Advice - T6100 speakers and connectivity

I have been reading the help guide on this website but i still remain confused as to how to connect these speakers to a tv with the surround sound working. Will buying the RCB stereo cables make this fully possible or are there other accessories i need to buy? Do i need a sound card? Any advice would be great and if you could point me in the direction of some good products i would be grateful. Thanks, Sync.

I myself need some help. My television have av sockets (audio & video2 (white + yellow), headphone socket and a scart socket. I think the headphone socket is a no no, i plugged in my earphones and only could hear in one ear, so i guess that's a mono socket.
I would appreciate it if you could help.
Thanks.

Similar Messages

Speakers and Connecting Them

I plugged in external speakers, but my macbook doesn't seem to recognize it or even notice that it's there. Anyone know how to fix this? Thanks.

That's a detail that might have been important - LOL!
Which speakers are they?
I do not have USB speakers, but I believe that you have to go to the system prefs and select the speakers are the output once they are plugged in.
Go to sys prefs -> sound -> output and they should be listed in the box for "Choose a device for sound output."

Airtunes, Wireless Speakers and Airport Express: A Reality?

Hi all,
I have an Airport Extreme Base Station that I use to wirelessly connect my iMac and pc to the internet and a common printer. Last week, I purchased the Airport Express (AE) to allow for me to play the music from my iTunes library (on the iMac) on some speakers in my backyard during a party. I wound up purchasing some decent computer speakers and connected them to the AE vis-a-vis a 3.5mm stero jack.
Ideally, I want to purchase some really good, wireless outdoor speakers, but I do not know how I would be able to utilize the AE in conjunction with a wireless speaker system. Again, my understanding is that a 3.5 mm stereo jack connecting the speakers to the AE is required to enable Airtunes to play via the AE.
Can anyone suggest a way that I can get Airtunes to play through the AE over wireless speakers without the stereo jack? Are there any wireless speakers that include a subwoofer that would connect to the AE via the 3.5mm stereo jack and then transmit to the speakers via bluetooth?
Thanks in advance for any help!

^^ Thanks, Duane. But how about a situation where the wireless speakers are equipped with a receiver: theoretically, could I attach the receiver to the AE via the 3.5 mm stereo jack and then place the wireless speakers anywhere I desired (within the range of the receiver, of course)?

I have OS 10.8.2 and connected the scanner Canoscan Lide110. I downloaded the drivers, looked installed, the scanner appears in the system preferencies, but it doesn't open!!! what i have to do? thanks in advance for your kind advice!

I have OS 10.8.2 and connected the scanner Canoscan Lide110. I downloaded the drivers, looked installed, the scanner appears in the system preferencies, but it doesn't open!!! what i have to do? thanks in advance for your kind advice!

Thanks for your help Karen Serena. Obviously, it appears in the list of printers and scaners on the left, into the "Print and Scan" with system preferencies. Then i click it , it appears on the right, then i click "open scanner" below the name and opens a window writing "open device failed". When i connect the scanner, it makes a sound but that's all...the scanner is dead, even if I push any button...Also there isn't any window opened to prove the function of the scanner, only is shown in the scanner list, that's all.

I downloaded the iOS7 system and lost connectivity to my in-ceiling speakers and Air Play. How do I get it back?

I downloaded the iOS7 system and lost connectivity to my in-ceiling speakers and Air Play. How do I get it back?

Use the iOS7 Control Center to select AirPlay, and then, choose the appropriate AirPlay speaker to stream to.

Connecting DVD player, speakers and stereo receiver to mac pro

I'd like to 'integrate' my living room system with my Mac Pro.
This entails connecting my living room speakers and digital DVD player to my Mac. My stereo receiver is outdated so I plan to buy a new one. The reason I want to connect the DVD player is so I can use the remote control with it. Unless there's a remote I can buy for the Mac Pro ?
(1) What cables do I need to connect a stereo receiver
(2) Can anyone recommend a good receiver that's compatible with Mac
(3) What do I need to connect my speakers to my Mac ? The speaker connect with standard speaker wire, + and -
thanks

I'd like to 'integrate' my living room system with my Mac Pro.
This entails connecting my living room speakers and digital DVD player to my Mac. My stereo receiver is outdated so I plan to buy a new one. The reason I want to connect the DVD player is so I can use the remote control with it. Unless there's a remote I can buy for the Mac Pro ?
There are several remotes for the Mac Pro that will control its DVD player, such as
<http://www.tripplite.com/en/products/model.cfm?txtSeriesID=517&txtModelID=3910>
(3) What do I need to connect my speakers to my Mac ? The speaker connect with standard speaker wire, + and -
The Mac Pro can't drive speakers directly. You need powered speaker, ao an amplifier.

Connecting speakers and headset together on Qosmio G30

My question is, if it is possible to use two different audio out on Qosmio G30. It has two connectors, but seems to be connected together. I want to use my Qosmio with virtual DJ, one audio channel for speakers and one for preparing music (for headset). I want to have one music on speakers and one on headset for better mixing.
Is this possible, or must I buy one more external audio card? Is this inside audio card two channels or not?
Thanks

Hello
I have made follow test: Qosmio G30 connected to LCD TV. One headphone port connected to TV and second one to my headphones. On both sides I have had sound (the same music). After changing ports the sound was still there.
I can say follow: You can hear just the same music on both ports at the same time but if you want to use two different things I think you must buy some external solution.

Connecting 2.0 speakers and heads

Hi there
Im having the connection blues with my newly aquired Audigy 2 ZS.
I want to have both my 2.0 speakers and headset (Headphones and mic) connected at the same time. What I WOULD prefer was to be able to connect the front speak/mic connections from the pc case to the soundboard, but that seems not to be possible at all.
Please correct me if Im wrong though
The alternati've is to connect the speakers to line out , the headphones to line out 2 and the mic to the mic in connector. But how do I then configure the software to put out the signal on both connectors?
Please help me, Im having the connection blues...
Cheers. Peter

pedefup wrote:
Hi
Reading up on other posts on the same topic somewhat yielded that answer as well...
I cant say much else that Im really disapointed.
Most motherboards with onboard sound having the ability to do this out of the box, yet a very expensi've, apparently defacto standard, stand alone soundcard dont support this VERY basic feature?
Im in the market for something else then, sad sad product this is...
Cheers. Peter.
The standard basic feature is to use audio output device with the sound card. So what's wrong with that? Even with onboard sound, they have only output jack for device at the rear. If you are referring to the pc case front jack, you could always get the platinum version of the sound card to do the same too. Anyway, using splitter is the best and most easy way in my opinion too. Alternati'vely, you can set the speaker to 4/4. in setting. Connect the headphone to the lineout 2 on the card, go to eax console and enable stereo surround cmss.

Connect an ipod to external speakers and amplifer

how can i connect an ipod to external speakers and amplifer

Rex,
Since the toslink is optical, the 3.5mm adapter will not work for you as it is only ment as a conversion to a mini-toslink cable. Your first option of using the DAC, is in my opinion the best and perhaps only way to get audio out without going to a fancy amp or tuner first.
One option that I'm considering is the Bose Solo TV sound system. It might set you back about 4-Grant's, but I generally enjoy the sound of bose for most music/tv/movie purposes; and it has a direct optical audio input that you can run either from your tv or your ATV. Whatever audio you're sending to your TV via the HDMI, should go to these speakers through your HDTV's toslink output with equal digital clarity.
I've read a few other posts on the apple discussion forum which lead me to believe that the optical output of the ATV might not work so well after the 5.2 update... so whatever I do, it won't be JUST for use with the ATV.

I find there is a slight delay between my macbook speakers and external speakers connected via Airport Express. Is there a way to rectify this? Thanks!

Music plays out of sync between my computer speakers and externally connected throught Airport Express speakers.

Unfortunately, I don't have either a Slingbox or iHome speakers so I won't be able to reproduce any of the issues you are having. With the fact that you live in large apartment complex would still lead me to believe that Wi-Fi interference may be the reason that you are having streaming issues.
I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible.

My BEATS speakers are connected to my Mac but I have no audio and do not understand how to turn off the speaker. I press the power button and not shut off. And the white light behind me indicating that this synchronized, does not turn off ever.

My BEATS speakers are connected to my Mac but I have no audio and do not understand how to turn off the speaker. I press the power button and not shut off. And the white light behind me indicating that this synchronized, does not turn off ever.

Hello Sabroso007
Check out the article below to troubleshoot the sound output to your Bluetooth speaker. Check in System Preferences > Sound to see what the output is set to.
OS X Mavericks: Set up Bluetooth audio devices
http://support.apple.com/kb/PH14217
Regards,
-Norm G.

Problem with audio of my notebook. Audio works through pc speakers and earphones at the same time

Hi all,
thanks in advance for your advices.
I have a problem with my notebook (HP pavilion g6 2305 sl).
The problem is that when I connect my earphones the audio of my pc don't stop, hence I can hear (music, film, ...) both by earphones and speakers at the same time.
I tried to install again the latest driver audio, but nothing was changed.
I tried to use another pair of earphones, but nothing.
I have noted that if I connect the Jack at my pc, but not until the end, the audio stops from the speakers and goes through the earphones, but only if the jack is not completly inserted in the notebook.
I read a lot of forum on the web but I'm not able to find a solution for my problem.
(ps. the problem comes out suddenly, without any signal. I don't have installed any update or new software before the problem's start)

Right click on speaker icon, lower right screen.
Choose playback devices.
Select "speakers and headphones" as your default.
Disable "communications headphones".

IMac external speakers with connection problems to other devices

I've got two sphere like little speakers of a defective "lamp" iMac and would like to connect them elsewhere. I skinned the cable and found 3 wires (blue, white, outer wrapped around) instead of 2 expected. How shall I attach them to my audio device?
I'd love you giving me helpful advices.

Do the speakers look like the "ball" speakers shown in this image:
If so, they are Apple Pro speakers and the third wire is for power. They used a special jack that supplied their power and cannot get power from a conventional audio-out port.
There was an adaptor from Griffin Technologies called the iFire ( http://www.griffintechnology.com/support/ifire ) that let you use Apple Pro Speakers on conventional audio ports, but it is out of production and those still on the market demands more than many used Macs are worth. I saw one on Amazon for US$300!
I suggest you do your own search for "griffin iFire" to see if you can fins a cheaper iFire.

Inspire T6100 - Sound Card Connectivity

Hi Guys,
I just got a set of T6100 speakers, but I'm unsure of how to connect them to my PC. I currently have a very old Soundblaster Live! card, which only has Spdif,mic in, line out and rear out. However, the speakers have the orange/green/black cables and I don't know which goes into where. Could anyone please advise me on how to connect the speakers to my soundcard?
Also, I'm currently looking around for a new soundcard, but don't want to spend a fortune on it. Could anyone recommend a compatible soundcard (preferably the X-Fi series)?

amzngbac,
In order to fully optimize the 7.1 speaker you have, you will need to get a sound card that support 7.1 speaker system. The Audigy 2 ZS series range support this.
http://us.creative.com/products/prod...04&product=495
Jason

Can I listen to music from my Apple TV to self - powered speakers and watch regular tv at the same time? I don't have a central receiver that splits everything, just the apple tv and the speakers.

Trying to play music from my apple tv directly to speakers and at the same time watch tv. Now I'm not that advanced at technology so I kinda need the easiest way to do this. Now I see that the Apple tv has an optical audio output. Can I set that optical out to self powered speakers and then have regular RCA cables set out from the tv to the same speakers and watch the tv on mute, unless I want to turn it up for a moment. I want to be able to airplAy music through my apple tv but also put a game on at the same time if I have guest. I hope my question was clear enough, but that's the best that I can explain it. Oh by the way, I do not have one of those centrAl hub receiver where all the speakers are plugged into and where you can set different inputs and outputs out of it. Everything would be a direct connection.

yes. u dont need the tv. turn it off.
1. direct connection (optical or stereo cables) to your amplifier
2. use mac to play to atv, or iphone/ipod touch to remote control the atv. (wifi)
works as a charm, Ive done this for several years..

Advice - T6100 speakers and connectivity

Similar Messages

Maybe you are looking for