Adware has access to system even when the site is blocked.

ad.yeildmanager.com and all of its' buddies have free access to my system even when the sites are blocked. It only seems to occur when I am at Yahoo and spammers were using my account.
Norton, McAfee, MS, and Pest Patrol find no bugs and show life is great.
Every morning I show new program installed but no listing for it.
I love the browser but

This new 'feature' is controlled by these two prefs.
*security.mixed_content.block_active_content
*security.mixed_content.block_display_content
*https://developer.mozilla.org/Security/MixedContent
*https://addons.mozilla.org/firefox/addon/toggle-mixed-active-content/

Similar Messages

It has been only about a month that i bought my macbook pro 15 but it is heating up really fast on the left side even when the cpu usage is only 10%...i'm worried if this is a problem of the hardware.

it has been only about a month that i bought my macbook pro 15 but it is heating up really fast on the left side even when the cpu usage is only 10%...i'm worried if this is a problem of the hardware?

The way something "feels" is very subjective. We would need to know your actual temps. You can install the free iStat Pro widget which is available as a download directly from Apple:
http://www.apple.com/downloads/dashboard/status/istatpro.html
Let us know what CPU temps you're seeing at the time you feel your machine is hot. As you indicated your CPU usage was only 10%, that would imply that you already know that heavy CPU usage would be one cause for your machine to be running on the warm side... but that doesn't seem to be the cause here.

How to access my hard drive when the system does not work

how to access my hard drive when the system does not work

Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup Issues - Resolve
Startup Issues - Resolve (2)

My ipod keeps searching for network, even when the network info is all set properly. It has suddenly started doing this. Also, buffering forever...

My ipod keeps searching for network, even when the network info is all set properly. It has suddenly started doing this. Also, buffering forever... I have tried to reset the network few times, but not working.

Hello Nazer_502,
I would be concerned too if my iPhone was acting this way. It sounds like it is overheating and not holding a charge. I recommend following the steps listed below when experiencing an issue like this:
Battery life seems short
Click ( www.apple.com/batteries/iphone.html) for tips on how to prolong iPhone's battery life.
Try turning iPhone off and then on again.
Connect iPhone to iTunes and restore iPhone.
If the screen shows a low-battery image, the battery is low on power and needs to charge for up to ten minutes before you can use it.
When charging iPhone, make sure to leave it charging until it is fully charged. You'll know the battery is fully charged when the battery icon in the upper-right corner of the screen looks like this .
Note: When charging using a computer, don't connect iPhone to a keyboard. Also, the computer must be turned on and not in sleep or standby mode. If iPhone is connected to a computer that's not turned on or is in sleep or standby mode, the iPhone battery may drain.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

When i go to update my app i have to put my apple id password but instead of having my email address it has someone else's. On my computer it has my email on my itunes it has my email, and even on the app store it has my email

when i go to update my app i have to put my apple id password but instead of having my email address it has someone else's. On my computer it has my email on my itunes it has my email, and even on the app store it has my email

Did you purchase the iPhone second hand?
Has anybody else signed into their Apple ID on your iPhone?

My phone won't use IMessage even when the person I'm txting has an iPhone why?

Why won't my phone use iMessage even when the person in txting has an iphone

I'm having same problem with sending to 3 people from a particular WiFi Network. For two people the iMessage i write is sending, but stops just before Delivery and then says not delivered. For the third person it immediately sends as text message.
Answered to questions above.
Can I send to others... Intermittent. Usually no, but then at some point a lot of iMessages comes at once.
Settings have been enabled.
Also other persons settings/Messages are enabling iMessage.
Enabled for WiFi + non roaming cellular ( at my end it should mean only wifi as I am in roaming area with wifi available).
Numbers are all enabled as we have used them a lot of times, an no changes or upgrades this month.
So: it seems to me to be a WiFi issue here, but the odd thing is that it sometimes lets iMessages through.
e-mail and browsing works fine.
Any suggestions?

My Iphone still won't charge even after I had tried plugging it in and waiting then restarting it, it still showed up on the screen that it has to be charged, even when it was in the USB port. Help please

My Iphone still won't charge even after I had tried plugging it in and waiting then restarting it, it still showed up on the screen that it has to be charged, even when it was in the USB port. I tried plugging it into the wall, a computer, I even switched out the USB cables but it still wouldn't charge. Help me please

Hello Isabellap,
It sounds like your iPhone 4S is not charging when plugged in. I found an article with some steps that might help with this. I recommend reviewing the steps in the sections titled "Battery does not charge from the USB power adapter" and "Will not turn on, will not turn on unless connected to power, or unexpected power off" in the following article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Credit exposure updating even when the sales order is blocked

Hi,
We are using FSCM credit management. We observed that the credit exposure is updated even when the sales order is blocked. When we investigated it is found out that SD has removed the requirement 101 in the subsequent functions. The reason is they want the confirmed quantity to be updated even though the order is blocked. This will allow the Material Planning to go ahead and purchase the goods. Is there a way around it where we can have MM see the confirmed quantity in the order and it will not updated the credit exposure?
Thanks and Regards
Madhu Vutukuri

Hi Sravan,
Please let us know, whether the document is really getting reflected in the blocked documents list for a particular kind of block and you are releasing that particular block in the specified area as we have different areas for releasing blocks. Chances are that in the mean time, the concerned block might have been removed in the system and not updated as it might have been. It will be of great help, if you can provide us with the screenshots of the process followed.
Regards,
Aman

Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?

Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?

There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not be apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
3. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
4. Reset the System Management Controller.
5. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
6. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
7. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and the unit needs to be serviced or replaced.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

Problem: Fan at full speed all the time - even when the Mac is turned off

Hello,
my Mac mini suffers from a very strange problem. I've had it for half a year now and recently bought a new power adaptor since my old one got damaged. I plugged it in and everything was fine - until half an hour afterwards, when the fan suddenly made itself noticeable at full speed. But it didn't stop; it went on, curiously even when I shut the Mac mini down. That's right. even when the system's turned off. The noise is really unbearable and only stops when I plug off the power cord.
Any ideas why this is happening?

My Mini started doing this yesterday. I came home from work and the fan was going full blast. Even after shutting the machine down, the fan would continue to run at full speed (and it is LOUD...much louder than my full tower desktop PC with 4 80mm fans). The only way to stop the fan is to completely unplug the Mini from the power supply.
I doubt that this is due to faulty wiring as my Mini is plugged in to a very nice UPS unit that conditions the power.
Now, I'm willing to admit that this may be entirely my fault since I have upgraded my Mini with 1 GB of RAM, a Pioneer DVD burner, and a higher capacity hard drive. However, the Mini has been running 24-hours-a-day for 5-6 months since my final upgrade, so it would seem that my upgrades are unrelated to this issue. Also, since someone else is having the same problem, again, my upgrades seem unrelated.
I was told on another forum to try resetting the PMU, which I will try when I get home today. If it works, I'll post. Seems unlikely though since the fan runs even when the Mini is powered down.
If anyone has any other ideas, I'd be glad to hear them. I'm assuming that my Mini is no longer under the 1-year warranty since I have performed so many upgrades myself, so, if this problem is something that can only be fixed by Apple, then it will probably cost an arm and a leg.

Does OS installed through boot camp or in virtual machine has access and full control of the peripherals like native OS X Lion?

I am planning to buy new PC for my faculty needs and this time I am thinking to buy Apple laptop like Mac book Pro 13" or so ( I owe already IPhone and Ipad 2)
To make final decision I need few information . These are:
1. May I use Boot Camp or similar utility software to install Windows 7 OS next to OS X Lion, or use some kind of virtual box software to create virtual machines with diverse guest OS in them like Windows , Linux etc.?
2. Does OS installed through Boot camp or in virtual machine has access and full control of the peripherals like native OS X Lion?
3. May I use the same disk partitions to access to the files regardless if I am using Windows 7 or OS X Lion operating system?
4. Is there full compatibility between Microsoft Office under OS X Lion and Windows 7 M. Office?
5. What is general user experience with OS X Lion operating system comparing to Windows 7?
Thanks for sharing your experience with me.
Adnan S

adnans wrote:
I am planning to buy new PC for my faculty needs and this time I am thinking to buy Apple laptop like Mac book Pro 13" or so ( I owe already IPhone and Ipad 2)
To make final decision I need few information . These are:
1. May I use Boot Camp or similar utility software to install Windows 7 OS next to OS X Lion, or use some kind of virtual box software to create virtual machines with diverse guest OS in them like Windows , Linux etc.?
2. Does OS installed through Boot camp or in virtual machine has access and full control of the peripherals like native OS X Lion?
3. May I use the same disk partitions to access to the files regardless if I am using Windows 7 or OS X Lion operating system?
4. Is there full compatibility between Microsoft Office under OS X Lion and Windows 7 M. Office?
5. What is general user experience with OS X Lion operating system comparing to Windows 7?
Thanks for sharing your experience with me.
Adnan S
1. Yes. You can install Windows 7 natively using Boot Camp Assistant or you can install Windows 7 in a virtual machine using Parallels, Fusion, or VirtualBox
2. If installed using Boot Camp Assistant Windows 7 uses all your computer's resources just as OSx does. If installed using a VM Windows 7 will share the computer's resources with OSx.
3. A Boot Camp partition is separate from the OSx partition. The VMs allow sharing of files across partitions since both OS are running at the same time.
4. No, not 100%.
5. Too broad a question. Be specific about what feature you are asking about or search the Internet for comparisons. I use both and find they both work well.

File.exists() returns false even when the file exists

hi,
the exists() function of java.io.File function returns false even when the file exists on the file system. why is this? i checked the path of the file which gives me the correct path, but exists returns false. can anyone help?

post some of the code you�re using - then maybe I can help you out
//Anders

Help! iWeb won't open properly after I updated to Yosemite. No old websites, no workspace- nothing is displayed even when the app is open. HELP!

Help! iWeb won't open properly after I updated to Yosemite. No old websites, no workspace- nothing is displayed even when the app is open. HELP!

To open your domain file in Lion, Mountain Lion or Mavericks or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with AppleScript Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script"/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"
delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain. Note: you may have to Control (right) - click on the app after uncompressing and select Open due to the Sandboxing feature of OS X. If you have problems with the app create your own with AppleScript Editor.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible in Lion or Mt. Lion enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
For Mavericks and Yosemite go to your Home folder and use the View ➙ Show View Options menu to bring the this window:

I am unable to tell when the battery is completely charged. I have showing the battery symbol with the bolt-this is present even when the device is not being charged. And it is always showing 2% charge.

I am unable to tell when the battery is completely charged. I have showing the battery symbol with the bolt-this is present even when the device is not being charged. And it is always showing 2% charge.

Are you using the AC wall charger?
To check status, I use System Activity Monitor app http://itunes.apple.com/us/app/system-activity-monitor/id306192663?mt=8 and System Status Lite app http://itunes.apple.com/us/app/system-status-lite-device/id407752428?mt=8
 Cheers, Tom

Save as does not Create PDF Compatible File even when the creare pdf compatible files is on, Illustrator CC 2014

save as does not Create PDF Compatible File even when the creare pdf compatible files is on, Illustrator CC 2014

When I open is adobe acrobat I get this message.
"This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command."

Adware has access to system even when the site is blocked.

Similar Messages

Maybe you are looking for