Advice on upgrade from Ecc 6.0 (No enhancement pack) to EHP 7

Dear Friends
Our customer is thinking about upgrading  from  ECC 6.0 (No enhancement)  to EhP 7. Can anybody tell me what are major efforts, steps and approx. time and precautions to consider in this case.
thanks a lot in advance
Victor

Hi,
SAP Library for SAP ERP on the SAP Help Portal at http://help.sap.com/erp. Choose a
release and then choose Application Help. In SAP Library, choose Business Functions (SAP
enhancement package 7 for SAP ERP 6.0) -> Business Functions in SAP ERP -> Enterprise
Business Functions -> Accounting -> Financial Supply Chain Management -> SAP Treasury
and Risk Management.
Hope this helps.
Regards,
Jyoti

Similar Messages

  • Best Practice in Upgrade from ECC 5.0 to ECC 6.0

    Dear All,
    Can someone help in looking for Best practice in Upgrade from ECC 5.0 To ECC 6.0 Project from Functional FI and CO Side.
    Thanks

    Moved to a different forum.

  • Upgrade from ECC 5.0 to ECC 6.0

    Hello All,
    I am preparing a pre-upgrade assessment for upgrade from ECC 5.0(SCP) to ECC 6.0.. I am suggesting the strategy Combined Upgrade and Unicode Conversion.
    I need a template on how to prepare the pre-upgrade assessment for this upgrade..The template should also contain Impact analysis on the other application like BI 7.0, EP 7.0 and CRM 5.0..
    How do I find out the Impact analysis on the other systems.Please do provide your suggestions on this.
    Thank You,
    Regards
    Thilip Kumar

    Hi Sharad,
    Thanks for your reply..Even I could not find any other added advantage that CUUC startegy can provide for systems with SCP..
    @All- Sorry to ask too many questions in one thread.
    One more question- What is the impact of ECC 6.0 upgrade on
    1) Solution Manager 4.0
    2) BI 7.0
    3) EP 7.0
    4) CRM 4.0
    Any document in SMP which talks about the impact on SAP landscape?I could not find a tailor made documentabout Impact Analysis of ECC 6.0.
    Regards
    Thilip Kumar

  • Upgrade from ECC 6.0 with no EHP to EHP 7

    Hello,
    We are planning an ERP upgrade from ECC 6.0, which has no enhancement package, to EHP 7.
    Can this upgrade be done :
    1. Directly to EHP7
    OR
    2. Do we need to first upgrade to a lower EHP, for example - to EHP 5 or 6 first, and then to EHP 7?
    Thanks and Regards,
    Reena

    Hi Reena
    Yes, you can upgrade the system to ECC 6 EHP 6 or 7,
    before that is any other SAP system are connected to ECC6 ?
    If it is yes, Kindly refer the SAP Note, & you require to check those SAP version are supported to ECC 6 EHP 7 ?
    1388258 - Version Interoperability within the SAP Business Suite
    BR
    SS

  • Upgrade from ECC 6.0 to NW 7.10

    Hi,
    I'm trying to plan ahead for our upcoming hardware replacement (3 yr lease). We are also planning for an ECC 6.0 upgrade from 4.7 Enterprise (unicode). I know that the power 6 chip has a built in decimal floating point processing which I believe will be useable with Netweaver 7.10.
    Is the upgrade from ECC 6.0(a NW7.00 product?) to NW 7.10 a full upgrade or is it more like a big hot pack? 
    The reason I'm interested is that I would like to think I could take advantage of the Decimal Floating point processor sooner than later. The other part of the equation is that we have a BI based on NW 7.00 now.
    If I can avoid purchasing another i5OS and paying for a processor activation because there is now a math feature built into the processor , I'm all for it. I would like to start planning now if the upgrade to 7.10  isn't going  to be too painful.

    Hi Craig,
    From what I heard, there would not be another major ECC release in the near future. New functions have been and will be released in "Enhancement packages" - hopefully it is not another new term to you...
    NetWeaver 7.1 has been released (Q3 2007? not Q3 2008 for sure). BI folks might know whether there will be a release 7.1 or not.
    Best regards,
    Victor

  • Upgrade from ECC 5.00 to ECC 6.00

    We are planning upgradation from ECC 5.00 to ECC 6.00. What will be the role of FICO consultant in detail.

    check the customization setting after upgrade
    run a Unit Test and Integration Test.
    run the Report developed

  • Right SAPup version for upgrade from ECC 5.0 to ECC 6.0

    Dear Expert!
    I am upgrading from ECC 5.0 to ECC 6.0 , but i have a erro, with SAPup tool, I don't know to select right SAPup version, please show me about that, thank you very much!
    Tru Hang

    Hi,
    As anil you have to download the Upgrade guide, therer you could see the clear information -about SAPup.
    they have mentioned the issues with SAPup and they have asked us to use new SAPup version due to the issues of Old SAPup version.
    have a look at the below notes
    821032  Corrections for SAPup release 7.00
    1056649  Corrections for SAPup release 7.10
    48184  Upgrade: Stopping a running R3up or SAPup
    1070771  Do not use SAPup version 7.00/2, build 24.094 !
    You can see lots of threads in SDN lot of threads talks about SAPup issues.
    -Srini

  • Does for upgrade from ecc 5.0 to ecc 6.0 we have to pay money  for that

    Hi All
         Does for upgrade from ecc 5.0 to ecc 6.0 we have to pay money to SAP for that.

    hi,
    asking or teling ?
    I think you need not as long as you are with official support . However please contact sap official support in you region

  • Increased number of journal receivers after upgrade from ECC 5.0 to 6.0

    After are upgrade from ECC 5.0 to ECC 6.0 on an iSeries machine we have noticed an increase in the number journal receivers being created by SAP approximately twice as many that were being created on are 5.0 system. I've checked all the attributes for the journal receivers and they were set the same on both versions. This hasn't caused use any issues but just wondering if anyone else has experienced this or knows the cause of this. Thanks, Jason Duncan

    After are upgrade from ECC 5.0 to ECC 6.0 on an iSeries machine we have noticed an increase in the number journal receivers being created by SAP approximately twice as many that were being created on are 5.0 system. I've checked all the attributes for the journal receivers and they were set the same on both versions. This hasn't caused use any issues but just wondering if anyone else has experienced this or knows the cause of this. Thanks, Jason Duncan

  • SAP Upgrade from ECC 5.0 to ECC 6

    Hello All,
    We are planning for an upgrade from ECC 5 to ECC 6. As some obsolete statements like "Use of header line" is no more supported in ECC 6, do we need to manually change in all custom programs and FMs? Or is there available a tool to do so? or will SAP as part of the upgrade do the necessary. Because this is a huge effort
    Thanks in advance for your response
    Anirban

    Hi,
    It has to be manually done for each and every program.
    Probably your company can check if there are any third party vendor tools that does the conversion, but anyways someone has to manually check the programs and test all of them.
    Regards,
    Subramanian

  • US Payroll upgrading from Ecc 5.0 to Ecc 6.o

    Hi Experts
    My client want to upgrade from Ecc 5.0 to Ecc 6.0 for all modules including US payroll.
    please advise me what are the tables in i need to take care? means i need to have copy for double check?
    Is any tables which was there in Ecc 5.0 and not available in Ecc 6.0?
    I know that we need to have the backup of table T512w and T5uj tables, Apart from these table what other tables i need to check and have backup for double check?
    Thanks in advance
    Regards

    Use following...Good luck...
    Tables:
    T52D2     This table is used to store processing class values
    T512W     In this table, we want to check if someone made changes to the wage types in the SAP name range. We will therefore compare the wage types (only for country code = 10) in the SAP name range (/, M, B*) between two systems.
    T512T     In this table, we want to check if someone made changes to the wage types in the SAP name range. We will therefore compare the wage types (only for country code = 10) in the SAP name range (/, M, B*) between  two systems
    T77S0     For table T77S0, we want to compare the switches that were changed in the SAP name range between  two systems.
    T511K/P     For these tables, we want to check which constants in the SAP name range were changed that may be reset back to standard.
    T591A     For table T591A, we want to check which time constraints and subtypes have been changed, created and deleted
    T52EL/Z     For these tables we want to check if any posting attributes of wage types in the SAP name range have been altered.
    T556U     This table has a delivery class of E which means that SAP and the customer shares this table but with separate name ranges.
    T52D7     This table has a delivery class of E which means that SAP and the customer shares this table but with separate name ranges. Customers are supposed to use name range /9** and 1*** - 9***. This table is used to group wage types.
    T54C3     This table has a delivery class of E which means that SAP and the customer shares this table but with separate name ranges. Customers are supposed to use name range /9** and 1*** - 9***. This table is used cumulate wage types.
    T52OCR     This table is used to store off-cycle reasons.
    Tax Reporter tables     Verify the tax reporter configuration tables to make sure that the standard entries were not changed and overwritten.
    Programs:
    RPUMKG00     Re-generate all features
    RPUBTCU0     Validate BSI connectivity for tax calculation
    RHTTCP77     Table configuration needed for process models
    RHSOBJCH     Table configuration needed for process models
    RPUCT700     Generate all payroll functions and operations
    Arti

  • Impacts on MRS and MAM during upgradation from ECC 5.0 to 6.0

    Hi Gurus,
    I would like to know the impacts on MRS and MAM during the upgradation from ECC 5.0 to 6.0. The version of MRS we are using is MRSS 500, and the version of MAM is 3.0. please let me know your valuable comments.
    Thanks in advance.
    Regards
    Satish

    HELLO,
    Search the form you will get few links.
    Also many companies have gone technical upgradation , but not functional upgradation.
    Thanks
    RK

  • Need help on ESS/MSS BP's impact due to Upgrade from ECC 5 to ECC 6 EHP5

    Hi,
    We are upgrading from ECC 5.0 to ECC 6.0 EHP5 and EP 6.0 SP23 to EP 7.0 EHP2 {7.02}.
    Right now the ESS/MSS BP's used in the Existing system (ECC 5.0 and EP 6.0) are given below.
    sap.com  BP_ERP4ESS 60.2 SP0 (1000.60.2.0.0.20050419020715)
    sap.com  BP_ERP4MSS 60.1 SP1 (1000.60.1.1.0.20080618080447)
    i.e.
    sap.com SAP_ESS  100 SP16 (1000.100.0.16.0.20090316001300)  
    sap.com SAP_MSS 100 SP20 (1000.100.0.20.0.20081013052238) 
    sap.com SAPPCUI_GP 100 SP20 (1000.100.0.20.0.20081013052239)
    We want to run the same BP's in the New environment (ECC 6.0 EHP5 and EP 7.0 EHP2 {7.02}).
    If anyone has idea on this, Please let me know is it possible or any modifications to be done ?
    Please send me some documentation to get clear idea.
    Thanks & Regards,
    Ashok M.
    Edited by: Ashok Kumar Munugoti on Oct 20, 2011 8:22 AM

    Well i would recommend to use lates BP cause lot has changed from ECC 500 to ECC 600
    and they wont be supported and you ll definately get support mismatch here
    read here for compatibilty issues
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES

  • Upgrading from ECC 6.0 Sp11 to SP15

    Hi,
         We plan to Upgrade from ECC 6.0 Sp11 to SP15.
    I like to find the documents for SP 15 to estimate the effort required for upgrading.
    It would be great if some one provide me the info where to get this.
    Thanks
    Senthil

    Hi
    Support Packages:-
    SAP delivers various types of program corrections with Support Packages as part of the software maintenance. Support Packages automatically correct a whole range of errors by downloading corrections into the SAP System. Two categories of Support Packages are available: ABAP Support Packages and Java Support Packages.
    Enhancement package:
    New functionality will be added to your existing sofware components
    Please go thorugh link http://service.sap.com/erp-ehp for more information
    Regards
    Uday

  • Special Characters in Packed Field After Upgradation from ECC 5 to ECC 6

    Hi All,
    After Upgraded from ECC 5 to ECC 6, we are getting error as 'Packed field contains incorrect BCD format'.
    I found the error in below code..
    CALL METHOD cl_abap_container_utilities=>read_container_c
          EXPORTING
            im_container           = j_2iextrct-extrctdata
          IMPORTING
            ex_value               = i_rg23part2-i_part2_typ
          EXCEPTIONS
            illegal_parameter_type = 1
            OTHERS                 = 2.
    i_rg23part2-i_part2_typ-EXAED = 0.<0
    i_rg23part2-i_part2_typ-CESS   = 0.<0
    for some packed fields special characters are appearing, which leads to a short dump.
    Any Suggestions.....
    Thanks,
    Satish Reddy.
    Edited by: Sathish Reddy on Jun 25, 2010 4:49 PM
    Edited by: Sathish Reddy on Jun 26, 2010 11:01 AM
    Edited by: Sathish Reddy on Jun 29, 2010 12:58 PM
    Edited by: Sathish Reddy on Jun 30, 2010 11:51 AM

    HELLO,
    Search the form you will get few links.
    Also many companies have gone technical upgradation , but not functional upgradation.
    Thanks
    RK

Maybe you are looking for