Advice on upgradation of Hyperion components

Hello All,
I am planning to upgrade EIS from 9.3.1.0.00 to 9.3.1.5.00(installing the service pack). Should I upgrade other components(HSS, AAS & Essbase) also from 9.3.1.0.00 to 9.3.1.5.00
Please advice. Thanks in advance
Regards,
Sudhir

Yes if you are updating one component, it is best to upgrade everything to be in sync. While it is possible to upgrade parts, its better to do the whole thing

Similar Messages

TS4009 I had an advice to upgrade 5 apps i already have on my ipad. I clicked to upgrade them all, but they are all in "waiting" and jammed.could someone tell me how to solve this problem iI have since i downloaded iclous

I had an advice to upgrade 5 apps i already have in my ipad.
I clicked to upgrade them alltogether but they all jammed.
Each icon shows "in waiting" since I installed Icloud, I have this kind of problems.
Hope someone can help me.
thanks.
Paul

ok,
At this little tutorial here:
http://www.developer.com/tech/article.php/610011
It says
"The Document interface is the content model for Swing text components. Every Swing text component has an instance of Document associated with it. The Document contains both the content for its component as well as any style information for the rendering of the content. All content is stored in the Document's Element array. Style information is stored in each Element as an AttributeSet. We'll get into AttributeSets in the next article, when we discuss styled text components. "
Mainly concentrating on :
All content is stored in the Document's Element array. Style information is stored in each Element as an AttributeSet.
This would indicate that each time a new attribute is applied to something that it is stored as a separate String in an array, along with the attribute relating to it, would it ?
I've looked here:
http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/JTextPane.html#getParagraphAttributes()
And here :
http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/text/Document.html
But still cannot figure out a way to do this, I presume I must get at the Document 'array', and if I had this everything would be fine.
Should I run through every single charactor in the 'editable' JTextPane, check its attribute and add it my my own special made class?, and pass this class to 'non-editable / viewable-only' JTextPane ?
Any opinions would be very helpful.

I upgraded to Mountain from Snow and find that there is now a problem adding iphoto to the cloud. I have iphoto '08,version 7.1.5. Tried to follow one poster's advice and upgrade to 9.1 but I need 9.0 first and I can't find that. suggestions? thanks!

I upgraded to Mountain from Snow and find that there is now a problem adding iphoto to the cloud. I have iphoto '08,version 7.1.5. Tried to follow one poster's advice and upgrade to 9.1 but I need 9.0 first and I can't find that. suggestions? thanks!

You have to buy iPhoto from the Mac App Store.

Planning to upgrade from Hyperion v9.3.1 to Hyperion V11.1.2.1

HI,
I have doubt on upgrade part.
Planning to upgrade from Hyperion v9.3.1 to Hyperion V11.1.2.1
Below products are using in v9.3.1
1.     Essbase
2.     EIS
3.     Web Analyzer
4.     Excel Add-in
Below breakup for Hyperion objects
Total number of cubes – 10,
Total number of analyzer reports – 100
Total number of users – 50
     Can we upgrade all essbase cubes from v9 to v11?
     What consideration need to take while EIS upgrade?
     Can we upgrade all 100 reports?
     Can we upgrade all 55 users?
     Any other points need to look while doing upgrade?
welcome your feedback.
Regards
Praveen

Here is the document that will help you.
http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_11121.pdf
I would think the answer to all your question is "Yes" but that said, I am not very sure about Essbase.:)

Urgent: Different Hyperion Components configuration in one Shared Service

Hi,
Here is my requirement:
We are updating all our existing Version 6X. 7X applications to EPM Version 11. I want to configure all the applications installed in different servers to one shared service. All users belongs one Active directory only.
Plan is like this
Server1: Essbase component. I have nearly 5 application created in this server.
Server2: Again Essbase. Again 5 application is this server.
Server3: Hyperion Planning,
Server4: Hyperion Financial Reporting
Server5: Hyperion Workspace
So, all these different Essbase and planning applications are installed in differnet servers. Can I have 1 shared Service for all these applications. If yes, can anyone suggest the approach and the configuration details.
Appreciate your help in advance!!!
Thanks a lot... Regards, UB

UB,
You can configure all the Hyperion components on different servers to a single shared services server.
When configuring the components, you point to the shared services server you want to use. Select Connect to a previously configured Shared services
Hope this post gives you an insight.
let us know if you have any other queries on this.
If something is wrong with the content in my post, please clear it by posting. TIA.
- Sai
Edited by: Sai N on Jun 4, 2010 2:59 PM

Upgrade to Hyperion Enterprise 6.5.1.1.102 - Performance Issues

We are testing an upgrade to Hyperion Enterprise 6.5.1.1. We have applied the Update 2 patch which I believe officially takes the version to 6.5.1.1.102. In testing reports and consolidation between the new version and the old 6.4.1 version of Enterprise, we are seeing a delay in how long it take reports to generate and for Consolidation to complete. With reports, we see the delay specifically when running large reports that pull a lot of data.
Currently, our 6.4.1 Hyperion application is installed on a Win2003 server and our users access Hyperion via Citrix. The 6.5.1.1.102 version is installed on a Win2008 server and is being accessed through Citrix.
To isolate this issue, we loaded Hyperion locally on a server and the timed some reports. The 6.5 reports take just as long to run as on our current v6.4 platform. So, it appears there is a performance issue running 6.5 enterprise through Citrix. Has any one else experienced this type problem or have any suggestions. We have been referred to numerous performance tuning notes from Hyperion support but nothing seems help.
Thanks.

Hi,
I would suggest you to apply the latest patch 6.5.1.1.103, and I would strongly recommend you to upgrade to HFM.
Hyperion Enterprise and Hyperion Enterprise Reporting Statement of Direction (Doc ID 1396504.1)
Hope this helps,
Thank you,
Charles Babu J

Oracle10g to 11g Upgrade with Hyperion

Hi'
Our client is using EPM 11.1.1.3 with Oracle 10G as Database server.It has EPMA architecture.
As Oracle 10G support is getting stopped,they need to upgrade their database from 10 G to 11 G.
Can you please advice if there is any documentation or procedure we will need to follow for Hyperion Applications pertaining to this upgrade?
What will be the impact on Hyperion.
Thanks

Hi,
Could you please tell me, u want to update Oracle 10g to 11g? (which u have used for hyperion configuration)
U want to upgrade Hyperion version also or u want upgrade only database for the same Hyperion version?
first check the support matrix of particular version is supports to that database or not.
Then take back up of everything, reconfigure the EPM Products again.(must take backup of every thing)
Follow the John suggested document "How To Change Shared Services Database Repository in EPM 11 [ID 976279.1]"
Cheers,
mady
please mark the replies as helpful or correct
Edited by: mady on Jun 3, 2013 7:19 PM

Advice on upgrading ASA 5510 from version 8.4(4)1

Hello all,
Due to an issue we need to upgrade our ASA. Cisco Support team recommended upgrading to version 8.4.7, but, as we'll upgrade, we'd like to upgrade to version 9.
We still use Cisco VPN Client for Remote Access VPNs so I'd like your advice on which version to install on ASA.
Would you recommend version 9.0.3? 9.1.X?
Thanks in advance,
Igor

We have a pretty huge ASA and ASASM complex, and we are just about finished upgrading from an assortment of 8.4.x, 8.5.x, and 8.6.x installs to 9.1.3 on everything. There is one gotcha on some systems in that there is a file system change or some sort of bug that is fixed in 8.4.5 I think. So you _may_ have to first upgrade to a newer version (8.4.7 would work) before going to 9.1.3.
Our Cisco team has recommended going to version 9.x, and this is supported by recent tickets I've had on our stuff still running on 8.x, as the TAC engineer often says we need to upgrade to version 9.
Four our setup, we had some fatal bugs in 8.4.6 and 8.4.7 that kept us running 8.4.5 for a very long time on some equipment.
Anyway, I would recommend going to 9.1.3, which is one removed from the recently recleased 9.1.4. Our AnyConnect VPN complex has been on 9.1.3 for a few months now with no issues. Be sure to read the release notes thoroughly as 9.x changes some command contexts, new features, etc.
Graham

Advice on upgrading to SSD for Mac Pro (optimized for AfterEffects & Photoshop)

Hello,
I'm an animator (I use AfterEffects CS5, but will be upgrading to CC soon) and I'm going to start work on a new AE project in a few months for an animated film that will be very demanding (lots of different shots -- meaning multiple projects, all of which will also incorporate large HD stock footage elements as well as multiple layers of art created in Photoshop).
So I'm looking to upgrade my current desktop Mac Pro (a 2010 2x2.66GHz 6-Core Intel Xeon) with SSD drives (and possibly a new graphics card) in order to speed up my system and optimize it for both AfterEffects and Photoshop. (In the past I've created projects using external 7200 RPM hard drives connected via eSATA). I've also decided, for now, not to purchase the new Mac Pro, but rather try and make a smaller investment to speed up my current system.
I'd love any advice that pro users would have that have made similiar upgrades, both in terms of the best equipment (SSD drives and graphics card) and the best way to set up AfterEffects/Photoshop projects using these SSDs.
For example:
1. Should I be purchasing 1 or 2 SSDs, and how should I be using these drives to optimize my system for AfterEffects and Photoshop?
2. Should I install my operating system (I'm on OS 10.8.5 but plan to upgrade to Mavericks when I upgrade to CC) on one separate SSD, and then install my Adobe applications on a 2nd SSD, or can I put both the operating system and applications on a single SSD? And should I be saving my projects on a SSD (if so, which one, if I'm supposed to purchase 2?
3. Should I assign a 2nd SSD as a scratch disk for AfterEffects or Photoshop?
4. I plan on using my current external hard drives (a 12 TB RAID array connected via eSATA) to store the footage and Photoshop elements being used in my AE projects (these files will be multiple GBs, and I can't afford to purchase SSD drives to hold these elements on) and also to store the renders from AfterEffects (which will also be very large files). Is this OK, or will this slow me down and negate whatever speed I've gained from moving to SSDs?
5. In researching how to switch over to SSD, I've considered purchasing 1 or 2 SSD drives. The one I'm currently looking at is called the Murcury Accelsior_E2, a PCI Express SSD sold via OWC. It comes in a few different sizes (120 GBs, 240 GBs, 480 GBs, 960 GBs). Just wondering if this is a good purchase -- the reviews seem to be very positive:
http://eshop.macsales.com/item/OWC/SSDPHWE2R960/
6. I'm also considering upgrading my current graphics card (ATI Radeon HD 5870) to the NVIDIA Quatro 4000 or NVIDIA Quatro 5000, but I'm wondering how much of a speed boost this would give me.
Here's an overview of my current system:
Computer: 2010 Mac Pro with 2x 2.66 GHz 6-Core Intel Xeon
Memory: 64 GB DDR3 ECC
Graphics Card: ATI Radeon HD 5870
Hard Drives (Internal): 2x 2TB Hitachi HD
Hard Drives (External): 12TB OWC Mercury Elite Pro RAID drive array (connected via eSATA)
Apologies in advance for the long message, but I've always recieved great advice from these message boards and I'd appreciate any help!
Thanks,
Dan

Thanks so much for jumping back into the discussion, The hatter! I had some earlier questions from before that I was hoping you could answer:
Currently I own a 12 TB OWC Mercury Elite Pro RAID drive array (connected via eSATA) which I use to save projects, project files, and renders. So (unless I am mistaken) you're recommending that I continue to use this RAID array to save projects, project files, and renders.
(I was looking into purchasing a Mercury Accelsior_E2 for my SSD via PCI -- it has eSATA, so I can continue to connect my RAID array)
Then I would use my new SSD via SATA II for my system, apps, and OS (minus home folder media files, data, documents) and my SSD via PCI for scratch disks for Photoshop/AfterEffects.
Currently I have 2 x 2 TB internal hard drives, which have all my OS + home folder media files.
Can I get more details in terms of the step-by-step instructions when it's time to install/clone? Here's how it looks to me (apologies if I have this out-of-order, and feel free to correct me if I've missed a step or have it wrong -- thank you in advance!):
1. Purchase SSDs (via PCI and internal SATA II) and install them inside my Mac Pro.
(Is there any formatting I need to do at this point to the SSDs once they are all plugged in...?)
2. Install TRIM Enabler
(Once it's installed, what do I do with TRIM Enabler? Is it an app that runs 24/7 in the background, or is it an app that I need to launch on a regular basis and perform commands on the SSDs...? Very confused on what TRIM Enabler does.)
3. Use CCC to clone system from old internal hard drive to new internal SSD drive. When using CCC, deselect media folders in home account before cloning (so I am NOT cloning media folders from old hard drive to new SSD drive).
(What specific media folders should I be deselecting? I'd like to keep my music, movies, iPhoto/Lightroom files, and email archive where they are now -- on the 2 x 2TB internal drives that shipped with my Mac Pro. Is there a link that provides more info on this process? Never used CCC before but I assume it's not too hard to use...?)
4. CCC clones system gets 'cloned' (minus the media folders) to the SSD that is installed via SATA II in empty internal drive bay inside Mac Pro.
5. Repair the SSD with DU after cloning and before using and booting from SSD.
(What is DU? How does it work? Not familiar with DU...?)
6. Reboot computer from system running on SSD.
7. Open Photoshop/AfterEffects (now running from SSD) and assign new scratch disk (the SSDs on PCIe SSD controller).
8. After 100% sure that system + apps that have been cloned is working via SSD, delete ONLY system and apps from old hard drive (but do not delete media files).
(Now that my system is on a separate SSD drive, when I do things like purchase new music from iTunes, will it get downloaded to the old location (my old hard drive with all my media)? In other words, are there steps I have to perform in order to relink my media folders now that they're on a separate drive?
Thanks,
Dan

Need advice on upgrading OS and iPhoto with multiple altered libraries.

I am going to upgrade from Tiger to Snow Leopard (Bundle Pack) and from iPhoto 6 to iPhoto 8. My wife and I have separate accounts on our MacBook Pro and I have combined our iPhoto Libraries onto an external hard drive using iPhoto Library Manager. Afterwards, I opened the Mac HD icon on my desktop, opened the pictures folder, went through the iPhoto Library folder, and opened the Originals folder. I deleted my photos through here which kept the thumbnail data (when I open iPhoto, I can see all of my photos, I just can't enlarge them beyond a certain size or I get a grayed out image with an exclamation point). I have since done the same for some of my wife's photos to free up space. This has been sort of useful to know what photos we have while not eating up the hard drive.
How do I install iLife '09 with a clean iPhoto Library? I do not care about seeing thumbnails anymore. However, is it possible to keep the thumbnails on my wife's account? When I open the iPhoto Library on the external HD, will it automatically convert it to the updated version?
An Apple Tech once told me that altering the iPhoto database like I did can corrupt it and they have since removed that ability in the latest version of iPhoto. I know I screwed it up and am unsure about the best approach once I do upgrade. Any advice is much appreciated.

bustercharlie wrote:
I am going to upgrade from Tiger to Snow Leopard (Bundle Pack) and from iPhoto 6 to iPhoto 8. My wife and I have separate accounts on our MacBook Pro and I have combined our iPhoto Libraries onto an external hard drive using iPhoto Library Manager. Afterwards, I opened the Mac HD icon on my desktop, opened the pictures folder, went through the iPhoto Library folder, and opened the Originals folder. I deleted my photos through here which kept the thumbnail data (when I open iPhoto, I can see all of my photos, I just can't enlarge them beyond a certain size or I get a grayed out image with an exclamation point). I have since done the same for some of my wife's photos to free up space. This has been sort of useful to know what photos we have while not eating up the hard drive.
How do I install iLife '09 with a clean iPhoto Library? I do not care about seeing thumbnails anymore. However, is it possible to keep the thumbnails on my wife's account? When I open the iPhoto Library on the external HD, will it automatically convert it to the updated version?
Installing iPhoto '09 will work smoothly and seamlessly for operating libraries - I have no idea how it will react to the ones your have corrupted but suspect that it will upgrade them so they will operate in the same crippled way they do now
To have a fresh library you depress the option key and launch iPhoto and use new library option
An Apple Tech once told me that altering the iPhoto database like I did can corrupt it
that is correct as you see when you try to enlarge a photo in the libraries you have modified
and they have since removed that ability in the latest version of iPhoto.
not removed but made more difficult so it is less like to happen by mistake - you can still do it in a number of ways but it is not a good idea
I know I screwed it up and am unsure about the best approach once I do upgrade. Any advice is much appreciated.
My advice is to use standard operating procedure - backup everything up and do your upgrades (I would do the OS and wait a few days and then do iPhoto myself) - the good library will be updated and work as before - the corrupted libraries may or may not upgrade but i would guess they will and work as before too
LN

Advice on upgrade, settings, merging catalog

Do I need to start all over in setting up LR4 from LR3. It's been so long since I set everything up in LR3...I don't remember how I did it all! (Preferences, metadata, etc) Is there a way to bring all of that over in the upgrade process? (The box is still sitting on the shelf.)
I now have LR3 catalog, LR4 catalog from the beta. How do I, at least, get the LR4-beta catalog into the new lr4? I also don't want to clutter up my computer with 3 versions of LR. Will LR4-beta disappear after 31 March? What happens if I don't get the LR4 (actual) going by then? (I'm leaving the country for 2 weeks in a couple of days and won't be home until the 30th.)
Many questions. Haven't upgraded before....
Thanks!

There should not be an issue with upgrading in place - you have already given me my caveat. <grin>
You will need to upgrade integration components for every VM after upgrading Hyper-V. New ICs come with each release of the OS. Should not need to upgrade the VM's OSes other than that.
PowerShell. Can be used to change all VMs to not autostart and then change it back to autostart after everything is updated and you are happy. Can also be used to shutdown all the VMs instead of manually clicking on each one. I would definitely
make the change to not autostart - you are going to have more than one reboot in there, because you are also going to be applying patches. Don't want all those VMs yo-yo-ing
If you are using System Center to manage/monitor any 2012 R2 servers (after upgrade), you will need to upgrade to SC 2012 R2 because 2012 SP1 does not work with Windows Server 2012 R2.
. : | : . : | : . tim

Need advice about upgrades

I just bought my daughter a mbp for graduation. It is a mid 2012 15.4", 4GB, 500 GB HHD i7 2.3 GHz. She is going to use it for college and she is starting a side gig doing photograpy for extra money while in college. After I bought it I was doing some reading on here and read that a lot of you using photoshop prefer 16 GB. I read somewhere that the 4 GB can only be upgraded to 8 GB but I also read that the mbp supports 16 GB so I think I could do that 3rd party later anyway. I am wondering if you guys think it is worth the extra $255 to exchange this one now for the 8GB with the 256 GB SSD. Any advice from your experience would be greatly appreciated as I am giving it to her tonight for graduation.

mid 2012 15.4", 4GB, 500 GB HHD i7 2.3 GHz.
The MBP you purchased for your daughter is an excellent computer. May I suggest getting the additional RAM from OWC or Crucial. A 16GB kit is currently $125 and you can upgrade it yourself. I'd keep the 500GB hard drive (not get an SSD) and instead invest in an external drive for backup and extra storage. (BTW, did you get AppleCare with this MBP. If not, I'd certainly recommend it.)
Exchanging your MBP for another model with a 256GB SSD? Well ... imho it's not a good idea. It's more money for less capability (even if the SSD is modestly faster than a hard drive, it's half the capacity of the 500GB hard drive). If your daughter makes good use of the MBP, and even more if she really gets into digital photography, a 256GB SSD is not going to be nearly enough storage (for the system, applications and data combined) and you will be looking at getting an external hard drive anyway.
For comparison purposes, I have a late 2009 MBP with 8GB RAM, 750GB hard drive and it runs Adobe CS6 Design Suite (Photoshop, Indesign, Illustrator & Acrobat), Aperture and Final Cut perfectly - plenty of speed and performance. Your 2012 MBP with 16GB will be even better for these apps.

Advice on upgrading

Hello all-
So, I've gotten a bit tired of all of the capture problems related to new versions of Quicktime, etc. (I'm still on FCP 4.5). I'm now prepared to upgrade in the hopes that it will eliminate these headaches.
My question is - what do I "need" to upgrade in order to run free of these issues of 4.5 playing nice with new versions of QT? In other words, can I upgrade to most current version of FCP and NOT upgrade my OS? (I'm on 10.4.11 and not sure if I must upgrade to Leopard to avoid other issues)?
Any advice is appreciated?
If my most foolproof way to get things operating consistently is to upgrade FCP and also upgrade the OS, I'm happy to do that as well.
Thanks-
Dave

Yes, FCP 6.0.2 runs on OS 10.4.11...in fact, that is the only version of TIGER it works on. But I have that on my laptop and my G5 and I run FCP 6.0.2.
Shane

Can anyone give me advice in upgrading my Safari?

I am currently running Safari 1.2 on Mac OS X 10.3.9 - it keeps crashing when I navigate away from the apple site and I am keen to upgrade.
I tried using the normal software update with no result.
I tried downloading Safari 1.3.1 (which is supposed to be compatible with 10.3.9 - correct me if I'm wrong) but when it comes to choosing a volume to install the package on, the error message : 'You cannot install this software on this volume. This system cannot use this software'.
So I am stuck running a version of Safari that crashes most times I navigate away from the apple page and can not run things like BBC iPlayer or youtube.
Any help/advice would be much appreciated!

Safari 1.3.1 is downloadable fro here:
http://support.apple.com/downloads/#safari%201.3.1
The 1.3.2 update from here:
http://support.apple.com/kb/DL403
can not run things like BBC iPlayer or youtube.
You still won't be able to. Your OS, Safari and Flash versions are seriously out of date.

Have old Power Mac G4, need advice on upgrading the operating system

Hello. Glad I found this forum. Wish it was prominently advertized on the Apple home page. Anyway, I have an old Power Mac G4 running OS X 10.0.4. Well, actually, I've always run it in OS 9.2. In fact recently I started playing with it again and switched it to OS X 10.0.4 and it seems to be unstable. The display dissappears after a while running. The machine is not off, just no display. Hitting the smaller reboot button brings it back up, only to have it repeat the failure. But that's not really my question. I want to use this machine as a Skype phone and for iMovie in OS 9.2. Skype is only available for OS X 10.3.9 and later OS's. So, if it's not a major hassle and expense, I want to upgrade to OS X 10.3.9 or later. That's where I need some advice. Having never attempted such a project, I'd like as much feedback as I can get about what to expect going in. Here are some questions:
1. Will I still be able to run OS 9.2 (either concurrently or by switching the startup disk when needed) if I upgrade to OS X 10.3.9 or later?
2. Will this instability with OS X 10.0.4 dissappear if I uprgade?
3. Where can I find the appropriate upgrade software?
4. Can I jump from OS X 10.0.4 to a version as late as OS X 10.3.9 without any intermediate steps, and without creating all kinds of little inconsistencies that I will have to chase down to make it work right in day to day use.
If I get answers to all that, I'll be blown away by the spirit of helpfulness on this forum! But anything you can offer will be greatly appreciated. I don't really want to do anything fancy with the machine, just Skype, hopefully iMovie and maybe stream some TV programs if all goes well. Thanks for reading through all this and for anything you can offer.
Power Mac G4
Hard drive: 38.34 GB
Built-in Memory: 384 MB
OS 9.2 & OS X 10.0.4

appleysmappley:
Cornelius, clearly you know your Macs!
Thank you. I have great mentors, one of whom is Kappy.
My next question about OS 9 is, if I have to wipe the hard drive, will the Panther retail box I buy include OS 9 or will I need to somehow add it from the original software pack I have after installing Panther?
You have options.
1. You can choose to install Panther using the Archive and Install option, which will leave OS 9 untouched. However, since you currently have OS X 10.0.4 on your drive, I think a complete reformat, erase and reinstall is advisable.
2. You can copy your OS 9 Systems Folder, OS 9 Applications Folder and any data you have have to a USB jump drive, or CD or an external Hard Disk Drive and restore it after Panther or Tiger is installed.
3. You can install OS 9 from scratch. We will give you step by step directions for doing it.
I'm assuming I can't use the disks that came with my laptop to updgrade my Power Mac G4, right?
It may or may not work. However, the Apple Software License Agreement stipulates that unless you have a multiple user license, the OS can only be installed on one computer at a time.
I'm concerned about OS 9 is because I want to be able to run the OS 9 iMovie that I have on the Power Mac G4 now.
If you reinstall OS 9, that should be included. OS X also has iMovie, although I am not sure if it is included in the Retail Version. You can also purchase iLife which will include iMovie and other apps.
What are the potential pitfalls of buying a copy on eBay? What do I need to know to "know what I'm looking for"? What questions should I ask?
The pitfalls are many. There is fraud on eBay (elsewhere, too, I guess), so you want to be sure you get a reputable seller. You want to be sure that you are getting the Full Retail Version, not computer specific gray disks or upgrade installers. You should ask the seller, in addition, whether you can return the merchandise for a refund if it does not work on your computer. Most reputable sellers want to satisfy their buyers and their business depends on their reputation.
Kappy said I would need more RAM (I have 384 MB). Where would you recommend buying that?
Your computer will support a total of 1.5 GB of PC-133 3.3v, unbuffered, 8-byte, non-parity 168-pin SDRAM in 3 slots. You currently have a 128 MB and 256 MB modules in two slots. You can remove one or both and add two or three 512 MB modules. Check out the list of vendors and prices at ramseeker
Good luck.
cornelius

Advice on upgradation of Hyperion components

Similar Messages

Maybe you are looking for