Advice on Type of Mapping

Hi Friends,
I have scenerio like this,
IDOCS will be collected in BPM for 10 mins and them output will be in XML file which has details of all collected IDOCS.
Output will be like this
<Message list>
Message
</Message list>.
I have many more feilds with in Message.
If BPM collects 4 IDOCS out of which 3 are USD and 1GBP.
I nedd 2 Message tabs inside <Message list> with Idocs description in side message.
Is it possible by Graphical mapping..
Will be help full if u can send me some blogs.
Thanks in advance.....

HI,
What is the output format ? Is it File ? If so , for each currency you need to generate a new file ? If this is the requirement,. just split the messages using Transformation Step and send to different files based on the USD/GBP.
This can be done after N:1 Transformation Step and also this split can be done outside the BPM..with Graphical Mapping
IF you want both the data in the same file, then what is the purpose of separate tag...
Btw, all depends on the requirements, based on the complexity of the mapping, you can go other mappings like Java, XSLT etc. But in this case I feel Graphical Mapping is ok
rgds,
Moorthy

Similar Messages

Seeburger help required for 810 and Dispatch Advice (IDOC type DESADV).

Hi All,
1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
--- Seeburger Workbench
--- Seeburger Mapping Designer (BIC)
--- Seeburger Counter and Varaibles
--- Seeburger AS2 Spoke
--- Any other Seeburger Component setting required
I have understand blog for 850 -- /people/rajeshkumar.pasupula/blog/2009/08/05/wanna-implement-seeburger-for-edi-find-the-booster
2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
Regards

Hi Rickkk,
1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
--- Seeburger Workbench
--- Seeburger Mapping Designer (BIC)
--- Seeburger Counter and Varaibles
--- Seeburger AS2 Spoke
--- Any other Seeburger Component setting required
For SEEBURGER workbench please go through this blog and navigate the enbebbed links furthur to know about Seeburger workbench too.
/people/prateek.srivastava3/blog/2009/08/01/seeburger--part-1--the-basics
2
2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
For 810 i think the procedure would be the same but themseeburger mapping program that validates the ANSX 810 would be different.As far as 997is concerned 997 is a functional acknowledgement.Its a genric format that is used to send acknowledgement for any EDI transaction set that has been sent.
3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
The logic will be based on the trading partner guidelines which will contain the description of all the semantic and syntactiic description about the segments ,its feilds.we need to consider the guidelines and target side specifications too while mapping.
Thanks,
Ram.

Different types of Mapping in XI

Hi All,
I am new to XI, I know different types of Mapping in XI.
when we are using this mapping?
1. Graphical Mapping
2. Java Mapping
3. XSLT Mapping and
4. ABAP Mapping
Please give detail.. it's helpful to me...
Thanks & Regards
SReddy,

Hi Reddy,
I thought i will start of from scratch.Mapping is basically done to convert one form of xml into another form. This can be done using either of them mentioned below.
- Graphical mapping
- XSLT mapping
- JAVA mapping
- ABAP mapping
To know more about each of them please go thru the following links. And if you ask me your which is better, it depends basically on the scenario you implementing and the complexity involved. Anyways please go thru the following links:
Graphical mapping
/people/bhanu.thirumala/blog/2006/02/02/graphical-message-mapping-150-text-preview
http://www.sapgenie.com/netweaver/xi/mapping1.htm
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
XSLT mapping
http://help.sap.com/saphelp_nw04/helpdata/en/73/f61eea1741453eb8f794e150067930/content.htm
JAVA mapping
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/content.htm
ABAP mapping
/people/r.eijpe/blog
To know more about the value mapping tools for the SAP Exchange Infrastructure (XI), please go thru the following link:
http://www.applicon.dk/fileadmin/filer/XI_Tools/ValueMappingTool.pdf
To get an idea as to what value mapping is, please go thru the following links:
http://help.sap.com/saphelp_nw04/helpdata/en/13/ba20dd7beb14438bc7b04b5b6ca300/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f2/dfae3d47afd652e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/content.htm
most of the links that I have provided also helps you get the step by step procedure of doing the same. And also involves the procedure to implement certain advanced features.
Hope this clears your doubt fully.
Regards,
Abhy
PS: AWARD POINTS FOR HELPUL ANSWERS.

IPhone 6 Plus 16GB blue screen crashes: Read, error type:Address map hole or size mis-match

Hi folks,
Some time ago I had a 16GB 6+ and it crashed with the blue screen, so I returned it. I now have a brand new one that I got from Tmobile ($75 return fee) and although it has mostly worked just fine, I have gotten 2 blue screen crashes. Below are the details from the phone's log.
What strikes me is the message "Read, error type:Address map hole or size mis-match".
Does anyone know if this could be caused by a hardware defect?
I've gotten one of these crashes running iOS 8.1.2 and another in 8.1.3.
Thanks.
Incident Identifier: 20304759-E90B-453F-BDC5-176AF4E30041
CrashReporter Key:   fcf18d230005749957728546dea3221a0c588330
Hardware Model:      iPhone7,1
Date/Time:           2015-01-25 19:43:44.913 -0800
OS Version:          iOS 8.1.2 (12B440)
panic(cpu 0 caller 0xffffff8008cd45d0): L2C PIO error (src:core0-AF snoop, address:0x1202030208, access:Read, error type:Address map hole or size mis-match, L2C_ERR_STS:100003fc00000202, L2C_ERR_ADR:0x1108e1202030208, L2C_ERR_INF:0x2107)
Debugger message: panic
OS version: 12B440
Kernel version: Darwin Kernel Version 14.0.0: Mon Nov 3 22:27:30 PST 2014; root:xnu-2783.3.22~1/RELEASE_ARM64_T7000
iBoot version: iBoot-2261.3.33
secure boot?: YES
Paniclog version: 3
Kernel slide:     0x0000000006000000
Kernel text base: 0xffffff8008002000
Epoch Time:        sec       usec
Boot    : 0x54bc22ef 0x00000000
Sleep   : 0x54c58398 0x0002abb4
Wake    : 0x54c583ae 0x000f08df
Calendar: 0x54c5b7e3 0x00025045

same with my iPhone 4s 16gb
{"os_version":"iOS 8.1.3 (12B466)","bug_type":"110"}
Incident Identifier: 582496DB-6999-468C-9504-3D1C191B9F4B
CrashReporter Key: 623a577555e51ed110b937358adfa66fba3ea447
Hardware Model: iPhone4,1
Date/Time: 2015-02-20 04:17:50.830 +0300
OS Version: iOS 8.1.3 (12B466)
panic(cpu 0 caller 0x83dc8347): "i2c1::_checkBusStatus Bus is still in a bad state; last write status 00010110 xfer 00000000 fifo 00000000 for device als"
Debugger message: panic
OS version: 12B466
Kernel version: Darwin Kernel Version 14.0.0: Mon Jan 12 21:30:11 PST 2015; root:xnu-2783.3.26~3/RELEASE_ARM_S5L8940X
Kernel slide: 0x0000000003400000
Kernel text base: 0x83401000
Boot : 0x54e68884 0x00000000
Sleep : 0x54e68a7e 0x000dd6ac
Wake : 0x54e68b19 0x00035c02
Calendar: 0x54e68b1d 0x00040927
Panicked task 0x84a87c60: 13773 pages, 122 threads: pid 0: kernel_task
panicked thread: 0xc5066e80, backtrace: 0x81a33ca0
0x834ad94d
0x834adcb1
0x8341d5bd
0x83dc8347
0x83dc8059
0x83dc7e35
0x8389c601
0x8389c513
0x836f6f65
0x8389cc6d
0x8389ccc5
0x83a9f18d
0x83a9c27f
0x83a9c73f
0x83a9c90d
0x836f6f65
0x83a9c8e5
0x836e91e7
0x8343ed9b
0x834ab59c
Task 0x84a87c60: 13773 pages, 122 threads: pid 0: kernel_task
Task 0x84a87948: 771 pages, 3 threads: pid 1: launchd
Task 0x84a87000: 2016 pages, 13 threads: pid 17: UserEventAgent
Task 0x84a87630: 481 pages, 4 threads: pid 18: misd
Task 0x84a87318: 4114 pages, 22 threads: pid 19: CommCenter
Task 0x87a62948: 349 pages, 2 threads: pid 21: keybagd
Task 0x87a62318: 574 pages, 4 threads: pid 23: iaptransportd
Task 0x87a62000: 868 pages, 9 threads: pid 24: configd
Task 0x87a7ac60: 793 pages, 4 threads: pid 25: lockdownd
Task 0x87a7a948: 1218 pages, 6 threads: pid 26: imagent
Task 0x87a7a630: 2771 pages, 4 threads: pid 27: atc
Task 0x87a7a318: 792 pages, 2 threads: pid 28: fairplayd.H1
Task 0x87a7a000: 1571 pages, 14 threads: pid 29: aggregated
Task 0x87c4ac60: 1069 pages, 4 threads: pid 30: routined
Task 0x87c4a318: 707 pages, 5 threads: pid 33: timed
Task 0x87d23c60: 646 pages, 2 threads: pid 35: installd
Task 0x87d23948: 2383 pages, 11 threads: pid 36: mediaserverd
Task 0x87d23318: 1279 pages, 11 threads: pid 38: ubd
Task 0x87d23000: 249 pages, 7 threads: pid 39: syslogd
Task 0x87d6ac60: 410 pages, 2 threads: pid 40: softwareupdated
Task 0x87d6a948: 851 pages, 5 threads: pid 41: mediaremoted
Task 0x87d6a630: 1877 pages, 7 threads: pid 42: identityservices
Task 0x87d6a318: 9938 pages, 16 threads: pid 43: SpringBoard
Task 0x87d6a000: 453 pages, 2 threads: pid 44: fileproviderd
Task 0x87e25c60: 609 pages, 4 threads: p

Quastion about type conversion mapping

What does the type convertion mapping serve for in jdeveloper 10g?
Cant find any meaningful examples.
I think it sould be used for escaping java coding if it is necessarily to change automatically generated data types...or to supply some specific format like to_char function in sql... But it seems that neither functionallity is supporteds
Thanks. Alex

There is some more current info here:
http://wiki.eclipse.org/Introduction_to_Mappings_(ELUG)#Type_Conversion_Converter
But this is for the TypeConversionConverter in EclipseLink, which is mostly the same (the TypeConversionMapping in 9.0.4 became the TypeConversionConverter in 10.1.3).
It is basically to handle converting from one type in Java such as Calendar to another type in the database, say DATE or even VARCHAR, etc. It can handle most obvious conversions. Many conversions will also work without a converter, or at least work most of the time depending on if the database auto converters types, but some databases are more picking on the type that is bound matching the field type.
James : http://www.eclipselink.org

Different types of mapping

What are the advantages and under what circumstances do we need to use each one of them?

Hello Sonia,
Depends upon u r requirement u have to choose which mapping is suitable..
In Real Time out most of our requirements through graphical mappings only.
Diffarent types of Mapping's....
1) MESSAGE MAPPING
2 ) ABAP MAPPING
3 ) JAVA MAPPING
4 ) XSLT MAPPING
Message Mapping:
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
Java Mapping :
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=java+mapping&adv=false&sortby=cm_rnd_rankvalue#
SAP Network Blog: Implementing a Java Mapping in SAP PI
/people/carlosivan.prietorubio/blog/2007/12/21/implementing-a-java-mapping-in-sap-pi
Java Mapping (SAP Library - Partner Connectivity Kit)
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/frameset.htm
SAP Network Blog: XI Java Mapping Helper (DOM)
/people/alessandro.guarneri/blog/2007/03/25/xi-java-mapping-helper-dom
SAP Network Blog: Testing and Debugging Java Mapping
/people/stefan.grube/blog/2006/10/23/testing-and-debugging-java-mapping-in-developer-studio
Binary Conversion in XI - Java Mapping - Code Gallery - Wiki
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/binary%2bconversion%2bin%2bxi%2b-%2bjava%2bmapping
SAP Network Blog: "JAVA MAPPING", an alternate way of reading a CSV file
/people/rahul.nawale2/blog/2006/07/18/java-mapping-an-alternate-way-of-reading-a-csv-file
ABAP mappings run on ABAP Stack and are developed in the ABAP workbench of the Integration Server.
You normally do not need to use the ABAP mappings and is preferable for someone with ABAP programming background. I should say JAVA functions would suffice any complex scenarios.
refer step by step guides for ABAP Mapping
ABAP Mapping:
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=abap+mapping&adv=false&sortby=cm_rnd_rankvalue#
How to Use ABAP Mapping in Exchange Infrastructure 3.0 (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
SAP Network Blog: Testing ABAP Mapping
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
SAP Network Blog: How to call XI ABAP Mapping via RFC
/people/ricardoandres.maienza/blog/2007/04/06/how-to-call-xi-abap-mapping-via-rfc
SAP Network Blog: XI: ABAP mapping logs - more standard = better visibility
/people/michal.krawczyk2/blog/2006/09/20/xi-abap-mapping-logs--more-standard-better-visibility
SAP Network Blog: Dynamically sending a mail to the PO creator using XSLT- ABAP Mapping
/people/rahul.nawale2/blog/2006/11/01/dynamically-sending-a-mail-to-the-po-creator-using-xslt-abap-mapping
You need to provide the name of your mapping program maually , you see it is an input box.
XSLT Mapping..
http://help.sap.com/saphelp_nw04/helpdata/en/83/2200cb50d345c793336d9a1683163e/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/83/2200cb50d345c793336d9a1683163e/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/b78d406b305537e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/4c/b2ad3de2d76b3be10000000a114084/frameset.htm
Thanks,
Satya Kumar
Reward Points if it is useful..

Different types of mapping techics

hi expects,
please provide some mapping technics.

Rohit,
It depends upon the requirements. So after going through your requirements you will decide which type of mapping you want to use. Subsequently you will develop the mapping.
Check this threads for different types of mappings and their advantages and disadvantages:
Differences between the Mapping types.
Re: Types of Mappings and their Use
---Satish

Advantages/disadvantages,Capabilities,Failures of Types of mapping

Dear all,
Can you kindly explain me the Advantages/disadvantages,Capabilities,Failures of Types of mapping.
what is the parser XSLT uses.
what is differnece between sax/dom parsers.
Thanks,
Srinivasa

Hi srinivas phani ,
The following websites give u good documentation on Mapping:
Excellent PDF Document on Mapping
http://help.sap.com/bp_bpmv130/Documentation/Operation/MappingXI30.pdf
Mapping Development with the ABAP Workbench
http://help.sap.com/saphelp_nw04/helpdata/en/10/5abb2d9df242f6a62e22e027a6c382/content.htm
ABAP Mappings
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm
how to create a flat file out of an IDoc-XML by means of an ABAP mapping program and the J2EE File Adapter.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
How to Use ABAP Mapping in XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
SAXParser
Both DOM and SAX approaches have advantages and disadvantages, and your choice of technique must depend on the type of data being parsed, the requirements of your application, and the constraints under which you are operating.
The SAX approach is linear: It processes XML structures as it finds them, generating events and leaving the event handlers to decide what to do with each structure. The advantage of this approach is that it is resource-friendly; because SAX does not build a tree representation of the document in memory, it can parse XML data in chunks, processing large amounts of data with very little impact on memory. This also translates into better performance; if your document structure is simple, and the event handlers don't have anything too complicated to do, SAX-based applications will generally offer a speed advantage over DOM-based ones.
The downside, though, is an inability to move around the document in a non- linear manner. SAX does not maintain any internal record of the relationships between the different nodes of an XML document (as the DOM does), making it difficult to create customized node collections or to traverse the document in a non-sequential manner. The only way around this with SAX is to create your own custom object model, and map the document elements into your own custom structuresa process that adds to complexity and can possibly degrade performance.
Where SAX flounders, though, the DOM shines. The DOM creates a tree representation of the document in memory, making it possible to easily travel from one node to another, or even access the same node repeatedly (again, not something you can do easily in SAX). This tree representation is based on a standard, easy-to-understand model, making it easier to write code to interact with it.
This flexibility does, however, come with an important caveat. Because the DOM builds a tree in memory, DOM processing cannot begin until the document has been fully parsed (SAX, on the other hand, can begin parsing a document even if it's not all available immediately). This reduces a developer's ability to "manage" the parsing process by feeding data to the parser in chunks, and also implies greater memory consumption and consequent performance degradation.
Consequently, the choice of technique depends significantly on the type of constraints the application will be performing under, and the type of processing it will be expected to carry out. For systems with limited memory, SAX is a far more efficient approach. On the other hand, complex data-processing requirements can benefit from the standard object model and API of the DOM.
After using DOM to parse XML documents for any length of time, you will probably begin to notice that performance tends to suffer when youre dealing with large documents. This problem is endemic to DOM's tree-based structure: larger trees demand more memory, and DOM must load an entire document into memory before it can allow you to parse it. For situations where performance is problematic with DOM, you have an alternative in the Simple API for XML (SAX). In this fifth installment in our Remedial XML series, I'll introduce you to the SAX API, and provide some links to SAX implementations in several different languages.
Further differences can be seen in the following websites
http://articles.techrepublic.com.com/5100-22-1044823.html
Parsing XML Efficiently : DOM Parsing ,SAX Parsing
http://www.oracle.com/technology/oramag/oracle/03-sep/o53devxml.html
SAX Example
http://www.informit.com/articles/article.aspx?p=26351&seqNum=6&rl=1
Event or DOM parsing?
http://discuss.joelonsoftware.com/default.asp?design.4.156750.12
SAX samples
http://xerces.apache.org/xerces2-j/samples-sax.html
Set up a SAX parser
http://www.ibm.com/developerworks/xml/library/x-tipsaxp.html
Simple API for XML (SAX)
http://en.wikipedia.org/wiki/Simple_API_for_XML
SAX Parser Benchmarks
http://piccolo.sourceforge.net/bench.html
XML Parsers: DOM and SAX Put to the Test
http://www.devx.com/xml/Article/16922/1954?pf=true
High-Performance XML Parsing With SAX
http://www.xml.com/pub/a/2001/02/14/perlsax.html
Using the SAX Parser
http://www.javacommerce.com/displaypage.jsp?name=saxparser1.sql&id=18232
Class SAXParser
http://java.sun.com/j2se/1.4.2/docs/api/javax/xml/parsers/SAXParser.html
Class SAXParser
http://people.apache.org/~andyc/neko/doc/html/javadoc/org/cyberneko/html/parsers/SAXParser.html
SAX Parsers
http://webdesign.about.com/od/saxparsers/SAX_Parsers.htm
Interface SAXParser
http://excalibur.apache.org/apidocs/org/apache/excalibur/xml/sax/SAXParser.html
Class SAXParser
http://xerces.apache.org/xerces2-j/javadocs/xerces2/org/apache/xerces/parsers/SAXParser.html
DOM Parsing
Excellent website showing how 2 use Document Object Model (DOM)
http://www.w3.org/DOM/
Document Object Model (DOM) Parsing
http://www.xml.com/lpt/a/1597
Overview of DOM, DOM Level 3 core,DOM Level 3 Load & Save
http://www.softwaresummit.com/2004/speakers/GrahamJAXP1.pdf
Sample java program using DOM
http://mail-archives.apache.org/mod_mbox/cocoon-cvs/200305.mbox/%[email protected]%3Eorg/mod_mbox/cocoon-cvs/200305.mbox/%[email protected]%3E
Easy RFC lookup from XSLT mappings using a Java helper class
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14
XML Transformation Using the TrAX APIs in JAXP
http://www.xml.com/pub/a/2005/07/06/jaxp.html?page=last
cheers!
gyanaraj
****Pls reward points if u find this helpful

Types of Mapping XI supports

Choose the true about types of mapping XI supports
a. Structure Mapping
b. Node mapping
c. Value Mapping
d. Functional Mapping
i guess it supports all of those mappings specified..
iam i right on this??

Guys -
I am a novice to XI. But, I guess as per my understanding this is what I think. Please advis me if you have better opinion that would justify this answer in certifrication.
XI by definition supports only the following 4 mappings types:
Message (Graphical), XSLT, JAVA & ABAP
However, first in Element cardinality addresses something called NODE MAPPING which describes as follows:
Mapping of Non Mandatory Nodes (minOccurs=0)
====================================
1. If a non mandatory node contains elements with minOccurs>0, these elements becomes mandatory after their parent node is assigned
2. Assignment of element is not sufficient
3. Node has to be 'created' by assigning a suitable source node/element
Therefore, as per this discription, I believe NODE mapping a valid for CERTIFICATION
Secondly, as per my understanding of message mapping, we map source and target STRUCTURES here. Does not this mean STRUCTURE MAPPING? Please confirm?
Thirdly, You experts all must have done Value Mappings in your projects and there is no need for me to describe more about it. Can not we consider this as a valid answer for CERTIFICATION?
Last but not least FUNCTIONAL MAPPING; I am not sure why this option is here? May be this is just to add confusion. On the otherside, it make sense if we consider including functions (both standard and user-defined) in our mapping. Does this make sense being a valid Mapping at all?
In other words, let me ask you all experts; Is this a direct or indirect question? If it is direct then we should turn down all the options. If indirect, may the first 3 are correct or all four.
Therefore, I rely on your guys for you input. Please provide your valuble analysis.
Thanks

@XmlAttribute/@XmlValue need to reference a Java type that maps to text

Hi,
I get this exception when marshalling with xjc (either 2.0.1 or 2.1.3) generated classes. The xsd looks like this:
<xs:complexType name="ExtensionType">
     <xs:simpleContent>
          <xs:extension base="xs:anySimpleType">
               <xs:attribute name="nombre" use="required">
                    <xs:simpleType>
                         <xs:restriction base="xs:string">
                              <xs:maxLength value="50"/>
                         </xs:restriction>
                    </xs:simpleType>
               </xs:attribute>
               <xs:attribute name="tipo" use="optional">
                    <xs:simpleType>
                         <xs:restriction base="xs:string">
                              <xs:minLength value="0"/>
                              <xs:maxLength value="30"/>
                         </xs:restriction>
                    </xs:simpleType>
               </xs:attribute>
               <xs:attribute name="id" use="optional">
                    <xs:simpleType>
                         <xs:restriction base="xs:string">
                              <xs:minLength value="0"/>
                         </xs:restriction>
                    </xs:simpleType>
               </xs:attribute>
          </xs:extension>
     </xs:simpleContent>
</xs:complexType>and the generated class looks like
public class ExtensionType {
    @XmlValue
    protected Object value;
    @XmlAttribute
    protected String id;
    @XmlAttribute(required = true)
    protected String nombre;
    @XmlAttribute
    protected String tipo;
}If I change value's type to String I don't get the error any more. I've tried some binding customizations, but without luck.
Any hints on how to a) customize de binding or b) modify the schema so that jaxb doesn't choke on xjc's bindings?
tks

I am running into the same problem. I need an @XmlValue to be an Object (xs:anyType). Here are the basic annotations:
@XmlAccessorType(XmlAccessType.FIELD)
@XmlType(name = "argument")
public class Argument {
    @XmlAttribute(name = "type")
    protected String type;
    @XmlValue
    protected Object value;
}The desired output is as follows:
<argument type="arg1.type" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema" xsi:type="xs:string">
    test
</argument>However, I am getting the same exception: "@XmlAttribute/@XmlValue need to reference a Java type that maps to text in XML." when attempting to marshal.
Any suggestions would be appreciated.

Data Type, Message Type and Mapping for FTP

Thanks in advance for your replies.
As our first production XI scenario, we need to move several (at least 46) files from our SAP instance to a couple of different servers to support our legacy systems. Once all locations are on SAP this requirement should go away.
I only want to pick up the file from the one server and place it on the other and this leads me to some questions.
How do I define the Data Type and Message Type for each of the files? Do I need to consider the size of the record in each interface and create DT/MT with different sizes.
Do I need a mapping program that simply maps one structure to the other?

I recently completed a similar exercise.
It looks like this...
server1 ftp (Sender - delete file) - XI - Server2 ftp (receiver - create file). This will move the file from one server to another.
I used the same schema and mapped fields on a one to one basis.
The Size of the files I process are between 6kb and 500kb each, but the mapping/fields remain constant, just the numebr of items change.
Worked seemelessly for the last three weeks (since go-live)

Types of Mapping

Hi Masters,
I have Small Dought..
We have 4 Type of Mappings,
<b>Genera Message Mapping, JAVA Mapping, XSLP Mapping and ABAP Mapping...
</b>
<b>My Dought is ...In which Scenarios we are using this all mappings....</b>
Please give me Clear Idea...
Regards,
SReddy

Hi,
I thought i will start of from scratch.Mapping is basically done to convert one form of xml into another form. This can be done using either of them mentioned below.
- Graphical mapping
- XSLT mapping
- JAVA mapping
- ABAP mapping
There is no hard and fast rule for using the mapping techniques. But, I will try to put things in the right perspective for you.
Graphical Mapping is used for simple mapping cases. When, the logic for your mapping is simple and straight forward and it does not involve any complex logic.
Java and XSLT mapping are used when graphical mapping cannot help you.
When the choice is between Java And XSLT, XSLT is simpler than java mapping and easier. But, it has its drawbacks. One among them being that you cannot use Java APIs and Classes in it. There might be cases in your mapping when you will have to perfrom something like a properties file look up or a DB lookup, such scenarios are not possible in XSLT and so, when you want to use some specific Java API's you will have to go for Java Mapping.
Java Mapping uses 2 types of parsers. DOM and SAX. DOM is easier to use with lots of classes to help you create nodes and elements, but , DOM is very processor intensive.
SAX parser is something that parses your XML one after the other, and so is not processor intensive. But, it is not exaclty easy to develop either.
To know more about each of them please go thru the following links. And if you ask me your which is better, it depends basically on the scenario you implementing and the complexity involved. Anyways please go thru the following links:
Graphical mapping
http://help.sap.com/saphelp_nw04/helpdata/en/6d/aadd3e6ecb1f39e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/c4cdfc334824478090739c04c4a249/content.htm
/people/bhanu.thirumala/blog/2006/02/02/graphical-message-mapping-150-text-preview
http://www.sapgenie.com/netweaver/xi/mapping1.htm
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
XSLT mapping
http://help.sap.com/saphelp_nw04/helpdata/en/73/f61eea1741453eb8f794e150067930/content.htm
http://www.w3.org/TR/xslt20/
JAVA mapping
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/content.htm
http://java.sun.com/j2se/1.4.2/docs/api/org/w3c/dom/package-frame.html
ABAP mapping
/people/r.eijpe/blog
To know more about the value mapping tools for the SAP Exchange Infrastructure (XI), please go thru the following link:
http://www.applicon.dk/fileadmin/filer/XI_Tools/ValueMappingTool.pdf
To get an idea as to what value mapping is, please go thru the following links:
http://help.sap.com/saphelp_nw04/helpdata/en/13/ba20dd7beb14438bc7b04b5b6ca300/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f2/dfae3d47afd652e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/content.htm
most of the links that I have provided also helps you get the step by step procedure of doing the same. And also involves the procedure to implement certain advanced features.
Hope this clears your doubt fully.
Regards,
Abhy

Problems with using wsld defined types in mapping

Hi,
I want to call a web service from XI.
I imported the wsdl of the web service as "External Definitions". The complex types are stored in xsd files referenced in "External References".
In "Message Interface", I set the "Input message" as "External message".
Then I want to create a "Message mapping" between the outbound message type and the inbound one I created, but when I choose the one from "External definition", no dataType appears to do the mapping.
Is it link to the fact the types used in the wsdl are defined in xsd files?
Regards
Yann

Hi,
Have you followed the principle given in this URL at the end for creating your external definition?
http://help.sap.com/saphelp_nw04/helpdata/en/26/9e97b0f525d743882936c2d6f375c7/content.htm
Regards
Vijaya

Payment Advice Account Type

Hi,
I want to ask when should the Account Type be set to S (GL Account) when creating a payment advice using transaction FBE1.
Thanks

Hi,
Payment advice notes with the G/L account account type are producedwithin manual clearing processing for a G/L account if the currentprocessing status is noted as the payment advice. The processing canthen be continued later with reference to the payment advice number.
Aravind

Container type massage mapping in PI

Hi,
I am facing issue in message mapping. I am new in the XI.
In the source XSD, One Container Structure is their of 1...1 cardinality and type structure. inside this container structure one more container with 1...unbounded cardinality. Fields are not visible in this container.
Hoe to map fields to the inside structure.

Hi Ranj,
You can map the Container structure either one to one or based on the requirement to the target structure field which needs to be populated based on the occurence of the Container node from the Source. Also not quite sure of the below . Please clarify:
Fields are not visible in this container.
Hoe to map fields to the inside structure.
Please refer to the attached link for further details on Basics of message mapping. Let me know in case you need further help.
Mapping Concepts in SAP XI - Process Integration - SCN Wiki
Regards,
Sriram

Advice on Type of Mapping

Similar Messages

Maybe you are looking for