AE and Computer- Audio dropping out and stuttering issues

Hi all,
I recently bought an Airport Express 2 weeks ago. I hooked the unit up in my bedroom via ethernet(roaming) method.  I use Airplay and turn on Computer and Airport Express to play both in my living room and my bedroom at the same time. Problem is I'm noticing my iTunes in my living room exhibits some stuttering during songs or the audio will start to drop out intermittently and sometimes shuts off completely but the Airport Express is still playing in my bedroom without issue. I've tried turing off the wireless but it doesn't do anything. When I turn off AE in Airplay and just play using the Computer it works fine. I'm not sure what can be causing the interference but it seems its between my computer and AE when they are both turned on.  I would appreciate any suggestions forum members have to help me resolve this issue. I have the 2nd generation AE.  Thanks a lot.
Macthemini

Hi Macthemini,
Thanks for using the Apple Support Communities. It sounds like you are experiencing issues with AirPlay between iTunes on a Mac mini and your AirPort Express. The following resource outlines troubleshooting issues for AirPlay performance:
iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
http://support.apple.com/en-us/HT203822
Troubleshooting performance issues
Wi-Fi Connection
If you are experiencing intermittent playback or significant network lag with AirPlay, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your AirPlay-enabled device.
Ensure that other devices aren't trying to stream to the same Apple TV at the same time.
Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
- Matt M.

Similar Messages

  • Audio drop outs and continuing problems- Apple Support informed again.

    Hi All,
    Have had various audio problems with iMovie transfer to iDVD 6. iMovie had the problems initially but a weird trick seems to be helping me.
    Copy a random new audio track into my film, paste it, then cut it out then empty trash..... all of a sudden my audio is clean again and perfectly in time with the video. I have informed the iMovies people in Ireland and they are at a loss to explain why this is now ok.
    BACK to the plot and iDVD 6.
    When I try to export this project from iMovie in iDVD 6 it either becomes an audio garbled nightmare or if I try and import into iDVD 6 I get audio that gradually becomes out of sync with the video visual. I know that this project was recorded in 16 bit audio so no joy there.
    I've told Apple in Ireland that there are major audio issues with iDVD 6's audio set up + something they were apparently unaware of. I was assured that the tech dept's would investigate and solve. I am really surprised that they hadn't seen this problem in this forum!!
    In the meantime any advice is very gratefully received. I'm on an Intel G5 Imac with 1.83ghz 1Gb sdram and 250 GB HD. So Software is currently limited!! I desperately need to get this project to DVD!!!!
    Many thanks,
    GUY

    SAME EXACT THING HERE. This is what I posted in a diff thread:
    2013 iMac 1TB Flash Drive
    OS 10.8.5
    Constant audio drop outs using Apogee Duet. I have to unplug and replug several times to get the system to recognize it. Sometimes when it is connected, Audio Prefs doesn't even recognize it and it shows up as "Unknown". When I click Audio Prefs before I get in, I get the spinning beachball and it takes a while for it to open. I have been in touch with Apogee but to no avail. It seems to work on my 2013 Macbook Pro, but I haven't tested extensively. It seems to get tripped up if I'm working in Ableton and get a Facetime call or if I try to use Youtube / Soundcloud. The system gets noticebly slower. When I switch back to Ableton, Duet is recognized (sometimes not recognized at all) but I cannot play anything inside the project window.
    Not sure what to do at this point

  • Usb audio drop-out and problems on 2010 Mac Mini

    Hello!  I recently purchased an Apogee Symphony USB audio interface for my Mac mini.  I have been trying for over a month to get it fully functional without having any dropouts.  The interface runs fine for about 15-20 minutes before I hear static (using my DAW, using iTunes, streaming movies on Netflix, etc).  Sometimes the DAW (reaper to be specific) can't play back because the computer lost the connection to the USB Audio interface.  I know this because I launch Audio Midi setup and it does not recognize the Apogee Symphony interface.  I restart the interface and it works fine.  There is intermittent loss at times, inconsistent latency, etc.  I have worked with Apogee support and we've tried everything - newest drivers, firmware update, etc.  I used to run Snow Leopard 10.6.8 and had the same issues; I upgraded to 10.7.5 but had major kernel panics due to the display (or something, couldn't quite figure it out) but I reverted to 10.7.4 and everything runs smoothly... except the audio interface.
    This led me to doing some research online and I think the problem is with USB audio dropouts.  I've tried disabling Bluetooth, Airport, not putting my HD to sleep, etc and still has the same issues.  I've tried two different USB ports:  the one closest to the display and the the one next-to-last. 
    My question is:  what causes the USB audio dropouts and is there a fix for it??

    This happened a bunch of times; I only copied the main gist of the error message:
    Jun  1 19:01:31 Franks-Mac-mini com.SymphonyIOUSBDaemon.plist[63]: kIOReturnNotResponding
    Jun  1 19:01:31 Franks-Mac-mini com.SymphonyIOUSBDaemon.plist[63]: System          : 0x38
    Jun  1 19:01:31 Franks-Mac-mini com.SymphonyIOUSBDaemon.plist[63]: Sub          : 0x0
    Jun  1 19:01:31 Franks-Mac-mini com.SymphonyIOUSBDaemon.plist[63]: Code          : 0x2ed
    Jun  1 19:01:31 Franks-Mac-mini com.SymphonyIOUSBDaemon.plist[63]: sys_iokit error
    Jun  1 19:01:31 Franks-Mac-mini com.SymphonyIOUSBDaemon.plist[63]: sub_iokit_common
    Jun  1 19:01:31 Franks-Mac-mini com.SymphonyIOUSBDaemon.plist[63]: kIOReturnNotResponding
    Jun  1 19:01:31 Franks-Mac-mini com.SymphonyIOUSBDaemon.plist[63]: System          : 0x38
    Jun  1 19:01:31 Franks-Mac-mini com.SymphonyIOUSBDaemon.plist[63]: Sub          : 0x0
    Jun  1 19:01:31 Franks-Mac-mini com.SymphonyIOUSBDaemon.plist[63]: Code          : 0x2ed
    Jun  1 19:01:31 Franks-Mac-mini com.SymphonyIOUSBDaemon.plist[63]: sys_iokit error
    Jun  1 19:01:31 Franks-Mac-mini com.SymphonyIOUSBDaemon.plist[63]: sub_iokit_common
    Jun  1 19:01:31 Franks-Mac-mini com.SymphonyIOUSBDaemon.plist[63]: kIOReturnNotResponding
    Jun  1 19:01:31 Franks-Mac-mini com.SymphonyIOUSBDaemon.plist[63]: System          : 0x38
    Jun  1 19:01:31 Franks-Mac-mini com.SymphonyIOUSBDaemon.plist[63]: *** process 63 exceeded 500 log message per second limit  -  remaining messages this second discarded ***

  • Error Code EF01, Video and Digital Audio Dropping out

    To whom it concerns,
    A customer of mine is having problems with his Fios DVR.  He will be watching TV through his Integra DTR 40.3 receiver, connected via HDMI cable and his picture and audio will just stop.  This is always accompanied by a code that displays on the front panel of the DVR which reads EF01.  The customer is usually able to restore picture and audio by performing a power cycle on both the AV receiver and the Fios Box. 
    There have been numerous occasions of this problem occurring.  Sometimes it happens quite frequently, (once every 10 min) other times much more infrequently.  Also the problems vary in their severety.  Sometimes just the digital audio will drop out but the pitcure will remain. Other times the picture and audio will go out and they will damage the HDMi input that the Fios box is connected to, rendering it unusable.  We have since repaired the Integra recevier twice.  This last repair we haven't had an incident for 3 months, now we are back to losine Audio and Video. 
    The customer initially had the Fios DVR replaced, but as the incidents kept happening, we tried repairing and replacing the AV receiver.  I keep coming back to that error code because I don't know what it means and nobody can explain to me if it has any significance or bearing on the problems we are having. 
    Does anybody know what the EF01 error code indicates on the Fios DVR?  Has anyone had problems similar to the one I am describing, regarding HDMI video/audio loss?
    Thanks,
    Kelly White

    Hey, Jared  here.
    The EF01 error code means that either the CableCard inside the box isn't getting any signal, or the CableCard isn't sending out any signal. A really efficiant way to see exactly what they problem is, is to take the box to a another location where Fios tv works fine. 
    There are two possible outcomes:
    Either the box doesn't work, and is still displaying the EF01 error code. Than the issue is with that box, and I must be replaced. 
    The other possibility is that the box works fine. The error code goes away, and the box works perfect. If this is the case, we know it is the coax wires coming from ONT (Optical Network Terminal). And a Service Technician is required to come out and address the issue. 

  • Audio drop out and picture wobble during export to tape

    I use a camera to capture footage from DV tapes - it's its only job and is always connected to the Mac.
    But when playing back the footage from the FCP 4.5 timeline to make a back up DV copy of a finished job it all goes awry.
    The audio cuts in and out - from normal audio to silence and back again at no regular intervals but every few seconds.
    The picture wobbles just as though the camera isn't getting enough power (it is connected to the mains)I watch the playback with the camera's flip out screen.
    On the computer it all looks fine. Playing back the DV tape shows me what I saw on the flip out screen - a wobbly picture with intermittent sound.
    The cables are good. The camera works fine in all other respects, the external firewire drives work fine, the computer is good.
    I'm stumped! I can't export to tape any more...
    But exporting the files via compressor to make DVDs is fine - no problems.

    Playing back the DV tape shows me what I saw on the flip out screen - a wobbly picture with intermittent sound.
    The cables are good. The camera works fine in all other respects, the external firewire drives work fine, the computer is good.
    Not quite sure how you reach your conclusion in the second paragraph. If it displays fine on the computer and is TOTAL JUNK after it heads out the firewire cable - I'd start with every piece of equipment that connects to the computer. Time to do A/B testing. find another camera, A-DV converter, firewire cables, even the computer and test each element.
    good luck.
    x

  • Static and audio drops out

    I am not sure if I am in the right Discussion area. If not, please advise where to post. After having work done (new mother board and power supply) on my iMac I heard a static or scratchy noise in the lower right side behind my screen while listening to iTunes the week after I got the machine back. Some songs(with more treble) were worse than others. My parents and I iChat every Sunday. The static now interferes with our iChats and the audio drops out and then will come back. They hear it more on their end than I do on mine. I tried turning the speakers way over to the left and that did help some when listening to iTunes, hulu but, not the iChat problem. My question is - do you suppose it is my speakers rather than another issue such as bandwidth or setting elsewhere? And if I were to buy external speakers would those then just amplify the existing issue? The computer on the other end is an iMac running snow leopard. Could it be that the microphone wasn't put back in correctly during my last repair?

    Hi paperchase
    That kind of sounds like the right internal speaker is bad or loose and the Internal Mic is picking up on the noise from it.
    One thing to try before committing to a 2.0 or 2.1 External Speaker System, is to test the iMac's external output sound with iPod buds or a set of headphones. That at least will give you a better idea if the problem is with the right internal speaker or something worse like the sound card.
    Likewise if the repair work was recent, then perhaps you should contact the service provider and report that it came back with an intermittent or rattling right speaker.
    Dennis

  • Video playback slow and audio drop out after render

    Hi
    I have downloaded a trial version of After Effects from the cc,
    Problem is everytime I render ou,t the video playback is slow and the audio drops out
    This happens with AVI or Quicktime files.
    Using a Intel i5 quad core, 8 gig of ram 250 gig ssd.laptop
    Render/export in Premire pro is fine.
    Can any one help.
    Regards Phil Green
    Blue Room Media.

    It sounds like you might be hitting the space bar in hopes of getting real time playback.  Sorry, but AE doesn't work like that, because it does totally different things from an editing application like Premiere.
    And if you've downloaded the tryout version, you really ought to learn how AE works... and a short description is "it doesn't work intuitively".  You can frustrate yourself in a hurry.
    But this can really help;
    Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC) | After Effects region of interest

  • ITunes scratchy he||...with audio drop outs

    I use iTunes v7.4.2 all the time to play music. Only lately my iTunes has been sounding very intermittently scratchy (static-y) and the audio drops out (without the diamond moving) at unexpected intervals (anywhere from 10 sec to several minutes). When I try to hit the volume buttons, I don't get any feedback sounds like usual. Waiting it out seems to be the only remedy...then it comes back again, and again...
    I use MenuMeters to monitor my CPU and bandwidth speed and so I notice that this happens most when I am downloading torrents. Very frustrating! Curiously, I tried running a bootable clone of my system on a separate drive and I found that the problem went away (I'd have to run it for longer to be sure though). Could this be a sign of imminent hard drive failure?
    Has anyone else experienced these issues? Does it sound like a hardware or software issue?
    Thanks for any replies,
    -Bill
    Message was edited by: BillytheKidney

    I am going to keep researching this issue for you.
    Be AWESOME Everyday!
    Donate KUDOS and Click "Accepted Solution"
    Did someone help you today?
    Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"
    This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

  • Problem : Audio drops out on multicast

    We are using Quicktime to view multicasted feeds. We read in the SDP file, Quicktime goes off, does the connect...all is well..until you try and fast forward to get rid of the latency (customer wants < 100 ms, which Quicktime can do fine). If you get to the end of the buffering, video still works fine, but audio drops out and does not come back. There is also some audio pops while the fastforward occurs. This behaviour is the same on both the standard player and the wrapped version.
    Have not seen anything in COM interface that can let me see how much buffering is left, otherwise I could simple keep poking fastforward until I have minimal buffer left.
    Here is the SDP file we are using
    v=0
    o=- 1 1 IN IP4 127.0.0.1
    s=RTP session
    e=NONE
    c=IN IP4 239.1.1.8/3
    b=RR:0
    t=0 0
    m=video 49170 RTP/AVP 96
    a=rtpmap:96 MP4V-ES/90000
    a=fmtp:96 profile-level-id=245; config=000001b0f5000001b509000001000000012000c48dc0004138c00cc000c20097530c1f4c 2c1078510f000001b2656d347620342e332e322e3400c5ff
    a=control:video
    m=audio 49172 RTP/AVP 97
    a=rtpmap:97 mpeg4-generic/90000/2
    a=fmtp:97 streamType=5;profile-level-id=22;mode=AAC-hbr;sizelength=13;indexlength=3;index deltalength=3;config=1190
    a=control:audio

    There are only two possible causes I can think of:
    1. The fiel your'e using out of FCP is bad.
    2. The encode that DVDSP created is bad.
    > After exporting to DVD using compressor, the audio on the DVD completely goes away 49 seconds in.  It's there on the master in FCP, but not on the DVD.  It goes away in simulator too.  <
    How did you export out of FCP? I always use a self-contained movie. If the movie includes the audio, there's a problem in DVDSP.
    If you are exporting to MPEG2 out of FCP, you must figure out a way to check the audio portion of the file.
    If it goes away in Simulator there's an issue happening right at that point. Does it play in the DVDSP timeline? Does it play in the media viewer of DVDSP? Can you open the exported movie in QT Player?
    Is there anything significant about the 49 second location?
    bogiesan

  • Help me!:audio keeps dropping out and coming back in while importing clips

    While importing from my camera (brand new Canon Xl-2) to imovie, the audio from the tape keeps dropping out and coming back in for some reason.This happens with all my tapes. I've tried using a head cleaner and that didn't help. I'm using a Maxtor external hard drive to save the project on. The project itself is kind of big (about 80 GB) Can imovie support projects that large? Could this be a problem with my processor?
    I'm just frustrated beyond belief right now. Any help you can give would be greatly appreciated. Thanks!
    these our my specs: Processor: 800 mhz. Memory: 1GB SDRam. The disk space icon at the bottom of imovie says i have 151 GB of disk space left.
    powermac g4   Mac OS X (10.4.5)  

    Hi e
    With a slow computer one has to minimize the hassle.
    I would
    - repair permissions
    - cheque that nothing else is taking resourses from the job (energy saver,
    screensaver, File Vault etc.)
    - I would move material to my ext hd so that I got > 80Gb free (for a 80Gb
    project)
    - nothing else connected than my Mac + Camera and import.
    Yours Bengt W

  • Eeek! Timeline audio keeps dropping out and I'm on a deadline!

    I'm REALLY hoping someone has experience with this issue. I search the forums, and was unable to find anything quite like what I've got.
    I've got a 25 minute project in a FCP X timeline. For the most part, it's a simple string-out of ProRes 422 video with AAC audio.
    While playing, the audio drops out at random times for random lengths of time (usually around 1 to 8 seconds).  The dropouts do not occur in the same place with any sort of consistency. It happens every few second, and it's making editing impossible.
    FCP X is the only running app, and I've killed all the obvious background processes. Rebooting doesn't help either.  I've watched Apple's activity monitor and seen no spikes in CPU or disk usage during the silences.  Based on other audio issues I've read about, I tried coping all the content into a new timeline. That didn't help.
    I'm running out of ideas, and more importantly, out of time.  Can anyone suggest a fix?
    Thank you in advance!

    Holy crap!  The media is AAC.  How did I miss that?!  I even typed it!!!  I think I must have confused it with AIC (which isn't even an audio codec).  Good lord.
    Ok... I'm recompressing some of the footage right now -- just to make sure that's the culprit, which it likely is. I'll report back shortly.
    Thank you, Tom!

  • Audio (and some video) dropping out export

    I've created an project with short video/audio clips sampled to produce "music". It plays OK in FCPX, but when I export it (H.264, 720p, Apple Devices, 44.1) as an MP4, some of the audio (and some video) drops out. That is, it does not show up in the exported (aka "Shared") movie file.
    There are about 7-8 things (tracks) going on at once, maximum.
    Any ideas what to do to fix this?
    Thanks!

    Hi juicespeare1,
    Welcome to the Sony Community!
    Upon checking your inquiry, the best division to respond to your concern is our Sony Mobile department.
    You can reach them at this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/.
    If my post answers your question, please mark it as "Accept as Solution"

  • Audio drop out in Encore AND Premiere

    Strange problem. I am trying to burn a dvd with Encore. All the files play fine in QT, all the audio is there. once in Encore, it randomly picks clips to not play audio AT ALL. Sometimes it will play part of a clip then drop out audio. I have re installed and tried several tricks, like bringing files into Premiere Pro to render out a different file type. Now my premiere wont play the audio randomly either and the file produced has no audio! all other audio/video apps running fine. Not sure if its a Adobe Production Studio problem or a glitch in my system, thou as I said, rest of system works fine.
    Any suggestions would be greatly appreciated!!
    Steve

    Well, thanks for reply but I got it to work after several work arounds, thou my Adobe products still seem to be working strange(Not opening as I closed them, etc.)
    So, foe giggles, here was what I was working with.
    I digitized some footage from a digibeta into my Avid where I exported Quick Time reference files to be used in After Effects.
    In After Effects I exported Quick Time Movies with Blackmagic codec,8bit, with 4800k audio, uncompresed. All where NTSC 29.97. Files play in Quick Time/Windows media player no prob.
    Installed Blackmagic codec on my home system for the final build with Encore2.0 DVD and thats when all the fun started. Encore would play files fine but then start to randomly drop out audio at burn.
    To solve this I pulled QT's into Premiere Pro2.0 and exported WAV files to swap out for in Encore. This almost worked until Premiere started to mimic the Encore problems with random audio drop out.
    After several retarts of the programs ( they would both have ASIO driver problems and quit audio. I replaced my driver, still same problem. whew!)I got the files all rendered.
    Wow, still with me? Thanks! so long story I finally got the QT re rendered in Premiere to DV files that worked fine in Encore.Still think I have a system bug or somethig due to the fact these programs and Photoshop too are acting "wonky", crashing out or locking up, etc.
    Thanks for the intrest!! any suggestions on system checks would be great!
    Steve

  • ITouch and Pandora app....audio drop outs

    Anybody having audio drop outs when using Pandora? It used to work flawlessly on my home network...nothing changed except maybe the update from Pandora in Aug? Anyway- tried the Pandora app on my Apple network at work...no problem. Is it my home network?...My network is secure...I have a cable modem and Time capsule wireless router. What is REALLY perplexing is that AOL radio app. streams fine to my iTouch.
    Please anybody have a solution or similar problem with a fix for this? This was/is the best app for the iTouch and a speaker dock! So frustrating.
    Tried reinstalling the app.....no luck
    ...all updates are current.
    any thoughts?
    Thanks-
    Steve

    I saw that post...but I'm not sure it applies to my situation. It doesn't seem to be connected to when my screen is locked or not. As I stated, It works without a hitch at my work but at home it has the dropouts. I would normally think...well it HAS to be my connection or speed or traffic at home BUT Pandora used to work flawlessly...it probably started having the drops after the update. Maybe the locked screen bug has something to do with my problem but I'm not sure. Why would it work at my work w/ an apple router and NOT at home with an apple router?...just plain weird...
    I get buffering with LastFM if that is any clue for you? I don't get any buffering with the AOl radio app.
    As a note I get no issues when I listen to my Pandora on my desktop both wirelessly and wired....so it HAS to be an iTouch/Pandora issue. I hope you are right that the update will fix my problem.
    Thanks

  • Broadband Dropping Out and Connection Speed Decrea...

    Sorry to be a pain but I am back here again.
    Since the last issue with speed, connection drop out and noisey line which required an underground cable to be partly replaced, all has been fantastic and no problem to report. Many thanks to those who were involved in helping with getting that issue resolved.
    About 10 days ago the broadband started to drop out at random times but not too often. The broadband hub light would go out for about 15 seconds before returning. My connection would automatically resume and no great problem. It has since become more of a problem and pain.
    The frequency of drop out increased with a sort of pattern. Last week an example would be drop out at 11:50 am, again at 12:40 and once more at 1:30 pm. Each time the connection returned my computer icon for wifi would be a warning triangle. I clicked on the icon and would get a message 'limited connection'. The only way I could connect again would be to click the icon and select to disconnect and then connect, making sure a 'tick' was in the box for autoconnection. A bit more of a pain than before but usable. It got more of a problem over the next few days.
    The frequency of drop out increased. This became a right pain when trying to purchase things online as I could not be sure in the purchase had been completed or if I tried again would I get two lots? Upon broadband connection returning I would not be able to 'auto connect' but would get the warning triangle of 'limited connection'. I tried the click to disconnect and reconnect but it failed to work. I ended up shutting down the laptop, waiting before powering up. This failed to work as all I would get is the warning triangle and 'limited connection'. The only way I could reconnect was to press the 'restart' button. This worked but it got worse.
    The next day the broadband connection would drop out every couple of hours. It got to the point that even pressing the 'restart' button would not allow me to connect. I tried three times and gave up. I had to resort to pressing the very small 'reset' button on the back. This cured the problem for about 12 hours before the drop outs started again.
    It is now a case of 50/50 if I can connect to the broadband again after a drop out. It is getting quite frustrating. I only used the small 'reset' as a last resort. I have noticed that the speed of the connection has started to drop down also.
    Each time the hub drops broadband and I can auto connect and do not press any hub button, the timer has reset to zero days and zero hours. I know it takes about a week for the connection to settle. I do wonder if these drop outs are messing the connection settings for my line speed? The line used to be rated at 21 Mbps but has decreased to 17 Mbps, my actual connection used to be 19 Mbps but struggles to reach 14 Mbps. It is slowly dropping with each and every drop out.
    I also looked at the event log in the hub. Just before each broadband drop out I see a external connection is made with the initials 'CWMP' followed by 'event code 1 boot' or 'event code 6 connection request' or 'event code 4 value change'. Straight after the broadband connection drops out with out fail.
    All I can seem to find out is that the external connection is either the hub connecting to the server or vice versa? As for the codes? I have no idea at all.
    I only ever resort to pressing 'restart' if I cannot connect to my hub. I have only pressed the 'reset' as a last resort as nothing else worked to allow me to reconnect.
    Can anyone offer any help or best a permanent fix?

    I connected to the test socket and used a wired connection for the speed test and hub stats.
    The hub position and run of cables are the same as when the last engineer advised as the best set up.
    Since my last post I have checked the event log and 'CWMP' has made at least two remote connections but the hub did not drop broadband connection. The broadband has been stable but just slower than usual, as you stated due to the drop outs/disconnections.
    I guess a case of wait and monitor to see if the problem has resolved itself?
    Will the speed automatically return to the usual 18 to 19 Mbps? or will something else have to be done to reset it at the exchange/server?
    Here are the hub stats from this morning.
    Connection Information
    Line state:
    Connectedppp0_0
    Connection time:
    2 days, 00:23:43
    Downstream:
    16.69 Mbps
    Upstream:
    1.024 Mbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    9.5 dB / 7.1 dB
    Line attenuation (Down/Up):
    10.3 dB / 6.7 dB
    Output power (Down/Up):
    19.8 dBm / 12.4 dBm
    FEC Events (Down/Up):
    4947 / 0
    CRC Events (Down/Up):
    11 / 11
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    377 / 48
    Error Seconds (Local/Remote):
    72 / 21

Maybe you are looking for