Advocacy Tool using BC?

I am going to be doing some work for a non-profit. As part of this non-profit's work is to get the word out about changes in law and how to contact your representative for your area. Currently they link to another website that has the contact information. I would like to simplify this process for the end user. The idea is to have the person enter their zip code which will then display the contact information for their appropriate representatives and allow them to contact the representatives on whatever issue has arisen via a web form on the same page.
I believe it is possible using webapps but not 100% sure. The one drawback I see is maintenance. Every election at least some representatives will change, thus the tool must be updated. I have seen a few tools that will do this for me but they can be expensive for a non-profit and these tools may not (easily) integrate into BC.
This leads me to my question:
Has anyone built this type of system on Business Catalyst and/or have any advice for doing this?

I think I seen this run into the issue of State. By default if this app uses lattitude and longitude tags to function this will not work in coutnries outside of countries with states. State is a requirement for BC to render these tags.
Not sure if the Simpleflame guys have corrected that etc but seen a few people on these forums with issues in regard to that.

Similar Messages

  • How are Windows Server Backup and Command Line Tools used in vCSHB installation?

    How are Windows Server Backup and Command Line Tools used during the installation of vCSHB?  Is it required in all types of deployments (PtoV, VtoV, PtoP)? Is it used to create the files that are put in the file share for the second node to use during vCSHB installation or is it only used during a vCSHB clone operation of a Physical to Physical deployment?  Are these tools not used in some deployments?

    You need Windows Server Backup installed on source and destination, and during the installation of vCSHB the installer will invoke the wbadmin (Windows Server Backup Utility) and will backup configuration and application data (application data is optimal but can decrease the sync time after installation of secondary node). On the secondary node you will need only run the vCSHB installer and everything will be restored.
    Check this blog entry for some more info about some problems in P2P deployment: http://www.vcoportal.de/2013/12/vmware-vcenter-server-heartbeat-restore-on-a-second-node-a-journey/

  • What are the tools used in supporting project l2 & l3

    hi , good morning everbody.....
    what are the tools used in supporting project ..............
    thanks,
    hari shankar.

    Tools used in support project are client & company specific.
    few tools are mentioned below.
    clarify---Support & tracking tool
    SAP solution manger---help  desk & support function feature
    regards,
    Raghu
    award if helpfull

  • Tool used for knowing the performance

    Which is tool used in oracle to know the performance of the query executed with time taken for execution???

    hi
    In SQL plus, please use the below command and then run the Query to know the time taken by the query.
    SQL>Set Timing on
    Regards
    K.Rajkumar

  • How to make smooth line by brush tool using shift key?

    Heya, I have a short question. Is there a way to make smooth line by brush tool using shift key, without that characteristic dot on the begining? I'm using PS CS6 on Win7.
    http://i.imgur.com/orGsIwv.jpg
    Cheers

    The shift key constrains the brush to paint a straight line. Those dark spots you see are from two paint strokes overlapping each other. If the flow or opacity of the brush is not at 100% you can see the stroke below it.

  • Cinema Tools use

    Can somebody explain to me what is Cinema Tools use for?
    I have been using FCP for some time now and never open Cinema Tools
    What does it do?
    thank you

    http://www.apple.com/finalcutstudio/finalcutpro/cinematools.html

  • What is Cinema Tools use for?

    I had asked this question in the Cinema Tools forum, but haven’t gotten an answer, so I thought I’d asked here.
    Can somebody explain to me what is Cinema Tools use for?
    I have been using FCP for some time now and have never open Cinema Tools
    What does it do?
    Thank you

    Perhaps checking the online help or the manuals would help. I can't give you a definitive answer, but let me tell you what I've used it for. Film is normally shot at 24fps. When it's transferred to video it's slowed down to 23.986 fps and then 3:2 pulldown is added (fields are repeated in a particular order) to change the frame rate to 29.97 fps without changing the speed. There are several reasons you might want to remove this pulldown and restore your film to a progressive 23.986 frame rate.
    I'd suggest opening the program up and exploring the menus and looking up any terms you don't understand in the manual.
    Message was edited by: Michael Grenadier

  • How can I disable Select Tool & enable Hand Tool using Adobe JavaScript ?

    How can I disable Select Tool & enable Hand Tool using Adobe JavaScript ?
    I want wherever the PDF opened automatically preferrence changed, default HAND TOOL remain selected. I want to do it using Adobe JavaScript.

    You are correct in that it's not functioning, however I do not have that option under the "online and adobe online" section in Adobe Customization Wizard XI.  I have the following boxes that can be checked:
    "Disable initiating shared reviews and data collection via distributed forms using Adobe online services (does not affect non Adobe online services reviews and forms).
    "Disable the Tools pane in Reader"
    "Disable file storage on Adobe online services"
    "Enable file storage even when all other services are disabled"

  • What are tools used by the xi/pi system ,to bug the errrors

    hi gurus,
    what are tools used by the xi/pi system ,to bug the errrors.
    regards,
    subba reddy

    For all kind of errors the only tool available which bugs or say alerts for the error is Alert Management.
    Alerts are messages which can be raised in case of failure.
    Alerts - used for system errors, u can send a mail or msg whenever there is any failure. alert configuration can be done in t-code - ALERTCATDEF.
    Alert Categrory can be defined in transaction ALRTCATDEF on abap stack. we can assign receipients to every alert category which specifies who will receive alert in case of error.
    Alert rules can be defined in RWB.
    for configuring alerts u need follwing roles first for defining or creating alertcategory
    the roles reuired to access the RWB are:
    1. SAP_XI_RWB_SERV_USER
    2. SAP_XI_RWB_SERV_USER_MAIN
    The roles for the Alert Management are:
    1. SAP_ALM_ADMINISTRATOR
    2. SAP_ALM_CUSTOMIZER
    3. SAP_BC_ALM_ALERT_USER
    Once this is done
    alert category is defined and then tested
    For Alert please see
    The specified item was not found.
    http://help.sap.com/saphelp_nw04/helpdata/en/56/d5b54020c6792ae10000000a155106/content.htm
    For details follow this link,
    http://help.sap.com/saphelp_nw70/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm

  • Is there any tool uses Selenium tests for performance test

    Hello!
    I am looking for a tool for using performans test.
    I have Selenium test scenarios and I want to use them for performance tests.
    Which tools use Selenium tests for performance tests or
    Which are the best tools to test a JSF Application? Which experiences
    have you made?

    Hi,
    If you have the test kit installed i.e. the CTK , then you will find it under the corresponding test folder. For example , i have it under C:\Program Files (x86)\WindowsEmbeddedCompact7TestKit\tests\target\
    The test harness files , tux and kato can be found under 
    C:\Program Files (x86)\WindowsEmbeddedCompact7TestKit\harnesses\target\
    The above two files tux and kato would be required for running any tests on Windows embedded compact platforms.
    Depending on your platform , you may choose to use the corresponding binaries in the sub directory.
    Regards,
    Balaji.

  • What are the tools used in Gathering the Requirement?

    Hello Guys,
    "What are tool used on gathering a requirement from Client"?
    Thanks,
    Farhan.

    QADB  this is question answer database tool
    it has every question about ur entrprise stucture once you fill the information it s helpful in generating a blueprint
    like
    it has two parts qadb
    left hand side is a tree structure like your sap
    if u click on it then a related wuestions come on right hand side there u fil the answers which are told by ur clients business side.
    and fill this inforamtion.

  • How to save the selection of quick select tool using scripts?

    I am writing a script to record the edit history and I want to save the select area of quick select tool using scripts. 

    Yeah, that's true. If we active the HistoryState, we can see the selection area in  photoshop, however when we save the HistoryState in  jpg, the dotted line disappears. 

  • What r the integration tools used in SAP

    Hi all,
    Please let me know What r the integration tools used in SAP

    BAPI - These are published programs which is used to upload data i
    nto SAP system.
    BADI - This is a program enhancement technique. SAP pr
    ovides BADI openings in the standard programs. You need to search for the s
    uitable BADI as ur requirement and then do the coding and plug in the progr
    am.
    IDoc (for intermediate document) is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system. IDocs are used for asynchronous transactions: each IDoc generated exists as a self-contained text file that can then be transmitted to the requesting workstation without connecting to the central database. Another SAP mechanism, the Business Application Programming Interface (BAPI) is used for synchronous transactions.
    Afrasyab

  • A tool used by TP aborted -- Error after DB upgraded to rel 9.2.0.8.0

    We have upgraded to the latest Release of 9.2.0.8.0 on the ORACLE Database and also the latest Patches on AIX OS. This patche application has had an effect on the SAP application's Transport Management.
    We are getting the error " A tool used by TP aborted" with error code 12.
    A search on OSS notes suggests to a kernel problem, and we have upgraded to the Latest Kernel available for SAP. We are running on SAP 4.7 and SAP_BASIS Release level 6.20.
    Did any one face the problem inrecent times... Any inputs would be great.
    Br,
    Sri

    Hello,
    sorry but Oracle Client 9.2.0.8 is not present in the software download center in the SAP Service Marketplace (neither in 32 bits or 64 bit platforms).
    Pls look there and fine that the latest version is 9.2.0.7.
    Are you on Windows or Unix?
    Bye
    Renato

  • Some tools used for upgrade project

    Hi experts,
    I am looking for some tools used for upgrade project.What are the frequently used tools in an upgrade project.
    Regards,
    Kiran

    Hi,
    There is no specific tool for the upgradation. it dependts on organization. if it has developed its own tool means that is used for the upgradization. noramlly company gets the project based on the presentation of their tool.
    our company has a great tool for the upgradization. which find out all unicode related errors and changes that has to be done in new verion.
    like this each organization might havedeveloped their tools.
    Regards,
    Anki Reddy

Maybe you are looking for

  • Error while creating a column in master

    Hi all, I am using the sap business one 8.8 version. I am getting an error while creating a user defined column for a master table. The error code is -104. The method I had used for creating a master table is as follows. *#region Create Table*       

  • How do I create a db in Oracle 9i Lite?

    I have used Oracle 8i Lite on handheld computers in a replicated environment for quite some time now. I am in the middle of setting up a demo tablet computer, but since Oracle 8i Lite is no longer downloadable from the Oracle website, I instead downl

  • Problems with printing a sheet in numbers - duplicates pages

    For some reason, numbers is printing duplicates of my spreadsheet.  The first sheet should be 9 pages long, but when I put it in print view, there are 27 pages - the 9 and then two copies of them.  How do I delete the extra copies?  I can't seem to f

  • Transfer video to ipad without computer/itunes

    My macbook pro recently died and I can't afford to get a replacement right now. So I would like to know if there are any apps/programs to install on my bf's computer so that I can transfer videos from his computer to my ipad without clearing my ipad.

  • Help needed joining 2 prels in one movie

    Hi I want to join two PE9 prels together in on movie, how do I do this? Kind Regards ... Andy