Advise required for OS Image Software

Hi Expert people
i need advice
i have SUN x4100 M2 servers and i need image software.
my operating system is Windows 2003 SP2 R2
i try symantic back exec and i successfully can take backup but i can't restore it , because the symantic can't see the server hard desk.
i hope if someone try this before or can advice for diffrent applications.
thanks in advance

hi anil , gyan
i have an requirment in which i have to clear a kff field (Sub Pay Group) whenever i change Location field which a seperate MessageLovInput on the same page.
Please note that i have to make this kff field blank not null , please help me with this as early as possible  

Similar Messages

  • I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?

    I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?.

    I'd wait. What can't you do that you need? You mean you want to buy a new model, then why not wait for an actual new one, not the two year old 5,1, when you need to and have outgrown.
    Yours will run Mountain Lion. yours is 4 yrs old and still supported and has life left.

  • This morning I ask about the requirement to download the adobe Cs6 before i buy the product and the salesperson told me that i met the requirement for that particular software, so my surprise now when i open the file it says an error because my computer d

    this morning I ask to a sales person about the requirement to download the adobe Creative Cs6 before i buy the product and the salesperson told me that my computer met the requirement for that particular software, so my surprise now when i open the file it says an error because my computer doesn't meet this requirement,  my computer is a OS X 10.5.8 and the requirement  is OS X v10.6.8 or v10.7 what can i do?

    The requirements are online. For the Master Collection the requirements on Macs are:
    Mac OS
    Multicore Intel processor with 64-bit support
    Mac OS X v10.6.8 or v10.7
    4GB of RAM (8GB recommended)
    15.5GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash-based storage devices)
    Additional disk space required for disk cache, preview files, and other working files; 10GB recommended
    1280×900 display with 16-bit color and 512MB of VRAM; 1680×1050 display required and second professionally calibrated viewing display recommended for Speedgrade
    OpenGL 2.0-capable system
    DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
    Java™ Runtime Environment 1.6
    Eclipse™ 3.7 Cocoa version (for plug-in installation of Flash Builder); the following distributions are supported: Eclipse IDE for Java EE and Java Developers, Eclipse Classic, Eclipse for PHP Developers
    QuickTime 7.6.6 software required for QuickTime features, multimedia, and HTML5 media playbackOptional: Adobe-certified GPU card for GPU-accelerated performance in Premiere Pro; see the latest list of supported cards
    Optional: Adobe-certified GPU card for GPU-accelerated ray-traced 3D renderer in After Effects; see the latest list of supported cards
    Optional: Tangent CP200 family or Tangent Wave control surface for Speedgrade
    Optional: 7200 RPM or faster hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended) for video products
    Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.* Phone activation is not available.
    You should have been given the correct information. Adobe offers 30-day money back guarantee.
    You can find return information here:
    Return, cancel, or exchange an Adobe order

  • David Powers Lesson10 - 'doesn't meet the requirements for an image'

    Hi,
    I have a  problem to upload image in lesson10. It always show the error message of 'doesn't meet the requirements for an image' even the image size, width and height meet the validation. Below is upload_images.php
    My upload file size is 160K with width 640 pixels and height 480 pixels. Please help. Thank You.
    upload_images.php
    <?php
    $uploader = new Zend_File_Transfer_Adapter_Http();
    $uploader->setDestination($destination);
    $uploader->setOptions(array('ignoreNoFile' => TRUE));
    $files = $uploader->getFileInfo();
    $filenum = 1;
    foreach ($files as $file => $info) {
      $file = "photo{$filenum}";
      $caption = $_POST["caption{$filenum}"];
      if (isset($_POST["place_id{$filenum}"])) {
        $place_id = $_POST["place_id{$filenum}"];
      } else {
        $place_id = NULL;
      $filenum++;
      if ($uploader->isUploaded($file)) {
              $filename = $uploader->getFileName($file, FALSE);
              $uploader->addValidator('Size', FALSE, '500kB');
              $uploader->addValidator('MimeType', FALSE, 'image');
              $uploader->addValidator('ImageSize', FALSE, array('minheight' => 50, 'minwidth' => 100));
              if (!$uploader->isValid($file)) {
                $errors[$filename] = "$filename doesn't meet the requirements for an image";
              } else {
                $no_spaces = str_replace(' ', '_', $filename, $renamed);
                $uploader->addValidator('Extension', FALSE, 'gif, png, jpg');
                $recognized = FALSE;
                if ($uploader->isValid($file)) {
                        $recognized = TRUE;
                } else {
                        $mime = $uploader->getMimeType($file);
                        $acceptable = array('jpg' => 'image/jpeg' ,
                                                                          'png' => 'image/png',
                                                                          'gif' => 'image/gif');
                        $key = array_search($mime, $acceptable);
                        if (!$key) {
                          $errors[$no_spaces] = "$filename is an unrecognized image type";
                        } else {
                          $no_spaces = "$no_spaces.$key";
                          $recognized = TRUE;
                          $renamed = TRUE;
                if ($recognized) {
                        // get the names of existing files
                        $existing = scandir($destination);
                        // check if the name of the uploaded file is in the array
                        if (in_array($no_spaces, $existing)) {
                          // get the position of the final period
                          // use it to get the base name and extension
                          $dot = strrpos($no_spaces, '.');
                          $base = substr($no_spaces, 0, $dot);
                          $extension = substr($no_spaces, $dot);
                          // initialize a counter
                          $i = 1;
                          // use a loop to add the counter after the base name
                          // check whether the new name exists in the array
                          do {
                                  $no_spaces = $base . '_' . $i++ . $extension;
                          }  while (in_array($no_spaces, $existing));
                          // set $renamed to TRUE
                          $renamed = TRUE;
                        $uploader->clearValidators();
                        $uploader->addFilter('Rename', array('target' => $no_spaces, $info['tmp_name']));
                        $success = $uploader->receive($file);
                        if (!$success) {
                          $errors[$no_spaces] = implode('. ', $uploader->getMessages());
                        } else {
                          $uploaded = "$filename uploaded successfully";
                          if ($renamed) {
                                  $uploaded .= " and renamed $no_spaces";
                          $images[] = array('filename' => $no_spaces,
                        'caption'  => $caption,
                        'place_id' => $place_id);
                          $messages[] = $uploaded;

    I solved it finally. For your infor, I'm using php version is 5.4.3 and MAMP 2.2. Here are the changes:
    1) Open php.ini
        Look for 'extension=php_fileinfo.dll' and remove ;
    2) Download GNU file package for windows from http://gnuwin32.sourceforge.net/downlinks/file-bin-zip.php.
        Extract the zip file.
    3)  Copy 2 file from the extract folder ../share/file/magic and ../share/file/magic.mgc and paste in folder php/extra/magic
         folder. (Create the magic folder as new folder).
    4) Stop MAMP all services and start services again.
    This will work for you !

  • Is there a website or PDF somewhere which discusses best practices for producing a children's picture book? I am mostly interested in requirements for good image format, resolution, etc.

    Is there a website or PDF somewhere which discusses best practices for producing a children's picture book? I am mostly interested in requirements for good image format, resolution, etc.

    There may be a few links in Apple Support, regarding articles about how to use iBooks Author
    and iBooks Store, etc; these would be separated into two general categories by device used.
    Since there is an iOS and an OS X version of each, you may have to look to see what Apple
    Support says about the one you are interested in; and how far their database goes toward an
    answer to your question. Otherwise, a general search engine approach may be necessary.
    Not sure if anything along the lines of what you seek would be available in an App.
    References to iBooks Author and iBooks Store, etc appear within these two categories in Support:
    For Mac OS X:
    http://www.apple.com/support/mac-apps/
    For iOS:
    http://www.apple.com/support/ios/
    Appears a community host moved your earlier post into one of the iBooks Author or Store sections
    after I'd replied to what otherwise may be a similar post. Not sure if the links to the Discussions area
    of iBooks you are interested in, have similar questions or answers by others who'd visited previously.
    Is there a website or PDF somewhere which discusses best practices for producing a children's picture book? I am mostly interested in requirements for good image format, resolution, etc.
    In my reply to your earlier thread, prior to it being moved, those links to sections of iBooks Author, etc
    are posted. You can also find them from the main Apple Support Communities page.
    Sorry to not be of much help in this matter.
    Good luck & happy computing!

  • Help! Urgent help required for adjusting image

    Hi - hoping someone can help.
    I sent the attached PDF -  http://www.sensecreative.co.uk/custUploads/SENSE-36-7977-95928/77317/SENSE-36-7977-95928-7 7317-2440.zip - to print with Sense Creative. The cards were printed and they've turned out quite visibly green on the reverse (where it should be white).
    I've printed the artwork on several printers I have access to and it looks as it should, however SC are saying that the issue is with the artwork
    "The green tinge you see on the reverse of these cards is prevalent in the artwork. The makeup of the background is approximately c-15 m-11 y-15 k-0. the predominant levels of the yellow and cyan will give you the green tint. Upping the levels of the artwork in or substituting the cyan, magenta and yellow levels with more black in Photoshop will likely give you the result you require. We are satisfied that in both instances, the artwork has printed correctly and the colours are well within tolerance given the nature of the artwork."
    So, I'm in a bit of a pickle as the cards are needed for an event next week.
    How do I change the image levels? Or are they talking nonsense and trying to pass the buck?
    Help!

    station_two,
    Acrobat View> Tools> Print Production> Output Preview: Object Inspector will call out the objects' profiles if you click on each one individually (in this case all appeaar to be "Device CMYK" or Untagged CMYK)
    untagged CMYK has the same pitfalls as untagged RGB... if one applys or assumes the wrong SOURCE PROFILE it doesn't CONVERT colors to Monitor RGB or Print Space correctly

  • Registration key required for database 10g software

    receive a password and message "Thank you for registering", but never get the key necessary to install software on disk that came with textbook--very frustrating

    You can download and install Oracle Database 10g free (for personal/development use) from OTN, with no registration key required:
    http://www.oracle.com/technology/software/products/database/oracle10g/index.html
    (I recommend Express Edition)
    Cheers, OTN

  • Requirements for Photo Creations software.

    If I have a Dell Printer and Computer, can I still download and use the HP photo creations software?
    This question was solved.
    View Solution.

    Hi JRhonda.
    Very likely. HP Photo Creations runs on Windows 7, Vista, and XP (as well as Mac OS 10.5 and above). You can print your creations in three ways:
    On a home printer (photo printer recommended), 
    For pickup at a participating store, or
    Shipped to you.
    Here are the complete requirements:
    Microsoft Windows XP, Vista, or Windows 7
    1 Ghz Pentium 4 processor 
    256 MB RAM
    15 MB of free hard disk space
    Broadband Internet connection
    Macintosh OS X v10.5 (Leopard) or higher
    Intel processor
    1 GB RAM
    15 MB of free hard disk space
    Broadband Internet connection
    Please let us know how it goes,
    RocketLife
    RocketLife, developer of HP Photo Creations
    » Visit the HP Photo Creations Facebook page — news, tips, and inspiration
    » See the HP Photo Creations video tours — cool tips in under 2 minutes
    » Contact Customer Support — get answers from the experts

  • I use Netfirm's CM4all. Since installing Google Chrome required for a needed software CM4all's edit page won't finish loading.

    I only use Chrome for CashierLive. I use Firefox for everything else. Todate I have cleared the cache & cookies, did an exception for Netfirms in pop up blocker, did a virus scan, uninstalled Firefox ans reinstalled it. Nothing works. I get the spinning wheel and states at bottom: waiting for dwww_objectify_ca.d.chango.com

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Advise required for the scenario logic

    Hi Experts,
    SCENARIO NAME: FILE(text format) to IDOC.
    requirement.
    ex. input is 10 line items if any of the line item fails that supposed to throw exception what ever success lines are there that should process with out any fail or idoc should generated.
    there no multi mapping. only one structure.
    thanks

    Hey,
    You need to use 1:N MultiMapping here. In PI, each message is a single unit of work, either the complete message fails or passes.
    For your case, you need to generate an IDOC for each Line item. This way, if one message fails(read line Item), other messages (read line Items) won't be affected.
    As far as alerts are concerned, you can simply configure alerts using ALRTCATDEF or CCMS. That will take care of sending e-mail in case of failure.
    Below is the Blog to do Multimapping and generate Multiple receive structures from a single source structure. Please note that the Blog is old and you don't need to use BPM for it:
    Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure
    Thanks
    Aamir

  • Sign In Required for Cloud based software

    I'm a cloud subscriber for all my creative software (Id, Ps, Ai, Mu, Eg, Br) and I'm being prompted to register my products upon opening and provide a serial number. Shouldn't my products already be registered? How can I fix this problem?

    Hi Cameron,
       Probably the Adobe Application Manager is not updated. Please install the latest version of AAM from the below link:
    http://www.adobe.com/applicationmanagerpatch/index.html
    Once you update, please launch the software and select "License this software" and enter your Adobe ID and password which is used to place the Order and click next. By this the Subscription should activate and shouldn't as for a serial number.
    Regards,
    Jairaj

  • License requirements for updating WLC software

    Hi all,
    I've WLC 4404 running 4.1.171.0 and want to know if i can upgrade it to the latest version of the OS for free?
    Do i need an active smartnet subscription? Can you upgrade for free? Can you buy and upgrade? In the dark about this.
    Thanks,
    Neil

    Hi Neil,
    There are no "licensing" costs involved with this type of WLC Upgrade. If you have access to the Software download Centre you are good to go :)
    Hope this helps!
    Rob

  • Turn Notifications off in Safari (required for updating Adobe software), Turn Notifications off in Safari (required for updating Adobe software)

    need to turn Notifications off in Safari to update Adobe Software

    From your Safari menu bar click Safari > Preferences then select the Notifications tab.
    Deselect:   Allow website to ask for permission to send push notifications   (at the bottom of that pane).

  • "The software required for communicating with the iPod is not installed..."

    I realize my explanation of my problem is long-winded, so if you want a shortened version, here it is:
    I've followed all the instructions trying nearly everything, and no matter what I do, iTunes gives me the error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software." My G5 iPod (60GB) works on two other computers (both without any music on them), so I assume there something wrong with my computer and not the iPod itself.
    Now for the long-winded story of the last eight hours of my life...
    I just got the Generation-5 iPod Video (60GB) a today and I'm having problems already. I followed the instructions and installed the iPod software and then plugged in my iPod (iTunes has been on my computer for a while now). I was expecting iTunes to open after plugging in the iPod, but my device manager only detected and installed "a new device". I manually opened iTunes and got an error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software."
    After re-installing the iPod software and iTunes, and restarting my computer countless times, I came looking for help here. I found this page, which seemed to outline my problem exactly. My computer recognizes the iPod as a drive, but iTunes won't have anything to do with it. I have all the symptoms outlined in the heading, so I hoped to solve my problem there. I followed the instructions step-by-step, and after the final restart, I open iTunes to get the same exact error message.
    I decided to determine whether there was a problem with my iPod or if it was my computer. I plugged my iPod into my uncles's powerbook, and got to the point where I can name and configure my iPod. I expected it to work flawlessly on a Mac (which it did) but there is no way for me to continue using a Mac (after tomorrow) for my iPod. This formatted the iPod for a Mac, so I went to another (different from the original) Windows computer, clean of any iTunes and iPod software, and followed the instructions exactly as they're supposed to be followed. After the installations, I plugged in my iPod, and although iTunes didn't open, I was able to format back to Windows and name my iPod (a step in the right direction). I should note that my (anti-iPod) computer is a Windows XP Pro, and the working one is Windows XP Home Edition. This was all well and good, until I remembered there was no music on this computer. So my iPod is completely working there, but there isn't anything I can do with it.
    Next, I came back here and browsed around the discussion boards, hoping to find somebody with a similar problem to mine. There seems to be alot of errors concerning iTunes not recognizing the iPod, but none of the solutions I tried worked for me, including changing the drive letter. I get the "iPod Service Error" while trying to restore to factory settings through iPod updater.
    Of course, I could transfer all 32GB of music from one computer to another, but the second (working) computer isn't mine and I won't have access to it in a couple months. It would be most convenient if I could get my iPod working on my own computer. Any help would be appreciated, especially from somebody who has solved this problem or know how to solve this problem.
    P.S.
    Here are some other minor details that my be important, but I didn't feel they were worth including.
    - My brother has his iPod mini set up on my computer, under a different user login. He gets the same error once in a while, but re-installing iTunes always solves the problem for him. I had him try solving my problem his way, but nothing worked for him either.
    - My computer is an AMD Athlon 64 Processor 3200+, 512MB RAM with Windows XP Pro SP2 installed. My internal hard drive is partitioned, using the letters C, D and H (C being my system files, D used for recovery files and H for my applications and games). My E drive is used as a DVD/CD-ROM Drive, and drives F and G are reserved for virtual drives (none have been running during this entire ordeal). My external hard drive uses the letter I, and I manually set my iPod to use the letter J (I've never used 'J' for anything else before).
    - Yes, I have downloaded and installed the latest versions of iTunes and the iPod software.
    - I'm assuming there is a problem with my computer and not my iPod, since it worked on both other computers I tried. I'm hoping it's as simple as changing a registry file or cleaning out (yet another) temp directory.

    Solution to "Software required for communicating with the iPod is not installed"!
    I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
    The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
    Here is what worked.
    1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
    2. Log in as an Administrator
    3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
    3.1 Go to Start menu --> Run.
    3.2 Type in "regedit".
    3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
    There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
    3.4 Right-click on IPodService.IPodManager
    3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
    3.4.2 On the window that launches, click on "Advanced..."
    3.4.3 Click on the "Owner" tab.
    3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
    3.4.5 Hit "OK".
    3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
    3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
    3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
    3.4.8 Hit "OK".
    3.5 Repeat procedure for the "iPodManager.1" key.
    3.6 Now right-click and delete both of these keys.
    I think that's all that's required, but I also searched through the registry and deleted the following keys.
    4. Other keys I deleted:
    4.1 HKEYCLASSESROOT --> IPodManager.IPodManagerUI.1
    4.2 HKEYLOCALMACHINE --> SOFTWARE --> Apple Computer Inc. --> iPod
    I think that's all I deleted, but I'm not positive. I seached for instances of "ipod" using the Find... and Find Next functions under the Edit menu.
    5. Exit out of the registry editor.
    6. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
    I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
    Hopefully this helps!
    Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
    Mark

  • SOLUTION to "Software required for communicating with the iPod is not insta

    Folks, I can not take credit for this.....you should send your checks to MarkinMadison. I've included his post in it's entirety. For me, this was the Holy Grail !!
    My only comment is make sure when you are in the registry that you hit the "apply" button to change and add things.
    This probably won't solve everyone's problem but it clearly solved mine (and I tried all other "solutions"), as well as Mark's.
    Apple: please find out who MarkinMadison is and either cut him a big check or offer him free Ipods for life.
    "Solution to "Software required for communicating with the iPod is not installed"!
    I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
    The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
    Here is what worked.
    1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
    2. Log in as an Administrator
    3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
    3.1 Go to Start menu --> Run.
    3.2 Type in "regedit".
    3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
    There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
    3.4 Right-click on IPodService.IPodManager
    3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
    3.4.2 On the window that launches, click on "Advanced..."
    3.4.3 Click on the "Owner" tab.
    3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
    3.4.5 Click the checkbox that says: "Replace owner on subcontainers and objects."
    3.4.5 Hit "OK".
    3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
    3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
    3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
    3.4.8 Hit "OK".
    3.5 Repeat procedure for the "iPodManager.1" key.
    3.6 Now right-click and delete both of these keys.
    3.7 If you can't delete, you might need to open up the keys and repeat the procedure on the sub-keys.
    4. Exit out of the registry editor.
    5. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
    I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
    Hopefully this helps!
    Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
    Mark"
    Dimension 4600   Windows XP  

    I have also posted the same question, earlier today. I purchased two for my children and cannot get the iPod to communicate with the computer. I have the iTunes software on my system, but during the installation process I cannot click the NEXT button, once I plug the iPod cable in. The computer does not detect it. I have tried all 6 USB 2.0 ports. I even removed the Dell Jukebox and MusicMatch programs. I am not a computer savvy person - just a mom who wants to give these to my children for Christmas. This is the first "chat" site I have even registered on. I am so very frustrated. Hopefully, this can be resolved.

Maybe you are looking for