Advised to disable/reenable web services. Printer console only indicates 'remove web services'.

Four emails stuck in queue. Advised to disable/reenalble 'web services''. Printer displays only
'remove web services'. (HP Officejet Plus 8600 Pro All in one; Windows 7, IE8).

Hello MurrayJ,
Once you remove the web services, the next time you access the web services menu you will be prompted to enable the web services once again. If you have removed we services and are still only seeing this option, then you may need to contact tech support for a semi-full reset.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

Service manager console can't connect to Service manager data warehouse SQL reporting services

When I start Service manager console, it gives this kind of error:
The Service Manager data warehouse SQL Reporting Services server is currently unavailable. You will be unable to execute reports until this server is available. Please contact your system administrator. After the server becomes available please close your
console and re-open to view reports.
Also in EventViewer says:
cannot connect to SQL Reporting Services Server. Message= An unexpected error occured while connecting to SQL Reporting Services server: System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.EnterpriseManagement.Reporting.ReportingService.ReportingService2005.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String searchPath, IList`1 criteria, Boolean And)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String itemPath)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItem(String itemPath, ItemTypeEnum[] desiredTypes)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.GetFolder(String path)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReportingGroup.Initialize()
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath, NetworkCredential credentials)
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup() Remediation = Please contact your Administrator.
We have a four server set-up where SCSM, SCDW, and sqls for both are on different servers. Also I have red that this could be a SPN problem, but this has been worked on last week without the SPNs.

On the computer you get the "SQL Reporting Services server is currently unavailable" message please open the Internet Explorer and try to connect to the URL <a href="http:///reports">http://<NameOfReportingServer>/reports
This should open the reporting website in IE. If this isn't working you should check the proxy settings in IE. If the URL doesn't work in IE it won't work in the SCSM console as well (and vice versa).
Andreas Baumgarten | H&D International Group
Actually I can't access to the reporting website. It asks me credentials 3 times and then return a blank page. Also error message comes to the EventViewer System log with id 4 and source Security-Kerberos.
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server "accountname".
The target name used was HTTP/"reporting services fqn". This indicates that the target server failed to decrypt the ticket provided by the client.
This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using.
Ensure that the target SPN is only registered on the account used by the server.
This error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service.
Ensure that the service on the server and the KDC are both configured to use the same password.
If the server name is not fully qualified, and the target domain (domain.com) is different from the client domain (domain.com), check if there are identically named server accounts in these two domains,
or use the fully-qualified name to identify the server.
I can access the website directly from the server which hosts Reporting Services.
Also I query "setspn -Q HTTP/"reporting services fqn" whit result NO SUCH SPN FOUND.

P1606dn does not print web services printer code

A message appears informing web services printer code will be printed. But it is not printed. This did work once. However i needed to remove the printer from eprintcenter and readd. Readd needed a new printer code??

Hi there hope you are doing well Lochana;
I will need to know what operating system and version of it do you have in your computer? If you need futher assistance.
Watch this video; to get familiar with eprint registration procces
Let's take this steps 1st.
Perform a power reset on the HP product and wireless router, and then restart the computer
Follow these steps to reset your HP printer, your wireless router, and your computer.
Press the Power button ( ) on the HP printer to turn it off.
Disconnect the power cord from the rear of the HP printer.
Disconnect the power cord from the wireless router.
Turn off the computer.
Wait 30 seconds.
Reconnect the power cord to the wireless router.
Wait 30 seconds, or until the router is fully on and ready.
Turn the computer back on.
Wait for the computer to reload.
Reconnect the power cord to the rear of the HP printer.
Turn the printer back on.
Try again to see if get the printe code.
Enable Web Services from the Embedded Web Server (EWS)
Use the following steps to enable Web Services on your HP product.
Locate your product's IP address on the test page you printed previously.
Open an Internet browser (such as Internet Explorer).
Type the product IP address in the browser address bar, and then press Enter .
The EWS opens.
NOTE:If the EWS does not open, your product is not connected to the network. Test your network connections again and return to these steps.
Click the HP Web Services tab.
On the HP Web Services tab, click the green Enable button to enable Web Services.
NOTE:If you see a green Remove Services button, then Web services is already enabled.
When Web Services is enabled, the product prints an information page. This process might take a few minutes. The information page contains the printer code you use to register your HP product at HP ePrintCenter.
Firmware update
A firmware update might help to resolve wireless connectivity issues. Firmware updates are available for download on the Web. Follow these steps to obtain a firmware update for your product:
NOTE:Firmware updates are different from product updates (that were referenced in the previous step). Make sure to perform both types of updates to guarantee that your HP product has the most up-to-date functionality.
Click this link, HP Customer Care , to go to the HP Customer Care Support page.
Type your product number in the search field, and then click Next . You might also need to click your model in a list of similar products.
The product support page displays.
Click Software & Driver Downloads , select your operating system, and then click Next .
Click the Plus sign ( ) next to Firmware to view the firmware updates.
Click the firmware update, and then follow the on-screen instructions to download and install the firmware.
Hope this helps!
RobertoR
▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Looking for a good Javascript to let me know if the "Enable applet plug-in and Web Start Applications is enabled" is disabled or enabled within Java Preferences?

If this code could work on Snow Leopard as well, that would be awesome. I have a code to tell if Java is enable or disabled on any web browser, but it does not detect if the Java Preferences "Enable applet plug-in and Web Start Applications is enabled" is enabled or disabled. Just looking for a specific code to tell if this option is disabled or enabled.
Thank you

Launch Applications/Utilities/Java Preferences.app by double-clicking.
EDIT; But I think you are confusing this with JavaScript which has nothing to do with it.

SQL 2012 Reporting Services Print Control... FIX?

I have an web site that uses ActiveX print control and when there is a SQL update it breaks the print control for all the end users and I have to walk around and enter my admin username/pass to fix this.I have tried a number of fixes such as:Batch script that I did up according to some MS tech blog to pull the new stuff and auto install it on workstations.AD GPO:Computer Conifg Policies Admin Temps Windows Components Internet Explorer Internet Control Panel Security Page Intranet Zone
"Run activex controls and plugins" : Enable
"Script ActiveX Controls Marked Safe For Scripting" : Enable
"Download signed ActiveX Controls" : EnableGave ability to install any printer.Also I have tried various other methods, which I full forget what they were now. Ideas?My Desktops are all running Win 7 x64 Pro. with Internet Exploiter 10 x86.
This topic first appeared in the Spiceworks Community

Hi,
IIS is no longer needed for reporting services the web service and site are native to the ssrs service.
This dependency was removed in 2008 actually.
Here is some info:
http://blogs.technet.com/b/andrew/archive/2007/12/04/sql-server-2008-reporting-services-no-longer-depends-on-iis.aspx
hope this helps.
Chas Hyman

Best Procedure for Creating Web and Print Images

Windows XP SP2, Adobe CS3 Design Premium
Hello,
I have created a book in InDesign and have placed the art from Illustrator into the pages and cover of the book. At the time the book was designed, I gave no thought to the need for having the cover and certain pages also available on the web. (Silly me...)
Is there any way to duplicate the native illustrator files and make them web safe (with the web safe colors) without having to create new swatches and use live paint to recolor the image?
Is there a standard procedure for designing images in Illustrator when you know you will be needing both web and print output? (I'd like to do it 'right' next time.)
Thank you so much for your help.
Cathy

Hi
if you want to create the web service using the function module do the following steps.
the main requirement for creting the web service using the function module is the function should be RFC enabled.
1. To create web service of this Function Module
Go to Utilities ->More utilities->create a web service->from function module
2. A new wizard will be open to create the web service and click on continue.
3. Enter the web service name (any name that you want to give) and give the short description, select the Endpoint type as Fuinction Module and click on continue.
4. Select the Function Module name that you are using.
5. select the profile as Basic Authentication: SOAP Pro.
6. Press continue to release the web service. The web service is now created
To check the web service Go to the transaction WSADMIN and select the node
SOAP Application for RFC-Complaint FMs and expand the node and select your web service that you have created and expand the web service node up to the last .
Now to test the web service select the last node and click on the web service home page button and it will open the home page.
from this page u will get the wsdl file as well as you can testthe web service.
Thanks
Rinku

Remote Desktop Services Printer Redirection with easy print not working as Desired

Hi,
I have a Terminal Server Farm with a number of Windows Server 2008 R2 Remote Desktop Session Host Servers in the Environment. There is also a RD Gateway server which is used to connect to the RD Session host servers in the environment. We
had configure the policy "Use Terminal Services easy Print Driver First" for all the RD Session Host servers. Everything was working well untill a couple of users Complaint about slow printing on Easy Print. While trying to troubleshoot the issue we came
to know that when we by-pass the RD Gatewat and make a Direct connection to the RD Session Host Servers we are able to Print Really fast using Easy Print. Only When we use the RD gateway server we get the problem with the Printing.
As we could not get through this problem and we are not in a condition to by-pass RD Gateway for connections we decided to put the TS Easy print Driver as a Second option. We went ahead and identified the 3 printers for which printing was slow. we
Installed the Drivers for the same printers on all the Terminal Server and Disabled the policy "Use Termianl Server Easy print Driver First". After this we were able to print fast on the 3 printers having Slow printing issues. All the other Printers were using
Easy print.
After a day we realised that there were more than 20 drivers for Different printers installed in the Print Server Properties. We started getting viered problems with the Printing on all the Terminal servers like, Print Spooler Service Crashing, Hanging,
Users not able to redirect printers at all. To avoid this we Removed the Driver Packages but they came back the very next day.
I am not sure what could be causing this kind of behavior. I would really appriciate if someone can help he with these two problems
1) Easy print Working Slow only when using RD Gateway Server
2) Printer Drivers Getting installed on Terminal Servers when Easy Print Policy is disabled.

1) Easy print Working Slow only when using RD Gateway Server
> Difficult to track down especially through forum. Looking for some known issues/hotfixes
954743 FIX: After you apply hotfix 954744, printing performance may be significantly slower when you print documents by using Terminal Services Easy Print
http://support.microsoft.com/?id=954743
The Remote Desktop Easy Print (RD Easy Print or TS Easy Print) uses the XPS print driver that ships with .NET Framework.
2) Printer Drivers Getting installed on Terminal Servers when Easy Print Policy is disabled.
> If Easy print is not the first driver then it installs the driver if they are InBox drivers
> If these are non-inbox drivers - This is because administrators are RDPing to the server from another PC with several printer/drivers installed.
When they RDP with printer redirection enabled, the drivers get automatically installed.
To avoid this, either turn off printer redirection at server level from RDP-TCP properties - might not be feasible if users need redirected printers
Else make sure that when admins RDP, printer redirection is turned off so that drivers are not automatically installed
This was a major issue in 2k3, i havent tested it in 2k8 though
This behavior is related to the change you made in Easy print driver behavior
Sumesh P - Microsoft Online Community Support

Some features have been disabled to avoid potential security risks. Only enable these features...

Hi,
I have a web service call. When I it is pointing to an accessible URL it works beautifully. If, for some reason, the URL is unreachable, e.g. behind a firewall, the PDF displays the yelleow message bar with the message,
"Some features have been disabled to avoid potential security risks. Only enable these features if you trust this document."
and gives you the options to trust the document once or always. Obviously, if the URL is unreachable, then trusting the document once or always, isn't gping to help.
If it wasn't for the yellow message bar, I could present the user with a friendly message by trapping the NetworkError exception in the SOAP call, but why do I get yellow bar messaage? It is totally confusing.
Can someone explain it? Am I overlooking something?

Hi charl,
Make sure the option 'Allow multimedia operations' is checked:
Also check by disabling the protected mode of Acrobat/ Reader:
- Uncheck 'Enable enhanced security'
- Turn 'Protected View' Off
Regards,
Rave

Web page print do not take language other than english. earlier it was working.

I use Firefox 16.0.2 in mylaptop having windows 7 starter. the web pages in languages ther than english is readable. But when i take web page print junk language is coming up. I use cutepdf as my printer. earlier I was comfortably having the print .

Hi,
If cutepdf has an option to embed fonts, you can try enabling it. Usually you may find the options in Firefox '''File''' ('''Alt''' + '''F''') > '''Print''' > '''Properties''' (for cutepdf) but in some cases you may also have to check the documentation/help for the relevant printer. If it was working earlier, you can also try to [https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox reset the print options].
[http://kb.mozillazine.org/Problems_printing_web_pages Printing problems]
[https://support.mozilla.org/en-US/kb/Firefox%20prints%20pages%20in%20a%20different%20layout Options]

Aski user information while trying to print a report from a web application

Hi,
I am trying to print a report from web application. When I click on the print button then the page is redirected to the below link and asking for user information. See the below given link for more help.
_http://<server><port>PlatformServices/service/app/logon.do?appKind=InfoView&service=%2FOpenDocument%2FappService.do&backContext=%2FOpenDocument&backUrl=%2Fopendoc%2FopenDocument.jsp%3FSERVICE%3D%252FOpenDocument%252FappService.do%26OBJIDS%3D20016421%26backUrl%3D%252Fcontent%252Fview.do%26PREF%3DmaxOpageUt%253D200%253BmaxOpageC%253D10%253Btz%253DUS%252FPacific%253BmUnit%253Dinch%253BshowFilters%253Dtrue%253BsmtpFrom%253Dtrue%253BpromptForUnsavedData%253Dtrue%253B%26CONTAINERID%3D6424083%26backContext%3D%252FPlatformServices%26LOC%3Den%26APPKIND%3DInfoView%26PVL%3Den%26ACTID%3D280%26service%3Dtimeout&backUrlParents=1&appName=OpenDocument&prodName=BusinessObjects+Enterprise&cmsVisible=false&cms=<servername>%3A6600&authenticationVisible=false&authType=secEnterprise&sso=false&sm=true&smAuth=secLDAP&persistCookies=true&sessionCookie=true&useLogonToken=true
The instance Id for the report is generated successfully and the staus of the report is showing as success on Business Objects server side ie. crystal server side.
And we are using OpneDocumentURL for generating the report. And the in the URL we are passing the "Instatce ID" and the "Token" which Both are generated successfully.

Hi,
This is a crystal report link which i am trying to print.
The actual URL to generate a report is,
http://servername:port/OpenDocument/opendoc/openDocument.jsp?&iDocID=22874532&token=systemname%4022874531JOLS2B40fr7cuAE522874529JVB36Yr3PswjM7IP
but it is redirected to below URL,
http://servername:port/PlatformServices/service/app/logon.do?appKind=InfoView&service=%2FOpenDocument%2FappService.do&backContext=%2FOpenDocument&backUrl=%2Fopendoc%2FopenDocument.jsp%3FPREF%3DmaxOpageUt%253D200%253BmaxOpageC%253D10%253Btz%253DUS%252FPacific%253BmUnit%253Dinch%253BshowFilters%253Dtrue%253BsmtpFrom%253Dtrue%253BpromptForUnsavedData%253Dtrue%253B%26service%3Dtimeout%26CONTAINERID%3D21700595%26backContext%3D%252FPlatformServices%26ACTID%3D279%26OBJIDS%3D22874532%26SERVICE%3D%252FOpenDocument%252FappService.do%26APPKIND%3DInfoView%26LOC%3Den%26PVL%3Den%26backUrl%3D%252Fcontent%252Fview.do&backUrlParents=1&appName=OpenDocument&prodName=BusinessObjects+Enterprise&cmsVisible=false&cms=systemname&authenticationVisible=false&authType=secEnterprise&sso=false&sm=true&smAuth=secLDAP&persistCookies=true&sessionCookie=true&useLogonToken=true
-VinodC

Web Service Proxy client to invoke a Web service on SSL (Jdev 10.1.3.1)

Hi,
I have to develope a Web Service proxy client to invoke a web service on SSL. First I'm testing with OC4J 10.1.3.1 and JDEV 10.1.3.1 and did this:
1) Developed a basic PL/SQL Web Service with JDEV and publish on my standalone OC4J.
2) Made a test with a browser, it worked OK
3) Generated a proxy client from JDev 10.1.3.1 to invoke web service, it worked OK
--- Now make it work on SSL----
4) Then, added SSL configuration to oc4j , generated a certificate with keytool (updated server.xml, secure-web-site.xml), and shutting down and starting the OC4j instance.
5) Import the certificate to JAVA_HOME/jre/lib/security/cacerts
6) Test web service from browser on https and worked OK.
7) When tried to modified proxy client (generated in step 3) to make it work on SSL, I realized that just changing the END_POINT to the new url (https) it worked!
Questions----
1.- By default the proxy client generated from JDEV 10.1.3.1 knows how to deal with SSL conections?
2.- If I dont have previously the server certificate to import it into JAVA keystore (cacerts) how could I ,from proxy client code, capture it and import it before the validation occurs... because if the certificate is not in keystore , the program fails.
Thanks in advance
J.

Hi,
Could you please provide me with the steps necessary to create a web service proxy client through JDeveloper or any other mechanism when 2 way SSL (requiring client authentication) is enabled.
Thanks a lot in advance
Nilesh

Acrobat 8.1.7 -- Error 1920.Service Print Spooler?

I have a valid key on an installed version of Adobe Acrobat 8.1.7. (AA8 Standard installed on a XP system)
It fails to create a PDF document and the Error 1920 apprears before it shuts down.
When, per representative suggestion, I attempt to uninstall it and then re-install with the valid key, it then reports:
Error 1920.Service Print Spooler (Spooler) failed to start. Verify that you have sufficient priviledges to start system services.
I verified that I have a valid key on My Adobe using my email address, etc.
But I see no way out of this 'dead end'.
After attempting to remove or repair the installation in add/remove programs, I get the support info:
Adobe Acrobat 8.1.7 - CPSID_50029
But when I go there I see nothing that tells me how to fix the problem.
How do I unstall and re-install this so I can continue to use my AA8 on my XP system?

David:
I found that helpful input, yes.
The tech I spoke with told me to use a cleaner program to force erasure so
I could reinstall it.
He failed to tell me that you better be sure you have your original disk,
because you can't download AA8 via a web.
The best solution is to upgrade, which I would be more likely consider if
some consideration were given for all the headaches of trying to get AA8
back up and running.
The principal being "If you can't make what I already have work, why should
I pay for your update?"
I will continue to look for the disc and let you know how that goes....
Dave

"Adobe Acrobat is blocked" - Where to I accept the end user agreement which will enable me to access Pdf documents on the web?

I keep getting this message when trying to open documents from the web:
"Adobe Acrobat is blocked" -
Where to I accept the end user agreement which will enable me to access Pdf documents on the web?
The Adobe website recommends this: (did not solve the problem)
Safari 7 and 6.1 block PDFs | Acrobat, Reader
Thanks for any help solving this annoying problem!
OSX 10.9.3
Safari 7.0.4
Acrobat Pro 11.0.0

Hello Isakten:
Thanks so much for your reply!
I already have Adobe Reader 11.0.7 and Adobe Acrobat Pro 9 installed.
Following your instructions, I then selected Reader as the desired Adobe product to open all PDFs. and save that choice. Still no difference, the same black screen and statement about the EULA shows up…
http://www.nhgastro.net/patients.html
BTW, this is the website that I was accessing……note the link to download and print the pdf which triggers the EULA page.
and also downloaded the latest version of Reader via their link….but to no success…..
This all started by itself months ago, I did no newer installs or settings changes, none……
Any other thoughts?
Thanks so much,
Steve

Disable and enable field at runtime in sap crm 2007

Dear experts!
   I created 2 new fields on Opportunity type by EEWB. The first field is checkbox type, is called FIELD1. The second is dropdown list type, is called FIELD2. My problem is: In general, if FIELD1 is not checked, FIELD2 is disalbe. When i checked FIELD1, FIELD2 is enable, enable to choose a value in dropdown list value of FIELD2. But, i don not know how to do it. Can you help me resolve this problem?
   Thanks alot!
   Longndtb.

Thanks Amar Nath and sijokjohn85 for your answer!
   But maybe i have not described clearly to you understand, so your solution has not resolved my problem. I will describe more detail as following:
   - I create 2 transaction type ZOP01 and ZOP02 are BUS200111 object type. And using EEWB to generate 2 fields type input field are ZZFN01 and ZZFN02 on those transaction type. Because 2 Trans type are common component BT111H_OPPT, so 2 fields ZZFN01 and ZZFN02 will display on Web UI together when i create either of 2 trans type. Problem is if i create new opportunity type ZOP01, only ZZFN01 is enable, ZZFN02 is disable. and if i create new opportunity type ZOP02, only ZZFN02 is enable, ZZFN01 is disable. Your solution to resolve this problem. But, i done it, and my thread do not question about this.
   - My problem is: I create 2 field are ZZFN01 and ZZFN02 on transaction type ZOP01. ZZFN01 is checkbox type, ZZFN02 is dropdown box. (i do not question: How to make ZZFN01 is check box and ZZFN02 is dropdown box, i done it). I want that: when ZZFN01 is not checked, ZZFN02 is disable and when i checked the ZZFN01 then, ZZFN02 goes from disable to enable, immediately? I create method GET_I_ZZFN02, in this method, i put some code lines to check ZZFN01 and return to PA_RETURN_ZZFN01. if (PA_RETURN_ZZFN01 = ' ', then make ZZFN02 is disable. If (PA_RETURN_ZZFN01 = 'X', then make ZZFN02 is enable). when i create new opportunity type ZOP01, the ZZFN01 is not checked, so ZZFN02 is disable, of course. Next, i check ZZFN01, how to method GET_I_ZZFN02 recheck the ZZFN01 to make ZZFN02 is enable? This is my problem, and i question about this! So, can you help me?
   Thanks for your concern!
   Longndtb.

I use an iMac running V. 10.10.2. I have an Epson WP-4530 printer. Is there a printer driver that will enable one to print photos from color negatives?

I use an iMac running V. 10.10.2. I have an Epson WP-4530 printer. Is there a printer driver that will enable one to print photos from color negatives?
I have already tried downloading the drivers from Epson as per one person's suggestions, but the dialog box isn't anything like what was suggested--the choices in the box weren't the same for the most part. I don't want to lock up the computer or disable the printer for normal printing, but I have a lot of old negatives that I would love to have prints from.

I am using the latest software from Epson for Mac OS 10.10.2 that I downloaded last week. I seem to remember that the older software (we're talking 6-8 years ago) had to option to scan slides or negatives and would convert the results into positives via the scanner. I don't like the most recent scanning software because it jumps right into the scan before giving you a chance to change the options. It uses the selected options from the previous scan which are sometimes right, sometimes wrong. Thanks for your reply to my question!

Advised to disable/re​enable web services. Printer console only indicates 'remove web services'.

Similar Messages

Maybe you are looking for

Advised to disable/reenable web services. Printer console only indicates 'remove web services'.