AE 3.1 File :: Can't open!

I need to open a 3.1 version AE file. What versions of After Effects, that run on an Intel PowerMac, can open a 3.1 AE file?

You will have to go a long way back, at least to CS4. Could be that you may need to go even further, but then i guess you really have a problem because most of those versions won't run properly or not at all on contemporary operating systems anymore. if you know what the file contains and have a reference clip of the result it may be much easier to simply rebuild it in a modern way using a current version of AE. I really can't imagine what could be in a 3.1 file that couldn't be re-created, given how limited AE was back then compared to today...
Mylenium

Similar Messages

  • I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection.  Any ideas?

    I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection.  Any ideas?

    Many Thanks, Kurt.
    I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
    I shall save it somewhere VERY safe now in case this happens again …
    You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
    Best wishes
    OllyanDinah

  • Error maximum number of files already open error.No Other files can be opened or printed until some are closed

    Hi everyone,
    While opening a file in Adobe reader 10 in Windows 7,I am getting the error as
    "The maximum number of files are already open.No Other files can be opened or printed until some are closed."
    Can Anyone help or suggest a setting for this ?
    Thanks in Advance
    Omkar

    Hello omkar841987,
    Could you please let me know how many files have you opened simultaneously.
    This count will include files that are being displayed as well as opened (without being shown in the viewer).
    Using Reader, you cannot make any setting for the same, but close some of the files before crossing that limit.
    It also depends on your OS and memory size as you would need enough memory to open many files at a time.
    Regards,
    Anubha

  • I can't open PDF files, can't open, update, or download Adobe Reader ( I had it until recently) and don't have an "edit options"

    I can't open PDF files, can't open, update, or download Adobe Reader. (I had it until recently.) None of the "helps" seem to help. I can't even open Adobe Reader now.

    Ignore the instructions about "edit options", to install Adobe Reader download the installer from http://get.adobe.com/reader/ and run the installer. Alternatively, a direct link for the latest version of Adobe Reader is:
    http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3.4/enu/AdbeRdr934_en_US.exe
    The following article should help you set it up - [[opening PDF files within Firefox]].

  • We are using CSS 6 (not Cloud) for our yearbook. Starting today pages are giving message that we are missing a bunch of plug-ins so files can't open. How can I get these plugins? Why is this happening?

    We are using CSS 6 (not Cloud) for our yearbook. Starting today pages are giving message that we are missing a bunch of plug-ins so files can't open. How can I get these plugins? Why is this happening?

    We are using CSS 6 for our yearbook. Starting today pages are giving message that we are missing a bunch of plug-ins so files can't open. We are 2 weeks from printer deadline so thia has to get fixed fast. We didn't update anything with the program. We ca

  • Content generation error. Please confirm the file can be opened in InDesign?

    I have been trying to upload a couple of files to a folio that was built yesterday, everytime I try to upload one of them I recieve the error message "Content generation error.Failed to open the InDesign file. Please confirm the file can be opened in InDesign." I have no idea why this is happening as one of the files was successfully uploaded to the folio yesterday and I have not made any changes to it since. I have a also restarted and trashed InDesign preferences so there are no problems there. If anyone has any answers or has experienced any similar problems could you please let me know.
    Thanks
    Adam Flanagan

    That was the first thing I tried because obviously I wanted to find out if it was a problem with my file or a general issue with all uploads to that folio. It seems to be working ok now, although I still have no idea what the problem was and I have never seen that error message before :s
    Thanks for your response.
    Adam

  • What type of files can I open in Photoshop Touch?

    Can I open a PSD file that I created in Photoshop (on my desktop computer) in PS Touch (on my tablet)?

    Photoshop Touch can open files in the following formats:
    PSD (only from Creative Cloud)
    PSDX
    PNG
    JPG
    GIF
    And, with a free plug-in for Photoshop CS5, you can open the PSDX files created by Photoshop Touch in Photoshop.
    More information about using Photoshop Touch with Photoshop CS5.

  • 7d cr2 files can't open in lr2.5 acr 5.5?

    Anyone can give my advice on the lightroom setting? Preferences? I might have the wrong settings because I can't open the cr2 files from the 7d. As above, I do have the lr 2.5 and acr 5.5 but still cannot open!

    There is very preliminary (unofficial) support for full raw files from the 7D in LR 2.5. This means you can open full raw files in LR 2.5, but colors and other aspects of image quality may be off and definitely aren't finalized yet. This preliminary support does __not__ include S-RAW and M-RAW files, i.e., you cannot process them at all using 2.5. If you wish to process your 7D images in LR, I suggest shooting full raw files until final support in LR is available (i.e., a future update). The final support will of course allow you to open all three formats: full raw, S-RAW, and M-RAW.
    Eric

  • E-edition freezes up with 1A.pdf The max. number of files are already open no other files can be opened or printed until some are closed , showing four of five and computer froze any I must close by shutting down manually.

    My online E-Edition newspaper will freeze up after loading the front page and gives me the message that the max. number of files are already open and no other files can be printed or opened until some are closed. 1A.pdf. When you click ok it repeats itself and you have to force shutdown by holding off button. I'm totally stumped.

    I have read that "1000" is default maximum for Acrobat 4 or Acrobat 5 (I don't remmember it exactly anymore). Concerning my PC and RAM. I have a high-end graphical computer at my office; so I'm sure the RAM memory is not the reason.
    Anyway, thanks for answer.

  • My ind file can not open

    i worked on the file yesterday and saved it but today The file won't open neither is there a record of me having updated the file yesterday. My assignment is due Monday, Can anyone help, I have tried different pc, and Mac to no success

    It's most likely damaged. USB thumb drives are not recommended for direct saving -- you should copy to the local hard drive, do your work, and copy back. If you pull the drive before the save is completed the file is toast.
    Try opening the file in a plain text editor like Notepad or TextEdit and paste the first few lines (which will look like gibberish) here.

  • Capivate 7 open file - can't open notepad or Ms Word help.............

    Please help  i can't open file or application such as notepad I am using Captivate 7

    Hi Lilybiri
    I am trying to link and open application using text captions function   eg: assessment in a MS word Document 
    text Caption hyperlink 
    Under Hyperlink dialog " Link to: Open File.
    C:\Users\ntan\Documents\My Adobe Captivate Projects\assessment_info (9681).docx
    Note: Worked fine under preview mode , by once publish linked are broken
    Publish error
    Error as follow:
    File not found
    Firefox can't find the file at
    \Users\ntan\Documents\My Adobe Captivate Projects\assessment_info (9681).doc
        Check the file name for capitalization or other typing errors.
        Check to see if the file was moved, renamed or deleted.
    your help would be much appreciated.
    Thank in advance

  • The file can't open due to error.

    This message can appear if a file has been saved with permissions. Permissions, also known as rights or privileges, can be applied to a file, folder, or almost any resource available from a network (printers, shares, files, databases, Web sites, etc). When
    a user attempts to open a resource that requires specific user permissions, this message will appear if the user does not have the required permissions.
    Permissions can be set for individual users, groups of users, or for a specific computer. Usually, this message appears if you are using a network to which administrators have applied permissions for specific users and groups, or if you are accessing a resource
    local to a specific user's computer, but are blocked because of local permissions that have been set by that user. If you cannot open a resource on a file server or other computer on your network, you will most likely need to review your user account settings
    to determine whether you have the necessary permissions to gain access to the resource. If you do not know whether you have the necessary permissions, contact your network administrator or the owner of the computer with the shared resources.
    Usually, this message does not appear if you are using disk drives formatted with a FAT or FAT32 file system. Drives formatted with NTFS, HPFS, or another file format that provides the ability to apply permissions, are capable of forcing this message.
    Occasionally, the computer that grants users access to a network can lose the information that is used to authenticate a specific user. When this happens, the only option available is to turn your computer off for thirty seconds, and then restart your computer
    (you must turn off the computer to clear the cached information in the network card). Restarting may reset the authentication information that is used to grant you access to the network. If this does not work, you must contact the network administrator to
    have your account reset. It is also possible that the network administrator has disabled your account.
    There is also the possibility that the file you are attempting to open is restricted through Information Rights Management (IRM). IRM is an alternate form of file restriction access that allows creators of a file the ability to limit editing, copying, printing,
    or forwarding of content. If the file is restricted and you require access to its contents, you must contact the creator or owner of the file to request that they add your user ID to the list of users who are allowed to access the file.
    Md. Ramin Hossain

    Hi,
    Thanks for your sharing, hope this article is helpful with others who had similar problem.
    Roger Lu
    TechNet Community Support

  • Photoshop CS5: how many files can be opened at once?

    I've just tried to open about 400 jpg's in Photoshop CS5, as I needed to crop them to the best ratio for display on my iPod Touch, and I got an error message saying I'd tried to open too many images at once, and it stopped at about 200.
    My system is a Win7 Pro 64Bit, 3.4GHz i7 machine, with 16GB RAM, and I thought actions like this were driven by the amount of system resource available, but Photoshop seems to have an internal limit, regardless of the resources.
    Has anyone else come across this apparent limit, and is there a way 'round it?
    Thanks
    Paul

    In that case if a center crop will do you can download my crafting actions package. It contains a plug-in script that I wrote based on Adobe plug-in script Fit Image its name is AspectRatioSelection you can record using it in an action set its dialog to have it set a new selection that is a rectangle with a aspect ratio 3 2 that is centered and not feathered.  This script will select a 3;2 center selection for lanscape images and a 2:3 selection for Portrait images.  When the action is played the diaqlog will not show for the plug-in will record the settings you used when you recorded the action into the actions step.  These setting will be passed to the script when the action is played and the script will not display its dialog unless you turn on the dialog in the action step.  Once this setp is recorded follow it with a Image Crop step.  Once you have recorded this two setp action you can run the Image processor set its dialog to run this action and heve it save and resize the crop to fit 1920x1920 or you could include a Fit Image step in the action after the Image crop step and set the Fit Image dialog  width and height to 1920. You will find Fit image and AspectRatioSelection under menu File>Automate>...... You will also find Imahe Processor Pro there if you download it from Russell Browns web site.
    If a center crop will not do for you add an additional step to the action to make it interactive by adding an interactive transform selection after the aspectratioselection step.  The step need to be recorded with a 180 degree rotation and  have its dialog turned on and you will need to hold the shift or shift+alt keys down and use a cornor point as you transform the 3:2 selection to constrain the selection to have the same 3:2 aspect ratio.
    Crafting Actions Package Contains
    Action Actions Palette Tips.txt
    Action Creation Guidelines.txt
    Action Dealing with Image Size.txt
    Action Enhanced via Scripted Photoshop Functions.txt
    CraftedActions.atn Sample Action set includes an example Watermarking action
    Sample Actions.txt Photoshop CraftedActions set saved as a text file.
    12 Scripts for actions
    Download

  • Help! Tampered with files-can't open photos in iPhoto any longer

    I was doing some stuff with my Photo folders in the Finder, accidentaly deleted some and even after dragging them out of the trash I can't view my photos in the iPhoto anymore. What do I do? All the pictures are still in the Finder folders but iPhoto says its library is empty and it won't import any pictures from Finder. How do I restore them? Please Help!!

    Hi grimus,
    See if creating a new library will help get your photos back into iPhoto.
    Close iPhoto
    Rename your messed up iPhoto Library to "iPhoto Library_old"
    Drag this library to your desktop
    Hold down the Option key and launch iPhoto
    This is the window you will get
    Create a new library or choose a library to open
    Choose to create a new library
    Once this new empty library is open it is time to import the images from your old library
    Go to File>add to library
    Navigate to the old library on your desktop and highlight it in the window, then click the "open" button.
    iPhoto will start importing the images from your old library
    This is what to expect:
    Your images will be imported in nice dated rolls. (make sure your view is set to sort by rolls to see it) There are a couple of caveats to this. You will get rolls named "Originals" These rolls will contain your video clips and your original images that you had edited. If you had RAW files they would be in those rolls too (I don't do RAW, so I don't know for sure) Delete what you don't want from those rolls. You will also get the jpeg pointer files to your video clips imported. They will just be jpegs and will not point to the video clips anymore as iPhoto made new ones when the clips were imported again. You can delete those. they should be in a roll right next to the newly imported video clips so they are not hard to find. The thumbnail files don't get imported as iPhoto makes new ones when the images are imported.
    Once all you images have been imported, check through the library and make sure everything looks ok.
    You can now start making your Albums, and do your keywords or any other organizational steps.
    You can also delete the old library on the desktop.
    It is also a good time to backup this new library to CD/DVD by burning the iPhoto LIbrary folder in the Finder, or copying the iPhoto Library folder to an external drive formatted for Macs, or copying the iPhoto LIbrary folder to an iPod.
    Good luck!

  • NEF files - can't open in Bridge or PS CS3 but can see in camera

    Not sure if I'm in the right forum...first time here.
    I'm shooting the floods in Brisbane, Australia today and have been shooting with a Nikon D200 and with a Nikon D3.
    I have transferred the NEF files from the D200 easily (as I normally do) to Bridge, but am suddenly having problems with transferring the NEF files shot on the D3. They appear as files in Bridge but if I try to open them in PS, the error message is "Could not complete your request because it is not the right kind of document".
    I was successfully shooting on the D3 and using the same card less than a week ago. The only difference is that I was transferring to a different desktop, not my laptop, which I have now. I've recently rebuilt my laptop after a major crash, so maybe there's some simple setting I need to change.  But, it's odd that I can successfully transfer and open today's NEF files shot on the D200.
    Any help/tips would be great!
    Cheers
    Marc 

    Great, thanks Ian.  This worked a treat. I'd forgotten that I needed to download that again.  Cheers. Thanks for your help. Marc.

  • DPX files can be opened in 1.0.2 but not in 1.0.4

    I have about 4000 DPX files that I can open on my copy of Color 1.0.2 at home, but not on my copy of Color 1.0.4 at work. They were exported from Cineform NeoHD on windows.
    Shake also seems to reject them, but After Effects has no problem with them.
    Any thoughts?

    Can you read the header in the home COLOR version and then what does the work COLOR report when you attempt to navigate to them directly in the Setup Shots?
    jPo

Maybe you are looking for