (is the same as) for the 2 GB & 32 GB Zen.
Recovery Mode - If you experience one or more of the following symptoms, it is recommended that you boot the player into its unique Recovery Mode, and then clean up, format or reload the firmware.
. The player is not detected in Creative MediaSource or Windows Media Player
2. The battery does not last as expected
3. Your computer stops responding during file transfers
4. There is a power outage during file transfers
5. There is an error about firmware
6. LCD displays a "Firmware Problem" message
7. Your player is not responding.
8. The player is performing erratically.
Getting Started
. Load your Creative Zen software from CD FIRST and BEFORE plugging the Zen MP3 player, using the short cable, into the PC USB port to charge it.
2. Try charging the Zen MP3 player directly from the USB port on the PC. If not, make sure the USB Hub you are using is adequately powered to provide full charging current to the Zen player. Also, try to have the Zen MP3 player as the only USB device, if possible, on the USB hub.
Some/most Creative Zen flash MP3 Music players come "fully discharged" so, in the mean time, just read the manuals.
FULLY charge the Zen MP3 player for several hours (~4.0 hrs max) until the battery symbol is NOT flashing AND the battery symbol/icon has a small plug/key symbol in the middle.
After the first full charge - additional charging is much quicker about 2 /4 hours. (From 0% empty to full)
3. Go to Creative/Support/Downloads and check for the latest software releases for the Creative Zen. Then check on your Zen MP3 player under System/Information for your firmware revision. Make sure you have the latest software downloaded on your PC and firmware on your Zen MP3 player. < Latest revision [.2.0] 28Feb08>
OR
You can run MP3 Player Recovery Tool - see above.
4. In some cases you might have to do the Recovery Mode "paper clip reset" to get the Zen MP3 flash player started.
See the Zen User's Guide FAQ. The paper clip reset hole is on the bottom edge below the music pause/run switch.
(Not the slotted mic hole on the top edge of the player near the earphone jack and SD card slot!!!)
5. My preference is to have the player shutdown/off before inserting and removing the earphone/headphone plug.
Recovery Mode Using The Paper Clip OR
Alternati've Method For Recovery Mode Without The Paper Clip.
Why use it's
If you experience one or more of the following symptoms:
. The player is not detected in Creative MediaSource or Windows Media Player
2. The battery does not last as expected
3. Your computer stops responding during file transfers
4. There is a power outage during file transfers
5. There is an error about firmware
6. LCD displays a "Firmware Problem" message
7. Your player is not responding.
8. The player is performing erratically.
Save a copy of your player's content, if possible, before cleaning up the memory!
Recovery Mode Using The Paper Clip Reset Method
#. Turn off player if not already turned off
#2. Press/hold play/pause button. If you accidentally release
the button, start this reset procedure over again.
#3. Gently push the end of a metal paper clip into the reset hole on
the botton edge below the play/pause switch.
(Do not use the slotted mic hole at the top edge near the earphone jack)
#4. Slide the on/off/lock switch towards the on position - slide it to the botton hold
until the display lights up and then release.
#5. The recovery mode screen appears and four menu items are shown - see below
<Alternati've Method For Recovery Mode Without The Paper Clip>
#. Turn off player if not already turned off
#2. Press/hold play/pause button. If you accidentally release
the button, start this reset procedure over again.
#3. Slide the on/off/lock switch towards the on position - slide it to the botton hold
until the display lights up and then release. Be patient and wait!
#4. The recovery mode screen appears and four menu items are shown:
< Clean Up> - cleans, rebuilds and reorganizes your player's memory and restores it to optimal efficiency.
When the cleanup is complete, select Reboot. Your player restarts and starts rebuilding its music library.
Note: Your player's firmware is reset to default settings after your player's memory is cleaned up.
Note: This procedure the hide/show password is reset.
<2 Format All>- Warning - Formatting your player erases all content on your player's memory and resets your player's firmware to default settings. If possible, back up all data on your player before proceeding.
Also, you can do this from the PC see Zen User's Guide. FAQ
<3 Reload Firmware> - Caution !!!! Selecting Reload Firmware erases your player's firmware.
DO NOT select Reload Firmware unless you have downloaded a newer firmware version for your player, or have been advised to do so by Creative Customer Support.
Note: My advice when loading/replacing firmware is to connect directly
to the PC USB port without using a USB hub.
<4 Reboot> Restarts the player just like the "on/off/lock switch" when switched ON.
Note: Having NO battery energy/charge/juice this procedure will not work.
Lithium-Ion Polymer Battery Hints
Ref:
http://www.omnica.com/omniview_electronics2.htm
http://en.wikipedia.org/wiki/Lithium_ion_battery
. Allow the battery to completely discharge from time-to-time then recharge it fully.
2. Lithium-Ion batteries loses about 5%- 0% capacity per month.
3. Lithium-Ion polymer batteries have about 300-500 discharge/charge cycles.
4. A half full battery indication (50% @ /2 the battery color) used up about 24 hrs worth of battery. Below 50% the indication goes fairly fast to the max of 30 hrs. Note: The battery level indication seems non-linear through out its range.
5. Battery is Empty~0% - warning screen will appear on LCD and player might shutdown.
6. Battery is Full- 00% with battery symbol NOT flashing AND plug/key symbol in the center of the battery.
7. It takes about 2 /4 hours to charge the battery from empty to full.
8. It takes about 4 hours max to charge a "New" Zen player shipped from the factory.
9. There is a battery manufactuer's failure rate, which is normal ~ % or less, in which the Lithium-Ion Polymer battery refuses to charge. Creative, ships the Zen MP3 players with some or no charge so there is very small probability that you could have one. I call it the "Deep Six Discharge Battery" Contact/call Creative for replacement.
Documentation
There are several pieces of documentation you might need to read to fully understand and use your Creative Zen MP3 flash player to its fullest capabilities.
#. Zen Users Guide "English" - For Zen MP3 Player - download from Creative/Support/Product documentation
#2. Zen Quick Users Guide /Front/Back - download from Creative/Support/Product documentation
#3. Sync Manager (Creative Zen) Click on sync symbol on PC task bar then help
#4. Creative Zen Media Explorer - Just look under the main help menu
#5. Windows Media Player <if used>(Microsoft)Use the help files with this program.
General Tips to increase/decrease the playing time on your Creative Zen flash player.
<Creative Battery Spec: 5 Hrs. Video & "UP TO" 30 Hrs. Audio/Songs>
Please do the following:
. Volume control lower/higher - higher volume settings will decrease playing times. This is logical. More output "volume power" decreases the battery juice.
2. Audio Settings: EQ, Smart Vol, & Bass Boost will effect your playing time but I believe they are not critical as the Volume & Bit Rates(28 kbsp and others) / File Format (MP3,WMA) & Lock Switch.
3. Bit Rates & File Formats Do Matter. Bit Rates and File formats will increase/decrease your playing time.
Per Catherina-CL
"WMA files will use up more power than MP3 files, and higher bitrates more so than standard ones (like 28kbps MP3). Best thing to do is rip an album in 28kbps MP3 and leave it playing in a loop on a normal volume level. See how long the battery lasts then."
Please Note: The main difference between MP3 and WMA is the compression. According to Microsoft a 64KBPS WMA file is the same quality 28KBPS MP3. This is of course up to a person's preference but you may find you can get better compression out of WMA.
4. FULLY CHARGE your Zen. This means the battery symbol is NOT flashing AND there is a plug/key symbol embedded within the battery symbol. The battery is 00% FULL under BOTH conditions. Having just the battery symbol all green will not do it.
From the link:
http://www.omnica.com/omniview_electronics2.htm
Regarding lithium-ion shelf life, one of our engineers recently met with a battery-house representati've. It has come to their attention that repeated charging and re-charging of a less than fully discharged Li-ion cell affects the battery "gas gauge" included with many devices. Over a number of cycles there is a resultant loss in accuracy. Frequently, the indicated remaining charge has little relationship to the actual amount of life left in the cell! Fortunately, according to the battery expert, the gauge will reset itself if the battery is allowed to completely discharge from time-to-time.
5. Having different types of earphones/headphones will increase or decrease the playing time by how much "electronic load" the earphones/headphones create on the Zen player. There are some power hungry earphones/headphones out there.
The 6 ohm earbuds conserves battery power more than the 32 ohm earbuds supplied by Creative. (About 0% more)
6. Always, always lock your Zen player while playing music. This cuts off the power drain from the color 2.5" LCD and blank the LCD screen. After all, you can't read the LCD screen if it is in your shirt pocket and playing music!
7. Make sure you have the latest firmware upgrades in order to get the best of your Creative Zen Flash MP3 Player.
Troubleshooting
Your Creative Zen is extremely complex.
Check this link to peek inside player http://www.anythingbutipod.com/archi...isassembly.php
Also, this link:
http://arstechnica.com/journals/hard...ssor-behind-it
There could be a million things that could go wrong with your player so you will not be the FIRST or LAST to have a problem. Keep in mind, there are many, many others that have the Zen with no problems whatsoever. Things happen, but Creative is there to help.
Dropping a Zen or any other player might/will/possibly ruin the player for good!!!
Since this player is solid-state (no moving parts e.g. mini-disk dri've) then the only thing that will keep it from running for years is the non-user replaceable Lithium-Ion battery. I will concentrate on some troubleshooting tips which are battery related but I hope you have already the latest firmware downloaded and installed on your player
Battery - Lithium-Ion Polymer
#. Battery won't charge "out of the box" new player.
A. First, read above "Getting Started"
B. Next, try a different USB mini cable.
C. Next, there is a battery manufactuer's failure rate < %, in which the Lithium-Ion Polymer battery refuses to charge.
Creative, ships the Zen MP3 players with no charge so there is very small probability thatyou could have one.
I call it the "Deep Six Discharge Battery" Call / Contact Creative.
#2. Battery won't charge properly after using the player for some time.
A. When you plug in your player into the USB port via mini USB patch cable, the connection resets the player to the "docked screen" with the battery level gas guage , in the right hand corner.
Sometimes this action does not reset the player properly but there is no indication to you that the player is charging.
Just disconnect/connect the USB cable again.
B. Sometimes, the Zen player gets confused and you have to do a Recovery Mode "paper clip reset" which forces the player into a "special menu screen" to clean-up the player and to reset the player which allows showing the "docked screen" while charging the unit. See Zen User's Guide for explicit instruction und FAQ.
C. Since the Zens came out late in 2007, the maximum of 300-500 charge/discharge should not apply YETbut users beware, as with any other Lithium-Ion Polymer battery it will not charge fully "like new"because of a " fixed shelf life" (2-3 yrs) OR too many charge/discharge cycles. A battery replacement is in order.
Methods of charging the Creative Zen MP3
. The short mini-standard USB cable provided by Creative from the factory. Plugs into a PC USB port.
2. Uni'versal Power Adapter (Creative) plugs into the wall. Works "anywhere in the world"
Note: Different countries have different wall AC voltages and hertz requirements. This has adapters for different countries/locations wall outlets and a uni'versal power supply for all voltage and hertz requirements.
Note: This is a heavy duty high/fast charging wall outlet charging adapter. (2400 ma)
3. Auto/Vehicle 2 VDC charger (Creative) or other compatible vehicle 2 VDC to USB charger.
4. EARHUGGER IPOD POWER POD - MP3-8370 (White compact module)
http://www.earhugger.com/powerPod.html
http://www.amazon.com/Earhugger-MP3-.../dp/B000QTTKSS
This compact module will solve all the following travel modes and conditions:
. Camping, hiking or outdoor travel - no PC or noAC or maybe no auto/car.
2. Airplane travel - no PC or no AC or no auto/car.
3. Train/subway travel - no PC or no auto/car
4. Car travel - no PC or no AC
5. Foot travel - no PC or no AC or no auto/car
It uses 4 ways to charge the Zen:
. Retractable mini-standard USB cord for PC charging. <--- does not communicate with PC! - only for charging
2. Retractable mini USB cord for auto/vehicle charging (Fused)
3. Retractable mini USB cord for wall 0-20 VAC 50/60Hz charging. (non-international use plug style)
4. 9 VDC battery terminal for using standard alkaline 9 VDC or high ma Lithium 9 VDC to charge the Zen via
mini USB cable. Note:You might need several alkaline batteries to charge the internal 550 ma hr Zen battery!
Great for remote destinations.
5. Rechargeable portable battery packs.
Black & Decker has several "Power To Go"models CPI0B-C & CPI20XB (not for international use because of 20 AC 60Hz only charging wall wart)
Note: There are other brands that also do this method of charging.
http://www.blackanddecker.com/Produc...Path=4033.4040
You charge this portable NiMH battery pack from the AC wall outlet so you can carry with you on trips to charge the Zen.
6. Mobile phone chargers. Some have a mini-USB plug for charging the phone but it could be used to charge the Zen BUT BEWARE IT COULD RUIN THE ZEN IF IT IS NOT COMPATIBLE! The output should have a voltage of 5 VDC +- 5% (4.75-5.25 VDC) ON THE PROPER MINI-USB PINS and a charging current at least 200 ma to 2400 ma. See this forum for the recommend phone phone chargers to use with the Zen.
Note: You are charging an internal Lithium-ion polymer 550 mahr battery in the Zen so the lower the charging current the longer it takes to charge.
Note: You will find that charging the Zen from the wall charger is much faster than the "current limited" charging on the standard PC USB port.
Note: For diagnostic purposes and emergency charging of the Zen it is wise to have an external (non-PC) charging device for your Zen.
Note: Only the battery charging symbol shows up on the Zen when using an external charger.
Scratches
All plastic screens will scratch, doesn't matter which type you have.
For minor scratches you could use the Novus three part cleaner, polish and scratch remover system. Do not use the #3 coarse abrasi've in this system! Be extremely careful in using this product !!!! Please check the web.
OR
Low abrasi've toothpase <--- some say this works
OR
CD scratch remover/repair kit <---- have not tried this.
The Zen (Flash) MP3 glass LCD screen is covered by the overlay plastic you see on the front. Worst case, you can have only the outer shell repaired and replaced by Creative.
To prevent scratches in the first place:
Use the Zen cloth bag which comes with the unit (sometimes ) to prevent scratches.
OR
Buy the Zen clear plastic case (Clear Case #70AB2600002). Sold by Creative.< I use this>
OR
Buy an clear plastic overlay. (Screen protector #70AB2600003) which goes over the LCD protector screen for protection. Sold by Creative.
OR
Also, you can cut up a "generic" PDA screen protector to fit the Zen.
OR
Obtain a "digital camera lcd screen protector" from a camera store or internet
OR
"Invisible shield" -The best protection money can buy
http://www.zagg.com/invisibleshield/...ns-shields.php
How to destroy your Zen - WHAT NOT TO DO
. Leave it in the auto/car/vehicle - the vehicle inside heats up 20-35 F higher than the outside temperature.
2. Leave it outside in freezing temperature 0C 32F. The LCD will freeze/discolor/absorb water.
Note: It is remotely possible it could recover when warm-up at room temperature.
Note: Just keep the Zen near your body heat when outside in freezing temperatures.
3. Dropping it might cause the LCD screen to crack or loosen up the internal connections to the electronics or short out the internal electronics.
Note: Use a protecti've case to cushion the blow from dropping the Zen.
4. Dropping or submerging or getting the Zen wet in water might short out the electronics and battery.
You could prevent destruction by immediately shaking the Zen vigorously in open air to dry it out.
5. Sitting on it could flex the electronics and short or open circuits which would cause a defecti've/faulty Zen.
<A bit of humor ... There is No Santa Claus, Easter Bunny or Tooth fairy and Creative does NOT give away money. If you destroy or damage your Zen you will pay not Creative>
How can you tell if your Zen is defecti've/faulty
. A "white screen" or a "totally blank black screen" shows up on the Zen LCD.
2. You cannot force the Zen into the special "Recovery Mode" menu screen.
3. The Zen refuses to "take a charge"(To charge up the internal Lithium-Ion Polymer battery)
4. The Zen LCD is cracked or distorted due to dropping or handling abuse.
5. The Zen clock does not keep accurate time (within 2 mins max per month)
Contact Creative if any of the above faults occur - the Zen is bad and nothing you can do will fix it!
WSOD "White Screen of Death"
The "White Screen of Death" is really caused by a hardware problem. You see, the internal Freescale/SigmaTel STMP3700 MP3 processor has to write to the LCD. If this operation is prevented by internal electronic opens or shorts, bad STMP3700, locked-up firmware, bad LCD or any other electronic component failure then the CPU might/will halt and refuse to write to the LCD which will be reflected in a "white screen of death" I cannot cover all the causes of the "white screen of death" but rest assured Creative should pick these problems up in their quality control manufacturing process with a 99% success rate. Problems do show up after the manufacturing process but Creative has warranty protection for this other % fault rate. (Which is normal in electronics manufacturing)
Media Content
Listening to the built-in music on the Zen is OK but after a while your question now becomes "What else can I do with my Zen "
Note: The "How to" instructions for adding Media content can be found in the Zen documentation.
Terminology:
Album: Collection of tracks or songs under one "album" title.
Artist: Track or song artist
DRM: Digital rights management - copy protection scheme - Zen cannot use music with this music protection scheme. (itunes) (But "itunes plus" will work)
Genres: Type or kind of music
<The following genres are defined in ID3v>
Blues,Classic Rock,Country,Dance,Disco,Funk,Grunge,Hip-Hop,Jazz,Metal,New Age,Oldies,Other,Pop,
R&B,Rap,Reggae,Rock,Techno,Industrial,Alternati've ,Ska,Death Metal,Pranks,Soundtrack,Euro-Techno,
Ambient,Trip-Hop,Vocal,Jazz+Funk,Fusion,Trance,Classical,Instru mental,Acid,House,Game,Sound Clip,
Gospel,Noise,AlternRock,Bass,Soul,Punk,Space,Medit ati've,Instrumental Pop,Instrumental Rock,
Ethnic,Gothic,Darkwave,Techno-Industrial,Electronic,Pop-Folk,Eurodance,Dream,Southern Rock,
Comedy,Cult,Gangsta,Top 40,Christian Rap,Pop/Funk,Jungle,Nati've American,Cabaret,New Wave,
Psychadelic,Rave,Showtunes,Trailer,Lo-Fi,Tribal,Acid Punk,Acid Jazz,Polka,Retro,Musical,Rock & Roll,
Hard Rock
<The following genres are Winamp extensions>
Folk,Folk-Rock,National Folk,Swing,Fast Fusion,Bebob,Latin,Revival,Celtic,Bluegrass,Avantg arde,
Gothic Rock,Progressi've Rock,Psychedelic Rock,Symphonic Rock,Slow Rock,Big Band,Chorus,
Easy Listening,Acoustic,Humour,Speech,Chanson,Opera,Cha mber Music,Sonata,Symphony,
Booty Bass,Primus,Porn Groove,Satire,Slow Jam,Club,Tango,Samba,Folklore,Ballad,Power Ballad,
Rhythmic Soul,Freestyle,Duet,Punk Rock,Drum Solo,A capella,Euro-House,Dance Hall
<A bit of humor: I think the above Genres lists are missing two - "elevator music" & Crying and Whining e.g. Country Western>
ID3 Tags: Internal file information associated with an Mp3 or wav audio file. This format contains
Track number, Album name/title, Genre, Artist and Song Title which can be sorted and indexed by
the Zen device.
IPTV: Is a system where a digital television service is deli'vered using Internet Protocol over a network infrastructure, which may include deli'very by a broadband connection. http://zencast.com/
JPEG: Is a commonly used method of compression for photographic images.
This is the only photo format used by the Zen.
MP3 and WMA music tracks: Music format used by the Zen.
Note: Having the wrong bit rates will drain the Zen battery faster. (See above)
MP3: Is a digital audio encoding format using a form of lossy data compression.
Non-protected AAC: Files are regular AAC files without any DRM: they can be converted to other formats (like MP3) and can be played on an unlimited amount of devices and burned an unlimitd amount of times. They have no restrictions.
Podcast: Is a series of digital-media files which are distributed over the Internet using syndication feeds for playback on portable media players and computers. http://zencast.com/
Protected AAC: Files are AAC audio files that contain DRM (Digital Rights Management), most often music purchased from the iTunes store. The Creative Zen cannot use these files.
Note: "Itunes Plus Store" have songs without DRM which the Zen can use.
Ripping CDs: Copying tracks from an audio CD on a PC and downloading tracks to the Zen.
Note: Use the Creative Zen Media Explorer for ripping audio CD is one method.
Song Title: Name of song or track
Track Number: Numerical number of track of CD album.
Track: General name for song or song title.
Unprotected AAC format: Music format used by the Zen
WMA:Is an audio data compression technology developed by Microsoft. The name can be used to refer to its audio file format or its audio codecs.
WAV: (or WAVE), short for Waveform audio format, is a Microsoft and IBM audio file format standard for storing an audio bitstream on PCs.
Note: The Zen's built-in microphone produces this audio file format.
Zen Audio Format:MP3, WMA, WAV, non-protected AAC (.m4a), Audible (2, 3, 4)
Zen Media Content: Video, Music, Audio, Photos/Images transferred/dowloaded into the Zen
Zen Photo Format:JPEG
Note: You can copy/drag/paste JPEG photos from your PC to your Zen for viewing.
Note: You can import photos & view photos from the SD card.
Zencast Organizer: Seamlessly integrates ZENcast media files with Creative portable media players and/or your computer
Zen Video Format:MJPEG, WMV9 and (with transcoding - MPED4-SP, DivX 4/5 and XviD)
Warning - In some countries (including the US) its illegal to do:
Copying audio DVD & DVDs
Defeating DRM MP3 Music (Digital Rights Management)
Intercepting/copying (non purchased) music.
Downloading music/songs from an illegal or "free" rouge website.
General Media Content links:
http://pro-music.org/Content/GetMusi...lineStores.php
Note: Check to see if your music files/tracks contains ID3 tags.
Note: ZEN also supports iTunes Plus tracks from the iTunes store,
Note: The following media content is only a small fraction of means and ways
of collecting/dowloading media content to the Zen.
Media Content from Creative Website(s)
Note: The Media Content can be found under "Fill your Zen" on the bottom of the Creative Zen product page.
http://zencast.com/
ZENcast is the ultimate source for free IPTV channels, video blogs and podcasts on the Internet. It provides quick and easy access to a wide range of interesting and entertaining video and audio content online.
http://www.audible.com/adbl/site/cre...seBVCookie=Yes
Audible.com - Audible.comis the Internet s leading audio provider of bestselling audio books, comedy programs and today s most relevant magazines and newspapers
http://creative.vongo.com/
VONGO is the video download service that gives you instant access to over 2500 hit movie and video selections from Starz .
Watch movies whenever, wherever on your ZEN. A great entertainment venue for watching movies while on the road or on the go.
http://www.napster.com/creative/
Transfer unlimited music to your ZEN without paying per song.
With Napster To Go you can:
Choose from over 5 million songs, plus new releases every week
Play music instantly from any internet-connected computer
Find old favorites and discover new music by exploring playlists, radio, Billboard charts and more
Create a library of your favorite music and build custom playlists.
http://www.emusic.com/ZEN
Choose from over ,500,000 songs
Burn unlimited CDs
Compatible with every MP3 player
No confusing restrictions-Own your music!
http://www.lala.com/frontend/action/...=user:2672@223
Why pay 99per song when you can get the whole album for $At lala.com, you can trade your used CDs for new music.
.8 million titles available for trade. CD quality guaranteed.
Every CD you receive is yours to keep - no restrictions.
Pay only $ per CD received. No monthly fees or commitments. Sign up is FREE.
http://www.amazon.com/b/ &node=62663
Buy or Rent Movies Online
Watch DVD-quality video downloads on your PC or ZEN
Conveniently download from your PC at work to your PC at home
Discover thousands of TV shows & movies available for download
I started this thread in April 08 to help other new Creative Zen MP3 (Flash) users. If there are common threads that are posted from new users then I try to make a section to inform other new users in solving their similar problems. I cannot believe that this thread was viewed over 0,000 times! Thank you for your "viewing" support.
Please note: This thread is constantly changing so check back for any new helpful hints, problem solving, troubleshooting and practical solutions for the Creative Zen.
"The Creative ZenR O C K S"
Zenandy
Message Edited by Zenandy on 08--2008 08:26 AM

Hi,
I'm from germany so no 'best buy' but I think I will lock around sleeve/bag for a different product with same measures. Any tip?
The clear plastic case is not what I want. I would like to use the player without such protections. I just want a sleeve to protect the player while its in my jacket/pants.
Btw, i have bought this version: Creative Zen (maybe european version?). I also doesn't seem to have your mentioned sleeve. I also couldn't find it on the website.
Anyway, thank you,
Chris

Choosing specs for a mac pro

Hello all,
I've posted this question a few times in the past and am still a bit unsure of what specs i should go with. With the student/teacher discount coming to an end soon, I thought I'd give it one more go. I am also curious how the new mac pro might affect my decision. I will not be needing a 12 core, but did this new product affect the specs for the lower models?
I am looking for a computer that will help me run my small business and keep my art portfolio organized. I'm willing to spend around $3000 and am also willing to use another source to buy less expensive parts to install myself.
My concerns are that it needs to run pretty smoothly with multiple programs open, no overheating, plenty of space for file storage and application support.
Ideally this computer will be my work horse for many years to come.
The programs that would most likely be open in conjunction with one another would be a combination of the following...mozilla, itunes, adobe bridge, dreamweaver, illustrator, and photoshop.
Specifically, i'll be using it for...
building a few websites
managing my small business
large photo file editing
keeping business files, artist receipts, etc
cataloging my art portfolio (large photo files)
storing photos, music, and short videos
graphic design
infrequent film editing
infrequent sound editing
The programs i'll be using:
CS5 (mostly photoshop, illustrator, bridge, dreamweaver)
iphoto
itunes
maybe minimal finalcut/soundtrack pro
maybe minimal aftereffects
I received this response the first time I posted this question and have found it to be very helpful, thanks bill! I'm wondering if anyone else would like to expand on it or perhaps offer other options for my situation. Thank you all very much, any advice is appreciated.
"My advice would be to buy the standard configuration 2.66GHz Quad Core (i.e. 3 x 1GB RAM, 640GB hard drive) from the Apple store, with the exception of the graphics card which you can buy as a CTO option for $200.00. It is well worth the upgrade from the GT120 - I know, because I upgraded myself last November after using a GT120 for 4 months.
With regard to the memory, if you can afford it now, buy 4 x 4GB from OWC now. If not, I would suggest that you buy 2 x 4GB now, and then add another 2 x 4GB in the future. 16GB of RAM is a much better option than 8GB for your requirements. You can sell the 3 x 1GB RAM to OWC in "part exchange", and there would be little difference in price for 2 x 4GB to the CTO option of 4 x 2GB.
http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#1066-memory
Instead of buying 2 x 1TB hard drives as a CTO option, you could purchase 2 x 1.5TB or 2 x 2TB HDDs for less money, and you would still have the 640GB. Spare drives are always useful. I use my original 640GB as a spare emergency system boot drive (OS and applications) in an external enclosure.
Another alternative is to wait a few more weeks, in case the rumours of the introduction of a new Mac Pro range in June have any foundation."

That advice looks pretty sound to me. What I would add is for internal drives you need one for storing your working files (better not to have those on your system drive but not really a big deal). And one for backup with Time Machine. What I also have is a separate external drive to clone my system so I have 2 backups.
And I have a partition on one of the internal drives that is used ONLY as a Photoshop scratch disk. This is by far the fastest solution unless you want to create a raid system. Never have your scratch disk on the same drive as your system drive, not even as a partition. You only need around 500 MB for this and it's best if that partition is dedicated only as a scratch disk.
You can create all of this with partitions for some of it, no need for lots of drives, except use different drives for Time Machine and your clone disk so both can't go out at the same time. I think for speed purposes that the scratch disk and Time Machine should be on internal drives, but Firewire 800 is pretty fast for an external.
Other than that your biggest concern is ram. Get as much as you can afford because that will determine your speed more than anything else.
I was working on a 4 year old iMac, which is a pretty good machine, but the limited 3 gb ram was causing problems because I have Photoshop, Illustrator and InDesign open all the time along with Mail, Chrome and a couple of others. When I got a Mac pro last year to replace it I got 8 gb of ram and the speed has been incredible.
Kevin
Edit: Forgot to mention that you shouldn't buy the hard drives or ram from Apple, they are way too expensive, get the minimum you can from Apple then get new stuff, OWC is a good source.
Message was edited by: Kevin Horn

Server Specs for SLES and GW 12

I need to look into a new server to put SLES and GroupWise 2012 on it. I am having trouble finding server specs for this, so I was hoping to get a little advice. GW will be the only thing on this box, one PO with about 150 users. Hoping to build something or purchase something that isn't too expensive due to budget restraints.
Thanks

I work for a small non profit organization and we only have one server, never found the need for virtualized servers.
>>> magic31<[email protected]> 3/6/2013 1:46 AM >>>
umchs;2250164 Wrote:
> I need to look into a new server to put SLES and GroupWise 2012 on it.
> I am having trouble finding server specs for this, so I was hoping to
> get a little advice. GW will be the only thing on this box, one PO with
> about 150 users. Hoping to build something or purchase something that
> isn't too expensive due to budget restraints.
>
> Thanks
If this is going to be a dedicated physical setup (you are not planning
to run GroupWise on a virtualised server) you should not need a big
budget to find a decent server for those 150 users.
IMO, a dual core CPU with 4 GB of RAM would seem quite sufficient in
this case. Getting a proper disk controller (with a true hardware raid
handling if you are looking for a raid setup) & decent disks that can
handle the I/O required is important too.
The A brand entry level servers that I've seen easily meat this
requirement. Do make sure it's suitable for 64bit.
In any case, GroupWise 2012 has about the same requirements version 8
would demand.
I'm curious, you are not already virtualising servers?
Cheers,
Willem
Knowledge Partner (voluntary sysop)
It ain't anything like Harry Potter.. but you gotta love the magic IT
can bring to this world
magic31's Profile: http://forums.novell.com/member.php?userid=2303
View this thread: http://forums.novell.com/showthread.php?t=464618

I want the cursor to be in the address bar when creating a new window; it works for new tabs and in a new private window, but not in safe mode.

I have tried following the advice offered in the few different threads I have found on this but nothing fixes it. I want the cursor to be in the address bar when I open a new window and/or when firefox opens without restoring a previous session. I fixed the issue for new tabs via about:config but this doesn't work for new windows. I tried safe mode and the problem persists. In new private windows the cursor is in the address bar.

The search box in about:home steals the cursor. Changing your home page to something else will cause the cursor to start in the address bar for new windows.

Report Painter for New GL

Dear experts,
I need to create a custom report with ReportPainter with the data you see with t.FAGLB03.
Since there are no standard reports for New GL, to copy and modify, i created a library by copying the library 0FL (Table FAGLFLEXT) and i stopped after :(. For example, "Lead column" must be a hierarchy of profit centers. In the "Element definition" i added "Name" - "Profit Center" and chose "Characteristic is Interpreted as Set / Hierarchy," and "Characteristic is Interpreted as variable. In the list of "Value of variable" for the "From" there is no variable that refers to the table FAGLFLEXT, PRCTR field.
What should I do? I create all the necessary variables with T.GS11, or is there an easier way? Can I use something existing?
Please, can you give me an explanation step-by-step what I should do. Any advice is welcome!
Thank you in advance.

Hi Serena,
As stated you can create your own reports using the standard SAP library 0FL
you do not need to create a custom library.
One tip I have is that If you are creating reports with the Profit Center scenario active then
you can still use transaction code KE5B to copy your Financial Statement Version (FSV) groups to EC-PCA.
Even though your reporting source will NOT be EC-PCA in the New G/L, this method can still be
used as a short cut to create account groups that can be referenced as sets in Report Painter.
I used this method in the lead column for "Account Number" to easily generate a FSV style report
in report painter in the New G/L with the profit center scenario activated.
- Good Luck

Advice on specs for new X220

Similar Messages

Maybe you are looking for