Advise required for the scenario logic

Hi Experts,
SCENARIO NAME: FILE(text format) to IDOC.
requirement.
ex. input is 10 line items if any of the line item fails that supposed to throw exception what ever success lines are there that should process with out any fail or idoc should generated.
there no multi mapping. only one structure.
thanks

Hey,
You need to use 1:N MultiMapping here. In PI, each message is a single unit of work, either the complete message fails or passes.
For your case, you need to generate an IDOC for each Line item. This way, if one message fails(read line Item), other messages (read line Items) won't be affected.
As far as alerts are concerned, you can simply configure alerts using ALRTCATDEF or CCMS. That will take care of sending e-mail in case of failure.
Below is the Blog to do Multimapping and generate Multiple receive structures from a single source structure. Please note that the Blog is old and you don't need to use BPM for it:
Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure
Thanks
Aamir

Similar Messages

What are the ports required for the Audio, Video and A/V conferencing when the following end points are enabled for QoS in Lync 2013 server?

Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.

Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

ABAP Routine code for the below logic

Hello BW Experts ,
I need to write a complex ABAP routine in BW .
Following is the detail explaination .
Can anyone tell me the ABAP code for the below logic?
It would be a greate help as I am unable to do this
since last two days.
WBS Elements are maintained at IOS and Warranty levels in R/3 side.
The IOS WBS is a top level of WBS element and below that the Warranty WBS level.
The IOS and Warranty WBS elements can be differentiated by means of priority field.
When priority = i   , WBS Element is known as IOS Level WBS Element and
When priority = Y the WBS element is known as Warranty WBS element.
The Equipment Number is maintained compulsorily at IOS Level WBS elements only.
It is not maintained at Warranty WBS Element.
But the Cost is maintained at Warranty WBS Elements.
In BW I need all Warranty WBS ( priority = Y) along with their cost figures and Equipment Numbers.
But as the Equipment Number is not maintained compulsorily at Warranty WBS level we have asked to
Copy it from IOS WBS ( priority = i ) and assign it to Warranty WBS level ( priority = Y ).
So I have included the Equipment Number in the ODS and in update rules I need to write the routine for it as
per the above logic.
The Equipment Number is coming from Master data of WBS Element.
The WBS element master data we are loading in BW .
Also the same WBS Element transaction data is coming from the transaction data data source in BW.
Following fields / infoobjects and the table names in BW :
1. Equipment Number : /BIC/ZEQUIPMNT and table name /BIC/MZWBS_ELEM.
2. WBS Element       : ZWBS_ELEM is coming from transaction data data source as well as master data.
                                 In ODS update rules it is coming from transaction data data source Comm_structure-ZWBS_ELEM.
                                 Also we are loading separetly the master data for ZWBS_ELEM.
                                 The ZEQUIPMNT is an attribute of ZWBS_ELEM.
3. Priority                : PRIORITY     and table name /BIC/MZWBS_ELEM.
                                  The info object name for Priority is 0Priority but in master data table /BIC/MZWBS_ELEM
                                  the field name is    PRIORITY.
                                 When PRIORITY = ' i ' then    ZWBS_ELEM is at IOS Level
                                 When PRIORITY = ' y ' then ZWBS_ELEM is at Warranty Level.
4. ODS name : /BIC/AZCOST00 and same is table name active data table .
So please tell me the routine Code .
Best Regards ,
Amol.

Hi Dinaker,
Did you find any solution for this issue. I too have a similar requirement of pulling all the service orders for a specific Purchase Order in the BW report.
Thanks,
SAPBWI

SFLIGHT is NOT defined for the current logical database.

I have just started learning ABAP and bought an ABAP Objects book by Horst Keller. I have installed 4.6d mini sap and SAP GUI 6.4 on win XP Prof. I executed S_FLIGHT_MODEL_DATA_GENERATOR to load DB tables.
(1). When I tried to check a sample program, I get an error message SFLIGHT is not defined for the current logical database.
Here is the partial code:
REPORT zbcb01f1 .
TABLES: sflight, sbook.
DATA: BEGIN OF sr OCCURS 100,
      carrid LIKE sbook-carrid,
      connid LIKE sbook-connid,
      fldate LIKE sbook-fldate,
      bookid LIKE sbook-bookid,
      order_date LIKE sbook-order_date,
      loccuram LIKE sbook-loccuram,
      END OF sr.
GET sflight.   <---- Error is pointed here
(2). I am also not getting Graphical Screen Painter when selecting Layout for a screen. Instead, I am getting alphanumeric editor.
Someone please help me.
Raizak.

Hi Raizak,
the easiest way is to go to service.sap.com/notes and enter the note number. For this time I've copied the 2 notes below.
Best regards,
Christian
Symptom
The Graphical Layout Editor of the Screen Painter either does not start or terminates.Error message 37527 is displayed in the session in which the call was made (Graphical Layout Editor not available.
Additional key words
() EUNOTE, EUSCREENPAINTER, 37 527
Cause and prerequisites
This note comprises all the common causes for error message 37527 and provides you with information on how to systematically trouble shoot the problem.
1. Windows32 or UNIX/motif?
As of Release 4.6B there is only the program version for 32bit Windows (NT, 95, 98, 2000 ff.).Up to Release 4.6A there was also a version for UNIX/Motif.All of the more current notes (with the exception of Note 45490) refer only to the Windows version.
2. Termination at the start or during use?
The following diagnostic steps refer to the causes of the errors which prevent the Graphical Layout Editor from starting. However, there are also known error causes, which result in the program terminating when the application is being used and which also produce the 37527 error message. This affects -
Rel.4.6C/D: Termination when attempting to read texts in the logon language -> Note 375494
Crash after transferring program and dictionary fields. Termination after transferring program and dictionary fields -> Note 189245
Release 3.1I: Termination after inputting field text -> Note 113318
3. Is the SAPGUI installation correct?
The Graphical Layout Editor is automatically installed during the standard installation of the SAPGUI.If you chose a non-standard installation, then you should have explicitely selected its installation (component "Development Tools - Graphical Screen Painter").
The program executable is called gneux.exe.During the SAPGUI installation it is placed in the same directory as the SAPGUI programms (for example, front.exe) (usually C:\Program Files\SAPpc\sapgui). The following belong to the program:
- An additonal executable gnetx.exe (RFC starter program)
- the DLL eumfcdll.dll
- various eusp* data files (that is, the names all begin with eusp.)
You can check the completeness of the program installation by starting the program gneux.exe locally in the SAPGUI directory (for example, by double-clicking on the program name in the Explorer window).The Layout Editor is displayed with German texts and an empty drawing area for the pseudo screen EUSPDYND 0000.
If the installation is not complete, an error dialog box provides information regarding the cause of the error, for example, sometimes the DLL eumfcdll.dll is missing after reinstalling the SAPGUI. For example, the eumfcdll.dll DLL was sometimes missing after the SAPGUI was reinstalled.
4. System link defined and okay?
The Graphical Layout Editor is a separate program which is started by the Screen Painter Transaction (SE51) on the Frontend machine.
Up to Release 3.0F, the programs communicated with each other via the graphics log of the SAPGUIs (gmux).The definition of the environment variable SAPGRAPH may be the cause for the program not being being found where it is.
As of Release 3.1 G, the programs use a separate RFC link which is set up in addition to the SAPGUI's RFC link.Missing or incorrect definitions of the RFC destination EU_SCRP_WN32 or problems with the creation of the RFC link are the most frequent causes for error message 37527 being displayed.Below you can find the correct settings for the RFC destination EU_SCRP_WN32 (under "Solution").Note 101971 lists all the possible causes for problems with the RFC link set-up. Attention:The Graphical Layout Editor may not be operated through a firewall (for example between the SAP and the customer system) because this does not allow an additional RFC connection in addition to the SAPGUI.
Solution
ad 1 UNIX/Motif
Note 45490 describes possible errors resulting from an incorrect program installation under UNIX/Motif (up to Release 4.6A).
ad 2 Termination when using
The above-mentioned notes may contain options for solving individual problems.However, you usually have to replace the program with an corrected version.You can do this either by downloading a patch from sapservX or by installing a more current SAPGUI.The patch is mentioned in the respective note.
ad 3 Installation
You either need to reinstall the SAPGUI or manually copy the missing file into the SAPGUI directory.In both cases you should make sure beforehand that a Graphical Layout Editor is no longer running.To do this you can either remove all processes gneux.exe from the process list by using a tool such as Task Manager (on WindowsNT) or exit the Graphical Layout Editor from the Screen Painter Transaction menu via Edit -> Cancel Graphical Screen Painter). Attention:For each session or system an individial Layout Editor process may exist so that, if need be, several processes should be cancelled.
ad 4 System link
Up to Release 3.0F:you can either delete the environment variable SAPGRAPH or copy all the files of the Graphical Layout Editor into the directory which is specified by SAPGRAPH.
As of Release 3.1G:you can use Transaction SM59 to check the RFC destination EU_SCRP_WN32 (expand the TCP/IP connections, select destination EU_SCRP_WN32).If the destination is missing, then you should create it with the following settings:
- Connection type "T" (start of an external program via ...)
- Activation type "Start"
- Start on "Front-end workstation"
- Front-end workstation program "gnetx.exe" (caution! NOT gneux.exe)
- Description (optional) "Graph. Screen Painter (Windows32)
Start Program gneux.exe using the gnetx.exe starter program."
If you want to start the program from a different directory than the SAPGUI standard directory, then replace the default value under Frontend work station by the complete path name for program gnetx.exe.Transaction SM59 also allows you to check the RFC connection via the pushbutton "Test connection").In this case the system attempts to localize and start the program gnetx.exe.If there are errors, a message is displayed regarding the possible causes (for example, gateway problem, timeout problem or the like).Note 101971 provides a detailed explanation of the problems involved with an RFC connection set-up.As the Graphical Screen Painter requires a functional RFC connection as of Release 3.1G, contact the System Administrator or create an message on the topic Middleware (BC-MID-RFC) if you encounter RFC problems.
If the program gnetx.exe can be found and started, the banner dialog box with logo, release data and version number is displayed briefly.As the Layout Editor itself is not started, the error cause must be in the installation of the Layout Editor program gneux.exe if the connection test was successful.
Release 4.5A to 4.6B: Use with Releases <3.1G>.
The Graphical Layout Editor is downward-compatible as regards the system connection, that is, an RFC-based Layout Editor for example from Release 4.6C can also be used on a non-RFC-based Screen Painter, for example of Release 3.0F.However, the releases mentioned above have a program error which causes a crash due to memory violation in the start phase of the program.Note 197328 describes the solution by installation of the corrected program version.
Important: Trace file dev_euspNNN!
If none of the diagnosis steps leads to the cause of the error and to the solution of the problem via the corresponding note, then you should add the contents of the trace files dev_euspNNN (NNN = process number) to the message for SAP, if possible.You can find this file in the current directory of the SAP System, for example under Windows NT in C:\Winnt\Profiles\<user>\SAPworkdir.If several such trace files can be found there, make sure that you use the file which matches the termination time with respect to date and time of creation.In most cases the ERROR message in the last lines of this trace file provides an important note on the cause of the error.
Source code corrections
Symptom
The graphic layout editor of the Screen Painter cannot be started (RFC version).
Other terms
() EUNOTE, EUSCREENPAINTER
Reason and Prerequisites
This is generally caused by the fact that the RFC connection between the frontend graphics layout editor and the calling screen painter program at the backend cannot be set up.
Possibility 1: Route permission denied
In the trace file dev_eusp<Process Id> of the graphics layout editor you find the entry "ERROR in RFCMgr_accept: not accepted", and in the RFC trace file dev_rfc.trc you have an entry of the form "ERROR route permission denied (<Front-Id> to <BackId>,<Service>)".
If there is a firewall between frontend computer and application
server, you need to decide whether the port for the RFC of the graphical layout editor can be released here (see Solution 1 below).
In case no firewall exists between the frontend computer and the application server, in its route permission table, the SAProuter contains either no entry for the frontend computer, on which the graphics layout editor is started, or the entry says that the link is saved by a password.Since the connection is denied, the graphics editor processes exits again, and the screen painter switches to the alphanumeric layout editor.
Possibility 2: Service 'sapgw<ServiceId>' unknown
In the trace file dev_eusp<ProzessId> of the graphics layout editor you have the entry "ERROR in RFCMgr_accept: not accepted", and in the RFC trace file dev_rfc.trc you have an entry of the form "ERROR service 'sapgw<ServiceId>' unknown".
The service sapgw<ServiceId> (for example, sapgw00) is not known on one of the computers participating in the RFC communication because the corresponding entry is missing in its service file. The affected computer can be the frontend computer or the gateway computer.
Possibility 3: The system parameter gw/cpic_timeout value is too low
This system parameter determines how many seconds the gateway is waiting for the RFC connection to be set up.In case of a high network load, the default value of 20 seconds is too small with the result that the connection cannot be created on time.Here the graphics layout editor process also exits with the trace file entry "ERROR in RFCMgr_accept: not accepted".
Possibility 4: System parameter abap/no_sapgui_rfc set
The profile parameter abap/no_sapgui_rfc of the system is set (that is, it has a value not equal to space or 0).This prevents the program of the graphics layout editor from being started with RFC at the frontend.
Possibility 5: Unnecessary authorization check
The error message "No RFC authorization for user xxxxxx" is generated although the check of the RFC authorization was deactivated by profile parameter auth/rfc_authority_check (value = space or 0). The problem is caused by a program error, that ignores the value of the profile parameter let during the call of the RFC authorization check (see Note 93254). This error can occur as of Release 4.5.
Solution
ad 1) If a Firewall is installed between frontend computer and the application server, you need to decide whether the port for the RFC link of the graphical layout editor shall be released in the firewall. This is port 33nn, where nn is the 2-digit system number of the SAP application server. As of Release 3.1G, the graphical layout editor needs an RFC link for communication with the application server in addition to the already existing linkof the SAP GUIs. Such a second link is not allowed by the firewall in general because it would contradict the security concept (password protection, logging of the connection).
If no firewall exists, you should check whether the frontend computer can be added to the route permission table or whether the password option can be removed from out of the available entry.
For details refer to chapter 4.4 of the attached Note 30289.
ad 2) Include service sapgw<ServiceId> in the service file.
Refer to Note 52959 for details.
ad 3) Increase value for system parameter gw/cpic_timeout. 60 seconds should be sufficent as a timeout limit.
ad 4) Set the system parameter abap/no_sapgui_rfc to space or 0
Start the application server so that the new parameter value comes into effect.
ad 5) Import the Support Package specified in the attachment for the release in question or implement the advance correction in the source code as described in the attached correction instructions.
As a workaround, assign RFC authorizations as described in Note 93254.

Mac Pro configuration for the best Logic Pro 8 performance

Hello,
I noticed that sometimes I have little delays playing midi keyboard in Logic Pro 8.
What is the hardware configuration of Mac Pro for the best Logic Pro 8 performance?
Do I need to install any sound card or any additional software?
My hardware overview is:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 3 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 1 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version: 1.7f10
thank you,
Vlad

You should definiteley get some more RAM first. Buy another 3 Gigabytes to make it 4 Gigs. The Lateny you're experiencing is due to the Buffer settings within Logic. If you set that to 64 or 128 samples (in the Audio preferences->devices->Buffer) the Latency will improve but it will also reduce the number of Plug Ins you can use at the same time as lower Buffer settings require more CPU.
You didn't mention an Audio Interface which you should obtain if you want to record live Instruments. For the start you can do everything in the Box but the analog minijack Ins/Outs built in your Mac are not really state of the art and you'll improve the sound by getting a good Firewire Interface.
Also get a second/third HD as you should not be recording onto your system drive. It's good to have one drive dedicated for recording Audio and another one for samples/Jam Packs/Loops.

Is a currency dimension required for the Allocation engine to work?

Hello All,
Currently working on an application with no currency dimension, and I can't get the allocation script to work. Just wondering if the allocation engine will work without a currency dimension.
Thanks,
Hutch
Edited by: hutchinsm on Jul 29, 2011 4:24 PM

Just found my mistake in my allocation logic. It works now, so the answer is No, the currency dimension is not required for the allocation engine to work.

On installation of Firefox 4 beta, it tells me that it won't run on my Mac. When I go to system requirements, it takes me to a page for Firefox3.6 requirements. Where can I find the requirements for the beta?

The link to system requirements for Firefox 4 beta takes you to a page that gives you the requirements for Firefox 3.6 instead. I assume that the requirements for the beta are different as I can't seem to install the beta on my Macs. Where can I find the beta system requirements?

I never expected Mozilla to neglect the users of Apple's PowerPC (PPC) computers, while still supporting much older operating environments such as Windows XP. So, I should just throw away a $6,000 system, which is still fast and functional, and contribute masses of heavy metals to land-fills because…?
I'm hurt and confused after supporting Firefox for many years — installing and using it not only on my own computers but on most of my customers' computers. Now I have to tell my customers with PPC Macs they can't have a secure cross-platform browsing experience from Mozilla. They'll have to learn to use some other browser, or buy a new computer.
If one doesn't buy a new computer every year, one doesn't deserve Firefox 4. This is sort of sounding more like a Microsoft™© doctrine. (But wait, I can still have Firefox 4 on a ''SERIOUSLY CRAPPY WINDBLOWS XP pile of rubbish?!'') Please open your eyes Mozilla. This just doesn't make sense.

Downloaded the latest itunes and when i go to install it i get a message saying there is a problem with this windows installer package a program required for the install to complete could not be run, contact your support personnal or package vendor

When `ve downloaded the latest itunes and then i go to install it i get a message saying there is a problem with this windows installer package a program required for the install to complete could not be run, contact your support personnal or package vendor any ideas anyone ? thanks

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?

I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?.

I'd wait. What can't you do that you need? You mean you want to buy a new model, then why not wait for an actual new one, not the two year old 5,1, when you need to and have outgrown.
Yours will run Mountain Lion. yours is 4 yrs old and still supported and has life left.

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell wh

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell what I do and do not have?

Apple Menu --> About this Mac.
Mylenium

I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ?

I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ? Right now I have a 10.5.8 is there a way to upgrade or something?

Buy the Snow Leopard retail installer (http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA).
That will take you to 10.6.3.
If required you can then use the combo updater to get to the latest version, 10.6.8 (http://support.apple.com/kb/DL1399)
SL system reqmts;

Error - The software required for the ipod is not installed correctly. Please reinstall itunes to install the required sotware

When trying to load music from ITunes to my ipod I receive the error "The software required for the ipod is not installed correctly. Please reinstall itunes to install the required sotware"
What should I do to correct the error?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies. The notes below the box include tips on removing troublesome components.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
tt2

Requirements for the Interactive Graph -- Process Monitoring in WLI

Hi,
In my WLI console I m not able to bring the Graphical View for the Process Monitoring. My server is running on HP-UX -11, however I am able to view the graph from the workshop (windows desktop). Is there any server side requirement for the Graphical view?

You have to run xvfb (X Window virtual frame buffer) on the HP-UX box. You have to download that from HP's website. Run it using root user only. Set the DISPLAY of your admin server to the xvfb and then you will be able to see the graphical view.

"PERNR" is not defined for the current logical database.

Hi Experts,
I have developed a program for HR salary variance but when i execute i getting error in the line " get PERNR"
the "PERNR" is not defined for the current logical database. so plz suggest me to avoid this issue.
Thanks,
Rajesh

the codes are has below,
*& Report ZHRSAL_COMP
REPORT ZHRSAL_COMP.
tables: pernr,
        t512t.                      "Wage type texts
infotypes: 0001. "Organizational Assignment
*Tables data containing directory to PCL2 payroll results file.
data: begin of rgdir occurs 100.
        include structure pc261.
data: end of rgdir.
data: result type pay99_result.
data: rt_header type line of hrpay99_rt.
data: country like t001p-molga,
      number like pc261-seqnr. "Number of last payroll result
types :begin of struc_p0001,
       pernr type p0001-pernr,
       ename type p0001-ename,
       werks type p0001-werks,
       btrtl type p0001-btrtl,
end of struc_p0001.
data : gtab_p0001 type table of struc_p0001,
       gwa_p0001 type struc_p0001.
types : begin of struc_payroll,
        text(10) type c,
        date     type dats,
        month(2) type c,
        year(4) type c,
        abkrs(2) type c,
        end of struc_payroll.
data : gtab_payroll type table of struc_payroll,
       gwa_payroll type struc_payroll.
types : begin of struc_result,
       lgart type lgart,
       lgtxt type t512t-lgtxt,
       betrg type betrg,
        end of struc_result.
data : gtab_result type table of struc_result,
      gwa_result type struc_result.
get pernr.
rp_provide_from_last p0001 space pn-begda pn-endda.
call function 'CU_READ_RGDIR'
    exporting
      pernr          = p0001-pernr
    importing
      molga           = country
    tables
      in_rgdir        = rgdir
    exceptions
      no_record_found = 1
      others          = 2.
if sy-subrc = 1.
    write: / 'No records found for '(001), pernr-pernr.
endif.
call function 'CD_READ_LAST'
    exporting
      begin_date      = pn-begda
      end_date        = SY-DATUM
    importing
      out_seqnr       = number
    tables
      rgdir           = rgdir
    exceptions
      no_record_found = 1
      others          = 2.
if sy-subrc = 1.
    write: / 'No payroll result found for'(002), pn-paper.
else.
    call function 'PYXX_READ_PAYROLL_RESULT'
         exporting
              clusterid                    = 'RX'
              employeenumber               = p0001-pernr
              sequencenumber               = number
        READ_ONLY_BUFFER             = ' '
        READ_ONLY_INTERNATIONAL      = ' '
        CHECK_READ_AUTHORITY         = 'X'
   IMPORTING
        VERSION_NUMBER_PAYVN         =
        VERSION_NUMBER_PCL2          =
         changing
              payroll_result               = result
         exceptions
              illegal_isocode_or_clusterid = 1
              error_generating_import      = 2
              import_mismatch_error        = 3
              subpool_dir_full             = 4
              no_read_authority            = 5
              no_record_found = 6
              versions_do_not_match        = 7
              others                   = 8.
    if sy-subrc = 0.
      perform print_rx.
    else.
      write: / 'Result could not be read (003)'.
    endif.
endif.
      FORM PRINT_RX                                        *
      Print Payroll Result                                 *
form print_rx.
format intensified on.
write: / p0001-pernr,
           p0001-ename(15),
           p0001-werks,
           p0001-btrtl.
format intensified off.
skip 1.
move p0001-pernr to gwa_p0001-pernr.
move p0001-ename(15) to gwa_p0001-ename.
move p0001-werks to gwa_p0001-werks.
move p0001-btrtl to gwa_p0001-btrtl.
append gwa_p0001 to gtab_p0001.
write: / 'For period/payroll area: '(004),
           30 result-inter-versc-fpper+4(2),
           result-inter-versc-fpper+0(4),
           result-inter-versc-abkrs,
           / 'In-period/payroll area: '(005),
           30 result-inter-versc-inper+4(2),
           result-inter-versc-inper+0(4),
           result-inter-versc-iabkrs.
skip 1.
gwa_payroll-text = 'For'.
move result-inter-versc-fpper to gwa_payroll-date.
move result-inter-versc-fpper+4(2) to gwa_payroll-month.
move result-inter-versc-fpper+0(4) to gwa_payroll-year.
move result-inter-versc-abkrs to gwa_payroll-abkrs.
append gwa_payroll to gtab_payroll.
gwa_payroll-text = 'In'.
move result-inter-versc-fpper to gwa_payroll-date.
move result-inter-versc-inper+4(2) to gwa_payroll-month.
move result-inter-versc-inper+0(4) to gwa_payroll-year.
move result-inter-versc-iabkrs to gwa_payroll-abkrs.
append gwa_payroll to gtab_payroll.
write: 'Results table: '(006).
skip 1.
loop at result-inter-rt into rt_header.
    perform re512t using result-inter-versc-molga
                         rt_header-lgart.
    write: / rt_header-lgart,
             t512t-lgtxt,
             rt_header-betrg currency rt_header-amt_curr.
move rt_header-lgart to gwa_result-lgart.
move t512t-lgtxt to gwa_result-lgtxt.
move rt_header-betrg to gwa_result-betrg.
append gwa_result to gtab_result.
endloop.
endform.                    "print_rx
      FORM RE512T                                          *
      Read Wage Type Texts
form re512t using value(country_grouping)
                  value(wtype).
check t512t-sprsl ne sy-langu
     or t512t-molga ne country_grouping
     or t512t-lgart ne wtype.
select single * from t512t
              where sprsl eq sy-langu
              and   molga eq country_grouping
              and   lgart eq wtype.
if sy-subrc ne 0.
    clear t512t.
endif.
endform.                                                    "re512t

QC51:No certificate is required for the purchase order item

Dear all.
I want to create an certificate Receipt In the T-CODE QC51.After input the purchase order and item and press return,the SAP show an error message:
No certificate is required for the purchase order item.
Message no. QC508
My question was where to control the purchase order item to require certificate or not?
Regard
Yoda

Hi
For this you have to maintain Certificate req in Material master.
MM01>Enter your material->Quality view-->Tick on QM procurement->Certificate require-Mension kind of certificate req.
like
E21     Cert. of conformity "2.1" EN 10204
E22     Test certif. "2.2"         EN 10204
E23     Works test certif. "2.3"   EN 10204
E31A     Insp. certificate "3.1.A" EN 10204
E31B     Insp. certificate "3.1.B" EN 10204
E31C     Insp. certificate "3.1.C" EN 10204
E32     Inspection report "3.2"    EN 10204
Q001     Conformance Report
Q002     Plating Certificate
Q003     Test Report
Q004     Certificate through Web
Q005     Chemical / Physical Test report + QC
etc.....
Customizing for this can be done in
SPRO->Quality Management->QM in Logistics--->Define Keys for Certificate Processing.
This will ask you during MIGO or during UD/confirmation possible thro' QC21
Regards
Sujit S Gujar

Advise required for the scenario logic

Similar Messages

Maybe you are looking for