Advice reg RFFOUS_C program

Hi all,
we are using RFFOUS_C to print checks.We had a requirement of printing with bottom line software. we have to pass the data from RFFOUS_C to bottom line software.
Right now we copied the orginal program and commented all the forms and passed the data to unix file.
I thought there would be a better way than that. Are there any user exits enhancement points to change the selection screen and decativate all the forms and pass the data to unix file.
If any one of you had the same requirement. I would appreciate the advice .I am on ECC 6.0 system
Thanks

I am in 5.0 ECC now, and I think what you have done is the best solution for your issue, and I feel that is the only best and safest way to solve your issue as there are no exits provided for that program and also the program is not generated by sonme configuration.
I can say that what you have done is right and go ahead with that.
: Remember : The only to say thanks is by rewarding points.
Thanks and regards,
Veerendrnath Maddula.

Similar Messages

Multiple copies for Payment advice using standard program RFFOAVIS_FPAYM

Hi Experts,
I have one requirement, need to print the payment advice form twice (one for account section and other for vedor). According to the existing process it uses standard SAP print program RFFOAVIS_FPAYM OR RFFOUS_C (for cheque payment) to print the output.
When I tried to print the output by giving number of copies, it prints test pages but not the actual output. The actual payment advice note with proper values getting printed only once. I actually need to print this actual payment advice note twice.
Do you experts know how to achive this? is there any configuration available to get this requirement? OR how can i do this without chaning Standard SAP program?
Thanks in advace for your help..
Regards,
Prashant

Hi,
2 times printing can be done using Sap script.however, it would call for changes to your driver prog...
in function call CALL FUNCTION 'OPEN_FORM'....u need to add g_ITCPO-TDCOPIES = '2' and pass g_itcpo to OPTIONS structure of the FM.With this you can ahve 2 copied of ur output. I just test printed it.
So in your case as yours is a standard program, you could probably create a copy of the Standard program and add the above logic in your program.
hope this help
Cheers,
Varna

Bank reference in payment advice after F110 program

Dear Expert,
We have created z program to get the payment details in bank format after running F110 in RTGS/NEFT format. Excel file will be sent to bank. Bank will update in their system.
Bank will confirm the payment made through online to client with bank reference.
I want to update bank reference in payment advice which will send by email to vendor.
How to update bank reference after confirmation received by bank in payment advice ? and email after bank confirmation ( not after running F110)
is there any work around to do so ?
points will be rewarded.
Thanks
Sampat

Hello Venkat,
There are 2 methods ,where Banker directly send payment advice along with Bank ref after making the payment or you can do the bank reco everday end & update bank ref in any of the field in reconcialation document and map accordingly in payment advice
Regards
Mani

Reg:Print program For FB03

Hi All,
In the Fb03 Transaction When i give print Preview I want to show the Document Date as Blank, by default print preview its coming, hoe can i restrict this, i have done the following steps i don't know how to proceed after this, the steps are as follows,
I have Created a new correspondence type as ZFB03 in OB77.
For Allocation Program For Correspondence i have given the Correspondence and company code in OB78
I don't Know what to give in the Form Name For Correspondence Print?
and also i don't know which program i have to copy and change to ZProgram and where to assign it?
Does anybody know how to resolve this issue?

Hi Suresh,
Goto the TCODE OB96 and click on the position and enter your company code..
you will get directly the print program and its form name... the default print program is RFKORD00.
Else you can do like this....
In SPRO follow this path.
ex:-Form 16A
Financial Accounting
Global settings
withholding tax
Extended Witholdong tax
POstings
India
Withholding tax certificates for vendors
maintain no.groups and script forms.
For cheques and Payment Advisory.
Go to FBZP
click on printmethods in company code
click on position
give Company code and payment method
then in the next screen double click on the payment method
This way you will get to see the forms assigned to it.
For Forms for Correspondence.
Financial Accounting
---Global settings
correspondence
define form names for correspondence print.
Thanks & regards,
Dileep .C

Reg:Abap program table name

Hi friends,
Which table contains all the abap programs ?
Thanks and Regards
V.Raja sekaran

Hi V,
Or you can use this transparent table : D010SINF
Thanks
william wilstroth

Your advice about my program: WapcamServer1.3

Hello everyone,
I made a webcam server soft, which has pretty advanced features and transform your usb-cam into an IP-cam.
It has its own webserver, an FTP upload feature as well as motion detection.
I have little feedbask about it, so I'd like you all to tell me what you think about it. What you would expect from such a program, what I did wrong, and of course some bug reports.
Thank you in advance for your help

Hi,
I tried your soft: great job !!!
It just lacks a little documentation, but is quite easy to use.
The webserver is very nice, even the icons are not so easy to read.
Motion detector is waow, very impressive, what library did you use?
I also appreciated that it appears in the tray on mu KDE desktop
Keep up the good work :,)

Need advice picking a program

First of all, if this is the wrong form, may the MOD SQUAD people move it to a good place.
The powers that be above me have decided that since I teach television that I can teach animation (2d and 3d), and have commanded me to start planning a new course in said subject. I know how animation works, and I have done some in Flash, Motion, and a bit in After Effects. However, its not my strong point.
They want me to get a program that can do 2d and/or 3d animation that looks good and can be considered professional. I want one that I can easilly learn over a couple months and is within the grasp of high school students.
And of course, it has to be Mac based. I run a lab with Intel iMacs (if something has to run in Rosetta I don't care, I am not one of those people who gets my jollies ruined because it takes an extra ten seconds for something to render). Most have the seperate graphics cards (some 128, some 256), and either 1 or 2 gigs of RAM. They do not want me to rely on what I have right now... I can use FCP, Motion, AE... but there has to be a new program to focus around. And there is a possibility that I may have to involve a camera for claymation type stuff depending on state standards.
I would be grateful for any suggestions for software for a high school level animation class.
BTW, if this is out of bounds on this board, please forgive me. I figure this is the best place for suggestions, rather than registering at a bunch of random Mac boards.

They want me to get a program that can do 2d and/or
3d animation that looks good and can be considered
professional.
...and/or? Motion is strictly 2d, AE has 3d compositing. If you want to teach 3d modeling/animation, you have to get a program that does just that.
I want one that I can easilly learn
over a couple months and is within the grasp of high
school students.
I have to chuckle a bit. I think 3d animation software has to have one of the highest learning curves in creative applications. If you think you're gonna pick this up quickly, you might be in for a surprise.
I can use FCP,
Motion, AE... but there has to be a new program to
focus around.
So you're teaching a class using FCP, Motion and AE and you want to tack on a fourth program? Yikes, I hope your students are brilliant, because that sort of ciricullum would push most college programs to the brink...
It sounds to me like you have everything you need to handle the 2d stuff, and what you're lacking is something that will allow you to build 3d models and animations. A program like Maya would be total overkill in this situation. While I haven't used it personally, I hear Cinema4D is a lot more approachable for the casual 3d artist.
From the sound of it, this sounds like a highly ambitious class. I hope it goes well.
Mac Pro 2.66Ghz - 3GBs RAM - X1900XT Mac OS X (10.4.8)

Reg:modulepool programming

Hi,
Can anyone please tell me how to solve this issue.That is I developed a module pool program with screen no 100 and to that screen i want to add another screen for example 110 that is after entering the values in screen 100 and when i press Enter key i should enter into screen 110.
Please guide me how to do this

Hi,
Create screen 110. In the attributes of Screen 100, set Next Screen to 110. Now you don't need to call the screen 110 on condition, as you press the ENTER key on the keyboard you will be taken to next screen 110.
Else, if you want on the conditional access, do as given in the above replies.

Reg Standard programs and function modules

Hi Could you please tell how to find the list of
1.standard programs used
2.standard tcode used
3.function module used
is there any table or function module to find the above
Thanks in advance
points will be rewarded

hi,
TADIR - Tables
TSTC - transactions
TFDIR - Function modules.
If you want to search for any table ,
Suppose if you want to search for a table which stores
Country names then just
GOTO SE11 and place the cursor on 'Database table'
press F4,
Click on 'Information system'
then one window is displayed there give short description
and search .
You will get the tables list there you can fine the table which you want.
For any other if you want to find out table which stores all the domain names then click F4 on 'DOMAIN' then search.
to search function modules GOTO SE37 there press F4 then give short description and search. Ok.
Regards,
Rajitha.

Reg: Dialog Programming

Dear All,
I'm new to this group.
Now i'm learning ABAp.
I need a small Help.
I want to insert/Update the data into master tables using Dialog Programming.
How can i do that.
I'm using RF(Radio frequency)devices,which can access the SAP Screens in Character Based Format and from those devices i want to update/recieve the Data in the database.
Please send me the procedure/Code.
Thanks & Regards,
Adi.

Hai Sateesh,
Thanks for your reply.
I'm using RF Hand Held Devices & Barcode Technology for stores Automation.
I want the dialog programming as when ever the user scan the barcode of the particular material,the system will automatically check the Databse and need to show the details of that Particular Material.
For issuing & reciveing & for stock verification i want the dialog programming.
In this How to use BDC's /BAPI's. what isa the advantage of using BDC's/BAPI's?
i don't know much about BAPI Programming.
I devloped one small Dialog Program...
The code look like this.
Delaration of Tables.
Internal table Declaration.
In the PAI Event.
Case sy-ucomm.
when 'save'.
insert mara.
when 'disp'.
select * from mara where matnr = itab-matnr.
endselect.
when 'exit'.
leave program.
endcase.
in the PBI Event
Move-correspondin itab to mara.
with this code i'm able to get the values what ever i entered,and i'm able to save.
What is use of BAPI's & what is the Advantage?
Please Reply me.
Regards,
Adinarayana.B

Reg : Concurrent program

Folks,
I am getting this issue "The concurrent manager to process this request is currently deactivated. Contact your system administrator to reactivate the concurrent manager to allow processing of this request."
My ICM and ST managers are up and running and able to submit the active user
But one program is showing inactive and no manager
pls help me .
Thanks,

Please post the details of the application release, database version and OS.
I am getting this issue "The concurrent manager to process this request is currently deactivated. Contact your system administrator to reactivate the concurrent manager to allow processing of this request."
My ICM and ST managers are up and running and able to submit the active user What about other CMs? There must be one (or more) CM that is in deactivated state and need to be activated.
But one program is showing inactive and no manager What is the program name? And, what CM is processing this program?
Thanks,
Hussein

Reg Concurrent Program Error

Hi All,
I need the concurrent program to be errored out eventhough we are hanndling the exceptions.i.e., Whenever we extracting the data from the cursor and writinginto custom table, if bad records comes , I am handling the bad record in the exception. Program completes normally by inserting good records in the table and bad records in the log files .
I need program should error out if bad records exists after handling bad record in the exceptions. Can any body suggest on this.
Thanks in advance

Hi Srini,
Thanks for your reply.
This is of PL/SQL Stored Procedure Type. Currently we are using 11.5.10.2 with windows OS. I am handling all errors in the exceptions.
My question is Concurrent Program completes normally if I handle my errors in the exceptions. After handling all my errors, My program needs to be errored out instead of success. Is there any code or syntax to error the prgram after handling my exceltions successfully.

Need advice on choosing programs for laying out and editing books

I've been editing books in Microsoft Word but my clients are asking me to help do the layout and prep to take their books to a printer.
I am looking to find out what the least expensive (for now) but necessary programs I would need to purchase in order to take a book from a Word manuscript to print-ready.
Please let me know what programs I need (at a minimum) - someone mentioned InDesign and InCopy, would I need anything else?
I will also need to purchase a new laptop and need to know what the minimum requirements would be to run such programs i.e. how much hard drive space, speed and ram.
I currently have a Gateway, but it is dying.
Thank you.

As Daniel says, if you have InDesign and you're the only one working on the docuument, that's all you need. Think of InCopy as a hugely-stripped-down version with only the text editor in it, but you can do everything you need in InDesign (either writing the text directly into the document, or importing formatted text from Word). InDesign has great typography features and a basic spellchecker, Word has less-advanced typography but can check grammar.
The typical workflow in a newsroom will split copywriting from layout, as the journalists aren't allowed to format the page and the graphics dept can't write articles. So, the text is written in InCopy by a bunch of people, who then pass the content to someone with InDesign who imports it and lays out the issue. InCopy basically allows people to write a chunk of text that will fit in a certain space, but it doesn't care what the overall document looks like. It has some very powerful features for collaboration, but to put it bluntly, text is text - provided you get the styles mapping sorted, ID doesn't care where it comes from.
Unless you're working with this split-job-role system there's no reason you'd need to use InCopy.
OLIVE C. F. wrote:
Thank you for the tips. I will need InCopy then as that is a major part of what I do.
Sent via DroidX2 on Verizon Wireless™

Need Advice reg Implementation

We are using 11.5.9 and we are upgrading to R12 very soon.
One of our sister company already using finance modules and would like to implement HRMS and Payroll. Is it good idea to implement the same in existing version 11.5.9 before R12 upgrade?
Please give me suggestion.
Thanks in advance.

I would recommend you upgrade to the latest version of R12 first. 11.5.9 is in extended support and if you implement HR/Payroll, you will not get legislative updates that are critical for these modules.
http://blogs.oracle.com/stevenChan/2009/06/object_windowed_support_fees_waived_for_ebs_11510_and_10g_db_through_2011.html
Srini

Advice on Slideshow program

I'd like to purchase Fotomagico 3.0 to create personal slideshows. However, I'm confused about the pro vs express versions. My ultimate goal is to play these slideshows on my Sony PS3, which recognizes MP4. Can I just buy the express version and accomplis this task? Or does the pro version allow for the highest quality output? I think the express version will only export high quality .mov files. Does that mean I would need to buy an additional converter? Or would it be a lot easier to buy the pro version?

Hi Jon,
I've used DVDxDV before with success. Easy to use and the quality is pretty good as well. Outputs to quicktime full ntsc file as well (maybe you can do PAL as well if you need it).
quick question and apologies if this sound silly:
you're not using your extracted DVD footage as the final footage are you? Or, is it for dailies? Asking because the final quality won't be as good as the original b/c you are compressing/uncompressing and re-compressing again. I have a feeling you may know this, but i wanted to mention it just in case.
Cheers,
Keebler

Advice reg RFFOUS_C program

Similar Messages

Maybe you are looking for