Advice on using Pen tool to create shine effect?

I'm very new to the pen tool. I want to draw a shape at the top of my rectangle and lower the opacity of it to make it appear similar to a top lit shine like something that Apple uses.
I place my first anchor point in the upper left corner, move the pen to the center of the rectangle (based on what the smart guides tell me) and drag the handle to the right, I then plot the anchor point in the upper right hand corner and it finishes the other side, Lastly, I close the path by clicking back on the first anchor point.
1.) is this the correct way to use the Pen tool?
2.) can anyone suggest anything else I might do make this effect look better?
Thanks in advance!

In the tarnsparency Panel there are the blending modes which work on individual object groups or layers
and you can also give each object transparency as well.
You mightwant to create a highlight or some kind of reflection.
I am sure you can do better than I did I used an Effext>Styklize>Feaher to soften theedges of the highlights though often highlisht are no soft.

Similar Messages

Using Pen tool to create mask _ How do you get the points to stop connecting together?

I've masked the sky over the roof of a home. Started on the left side of the photo and moved over the house detailing it to the right side of the photo. When I try to create the mask by clicking Command /enter the points on the left and right side of the image connect which makes it impossible for the mask in the sky to work.

Hi John,
Thanks. I figured it out so there’s no need.
Aloha,
Rick Doyle
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
[If you are posting using email, please turn your 'sig file' function OFF for posting]

How to add a 'stoke path' using 'pen tool' on CS6 (mac)?

I'm a beginner at photoshop and I'm only 14 years old. I need to know this for my GCSE project.
I'm trying to create something similar to this:
Using pen tool and stroke path, but when i use the pen tool I'm not sure how to add the stroke path like that.
I've used CS4 previously at school and when you right clicked on the path it came up with this:
I haven't a clue how to get that up on CS6 (on mac) and when you right click it, it just seems to continue adding the path. Any help?

In addition to conroys advice here is a video tutorial that might help you as well:
enjoy,
janelle

Using pen tool, no fill no stroke but still colored line?

I have used the pen tool to draw shapes in Illustrator. Some shapes have normal paths and some are weird. The normal paths disappear when they aren't clicked on, the weird ones have a green stroke always. There is no fill and no stroke on so I am confused. Also when I click on the normal ones and then try to use the pen tool, it creates a normal path. When I click on the weird ones and use the pen tool, it copies it and makes a green line. If I put on a stroke, its like there's an inner stroke. Please help!!

You sure that the green ones aren't Guides. I believe the default color for Guides is green. What happens if you go to View>Guides>Clear Guides? Do the green paths disappear? Cmd(Ctrl)-5 is the KBSC for Make Guide. If you accidentally hit that with a path selected it will become a guide.

CLOSING A PATH MADE UP OF CURVES USING PEN TOOL AND STRAIGHT LINES USING LINE TOOL

Hi,
I have just started using Fireworks and am unable to close a
figure made up of curves using pen tool and line segments using pen
/ line tools. How do I plot points on any given shape and close it
so that i can colour the shape . Right now I am not able to give
colour to the shapes I have created.
Please help
Regards
Sanjish

SANJISH wrote:
> Hi,
> I have just started using Fireworks and am unable to
close a figure
> made up of curves using pen tool and line segments using
pen / line tools. How
> do I plot points on any given shape and close it so that
i can colour the shape
> . Right now I am not able to give colour to the shapes I
have created.
>
> Please help
>
> Regards
>
> Sanjish
>
A link to the file would be helpful.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
See my work on Flickr
http://www.flickr.com/photos/jim_babbage/

Fill after use pen tool

it is possible after using pen tool in path mode ifill the objetc i made with color ? I need the steps/ Thanks

Use the path selection tool to select the path. Then copy it: ctrl/cmd-C. Use the pen or shape tool to create a SHAPE layer. just make a small box or something to create the layer. Then press ctrl/cmd-V to paste your path into that shape layer. Select the small shape you made to create the layer and delete. it.

How to use pen tool in Adobe and Illustrator?

How to use pen tool in Adobe and Illustrator?

With the pen tool in Indesign, is there a way of making the points not join if you want to make a few single lines?

To sign the document using pen tool in acrobat

hi ,
        I have to draw in the pdf using pen tool in a particular textbox. what i want to do in when i click in the textbox
      it has to go to pdf comment in it, It has to select the Drawing markups and then select pen tool automatically.
         I want a path for it directly . so that a layman can directly click the textbox and pen tool should open . so that he can sign the document
      Thanks,
      sachin.

Actaully this code is printing a flower using ink tool. can to modify this
code so that instead of printing it should display inktool by using which i
draw my own sign or image etc.
var inch =72, x0 =2* inch, y0=4*inch;
var scaledInch=.5*inch;
var nNodes=60;
var theta=2*Math.PI/nNodes;
var points =new Array();
for(var i=0;i<=nNodes;i++)
     Theta =i*theta;
points[i]=[x0+2Math.cos(3Theta)Math.cos(Theta)scaledInch,
                    y0+2Math.cos(3Theta)Math.sin(Theta)scaledInch];
var annto= this.addAnnot(
thanks,
sachin

Image desappears when i use pen tool

When i use pen tool, and crop tool,the image dessapears, i don´t know why this is happening. Please help.

Windows 8? Well known Windows bug that hasn't been fixed yet.
Go update your video card driver from the GPU maker's website, or set the Photoshop GPU mode to Basic.

I have noticed while using pen tool that I have to wait before the small square appears.

I have noticed while using pen tool that I have to wait before the small square appears. Tenth of a second, but this is disturbing on a daily basis. Is there any solution?

It seems that in your version of InDesign, the image preview is grayed out while you are editing the picture frame with the pen tool. Not the case with my version of CS5 for macintosh.
But I think this is a bad way to work. If you want the path only to affect text wrap, then edit the text wrap path. This is more versatile than editing the frame because you can have text appear over part of the image visible below text. This of a bird in flight in a light sky. The text wrap can surround the bird so text can appear in the sky. Your method does not permit this.
If you are editing the frame’s path because you also want to crop the image, then you’d be better off doing that in Photoshop by adding either a clipping path in the Paths panel or a mask in the Layers panel. If it’s an Illustrator file then add a clipping mask.
I find InDesign’s pen tool and general path editing to be significantly inferior to Illustrator’s. If I need to have an editable path in InDesign that I would draw much more easily in Illustrator, then I do that and copy the path back. It comes in as a simple unassigned frame, which I can then convert to a picture frame or a text frame and copy/paste the contents into the new frame. That may suit you if the above suggestions are inappropriate.

Need help in using Pen Tool

Hi,
I am trying to draw a nice curvy BOW using the pen tool.
How can i draw a nice curvy stroke using pen tool with thickness control.
Can any one help me ?
steve

Steve,
I am trying to draw a nice curvy BOW using the pen tool.How can i draw a nice curvy stroke using pen tool with thickness control.
Can any one help me ?
You may draw the spine of the bow with the Pen Tool and apply a custom made Artbrush to it; the Artbrush should be a fill no stroke shape reflecting the relative thickness along the relative length (the thickness (height) of the brushed path will be the thickness of the brushed stroke at 1pt Stroke Weight, and the length of the shape is arbitrary, so it can be set to 8, 10, 100, or whatever, because the brush strtches to the length of the path).
And you may draw half the bow, reflect (Object>Transform>Reflect) and distribute (Align>Distribute), and join the halves.

Using the Pen tool to create a shape with equal sides?

I am new to working with the Pen tool and started drawing a rounded button (I know I can easily do this with the rounded rectangle, I'm just practicing to learn the Pen), I draw the top horizontal line and start the curve going down the right side. How do I now continue drawing the lower curve so that it matches the one I already drew and replicate this on the other side? Is there an easy way to do this? Is there also a way for me to just copy this path and reuse it somehow?
Thanks.

I think you'll find this tutorial useful.
http://is.gd/A90Q5t

Using pen tool

when drawing a custom shape with the pen tool, let's say i am trying to draw the top-half of a circle (except the top-half line is flat). i get as far as the bottom right corner, and then when i try to line up the upper-right corner with the upper-left corner by eye, i create the rounded side, but then when i go to connect to the upper-left corner, it is not directly across so it curves it. do i need to use guides, or what is the best way to ensure that i am directly across from a point?

For the black lines, I'd draw simple rectangles or lines with varied strokes, then make a copy of the yellow oval (the bee's lower body), place it above those vectors, and apply it as a mask (using Modify > Mask > Group As Mask). This would make it easier to create the rounded edges and match them to the existing shape.
But that's unrelated to your original question. My general advice is, if a tutorial leaves you with too many questions, move on to another one that's more educational.
(Incidentally, instead of masking, you might use one of the Combine Paths commands to create similar visual results—using the oval shape as a cookie-cutter for the black lines.)

Photoshop CS3, using pen tool to make selection or path without any color

OK, here is my problem. I'm using CS3 photoshop right now. Last time I was using it regularly was in 2001, so it was version 5 or 6. At that time you could use the pen tool to make a selection or a path without ANY color. I'm trying to cut out something that needs precision (therefore the pen tool) but I need to be able to see what I'm doing. Therefore, would prefer no color option. This used to be easy, with paths, it was the default.
Can't figure it out now, HELP is no help. And, the User Guide is no longer available on Adobe.com. Looked for the one for the CS4 suite, not much much luck there either. I can call them tomorrow about that. *Right now, all I'm trying to do is put together a little pasted together thing for my niece. Two stuffed animals with antlers and santa hats on a Xmas background. Everything is done but cutting out around the stuffed animals. They need their little tufts of stuffing, so I need a tool that can create a smooth path without blocking what I'm doing with color.* Any help will me appreciated. I've tried for days to figure this out on my own, since last time I posted, I figured it out before someone responded. And, the response was quick, so I didn't want to waste anyone's time.
The pdf user guide for this is unavailable, I just ordered a book to help me with the stuff I can't figure out by myself. Thanks for everyone's quick help. –Suze

{quote:title=Suze159 wrote:}
I'm trying to cut out something that needs precision (therefore the pen tool) but I need to be able to see what I'm doing. *Right now, all I'm trying to do is put together a little pasted together thing for my niece. Two stuffed animals with antlers and santa hats on a Xmas background. Everything is done but cutting out around the stuffed animals. They need their little tufts of stuffing, so I need a tool that can create a smooth path without blocking what I'm doing with color.*{quote}
Suze,
I too use CS3 and I may be confused about your post. If so, I apologize for wasting any reader's time.
When I need a precision tool for rotoscoping a subject, I usually choose the Polygonal Lasso tool. Of all the Lasso tools, using the polygonal is the most labor intensive, but gives you the highest degree of control. With a little practice you can get quite good at it. If necessary, blow up the image to help you see what you are doing.
-- Duplicate the background layer
-- Rotoscope the subject
-- Click Refine Edge and adjust Radius, Contrast, Contract/Expand, Smooth and Feather to taste
-- Choose New>Layer via Copy or Cut
-- Hide background layer(s) and Save As or Move this layer onto your original graphic.
There may be other ways of doing it but this is what works for me. I hope that helps.
Eddie

Using pen tool to draw a particular shape...

Hi all,
I'm pretty new to Illustrator and just wanted some advice.
I'm using the pen tool to try and draw a specific shape () but finding it hard trying to 'smooth' out the points where I connect my lines.
The pen tool can't draw this all in one go, so when I try to do it in several stages, the lines don't connect up smoothly so it looks a bit... rubbish.
Anyone got any tips or how to do this simply? Sorry if this is a total idiotic question but, I'm trying...!
Cheers

Somehow your picture won't show.

Advice on using Pen tool to create shine effect?

Similar Messages

Maybe you are looking for