Advice on steps to take when changing from BES environment to BIS environment?

I have seen posts on switch to the BIS environment but I am leaving a company with BES and would like to convert my BB to use with BIS.. I think there are BES rules, etc that I would like to get a clean slate on but wish to keep my address book, calendar, etc.  Also, the company had backup over the network versus using Desktop Manager.. I probably need to go back to that.. is there anything I should know?

well if you wanna retain your calendar and contacts, backup your device. Typically you will wipe it to clean it from previous BES, but it wont conflict with BIS, so you can use with BIS without doing anything. Now you have to create a BIS account and then add your personal or compnay account
Click on KUDOS to appreciate our efforts and mark the thread RESOLVED if your issue is resolved.

Similar Messages

  • Advice on Promoting Master Data Services Changes from one environment to another, e.g. DEV to UAT

    Hi,
    Has anyone got experience of creating a script to promote Master Data Services changes from one environment to another, e.g. Development to Production please?
    The changes basically consist of adding several new MDS members which can be accessed via Excel.
    Thanks in advance,
    Kind Regards,
    Kieran.
    Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

    In MDS terminology an Entity is metadata, and Entity Members are the data. 
    Typically changes to an Entity (ie model design changes) are promoted to different environments.  Model design changes can be replicated manually in each environment or you can Export the model and Import it into the target environment.
    Adding, editing and deleting entity members is performed directly in each environment.
    If you want to selectively import data from a Dev environment, you can use staging.
    David
    David http://blogs.msdn.com/b/dbrowne/

  • Error message when changing from portrait to landscape when printing

    I receive an error message when changing from portrait to landscape when trying to print.  How do I resolve this issue?

    Hi hillclimbing,
    Can you please let me know the exact error message you see as that would be helpful.
    Does this occur with all the pdf files.
    What OS and Acrobat version are you using?
    Regards,
    Rave

  • Problems with email account on ipad2 when changing from mobileme to icloud

    Problems with email account on ipad2 when changing from mobileme to icloud

    Would you please give us some more information about your problems.

  • [svn] 3629: take trunk change from rev.3603

    Revision: 3629
    Author: [email protected]
    Date: 2008-10-14 11:55:28 -0700 (Tue, 14 Oct 2008)
    Log Message:
    take trunk change from rev.3603
    Removed check which trapped const initialized declaration within a loop (file FlowANalyzer.java:3337)
    In general, decidability of const'ness is a flow problem. In this case the error was being reported for
    a const initialized declaration which should have been allowed.
    fixes: SDK-16446
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-16446
    Modified Paths:
    flex/sdk/branches/3.0.x/modules/asc/src/java/macromedia/asc/semantics/FlowAnalyzer.java

    pressh wrote:to not duplicate work I've already created a python script some time ago which you can use to build e17 pacman packages using the community PKGBUILDs: http://dev.archlinux.org/~ronald/e17.html
    I may extend its usage if someone sees any use for it. Either way, just thought I should drop it here.
    is that script any different from a full build through makepkg/yaourt using AUR's Pkgbuilds?
    I tried to use it but i get a list of errors similar to
    cp: impossibile creare il file normale `eina-build/eina/.svn/prop-base/NEWS.svn-
    base': Permission denied
    but if i can use yaourt, why not?
    Edit: sorry, i looked at the python source and realized that it actually just syncs abs and then runs makepkg and namcap for each package. so i guess i'll use yaourt instead (or try to understand why makepkg exits with that error)
    Last edited by pikiweb (2009-06-19 08:48:46)

  • How to publish infopath list form changes from one environment to another

    How can we move InfoPath customized list form changes from one environment to another example Development environment to UAT environment? We can save that as source file and update url on the .xsn file. But is there any other way we can do it?
    Rajasekar A.C

    Hi,
    You can save the list as template in source environment. Download the template for List Templates, upload in the same location in Destination site. The customized infopath should go with it. Let us know if that doesnt work.
    Regards, Kapil ***Please mark answer as Helpful or Answered after consideration***

  • Precautions i need to take when changing the Character set

    Hi,
    ORACLE VERSION: 10G Release 1 (10.1.0.3.0)
    I am going to change my database's characterset from AL32UTF8 to WE8MSWIN1252 character set and AL16UTF16 NCHAR character set. So i have few questions for you.
    1. What is the difference between Character Set and National Character set? Do i have to set both?
    2. What are precautions that i need to take while changing the characterset?
    3. What are JOB_QUEUE_PROCESSES and AQ_TM_PROCESSES parameters in Plain English? Why do i have to set these parameters to 0 as mentioned in this post below.
    Storing Chinese in Oracle Database

    1) The database character set controls (and specifies) the character set of CHAR & VARCHAR2 columns. The national character set controls the character set of NCHAR & NVARCHAR2 columns.
    2) Please make sure that you read the section of the Globalization manual that discusses character set migration. In particular, going from UTF-8 to Windows-1252 is going to require a bit more work since the latter is a subset (and not a strict binary subset) of the former.
    Justin

  • Access 2010 on 64 Bit Windows 7 Access "Not Responding" when changing from forms view to design view and back

    I am running
    Windows 7 64 bit
    Access 2010 32 bit
    Developing an application with a split FE BE with both files local but continue to have the message "Not Responding" when switching from forms view to design view and back as well as if I try to connect to a subform or object on the sub form.

    I have seen this behavior when the form's RecordSource is a complex query such as a crosstab or a query with several nested queries. To test if this is your case, remove the RecordSource and see if the form starts acting normal again.
    Then again, if the form has several subforms they might be slowing up the loading time.
    Bill Mosca
    www.thatlldoit.com
    http://tech.groups.yahoo.com/group/MS_Access_Professionals

  • Network problems are preventing connection to Exchange when changing from Ethernet to Wifi

    I have a user that connects to Exchange fine while their computer is docked and connected to the LAN by Ethernet, but once they undock they receive the error "Cannot open item. Network problems are preventing connection to Exchange server." They
    are connected to the internal company Wi-Fi and nothing changes about their computer's status other than changing from being on the wired network to wireless.

    Hi,
    What's your Outlook version and Exchange version? Outlook 2007 or Outlook 2010/2013? Please check your Wifi settings and make sure your Wifi password is correct.
    In Outlook, please click File > Account Settings > Security and
    make sure the Encrypt data between Microsoft
    Outlook and Microsoft Exchange is checked.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Tour not deleting messages when deleted from BES/Outlook

    I was hoping this annoying problem would go away when I upgraded from the World phone to the new Tour on Verizon.  Not so much.  It worked great after activating my BB with our corporate BES.  Now a day later when I delete a message in Outlook, it will not automatically delete on the BB so I have to delete everything twice.  I get all new messages syncronized on both, but deleting would be nice as well.  Any clues?  On the world phone, deleting would never work in both directions. i.e. delete on phone won't del in Outlook and vice versa.  At least with the Tour it does seem to delete in Outlook if I delete on the phone but not the other way around.  Thanks for the help.
    Patrick

    Is it a hard delete in outlook? (aka Shift Delete)
    If so look at this KB
    http://www.blackberry.com/btsc/KB04863
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Steps to take when a Windows-based database server changes domains

    For reasons beyond my control, my oracle 10 database servers, running Windows Server 2003 R2, have had their domain names changes. Oracle now does not work (none of the databases is addressable, the only error that gets thrown was a packet receive error).
    These are test boxes for the most part and so I am able to recreate the databases easily enough. I figured I would uninstall all of the Oracle bits and reinstall, assuming that this would reset the host name defaults. This did not work. After reinstalling, Oracle still thinks that the server name is "name.olddomain.mycompany.com" even though there is nothing in the registry or file system that I can find which uses the old domain name.
    Does anyone have suggestions for how to fully remove the oracle configuration from this machine so that it picks up the correct names upon reinstallation? I no longer have physical access to the box so if I can avoid having someone pave the OS, that would be most helpful.
    Thank you for any suggestions you might have.

    rocketrob wrote:
    It is actually all of the above issues. Enterprise Manager could not connect but I fixed that as you described. That done, client computers could not connect -- they were receiving 'packet receive errors'. The IP address and name of the machine changed, but I updated the tnsnames.ora files on both the server and the client, rebooted everything (just in case) and it still didn't work.
    My concerns over whether the services were using old domain accounts led me to try uninstalling Oracle. I uninstalled, restarted and then reinstalled. Once reinstalled, I created a quick database and found that it was created with the old domain name for some reason.
    I did notice that the listener service seemed to start and then stop but I have not investigated that aspect of it yet at all.
    Since I have uninstalled Oracle again on this one machine, I am going to look for any and all traces of oracle in the registry and on the disk and try removing them before reinstalling again.
    Thanks for any further help you can provide.I suggest that you have all of the services related to Oracle running using the SYSTEM account, rather than a specific domain account - that could eliminate some of the problems you are experiencing. The listener service starting and stopping is a critical clue - it probably points to a problem with the listener.ora file. Take, for example, this listener.ora file:
    TRACE_LEVEL_LISTENER = 0
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (GLOBAL_DBNAME = OR10)
          (ORACLE_HOME = C:\oracle\product\10.2.0)
          (SID_NAME = OR10)
        (SID_DESC =
          (GLOBAL_DBNAME = LT)
          (ORACLE_HOME = C:\oracle\product\10.2.0)
          (SID_NAME = LT)
        (SID_DESC =
          (GLOBAL_DBNAME = OR11)
          (ORACLE_HOME = C:\Oracle\Product\11.1.0)
          (SID_NAME = OR11)
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = TCP)(HOST = AIRFORCE_2)(PORT = 1521))
    SAVE_CONFIG_ON_STOP_LISTENER = TRUENote in the above in the LISTENER = section that there is a HOST = entry, in this case specifying AIRFORCE_2. AIRFORCE_2, because it contains an _ character, is not DNS compliant and will cause issues with Enterprise Manager Database Control. If the listener.ora file specified AIRFORCE_2.myolddomain.com, and the domain name was changed to myNEWdomain.com, the listener will fail to start (or will stop immediately) unless this section is changed. If instead of a computer name an IP address was listed, for example 192.10.1.78, and the IP address of the computer changed to 192.100.50.20, the listener will fail to start (or will stop immediately) unless this section is changed.
    It is good that you caught the changes needed in the tnsname.ora. Without the listener service running, the clients will not be able to connect to the database instance.
    Charles Hooper
    IT Manager/Oracle DBA
    K&M Machine-Fabricating, Inc.

  • STEPS TO TAKE WHEN SELLING IPOD TOUCH

    i aqm about to put my touch up for sale ,when i get a perspective buyer what steps do ineed to take ie, unregistering and what do i need to do to delete personal info etc and back up for my new ipod touch, also can i transver exstended warranty over many thanks ROY

    Hello Tugmaster,
    First you should restore the iPod via iTunes. This will erase all data from the iPod and set it back to its original default settings. For instructions on how to do this, see this Apple support document.
    http://support.apple.com/kb/ht1414
    As for the warranty, see this article for more.
    http://www.apple.com/support/products/faqs.html
    B-rock

  • Clearing Form when changing from Insert Mode to Enter/Execute Query

    Morning folks,
    I need some help or pointers with a form I am working on. At startup, the form is in Insert mode. I am using Oracle Forms 9i.
    Goal: Clear the form with NO_VALIDATE when User enters an ID in Insert mode and clicks on the Execute Query button(DEFAULT&SMARTBAR Inbuilt Menu)
    The user can do two things when they first open the screen.
    Option 1: Enter the STUDENT_ID and press Tab
    Option 2: Enter the STUDENT_ID and press the Execute Query button (Part of the DEFAULT&SMARTBAR Inbuilt Menu)
    There is a When-Validate-Item trigger on STUDENT_ID to check if the Student ID already exists in the database. If it does, it gives an Error message saying "Student ID found. Please Query the record or enter a new Student ID". This is fine with Option 1.
    The problem arises with Option 2. When I Enter a Student ID in Insert Mode and (thinking I am in Enter Query mode) and press the Execute Query button, I get two messages:
    Message 1: "Student ID found. Please Query the record or enter a new Student ID"
    Message 2: Oracle message "Do you want to save the changes? Yes/No/Cancel.
    Is there a way to stop this *Message 2?*
    Here is what I have done to try and mitigate this situation. I have created a non database field and have called it clear_form.
    In When-Validate-Item I set the field clear_form = 1 when I encounter *Message 1*
    {code}
    if t_record_exists > 0 then
    set_alert_property('ALERT_ERROR',ALERT_MESSAGE_TEXT,'Student ID found. Please Query the record or enter a new Student ID');
    alert_button := show_alert('ALERT_ERROR');
    :clear_form := 1;
    end if;
    {code}
    By creating *Key-EXEQRY* Trigger at Form Level, I was hoping that it would just clear the form. I put some messages and its seems to me that *KEY-EXEQRY* is firing first and then the *WHEN-VALIDATE-ITEM*. Is there a way to have the *WHEN-VALIDATE-ITEM* trigger fire first?
    {code}
    if :clear_form is null then
    execute_query;
    else
    clear_form(no_validate);
    end if;
    {code}
    Thanks!
    Edited by: Roxyrollers on Sep 28, 2012 8:50 AM
    Edited by: Roxyrollers on Sep 28, 2012 9:45 AM

    Having the actual Student_ID column from the table is dangerous, since it is also the key to the student's data. What if the user properly executes a query, showing a student's data, and then wants to look up another student, so keys in the new ID. If he then presses Execute Query, the Form asks "Do you want to save your changes?"
    If the user presses Yes, the new ID becomes the previous student's key.
    It would be better if you put the student_ID field in a control block. Then, the user enters a Student_ID, and presses Execute Query, the query then populates the student's data in the Base Table block. In the B_T block, the actual Student_ID column should be hidden.

  • IOS 8 Mail share sheet crash when changing From address

    Since upgrading to iOS 8 I've experienced a repeated crash when I try to email content from a secondary (non-default) email account using share sheets. For instance:
    I'm in the NYTimes app and I hit the share button
    I select Mail
    a draft email comes up with the article that I want to share
    I change the From address to a secondary email account set up in iOS 8 and the draft email crashes, kicking me back to the NYTimes app
    This has happened every time I try to change the From address in the Mail share extension on iOS 8. I'm now running 8.1.1 and it's still happening. I even tried deleting the secondary email account and reinstalling it but I'm still getting the crash.
    Is this happening to anyone else and is there a fix?
    thanks!

    I've got 4 accounts. iCloud is the default but also an Exchange (Work), Outlook and Gmail. It crashes when I change to any of them from the default iCloud.
    What also doesn't help is iOS is smart enough to switch accounts automatically depending on who you email so if I pick someone at work, it automatically changes to Exchange and crashes. So I cannot even email those people from my iCloud account via the share sheet.
    I'm stuck having to copy everything and paste into the normal email application is quite a pain. I'm surprised more people aren't compaining about this or Apple isn't bothering to fix it quickly. I've even fully wiped my phone once and not restored the backup but it still doesn't work so it's clearly an OS bug. This worked fine on iOS 7.

  • Treo 680 on Vista - Sync trouble when changing from Beta to new system! Help!

    I have had my Treo 680 for about a year now. When I got it I found that the wonderful people at Palm never configured it to ruhn on Vista which had already been around for about 2 years at the time. Consequently, I never could use all the features ( certain media, etc.) because I had to run the Beta system. Additionally, the people at Palm told me when I called last year that the error messages I get after syncing were just something I'd have to get used to.
    Fast forward to today. I go to the Palm site and I see that Beta has been replaced by a system that works with Vista. As I write this right now, I am in the process of syncing and it is stuck on " sycronizing Date Book". I have already tried reinstalling the new Vista version and re syncing again. What should I do to get this thing to work. For five cents, I'd go buy a new G phone from T Mobile and just switch over via importing data to Outlook which I currently don't use and the be done with Palm, ... but I can't even do that because I can't sync the Palm unit anymore with my PC!!!  Any help is appreciated.   
    Post relates to: Treo 680 (Unlocked GSM)

    DbFixIt is a database scan and repair program that can be found by doing a google seach and clicking on the first result that appears. It's made by Pimlico and after you down load the trial. You'll need to install it to the device. Unzip it and then double click the .prc file. You should get a message that it will be install during the next sync. Then you need to disable the Calendar conduit. Right click the hotsync icon just the the left of your computer clock. Goto settings, the Applications. Locate Datebook or Calendar (Or both) And uncheck them.
    Then try to sync. This will install the program on the device if the sync completes. Locate the program on the 680 and open it. Once it opens click the top left hand corner and select Delete Calendar blobs. Once that's done you can run the Easy scan, it should tell you what calendar events are 'bad'. Then you can fix them manually. If you want to program to fix them automatically then you'll need to buy it.  
    Post relates to: None

Maybe you are looking for