Advice when upgrading

Hi
I will be shortly upgrading from SAP NW PO 7.31 SP8 to SP14. I am currently reviewing the changes I can expect to see but I am looking for advice.
Are there any bugs or surprises I should be aware of. Anything I should prepare for? Anything that may cause delays during the handover process? Does anyone in the community have simiar experience?
I hope it will be a smooth upgrade but I like to be prepared
Regards

Thank you to everyone who has replied to my question and gave me the re-assurance I needed. I apologise for only getting back to the topic now as I am only just back online for today.
I know for sure I will not be running Vista on a Mac (I am not even going to be running it on a PC even though I have the full retail Ultimate disc)
I have purchased from Crucial in the past for my PC's and laptop and know they are a good company to deal with. I will read the details from the links given here as these will help to give me the confidence even though it will be a first time Mac that I will be able to upgrade RAM myself.
I really appreciate the advice that even the 2GB which would come installed may be enough for me as I don't do video edits etc I am just used to Windows eating RAM for everything. This would be good as I could purchase and use with the 2GB and then when I am more confident with a Mac I could then decide to upgrade RAM if necessary.
Unfortunately we don't even have an Apple store (only PCworld which has about 2 Macs :() for me to really see how Macs work although I have read books and followed podcasts a lot which should help me to get the basics and hopefully end up wondering why I stayed with Windows at all. I have stopped enjoying my computers and saw enough of Vista in Beta to make me think of this switch.
The Mac Pro may be over and above my needs but as it will replace desktops and a laptop I feel it should be fine especially when I learn the new things which will no doubt puzzle me at the beginning.
I will now go back to configure again knowing I can ingnore the RAM bit and decide on the processor and screen. Thanks to everyone this has been most helpful.
My question was solved by everyone's contribution to the topic unfortunately I don't seem able to mark each post with solved.
Message was edited by: minib

Similar Messages

  • TS4009 I had an advice to upgrade 5 apps i already have on my ipad. I clicked to upgrade them all, but they are all in "waiting" and jammed.could someone tell me how to solve this problem iI have since i downloaded iclous

    I had an advice to upgrade 5 apps i already have in my ipad.
    I clicked to upgrade them alltogether but they all jammed.
    Each icon shows  "in waiting" since I installed Icloud, I have this kind of problems.
    Hope someone can help me.
    thanks.
    Paul

    ok,
    At this little tutorial here:
    http://www.developer.com/tech/article.php/610011
    It says
    "The Document interface is the content model for Swing text components. Every Swing text component has an instance of Document associated with it. The Document contains both the content for its component as well as any style information for the rendering of the content. All content is stored in the Document's Element array. Style information is stored in each Element as an AttributeSet. We'll get into AttributeSets in the next article, when we discuss styled text components. "
    Mainly concentrating on :
    All content is stored in the Document's Element array. Style information is stored in each Element as an AttributeSet.
    This would indicate that each time a new attribute is applied to something that it is stored as a separate String in an array, along with the attribute relating to it, would it ?
    I've looked here:
    http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/JTextPane.html#getParagraphAttributes()
    And here :
    http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/text/Document.html
    But still cannot figure out a way to do this, I presume I must get at the Document 'array', and if I had this everything would be fine.
    Should I run through every single charactor in the 'editable' JTextPane, check its attribute and add it my my own special made class?, and pass this class to 'non-editable / viewable-only' JTextPane ?
    Any opinions would be very helpful.

  • How to transfer data & apps,When upgrading from a iPhone 3G to an iPhone 4 or soon 5

    When upgrading from a iPhone 3G to an iPhone 4 or soon 5
    How to transfer all phone number and apps and notes, pretty much copy my old iPhone to my new iPhone , all content and apps.
    Will it transfer my text messages also?
    Is this a nightmare or an easy task?

    Connect to iTunes and backup. Then when you receive the new phone restore from that backup.
    http://support.apple.com/kb/ht1766
    http://support.apple.com/kb/ht1414

  • Access denied when upgrade SharePoint app in on premise deployment while it succeeds in fresh deployment

    We deployed a SharePoint hosted app then used it for a while then we needed to upgrade it to be provider hosted app.
    we used the same AppID and name with the new package then uploaded the package to the app catalog.
    the old app in the site contents now has a note that there is a newer version and prompts to upgrade.
    the upgrade fails with access denied even for site collection administrator.
    is there really some permission issue or the upgrade can't be done?
    We are volunteers, if the reply help you mark it as your answer. thanks!!

    Hi,
    According to your post, my understanding is that you got access denied error when upgrade the SharePoint hosted app to provider hosted app.
    How did you upgrade a SharePoint hosted app to a provider hosted app?
    They are two different type apps, why not just create a new provider hosted app?
    To create a provider hosted app, we should create a certificate that is used as “security token issuer”.
    There are two articles about creating provider hosted  high trust app, you can have a look at them.
    http://blog.karstein-consulting.com/2013/01/08/create-provider-hosted-high-trust-app-for-sharepoint-2013-short-guide/
    http://msdn.microsoft.com/en-us/library/fp179901.aspx
    What’s more, there is an topic about the troubleshooting tips for SharePoint high trust app, you can refer to it.
    http://blogs.technet.com/b/speschka/archive/2012/11/01/more-troubleshooting-tips-for-high-trust-apps-on-sharepoint-2013.aspx
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Error 3194 when upgrading to ios 7.

    I receive error 3194 when upgrading to ios7 on my iphone 4 ( and I really don't know if it is 4s or just 4).  I am working though the itunes softward on my home computer.  It seems I am stuck in something called recovery mode.  I have tried a variety of suggestions found on the web (e.g., editing a "host" file, checking firewalls and connectivity, etc.) to no avail.  Any suggestions?

    The iPhone was either previously jailbroken (the DFU restore should have fixed that) or it has a hardware error. I would vote for the latter.

  • Receiving a -43 error message when upgrading to ios5.

    How do you get past error code -43  when upgrading to ios5 on ms vista??

    The only solution that I've found was here
    http://gizmodo.com/5849160/the-complete-guide-to-updating-to-ios-5&rct=j&sa=X&ei =bnaWTrPYKYekmQXR9_WFAg&sqi=2&ved=0CCoQ-AsoADAA&q=iphone+ios+5+error+-43+when+ba ckup&usg=AFQjCNGGVjsr_rky-tiplqdj-1fBfXofPA
    and here
    http://www.macworld.com/article/162925/2011/10/how_to_upgrade_your_ios_device_to _ios_5.html&rct=j&sa=X&ei=bnaWTrPYKYekmQXR9_WFAg&sqi=2&ved=0CC4Q-AsoATAA&q=iphon e+ios+5+error+-43+when+backup&usg=AFQjCNEBBPx-ymDJPGPd-sBy8TZ1dDTbeQ
    by:
    1. Doing backup.
    2. Using the Restore button and following the
    All works fine now and all the settings are there.
    BTW: it took over 2 hours to restre and that is with lots of apps and without songs, phothos and movies... that I removed before.Gizmo link above.

  • Why don't the ratings transfer when upgrading Lightroom to a new version? I no longer can sort using ratings--which took a lot of time to create.

    I have given many of my photos ratings, but the ratings don't come over when upgrading Lightroom to the newest version. Anything I can do to recreate my ratings?

    Press CTRL+SHIFT+DEL, change the top option to '''Everything '''and in the bottom menu, checkmark '''Cache '''(uncheck all the others). Then click '''Clear Now'''.
    Then go to '''Tools''' | '''Options '''| '''Advanced '''and in the Network tab | Offline Storage menu, click '''Clear Now'''.
    Then go to '''Tools '''| '''Options '''| '''Privacy''', click '''Show Cookies '''button and delete the cookies for lumosity.com.
    Then try again.

  • Error in "tempInit" when upgrading Flash MX AS2 FLA to Flash CS6 AS3 FLA

    I experienced a compiler error in "tempInit" when upgrading an AS2 project to AS3.  "tempInit" is something internal to Flash Authoring, because it doesn't exist in my project and other people have gotten the same error.
    I've read about this problem, and everyone thought it was because of an instance with a bad name, such as one that includes spaces or equals a keyword or something like that, and people have shot down the idea that the problem is with the library symbol, but I'm convinced now that it's a corrupted library symbol.  Here's why:
    I had 8 instances of a particular movie clip on stage, each on a different frame.
    When I deleted the symbol from the library, the compiler error went away (but so did my stage instances).  So that simply tells me that the problem is with that particular clip (I originally had to delete each clip in my library one at a time and recompile to determine the offending clip), but that obviously didn't rule out the name problem since the stage instances get removed when I deleted the corresponding library symbol.  Still, I knew it couldn't be a name problem, because all instances had a valid name "mainidea".
    I ruled out the name problem by creating a new library symbol identical to the first (it's just a few text fields with a rectangle drawn around them).  Without changing the names of the existing instances on stage, I used the "swap" button to swap in the new library symbol.  The use count on the old one dropped to zero, and the use count on the new one went up to 8.  The compiler error was gone, and it only went away once the use count for the old symbol was zero.
    The old and new library symbols are identical as far as I can see.  Same child objects at the same positions, same textfield content, same child instance names, no ActionScript code, etc.  Since there was no discernible difference, I came to the conclusion that the original library symbols had somehow been corrupted under the hood, somewhere in the pipeline between opening an old Flash MX file and setting the flash player version to 11.4 and selecting AS3 as the script language.  Somewhere in that process, the Flash Authoring environment screwed something up.  Does anyone know anything about this problem?
    I have hundreds of files I need to upgrade, and that symbol was copied to each of them as they were created years ago, and I think I'm going to experience this problem with all of them.  It's time-consuming to duplicate the old symbol and replace all the instances for every single file, so I'm trying to find the source of the problem and a workaround to avoid it.

    It works, but slowly as if somer AS1 code is interpreted into
    very
    ineffective machine code by AS2 interpretor
    My question was if it is know which particular AS1 features
    have these
    problems in AS2
    "ggshow" <[email protected]>
    ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ
    × ÎÏ×ÏÓÔÑÈ
    ÓÌÅÄÕÀÝÅÅ:
    news:f17r79$efu$[email protected]..
    > some AS1 not working when the movie run in AS2...
    > if you want to publish it as AS2, then write it in AS2.
    >
    > * it is time to learn AS3
    >

  • Hard Drive warning when upgrading to Mountain Lion. 2 try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

    Hard Drive warning when upgrading to Mountain Lion. 2nd try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

    Yes.
    Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.
    When you see a white screen with an Apple logo in the middle, you can release the keys.
    Click Disk Utility, and then click Continue.
    In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
    Click First Aid.
    If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
    Click Repair Disk.
    If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done.
    Otherwise, you may need to do one of the following steps.
    If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.
    If you continue to have problems with your disk, it may be physically damaged and need to be replaced

  • I lost my Visual Voicemail when upgrading to iphone 5. New phone was set up from itunes backup of iphone4 but my Mac tells me there is an iCloud back up of my phone prior to this date. Will my Vis Voicemail be on this and can I get it on my new phone?

    I lost my Visual Voicemail when upgrading to iphone 5. New phone was set up from itunes backup of iphone4 but my Mac tells me there is an iCloud back up of my phone prior to this date. Will my Vis Voicemail be on this and can I get it on my new phone?

    I see.  Apple's documentation on what is included in the iCloud backup doesn't explicitly say that it contains voicemails, but that doesn't mean it does not.  You would just have to try restoring the backup to find out. 
    To restore to your iCoud backup you have to start by erasing the phone.  Go to Settings>General>Reset and tap Erase All Content and Settings.  Then go through the setup screens on the phone and when given the option, choose Restore from iCloud backup.  You will then sign into your iCloud account, accept the terms and conditions, then choose the backup you wish to restore from.  To see an older backup, you may need to tap "Show older backups" (see image below).  Be sure your phone is connected to wifi and your charger as this may take some time to finish.
    If this does not recover your voicemails, you can check to see if you have an older iTunes backup that may contain them.  Available backups are shown in iTunes Preferences>Devices on the Backups list.
    If all else fails, you could try contacting your carrier.  Voicemail is a carrier feature and they may have an archive you could access.

  • XMP data not showing up in the custom file info panels when upgraded to CC

    For several versions of Photoshop, I have been able to use a modified custom file info panel to input, update, and track psd files. With each version of photoshop there are always some changes in the way the object data is handled. The lastest challenge is:
    1. XMP data not showing up in the custom file info panels when upgraded CC from CS6.
    2. Raw data is not visible in CC in the File info panel.
    3. This occurs in new documents where we create the xmp wrapper while the file template is built.
    4. When metadata is manually entered into the file, the data is not added to the XMP wrapper when it is recreated on the save.
    5. When a file that was created in CS6 is opened that contains the Metadata in the file info template. It is visible. the Raw data is also visible. Once the XMP wrapper is recreated - write and then close. The data is no longer available. the Raw data will not pull up in the file info panel.
    Any feedback or a direction will be appreciated.

    I have a script that the user runs to input xmp data into a Customized version of the generic file info panel. it is data that is gathered from the user when the psd file is created. once the file is open in photoshop. the information is visible in the File info panel , the raw data, and as a schema addition in the advanced tab.
    in CC the nodes and the children of the XMP packet have changed positions. so that the XML -this.XMP.child(0).appendChild(this.createNode())
    is no longer the node that can be appended.
    Where XML.child(0).elements().length(); would enable the xmlns to be added in CS6
    <rdf:Description xmlns:phsa="' + this.namespace + '" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:x="adobe:ns:meta/" rdf:about="" />'
    it is visible in CC as namespace in a different arrangement. XML.child(0).child(0).namespaceDeclarations().toString()) and the children are  XML.child(0).child(0).elements().length().toString()); There are now 7 child nodes where before there were 1.
    with all shifted, the initialize of the values and the delete XMP packet wrapper and create new or the amend to the XMP packet wrapper is undefined.

  • Encountered error 6  when upgrading Iphone 5s from 7.1.2 to 8.3

    I encountered error 6  when upgrading Iphone 5s from 7.1.2 to 8.3
    I've tried upgrade iphone on three computers , the results are all the same.
    One of the computers successfully upgrade my ipad to 8.3.
    There are 2GB left on IPhone 5S before I perform the upgrade.
    It should be enough for iTunes to finish the process, right?
    But in the log, it says  "copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device"
    why is that?
    Any way for me to continue the upgrade?  it seems it's almost done.
    Thank you
    the end of the log  is as below:
    [10:36:29.0714] Could not find libAppleSWDHIDFlashUpdater.dylib
    [10:36:29.0714] entering fixup_var
    [10:36:29.0714] entering update_var_directory_hierarchy
    [10:36:29.0714] replace_data_partition_path: moving /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets
    [10:36:29.0714] copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device
    [10:36:29.0714] copy /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets failed: 0x2
    [10:36:29.0714] unable to copy directory: 2
    [10:36:29.0714] failed to replace path mobile/Library/PreinstalledAssets: 2
    [10:36:29.0714]
    [10:36:29.0714] ==== end of device restore output ====
    [10:36:30.0280] AMRAuthInstallDeletePersonalizedBundle
    [10:36:30.0421] <Restore Device <<<<<IMEI>>>>>>0>: Restore failed (result = 6)
    [10:36:30.0542] Restore completed, status:6
    [10:36:30.0542] Failure Description:
    [10:36:30.0542] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: 6
    [10:36:30.0542]    Depth:1 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - Failed to handle message type StatusMsg）
    [10:36:30.0542]       Depth:2 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - failed to fixup var）

    Hello there, Kenduck.
    It sounds like you are trying to update your iPhone 5s to the most current version of iOS and are getting an Error 6 message. The following Knowledge Base article offers up some great information in regards to that very error message:
    Get help with iOS update and restore errors - Apple Support
    Particularly:
    Check your security software
    Errors: 2, 4, 6, 9, 1611, 9006.
    Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
    If you still see the error message, check for USB connection issues.
    Thanks for reaching out to Apple Support Communities.
    Kind Regards,
    Pedro.

  • Error when upgrade Oracle client 9.2.0.5.0 to 9.2.0.5.3

    Hi all,
    I'm new with Oracle community so I hope you guys can help me and give me some suggestion with my case.
    I got an error when upgrade Oracle client 9.2.0.5.0 to 9.2.0.5.3
    I tried many times but can’t do upgrade successfully
    This the error message I got when doing the job:
    [ http://picasaweb.google.com/hoagao84/Oracle#5443442931867670386]
    Appreciate your help.
    Log files:
    Command arguments are: apply
    OPatch version is: 1.0.0.0.48
    Using ORACLE_HOME/oui to look up oui libs...
    Oracle Home = d:\oracle\ora92
    Location of Oracle Inventory = D:\oracle\ora92\inventory
    Oracle Universal Installer shared library = D:\oracle\ora92\oui\lib\win32\oraInstaller.dll
    Path to Java = "D:\oracle\ora92\jdk\jre\bin\java.exe"
    Location of Oracle Inventory Pointer = N/A
    Location of Oracle Universal Installer components = D:\oracle\ora92\oui
    Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
    Checking if this is a RAC system...
    Accessing inventory... This may take up to 300 seconds.
    (retry 10 times, delay 30 seconds each time)
    System Command: ""D:\oracle\ora92\jdk\jre\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -classpath "D:\oracle\ora92\oui\jlib\OraInstaller.jar;D:\oracle\ora92\oui\jlib\srvm.jar;D:\oracle\ora92\opatch\jlib\opatch.jar;D:\oracle\ora92\oui\jlib\xmlparserv2.jar;D:\oracle\ora92\oui\jlib\share.jar;.:D:\oracle\ora92\jlib\srvm.jar" opatch/O2O "d:\oracle\ora92" "D:\oracle\ora92\oui" opatch.pl 1.0.0.0.48"
    Result:
    output to OPatch:
    IS_CLUSTER=0
    CHECK_CLUSTER=1
    NODE_LIST=NULL
    NODE_COUNT=0
    LOCAL_NODE=NULL
    IS_CFS=0
    RAC_CODE=0
    HOME_INDEX=1
    This is not a RAC system
    Interim Patch ID: 3738339
    Checking the patch inventory.
    Component Name: oracle.rdbms
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.rdbms_rsf
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.oracore_rsf
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.xdk_rsf
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.dbjava_rsf
    Component Version: 9.2.0.5.0
    Component Name: oracle.java.javavm.javatools
    Component Version: 9.2.0.5.0
    Component Name: oracle.cartridges.context
    Component Version: 9.2.0.5.0
    Component Name: oracle.cartridges.locator
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.net_rsf
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.ldap_rsf
    Component Version: 9.2.0.5.0
    Component Name: oracle.emprod.oemagent.base_oemagent
    Component Version: 9.2.0.5.0
    Component Name: oracle.isearch.is_common
    Component Version: 9.2.0.5.0
    Component Name: oracle.options.olap.cwmlite
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.nlsrtl_rsf
    Component Version: 9.2.0.5.0
    Bugs fixed by this patch 3738339:
    3741539 : LOGICAL STANDBY FAILS ORA-1422 MERGING PARTITIONS WITH LOB COLUMN
    2800494 : KCBZIB XHINT FORCES SINGLE BLOCK READS INADVERTENTLY FOR SINGLE INSTANCE
    3239873 : EXTREMELY HIGH PARSING TIMES WITH AND BETWEEN IN ORACLE 9.2.0
    2918138 : ORA-600 (KOHDTF048) WHEN USING PIPELINED PL/SQL TABLE FUNCTIONS
    3575743 : 2004-S144E
    3554319 : APPSST; ORA-00600 [KQLUDP2] RUN DURING APPS UPGRADE
    3666502 : ORA-00600 [1236] RANDOMLY OCCURING
    3752406 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5 FOR BUGS LISTED BELOW
    3528282 : 2004S075E
    3412818 : REPEATED MESSAGES IN LGWR TRACE
    2690205 : 2003-S190E
    3543125 : 2004-S089E
    3571233 : 2004-S141E
    3458446 : 2004S059E
    2810394 : LNXN2PD RETURNS SCALE OF 42 WHEN COVERTING ORACLE NUMBER 0. TO PACKED
    3323435 : 2003-S126E
    3356103 : ORA-600 [OPIBND0; OACCSID] IN PARALLEL QUERY SERVER P001 EXECUTING OLAP QUERY
    3668224 : CBO CALCULATE LOWER CMPTD CDN AND LEADS TO BAD EXECUTION PLAN.
    3492040 : ORA-600 [KGHFRF1] SELECTING FROM V$LOGMNR_CONTENTS
    3150750 : SM; (DBMS_STATS/AUTO_SAMPLE_SIZE) ESTIMATED NDV IS WRONG WITH HIGH SKEWS
    3566469 : 2004-S138E
    3320622 : 2003-S191E
    3749394 : SCORE() FOR FUZZY TEXT OPERATOR DIFFERENT FOR FUNCTIONAL VERSUS INDEX ACCESS
    3609791 : PSR 9.2.0.5.0 BREAKS CALL DB2 STORED PROCEDURE WITH DECIMAL PARM. SQLCODE -310
    3698501 : CGS/IMR GENERATES SAME SEQ/INCARNATION NUMBER AFTER RECONFIG
    3668572 : ORA-979 WHEN CURSOR_SHARING=FORCE OR SIMILAR
    3179637 : UNABLE TO CREATE AN ORACLECONTEXT ON AD UNDER A CHILD DOMAIN
    3571226 : 2004-S140E
    3240280 : JOBS SUDDENLY STOP ALTHOUGH NEXT_DATE <= SYSDATE
    2964252 : LPX-00252 WHEN PARSING VALID XML / DTD FILE
    3617519 : TRANSFORMATION FAILING WITH ORA-932 INCONSISTENT DATATYPE
    3172282 : ORACLE CORE DUMPS WHEN TRY TO LIST ALL ACES FOR A SPECIFIC ACL
    3637624 : WRONG RESULTS WITH DISTINCT COUNT AND UNNESTED EXISTS SUBQUERY
    3542588 : SAME EVENT 38041 USED FOR BUG FIXES 3444115 AND 3131551
    3358490 : ORA-00600 [KQSCCCK;1],[],[],[],[],[],[],[]
    3177513 : WRONG PLAN - JOIN NOT AVOIDED USING BITMAP JOIN INDEX IF UNIQUE INDEX TOO
    3509265 : SHUTDOWN DID NOT COMPLETE WITH WAITING FOR INSTANCES TO LEAVE; 2
    3516951 : BAD EXECUTION PLAN WITH MERGE JOIN CARTESIAN IN TEMP TABLE
    2954891 : ORA-600 KJMXMPM;DIFFUS], [990307644], [990307644], [3304659678]
    3388633 : LOGICAL STANDBY APPLY STOPPED WITH ORA-00600; [17090]
    3371796 : EXPLAIN PLAN HANGS ON KKORMINL
    3622875 : ORA-1499 AND ANALYZE TABLE VALIDATE STRUCTURE CASCADE ONLINE
    3412136 : BAD EXECUTION WITH MERGE JOIN CARTESIAN IN ORACLE 9.2.0.4 AND MERGEFIX 3363655
    3540576 : 2004-S083E
    3575747 : 2004-S145E
    3566813 : CTAS WITH UNION ALL AND ORDER BY RESULTS IN ORA-3113
    3811906 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5
    2824035 : FXD; ORA-22921 CAUSING 4 DIFS IN LRGXG2.
    3354470 : 2003-S195E
    3518909 : UGA MEMORY NOT RELEASED AFTER USING XMLPARSER
    3617042 : BAD PLAN FOR SCH-XMLTYPE BASED WITH COLLECTIONS MAPPED TO OCT
    3583686 : MEMORY ALLOCATION ERROR DURING SPATIAL QUERY
    3597640 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5.0
    3559212 : WRONG RESULTS RETURNED WITH 9.2.0.4 AND CBO
    3625370 : CGS/IMR RECONFIGURATION GOT HUNG DURING A NEW MEMBER JOINING
    3475932 : CROSS INSTANCE ARCHIVE LOG NOT GENERATED REMOTELY
    3635177 : PSRC; ORA-7445 [KXCCUIN] POSSIBLE FROM DML
    3430832 : ORA-600 [25012] AFTER CREATE OF INDEX ONLINE PARALLEL ON PART TABLE
    2338704 : FXD; 1; QUERIES ON COLLECTIONS STORED IN OUT-OF-LINE TABLES ARE NOT VIEW MERGED
    3253770 : 9I-GSI-CRITICAL PROGRAMS TIME OUT WAITING FOR LIBRARY CACHE PIN
    Reading patch XML files and doing sanity checks.
    Read the command to action file map.
    Performing initial safety check.
    Checking active processes:
    Accessing inventory... This may take up to 300 seconds.
    (retry 10 times, delay 30 seconds each time)
    System Command: ""D:\oracle\ora92\jdk\jre\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -classpath "D:\oracle\ora92\oui\jlib\OraInstaller.jar;D:\oracle\ora92\oui\jlib\srvm.jar;D:\oracle\ora92\opatch\jlib\opatch.jar;D:\oracle\ora92\oui\jlib\xmlparserv2.jar;D:\oracle\ora92\oui\jlib\share.jar;." opatch/CheckConflict "D:\oracle\ora92\oui" "d:\oracle\ora92" opatch.pl 1.0.0.0.48 3738339 "3253770 2338704 3430832 3635177 3475932 3625370 3559212 3597640 3583686 3617042 3518909 3354470 2824035 3811906 3566813 3575747 3540576 3412136 3622875 3371796 3388633 2954891 3516951 3509265 3177513 3358490 3542588 3637624 3172282 3617519 2964252 3240280 3571226 3179637 3668572 3698501 3609791 3749394 3320622 3566469 3150750 3492040 3668224 3356103 3323435 2810394 3458446 3571233 3543125 2690205 3412818 3528282 3752406 3666502 3554319 3575743 2918138 3239873 2800494 3741539 " C:\TEMP\patch92053\3738339\etc\config\actions"
    Result:
    d:\oracle\ora92\opatch\opatch.pl version: 1.0.0.0.48
    Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved.
    Error in executing Java program to check conflict
    ERROR: OPatch failed during pre-reqs check.

    This is all the message when I run command in CMD prompt.
    C:\temp\patch92053\3738339\perl d:\oracle\ora92\opatch\opatch.pl apply
    Opatch Version 1.0.0.0.48
    Perl Version 5.008007
    Oracle Home = d:\oracle\ora92
    Location of Oracle Inventory = D:\oracle\ora92\inventory
    Oracle Universal Installer shared library = D:\Oracle\ora92\oui\lib\win32\oraInstaller.dll
    Path to Java = "D:\oracle\ora92\jdk\jre\bin\java.exe"
    Location of oracle Inventory Pointer = N/A
    Location of Oracle Universal Installer components = D:\Oracle\ora92\oui
    Require Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
    The filename, directory name, or volume label syntax is incorrect.
    D:\oracle\ora92\opatch\opatch.pl version 1.0.0.48
    Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved
    Error in executing Java program to check conflict
    Error: Opatch failed during pre-reqs check.

  • Gui Buttons don't press when upgrading from 1.1.8 to 1.4.0

    We are upgrading an application from 1.1.8 to 1.4.0 and the Gui button's do not work. I believe it is due to some sort of focus problem (and parent windows) but cannot get it to break in a simple test application. Just wondering if anyone else has had gui problems when upgrading to 1.4.0. If I recompile back to 1.1.8 it works great.
    Thanks.

    wow that's odd...almost sounds like you have a transparent window that is over the buttons so it intercepts the mouse events. Would have to see some code but it really sounds like it's the code and not the jvm....if it were, I would think alot of people would be screaming.

  • Error ORA-03113 when upgrading from 11.2.0.1 to 11.2.0.3

    I keep on getting this error when upgrading from 11.2.0.1 to 11.2.0.3
    [Thread-57] [ 2012-04-20 13:18:28.207 CEST ] [SummarizableStep.genSummary:409]  Generating Summary for:=Pre Upgrade ,status is:=Successful
    [Thread-57] [ 2012-04-20 13:18:28.208 CEST ] [SummarizableStep.genSummary:409]  Generating Summary for:=Oracle Server ,status is:=Failed
    oracle.sysman.assistants.util.step.StepExecutionException: ORA-03113: end-of-file on communication channel
    Upgrade failed due to running the step "Upgrading Oracle Server"
            at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeSubStepImpl(SubComponent.java:738)
            at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeStepImpl(SubComponent.java:585)
            at oracle.sysman.assistants.dbma.backend.component.Component.executeStepImpl(Component.java:317)
            at oracle.sysman.assistants.dbma.backend.SummarizableStep.executeImpl(SummarizableStep.java:183)
            at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
            at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
            at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2708)
            at java.lang.Thread.run(Thread.java:637)
    [Thread-57] [ 2012-04-20 13:18:28.209 CEST ] [SummarizableStep.executeImpl:212]  Throwing exception e from SummarizableStep
    [Thread-57] [ 2012-04-20 13:18:28.209 CEST ] [BasicStep.configureSettings:304]  messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@4805e9f1
    oracle.sysman.assistants.util.step.StepExecutionException: ORA-03113: end-of-file on communication channel
    Upgrade failed due to running the step "Upgrading Oracle Server"
            at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeSubStepImpl(SubComponent.java:738)
            at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeStepImpl(SubComponent.java:585)
            at oracle.sysman.assistants.dbma.backend.component.Component.executeStepImpl(Component.java:317)
            at oracle.sysman.assistants.dbma.backend.SummarizableStep.executeImpl(SummarizableStep.java:183)
            at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
            at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
            at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2708)
            at java.lang.Thread.run(Thread.java:637)
    [Thread-57] [ 2012-04-20 13:18:31.000 CEST ] [CompManager.isModeSet:9822]   DB Upgrade Mode Setting := 1
    [Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [CompManager.isModeSet:9823]   Mode := 1 is set
    [Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [SQLEngine.done:2189]  Done called
    [Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [Database.getStepSQLInterface:787]  OH in database: /app/oracle/product/11.2.0.3/db_1Any clues about what could be wrong? I am planning to upgrade with the manual steps if it does not work :(

    Pl post OS details - are you using DBUA to upgrade ? Are there any errors in the database alert log ?
    ORA-00600 [kodpunp-nulltds], ORA-00600 [kokeeiix1], [600] When Upgrading To 11GR2 [ID 1367827.1]     
    HTH
    Srini

Maybe you are looking for