Advise GNOME 3.4 theme with unified look for GKT3/GTK2
For older versions of GNOME 3.x I used Aldabra, and I was reasonably satisfied with this theme. But in GNOME 3.4 it's broken, GTK2 apps look like crap.
So, I've been wondering if there's any other theme that looks close to Aldabra/Adwaita and has a consistent look across GTK3 and GTK2 (which is really important for the obsessive perfectionist inside of me).
Any recommendations?
I don't know if this is of any help, but I'm running XFCE now and a set of themes that looks nice for both toolkits are Zukitwo. I'd say you give them a try.
Similar Messages
-
Sr. Test Engineer with CLD Looking for Employment in Bowling Green KY/Nashville TN
I am a Sr. Test Engineer in Bowling Green KY looking for employment. I am a Certified LabVIEW developer, one of the few in KY/TN.
For more information, please see my attached resume.
I am not looking to relocate at this time.
Thanks,
Marcus
Attachments:
Marcus Anderson Public Resume.pdf 76 KBHI i have relevent experince in Labview PFA its my updated resume.forther details contact me at 8522950759
Attachments:
4751386.doc 41 KB
4751386.doc 41 KB -
S1 Yoga with ghosting - Looking for a replacement screen that doesn't ghost
I've had this system for around three weeks now and I can say that, while not terribly bothersome, the ghosting issue is definitely present and always makes me a bit concerned when using the device for long periods as I've heard some things about the retention growing worse over time. With that considered, I've two questions. The foremost is to what degree does the image retention grow worse over time, and how severe is it likely to become on a system that is used 6 or 7 days every week and anwhere from 2-5 hours each of those days? Secondly, I've heard that newer systems are shipping with screens that do not display any sort of retention problem and that service centers have such screens available. Would it be possible to obtain a replacement screen, which doesn't experience the retention issue, that I could simply swap myself? I would prefer not to have to send my laptop to a service center because I have a very regular need for it and couldn't spare it for more than a few days during the upcoming holidays. I have quite a considerable amount of experience working with such devices and making FRU swaps, and am confident that I could make the swap (assuming that the process isn't too particularly difficult), especially with reference materials to guide myself. Any feedback or information is appreciated. Thank you for your time.
What is the total weight of the page?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Mike" <[email protected]> wrote in message
news:g919hl$56g$[email protected]..
> After looking at all my options, I ended up opting for
Micha's recommended
> 2-images-in-1 technique to swap images on hover (at
least for now, as a
> test run).
>
> Naturally, since all these thumbs are PNGs, and the
information has just
> doubled in size, the load time of the page is going to
be affected, if
> only by milliseconds on high connections. This isn't as
big a deal as it
> could be, because the page is very specialized, will not
get much traffic,
> and is targetted at web professionals who are all at
high to very high
> speeds.
>
> All that being said, I might feel a bit better with a
loading screen. I
> don't even know if that can be done reliably (I don't
want the screen to
> 'guess' how much more loading there is to do, or put a
static pause in
> there... I only want to do it if it's reliably
accurate).
>
> A single loading screen for the entire page, naturally
(not per image).
>
> Anyone know where I can find such a script?
> -
I put pictures on my iphone when i first got it and i can not see them when i look for them now
I need to get ride of photos that are on my phone but I can not find them when the phone is hooked up. How can I find them?
If you go to the Photos app, is there content in the Photo Library? These would be pictures that are synced to the phone from the computer. Photos in the camera roll are those that you take with the phone, or save from email, MMS on the phone. What type of pictures are you trying to get rid of? If you are trying to get rid of the synced photos, you need to connect to iTunes, select the iPhone in the device pane, then go to the Photo tab in iTunes and remove the check mark by sync.
-
Problem with MonitorStart looking for specific CORRELATION
The help file for OO40 uder the topic "Monitoring Messages" says that "Messages can be monitored based on consumer name, message Id, or correlation".
How do I monitor based on correlation? I tried fiddling with the aqmsg.correlate property along with the monitorstart method but to no avail.
Filtering based on consumer name is a snap but does anyone know how to listen for messages based on the correlation? Thank you.I had a complete AQ sample (including correlation) in the "Oracle and Visual Basic Developers Handbook" chapter 12, but I am not sure if you can still get a copy...
Email me and I'll attach a ZIP with the code I used in that sample. -
Problem with executable: looking for an unkown saved instance
hello !
i'm working on labview 7.0
I have made a program and i always make and use the executable without any trouble. i have made some change (i have remove a page in a tab), and know the executable is always asking for "instance 3117 saved nameofthetoplevelvi.vi"... and obviously doesn't want to work anymore!? The point is that when i use the top level vi (not the EXE) it works well! is anybody knows what's wrong and how to solve that issue?
Thanks in advanceTools => Advanced => Mass Compile
Try it first on the individual file. I you change versions of LabVIEW it will bring your VI's up to the latest version. Like if you go 7.0 to 7.1 you want to Mass Compile all of your VI's to bring them up to the latest version otherwise it will have to do this every time you load an older file. It is a good idea to ZIP of Source Control your files before running Mass Compile.
Matt
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison -
I block pop ups except for allowed sites, but on the allowed sites, the pop up windows don't appear unless I use Exposé, then when I click on the one in Exposé, it just returns to the open Firefox browser.
Hi Tracy,
I don't suspect Malware yet, Id guess Disk corruption or failing Hard Drive with Files not found.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward. -
Hello
If i pass a lot of include paths to cl.exe that comes with Visual Studio 2010, and i also pass /Zi, cl.exe crashes (16.00.40219.01). Here's an attachment to reproduce the issue: http://www.filedropper.com/clexecrash
Extract the folder to your system drive root (C:\), and paste the contents of command.txt into a cmd.exe instance. cl.exe will crash.
test.cmd is a command file containing the line "/IREALLY_LONG_BOGUS_INCLUDE_PATH" 683 times, and /Zi. Please note, that if you either remove even one line of "/IREALLY_LONG_BOGUS_INCLUDE_PATH" or /Zi, the issue goes away. Without /Zi, there
seems to be no limitation of include paths. Please also note, that it's not the sheer number of /I switches that causes this crash, if you replace REALLY_LONG_BOGUS_INCLUDE_PATH with something longer, you can crash cl.exe with less /I switches.
This issue is also present in Visual Studio 2012 (17.00.61030), but seems to be fixed in 2015 CTP 5 (i don't have access to Visual Studio 2013, so i can't try). I know Visual Studio 2010 is not supported anymore, so does anyone know a workaround for this problem?
Thanks in advance,
PeterI cannot reproduce this issue with VS2013, your sample works well and generate a pdb file.
It seems a issue in VS 2012, but sorry about that I have no workaround for this. Please check this thread: this issue only appear in debug mode.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/018ef85a-f172-4278-8215-30ad2a8accc2/clexe-crashes-using-large-number-of-include-directories?forum=vcgeneral
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I am having trouble connecting to my wireless internet and am getting the message that my network configuration settings have changed. I have reported it to my provider who advised that they think the Mac is looking for a fixed IP address and they use dynamic addresses. I have had the Mac for months and have not had this problem before. I would appreciate any help please on how to fix this ?
Then I get a separate pop up that says: Secure Connection Failed. aus3.mozilla:443 uses an invalid security certificate.
The certificate is only valid for the following names: securelogin.arubanetworks.com, www.securelogin.arubanetworks.com
(Error code: ssl_error_cert_domain)
This could be a problem with the server's configuration or it could be someone trying to impersonate the server.
If you have connected to this server successfully in the past the error may be temporary and you can try again later.
I have tried many many times! -
Setting up two iPod Touches on one account with gift cards for app and in-app purchases
I have multiple devices on one account - 2 iPod classics, one iPhone 3G and two recently acquired iPod Touches for my 8 year old boys. They want to make in-app purchases (for Dragonville). They each have their own gamecenter ID. I want to set up each of them with gift cards for their purchases. Is this possible?
If not, what is the recommended approach to manage all devices in one place while allowing individual devices to have a seperate payment mechanism?
Thanks.I recommend that you
Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure you specify a birthdate that results in being at least 13 years old
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
More details of how:
http://ipadhelp.com/ipad-help-tips-tricks/how-to-get-free-apps-from-the-app-stor e-without-a-credit-card/
Use the new ID on her iPod but only for:
Settings>Messages>Send and Receive
Settings>FaceTime
Settings>GameCenter
and Settings>iCloud if you want her to have separate Contacts Calendar and some other things.
Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases.
To make sure you only sync the media yoo want, configure iTunes syncing so that only checked media is synced to the idevices.
iTunes: Syncing media content to iOS devices and iPod
Also see:
How to use multiple iPods, iPads, or iPhones with one computer -
Looking for LabVIEW subroutine for controlling Perkin Elmer Lambda 900 Spectrometre
I want to control a Perkin Elmer Lambda 900 Spectrometre by LabView for integration into a running LabView program controlling the overall experimental setup.
I have got the documentation with the commands for serial interface control, but I do not succed to use them with LabView.
For this reason, I was wondering if a .vi exists for this instrument.Her the screenshot. The communication protocol of the Lambda 900 is based on the rules of the SCPI protocol.
The different steps corresponds on:
1. initializing the interface
2. switching the serial interface on
3. enabeling the communication interface
4. thry to read the system identification.
The different write actions confirm the wirting of the commands, but the read action has nothing to read and the timeout function is activated and returns the corresponding error message. I checked and their are no bytes to read at the serial interface.
If have checked the physical connection between the computer and the specrometer by using the standard program from Perkin (UVwinlab) which is correctly working.
Attachments:
perkin.jpg 40 KB -
What does Looking For pictures mean in start up?
Can anyone help me? After using my computer this morning (it worked) I came back to it and it was frozen with a "looking for o
Pictures" note in the middle of the screen with a beach ball. Ack! I tried restarting, force quit etc and get the same thing. Now all that will come up is the iMac apple screensaver. when I use the f3 -key I can see that safari is working and updating but if I move the mouse the screen goes blue. What in the worl is going on?Now when in safe mode, try to figure out which settings are causing the bad screensaver.. My guess is that your screensaver in set to an iphoto event which is missing, corrupt,... First try with changing to a standard screensaver. Glad I could help
-
How can I download my TV episodes to my Macbook Pro. I bought them from my iPad2, and I looked for them with the same AppleID on iTunes Store and they wont download to my iTunes.
What country are you in ? Depending upon what country that you are in then you might be able to redownload them on your Mac's iTunes via the Purchased link under Quicklinks on the iTunes store homepage
If you're not in a country where TV programmes can be redownloaded then connect the iPad to your Mac's iTunes and use the File > Devices > Transfer Purchases to copy them over from your iPad -
When i sync my music from com to my Iphone and movie clips I can't play them. It look likes it is in iCloud. Next to the music and movie clips there is a download sign (circle with a dot inside)
You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.
-
[solved] Skype GTK3 theme with Gnome and Adwaita theme
Hello,
Is it possible to have Skype using the Adwaita GTK3 theme on a 64Bit system?
I only get the following error:
Gtk-Message: Failed to load module "canberra-gtk-module"
(skype:8290): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita",
Gtk-Message: Failed to load module "canberra-gtk-module"
Regards
Last edited by orschiro (2012-12-02 10:02:16)I resolved the issue.
1. Install Adwaita-X theme from AUR together with lib32-gtk2. You do not need to install lib32-gtk-engines.
2. Create ~/.gtkrc-2.0 with gtk-theme-name = "Adwaita-X" in it.
3. Add export GTK2_RC_FILES="/etc/gtk-2.0/gtkrc:$HOME/.gtkrc-2.0" to your ~/.xinitrc.
Skype should now use the Adwaita-X gtk2 port on a 64bit system. You do not need to change or set anything in qtconfig.
If you then launch skype you may still receive the following messages:
Gtk-Message: Failed to load module "canberra-gtk-module"
(skype:8290): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita",
The first one just says that you need to install lib32-libcanberra-pulse from multilib repo.
As for the second warning I do not know how to get rid of that since I cannot reproduce why skype still looks for the adwaita theme although Adwaita-X was specified in the gtkrc file.
Regards
Last edited by orschiro (2012-12-02 10:04:17)
Maybe you are looking for
-
Why can I not delete emails in the "Important" folder in Mail?
-
Currently MobileMe galleries are easy to set up, maintain, and offer to others all from within Aperture. While other excellent photo sites like SmugMug are available and have upload capability, the total integration of the MobileMe galleries with Ap
-
hi all I want to see the full comparison between these to catalyst products 3850 vs 3560 I heard there is cisco comparison tool to do that, could you please tell me how !? thanks,
-
Document scanned to preview - how then delete it
Have scanned a document to attach to an email. It ended in Previews but cannot now delete it as it is not wanted. Went to 'help' which said edit then delete, but that option is not available.
-
ITunes Store "featured items" banner not displaying
Just noticed today that when I'm in the iTunes store, the featured items banner that scrolls along the top is not displaying. The links still seem to be active - if I click in the empty space I will go to a page for what i presume would be there if I