AE 2220 - USB Devices Not Working

My AE 2220 will not properly mount and access USB devices in any of the USB ports. I've unsuccessfully tried to use three different thumb drives and a Sony camcorder and experimented with every available USB port. The AE 2220 is running the factory default Windows 7 installation. AFAIK, USB devices never properly worked. Not sure what to do from here.
Here are some symptoms I see after plugging in USB devices:
Status bar appears as the device is being read/recognized and the status bar freezes. Other times the status bar moves quickly at first, then slows to a crawl. Sometimes the bar gets to the end and starts over in an endless loop.
Sometimes a message box appears stating that the USB device is damaged (which it is not) and asks if I want to repair the device. Clicking "Yes" does not fix anything.
On some occasions the device mounts, but when I try to copy files to the desktop the copy freezes and hangs and I have to unplug the device and quit the process.
Can someone please help.

Hi,
In addition to some group policy issue as Balaji Kundalam suggested, there should also be some permission problems.
We could run gpresult /r to check which policy that might have effect on this issue.
And for the permissions, we may take a look at the following thread:
External Hard Drive "is not accessible. Access is denied."
Best regards
Michael Shao
TechNet Community Support

Similar Messages

Dual-Boot; Restart and boot other o/s USB devices not working

I have issue with my msi z97-g43 mobo and Windows dual o/s PC.
Booting with win-8.1, USB devices working very well.Restaring windows 8.1 have NOT any issue.
After shutdown & start PC, choosing to boot windows 7 on bootmanager, USB devices not working in Win-7.
System no hang or occur any error/BSOD message.All startup programs run as normal.
I tried to re-plug usb devices but notting happens... Still not working
But after the win-8.1 shutdown, if i switch off PSU power button, watting ~1 munute for discharge.
After power up PC and boot with windows 7 all usb devices works normaly.
I checked all internal connections. 2 times disassembly all hardware and re-built system, nothing changed.All windows updates and latest drivers installed.
I'm sure other H/W is OK, but I thnik this mobo have a fault.

Thank you for reply.My PC system specs:
CPU:    Intel Pentium G3258 3.2ghz
Board:    MSI Z97-G43 /Bios: Ver. V17.7
MEM:    G.Skill Ripjaws 2x4gb DDR3-1600mhz cl9 1.5v F3-12800CL9-4GBRL
VGA:    Sapphire AMD Redeon HD6670
CASE:    Zalman z3 plus white (5x 120mm fan)
PSU:    Thermaltake Litepower 500w (12v1+12v2=36amp)
HDD-1:    Seagate 1TB ST1000DM003 /HDD-2: Seagate 2TB ST2000DM001
COOLER:    Akasa 92mm PWM Blue Led
OC:    CPU:Default /MEM: X.M.P mode=1600mhz 9-9-9-24-2t 1.5v
O/S:    Win7 x64 PRO + Win8.1 x64 PRO (Genuine)
All hdd's have MBR based partition table.Windows 7 & 8.1 installed in non-efi mode.In BIOS Boot sequence is setting up to non-efi Boot(system) drive as primary.
Before I suspect maybe have a short circuit to pcb or similar thing cause this issue.I take out all parts outside the chassis, and ran this system on the antistatic bag and box.Nothing has been changed.
I have Cooler Master Devastator(MB24 + MS2k) USB keyb+mouse set and tplink wn722n usb wireless dongle.
I have one more pc,based on AMD 970+SB950 chipset mainboard and AMD CPU.I exchange all parts to this amd mainbaord and tested for faulted hardware.All intel system H/W's is ok.All works great
Dual boot works perfectly.Not needs to switch off psu/power back and run system again.
I think msi z97-g43 mainbıoard have a problem.

I have an Ipod Touch, it appears inactive and says conect to Itunes. When I connect it to the PC, the PC says "USB device not working". How can do to solve this problem.

I have an Ipod Touch, it appears inactive and says "connect to Itunes". When I connect to the PC, the PC says "USB device not working". How could do to solve this problem?

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Iphone 4S will not charge, error that USB device not working, found any suggestions?

iphone 4S will not charge, error that USB device not working, found any suggestions?

Hello Chambless,
The troubleshooting steps below can help get your iPhone to charge.
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Cheers,
Allen

MACBOOK USB device not working in WIndows XP

My MACBOOK USB devices is working fine in leopard OS(10.5.1) but in windows XP professional the USB Devices is not working after I did dual boot.Please help how would I fix the problem.
Thanks
Mike

Please try the above procedure first as mentioned by SilentFlyer. If that does not work then highlight My Computer and Right Click on mouse. On the menu that pops up Choose Properties. Click on the Hardware tab and then Device Manager. Scroll all the way down to Universal Serial Bus Controllers. Click on the little plus sign to the left to open the sub-components. Does any one of them have a yellow exclamaation mark? That indicates that something is not functional. Please let us know what you see there.
Axel F.

MACBOOK USB Devices not working in Windows XP

My MACBOOK USB devices is working fine in leopard OS(10.5.1) but in windows XP professional the USB Devices is not working after I did dual boot.Please help how would I fix the problem.
Thanks
Mike

This forum is for troubleshooting the usage of OS X, not Boot Camp for Windows.
You'll want to repost your question in the Boot Camp discussions:
http://discussions.apple.com/category.jspa?categoryID=237

Usb devices not working after 2.6.38 kernel upgrade

Hello everyone,
today I've upgraded my aur system to the latest packages version , kernel 2.6.38-2 .
After the reboot the usb keyboard doesn't work at all , as the usb mouse, leaving me struck at the login screen .
If I try to modify kernel boot parameters in grub or in a live distro (sysrescd) the keyboard works flawlessy .
Any clue ?
thanks in advance

I just updated to 2.6.38.7-1. The USB devices that I have plugged in before booting work (e.g USB headset). If I try to insert a new USB device, it isn't recognized. Flash-disks and USB mice that worked under the last kernel aren't working at all.
Is there a command that lets you "turn on" a USB device, or force the kernel to recognize it? I tried messing around in /sys/bus, but even in the root shell, I got "invalid write" errors.
Interesting snippet from dmesg;
[ 19.399041] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 19.399447] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 19.412940] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 19.413381] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 151.340126] uhci_hcd 0000:00:1d.0: PCI INT A disabled
Here's where it finds my webcam;
[ 9.626704] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 10.381678] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input15
[ 10.381759] usbcore: registered new interface driver uvcvideo
.. and where it finds the mouse I had plugged in (you can see me disconnect it at entry 148);
[ 10.490045] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 11.201856] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input16
[ 11.202001] generic-usb 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 11.202017] usbcore: registered new interface driver usbhid
[ 11.202019] usbhid: USB HID core driver
[ 148.846756] usb 5-1: USB disconnect, address 2
When I try to reconnect the mouse, nothing happens. You can see that the kernel has this error repeatedly;
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
Edit: Found a temporary fix*.
# cd /sys/bus/usb/devices/
# for device in usb*; do echo "on" > $device/power/control; done
* I'm not responsible for what happens to your devices when you run this, but it worked for me. Check out: http://www.mjmwired.net/kernel/Document … gement.txt
Last edited by vkumar (2011-05-28 04:28:05)

USB devices not working after wake from sleep on WinXP!!! HELP PLEASE!

I would like to put my windows xp to sleep whenever I leave the macbook pro for fear of overheating too much when I'm not using it.
The only problem is that I can't use any more USB devices if I plug them in once I wake it from sleep.
Like my mouse for example, I'm using a laser mouse with a usb plugin but it doesn't respond once I try to use it after WinXP on wake....
Experiencing a ton of wake problems lately...
Sleep is important for a MBP....I hope...

Welcome to Windows. Some devices do not like to be put to sleep in Windows.
There could be driver updates or hot fixes from MS to fix these.
A very proven method (though not for battery life) is to instruct the devices not to go to sleep when the system goes to sleep. You can do this via the device manager in the control panel.
Its not a gracious solution but it will do what you want it to do.

All USB devices not working.

Installed Leopard (after a lot of problems). Finally "working", minus the small part all my USB ports, or anything i plug into them i should say, won't work. This includes keyboard and mouse, which makes working on that machine impossible.
Anyone have a clue as to what to do now?
The only clue i get, if it is at relevant is that my "tablet driver is not repsonding"... That could or could not be related...

As I recall, in another Leopard forum, the tablet driver must be removed and the new one installed.
There was a detailed description of how to do it on the Tablet support page.
I don't know what Tablet you are using, but yet, that is the reason your USB ports are not working.
Go to the URL for your Tablet and check support for how to remove the driver properly and install the new one.

USB Devices not working in Remote Desktop

Hi,
I have tried to use USB devices in Remote Desktop session. I did enable RemoteFX for USB devices and select Other supported RemoteFX USB devices before
establish connection; but, cannot find any device in Remote Desktop. Did I miss any configuration?
Regards,

Hi,
From your description, I understand you may experience 'USB device can’t be redirected on TS' issue. Please check the following aspects one by one and let know the result:
1)Please open Remote Desktop Connection, click Local Resource tab and More button, unfold device node. Please check if you choose all device letter.
2)Open Terminal Services Configuration, right-click RDP-tcp, choose properties. In Client settings, please check if disable device has been applied.
3)Please run Rsop.msc on Terminal server and see if Do not allow driver redirection has been configured under computer configurations\Administrative Template\Windows Component\Terminal server\Device and Resource redirection
For more information about how to use device in a remote desktop. Please refer to the following article.
How can I use my devices and resources in a Remote Desktop session?
http://windows.microsoft.com/en-us/windows7/how-can-i-use-my-devices-and-resources-in-a-remote-desktop-session
Configuring USB Device Redirection with Microsoft RemoteFX Step-by-Step Guide
http://technet.microsoft.com/en-us/library/ff817581(v=ws.10).aspx
Hope this helps,
Ada Liu

USB Devices not working on cold boot

On a cold boot, I get either my mouse (Microsoft Optical) or my modem (see signature) not switched on. If I reboot, or just re-plug them in, they switch on and Windows detects them. The modem is attached to a port on the mobo, and the mouse to a powered USB hub. The only other device powered at boot is a joypad (Thrustmaster Dual Power 2), which always works at boot. Devices switched off at boot are a printer/scanner, desktop light, and an extension lead for a thumb drive.
Does anyone have a solution to this?

Quote from: artur.aragao on 13-February-05, 11:59:04
Expensive friend,
Step for the same problems, where already I communicated diverse times with the support of the MSI not obtaining a definitive solution for this problem. It does not go to advance nor to make magic, therefore the problem has left of the plate-mother and not of the operational system. I have one mouse of the Microsoft who possesss led and when I give the departure in the PC the same does not light in the screen of informs of devices of the CMOS. It would have.
Then I am obliged to remove and to place mouse of the door usb so that mouse functions. The problem is that I have that to faer this almost all time that I bind the micron.
The bios beta that decided this problem palliative were 1.5B8.
I see that all the ones that pass for this problem are receiving the had respect, therefore this problem already is old and no solution was adopted until the moment for the manufacturer.
If my problem to continue, I will get rid myself of my plate and I will migrarei for another manufacturer who hears me and she respects me, therefore we make many times investment s in products that would not have to give as much migraine.
We buy TVs and DVDs and we do not pass for problems as these.
I was disappointed with the MSI in this part. It would go to acquire a VGA 6600GT, but today I think seriously about not buying more nothing of the MSI.
Still more for that it occurred with the 6800GT that were being sales and in the truth they were 6800NU.What it is this?
I advise to the friend who if not to decide its problem in at least 1 month, it speaks brazenly of its mainboard and it buys of another
manufacturer as the ABIT or same Gibagyte.
I have friends that they possess plates of the Gigabyte and are very happy.
Artur de Souza Aragão
HUH??? You did know this is an English languager board right? If not then please read the forum rules. Also note that hijacking someone else's post so you can complain is against the rules here as well.
This is entirely a user to user forum and as such MSI is not here nor do they read it. So yopur complaints whatever they may be as we can't entirely read your post is not getting to those folks that you want to complain at. Instead you are just making the rest of us upset for no visable reason. If you want to contact MSI to copmplain may I suggest a phone call. You may also want to call someone there that actually speaks the same language so there are no miscommunications as what is happening here.
Edit - his posts on this subject were all removed due to spamming the forum.

Network interface and usb device not working.

hi everyone,
I just installed Solaris 10 3/05 S10_74L2a x86
on my home pc.
My motherboard comes with an in-built ethernet port for networking.
But after installing the OS, I can't access to the Internet (I logged in as root).
Then I do an ifconfig -a command, I see only the loop interface, my ethernet port interface connected to my modem is missing.
I also try to plug in a USB flash drive into my USB port but I cannot see what is inside my USB flash drive.
I have done a devfsadm -v command for that added USB flash drive.
anyone knows what go wrong?
any help given will be greatly appreciated.
thank you.
good day :)
szehanz

But after installing the OS, I can't access to the
Internet (I logged in as root).
Then I do an ifconfig -a command, I see only the loop
interface, my ethernet port interface connected to my
modem is missing.Maybe your ethernet driver is loaded but not attached.
Check device name with prtconf and see if your device
is in /etc/drivers_aliases or not.
I also try to plug in a USB flash drive into my USB
port but I cannot see what is inside my USB flash
drive.I had the similar problem before. First, check USB
ports are "alive" (see ehci, uhci, ohci are correctly
loaded and attached). If it's ok, insert you USB flash
drive and restart vold with "pkill -HUP vold".

Ipod "usb device not recognised" on one computer but works with another!

I have a 60GB ipod video and a 2GB ipod nano. Both connect fine to itunes on my work laptop but will not connect to my home laptop. They have previously worked fine with the home laptop but now when conected the message "usb device not recognised one of the usb devices connected to the computrt has malfunctioned". I have tried reinstalling itunes several times and tried the usual reset of the ipods etc but nothing seems to work.

If you have more then one USB port, try the other port.

My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing called apple they did not know any help out there TX

My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing i did not install any software before this happend i called apple they did not know, any help out there TX

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

My pc keeps saying usb device not recenized iv tryed so i cant restore my ipod touch 3g it works with iphone4 iv tryed diffrent wires and still the same

my pc keeps saying usb device not recenized iv tryed so i cant restore my ipod touch 3g it works with iphone4 iv tryed diffrent wires and still the same plz help

Hello again Graham,sorry I spelt your name wrong on my last post ... Ok I went to the device manager and found a yellow mark. I went to it and selected re install driver. I then re booted my pc. I now have no yellow marks in the list but my pc still wont recognise my iphone.
Could I try anything else ?
Cheers Chris

AE 2220 - USB Devices Not Working

Similar Messages

Maybe you are looking for