AE and my G4 (running OS 9.0.4) via ethernet

I have a newer G4 laptop and my husbands PC are working fine with the Airport Express. My understanding is that I can use ethernet cables to plug my older desktop (G4 which running OS 9.0.4) into the AE for internet connection. Can anyone walk me through how to do this?
I have the ethernet cable plugged into both the desktop and the AE. Now what? I suppose I need to reconfigure my TCP/IP address?
Thanks.

jacquisf, Welcome to the discussion area!
On your older desktop, open the TCP/IP control panel. Configure it to use Ethernet and DHCP to get an IP address. That should be all you need.

Similar Messages

  • Gaming issues and heat issues, running windows 8.1 pro via bootcamp

    I have a few problems, and I don't know what else to do, then to write for help here..
    I really hope someone out there can help me, because I have had this problem since I bought my laptop mid 2012, and I got smarter since then, so now I know that I actually shouldn't have these problems, it's not because my very expensive laptop is bad, or that it is a laptop or because it's a mac, regardless of what people say, I'm positively certain that it's a problem which shouldn't be there.
    I have pretty great specs, (trust me i checked them out, not the best in the world, but pretty good) yet I can't enjoy 1 single mmorpg game like, Tera, or the new Archeage (currently in open beta), or any other game, (swordsman online)... Even though people say Tera has bad coding, I have tried adjusting things for weeks if not months, NOTHING helps, i get a frame rate that is from 0-25 very unstable, usually around 7-12, and sure if I go the lowest settings in the games I can get very unstable framerates but i guess they can get up to around 35-72 but drops to like 7 or 3 sometimes as well, so even on the LOWEST settings in the games I can't enjoy the games fully... It lags and such because of the low fps ofc...
    Other than that it also have a heat issue, mostly when running windows 8.1 in bootcamp.
    It get's quite hot, just by opening a browser window, and yes i have tried reseting smc, and p-rams, many times.. nothing seems to help.
    And even if it helped the heat problem, the gaming problem is still there.
    Now to my specs: (I have the macbook pro retina, mid 2012, 15 inch)
    - Prosseser: 2.6GHz quad-core Intel Core i7 processor (Turbo Boost up to 3.6GHz) with 6MB shared L3 cache. "Core i7" processor (3720QM)
    - Memory: 16GB 1600MHz DDR3L onboard memory
    - Storage: 256GB ssd flash storage. (Seperated into os x = 130GB, windows 8.1 pro = 120GB) Running games and such from my 1TB external harddisk.
    - Graphics and video support:
    Intel HD Graphics 4000
    NVIDIA GeForce GT 650M with 1GB of GDDR5 memory and automatic graphics switching
    Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays, at millions of colors.
    And here's a link to see what is inside it for yourself: http://http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core- i7-2.6-15-mid-2012-retina-display-specs.html
    When that is said, apple's warranty has run out, and I didn't buy apple care, but I still have warranty from the store (humac) I bought it in, because in my country the law is warranty 2 years, no matter what, but if i can avoid it, I REALLY would like to avoid switching it out with a new one, since there could be problems all over again, and I would lose what I have on it right now, plus it's a hassle to get a new one, they will always try and fix it for a long long time before they give a new one, and probably can't find the problem...
    But if that's the only thing i can do about it, I will ofc, but just don't advise me to do that, unless there's no other solution to the problems.
    Please help me.
    ps: sorry if I posted it the wrong place, I wasn't allowed to post it the right place by apple...

    If the underlying hardware was exposed correctly by the CSM-BIOS when Windows was installed, your Device Manager should look like this.
    If the Windows installer did not see any devices as your screen indicates, Windows will use generic software-based drivers which will be very slow and painful.
    Rudegar ... I think the Windows installer did not see  any hardware, otherwise there should be HW with yellow triangles with exclamation marks.

  • My Cox Cable/Telephone splits to a telephone modem and a broadband modem.  The BB connects via ethernet to a Cisco Linksys E2500 wi-fi (whatever).  Can I plug my usb printer into the E2500, configure, and then print from my iPad?

    I have just purchased an iPad 2.  I have wi-fi for roku and have connected the iPad to it.  I want to print to my usb printer.  My connection is:  Cox Cable spit to telephone and broadband.  The broad band feed goes to a Cox modem and feeds the wi-fi.  The Cisco Linksys E2500, wi-fi's the Roku and iPad.  Can I USB from the wi-fi to the printer, configure (however), and then print from my iPad?
    If not, how?
    All comments will be appreciated.
    Alan G. Watkins

    the ipad cannot airprint to a non airprint printer.... i think that the only solution is to install helper software on a computer that has an attached printer and share it through the computer only...computer would have to be always left on
    try this....http://www.collobos.com

  • I have a MacBook Pro (15-inch, Late 2008) and am currently running Snow Leopard 10.6.8. I would like to know which is the most stable upgrade for my model. I have read some reviews of Maverick and Yosemite making the older macs slower. Is this true?

    I have a MacBook Pro (15-inch, Late 2008), Intel Core 2 Duo 2.53 GHz, 4GB Memory. and am currently running Snow Leopard 10.6.8.
    I would like to know which is the most stable upgrade for my model? Mountain Lion, Mavericks or Yosemite?
    When I had gone to the apple care centre in India a few months ago to upgrade my OSX to Mountain Lion, I was told that considering my macbook pro's specs, upgrading it would just make it less efficient, and that I should stick to Snow Leopard unless I consider buying a newer mac that would benefit from it. Is this true? I find it a bit hard to believe. Which update is most recommended?
    I also notice that my mac has gotten considerably slower. While using chrome, it buffers and struggles with even just 5 tabs open. Could this have something to do with my current ios? As a precaution, I have always been making sure I have enough free space on disk i.e around 70 - 100 free out of 250GB.
    Any advice is appreciated.
    Thanks in advance.

    Mavericks is no longer available from the App Store, so your choice is Yosemite. One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won't have to go though the revert process.
    Check to make sure your applications are compatible.
    Application Compatibility
    Applications Compatibility (2)

  • HT204291 Airplay mirroring. Macbook 2012 retina display. Unable to see desktop on television, audio works perfectly. Both OS on ATV and Mac are running latest versions

    Airplay mirroring.
    Macbook 2012 retina display. Unable to see desktop on television, audio works perfectly. Both OS on ATV and Mac are running latest versions.
    Firewall set correctly (allow incoming...)
    When I click mirroring to turn it on, teh Apple TV screen goes blank (from its home setting)
    Any help appreciated.

    Hi!
    I figured it out! It was a firewall issue.
    I use Handsoff and I checked it before i wrote here. There was no "user defined rule" that denied the communication but when i changed to "All rules" the program displayed several rules regarding AppleTV and its IP.
    So if anybody has the same problem make sure you see all rules of your firewall and get rid of the AppleTV related rules generated by the program itself. You dont need to update to the latest iOS on the AppleTV!
    I hope that I can help some people with this info to fix the problem.

  • I have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

    i have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

    It is required to be able to connect. Download SP3 here. http://www.microsoft.com/download/en/details.aspx?id=24
    I Hope I Was Able To Help You Or Solve Your Question.
    Simmm
    3/12/2012
    If Someone Helped You, Click
    "This Helped Me"
    If Someone Solved Your Question, Click
    "This Solved My Question"

  • HT1689 since doing the 7.0.4 update i notice that my mobile data has doubled and i am running out of data mid month.  I've disabled apps s not many running.  Any suggestions?

    since doing the 7.0.4 update i notice that my mobile data has doubled and i am running out of data mid month.  I've disabled apps s not many running.  Any suggestions?

    I am having the same issue even with the newer 7.1. I have a 1-100 KB data push on both my husdand's and my phone every hour on the hour (i.e. my will be at :23 of the hour and his will be at :13 of the hour and it will change). This is whether we are on a WIFI and with all apps, background refreshes, push notifications, etc turned OFF.

  • I have a new Macbook pro, about 2 months old, and at times running video, the fans starts and does not stop. how do you get it to stop.

    I have a new Macbookbook, about 2 months old, and at times running video, the fans starts and does not stop. how do you get it to stop. Also i am thinking once the video is done  the fan should be slowing down and getting quiet on its own.

    Your fan(s) will run at high speed (i.e., loudly) while video is playing, and you can't get around that.
    If your fans are not slowing down within 2-4 minutes after CPU- and/or GPU-intensive usage ends, and the application that was showing the video is still running, Quit that application. (In fact, if you're accustomed to Windows, you may not realize that simply closing a Mac application's window does not quit the application. You still need to use the Quit command in the application-name menu. There will always be a bright dot beside or below the application icon in your Dock for each application that is open.) Quit the ones you aren't using, and see whether that allows the fans to slow down without restarting the machine. If that doesn't do the trick, reset the SMC:
    http://support.apple.com/kb/HT3964?viewlocale=en_US&locale=en_US

  • After upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues

    after upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues. my computer now freezes and programs close randomly. The usual command for opening windows with bootcamp doesnt work. once in restarted my computer after it froze and it rebooted in windows automatically. i really just want to know if there is a way to take the upgrade off my laptop because it is very annoying.

    Hi Memalyn
    Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
    My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
    If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
    Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
    Let us know what you find out, and if you manage to get your space back.
    Matt

  • I have an IMAC and I'm running OSX 10.9.2.  I'd like to store my Aperture /IMovie Libraries to an external hard drive.  In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the externa

    I have an IMAC and I'm running OSX 10.9.2.  I'd like to store my Aperture /IMovie Libraries on an external hard drive.  In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.  Is this possible? Can I set up a RAID 5 format for redundancy?

    I'd like to store my Aperture /IMovie Libraries on an external hard drive.
    That is fine and recommended.. use the fastest disk you can afford.. ie Thunderbolt>USB3>FW800>USB2.
    In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.
    Let me be clear.. you want to partition the one disk.. use it for TM and move your files to the external disk.. and then backup to the same disk.. You can do it.. but that is not a backup.. that is an experiment in how long you can get away with running files and backups on the same disk before you lose everything.. like Russian Roulette.. pull the trigger enough times and laws of probability will do you in.
    You must have backups on a different disk .. otherwise it is pointless.
    Can I set up a RAID 5 format for redundancy?
    No.. you can buy special USB and Thunderbolt external drives that support RAID..
    BUT that is still not a backup.. let me show why.. you make a silly move and corrupt your file in aperture.. it is not that rare.
    Raid will corrupt all copies of the files.. it is replicated across all disks.
    Delete a photo it is deleted across all disks.. you have no recovery.
    Alway, always consider RAID system one disk.. backup onto another disk.. and if the photos or movies are at all important to you.. ie your family .. make another copy and store in a relatives house.. There is no such thing as too much redundancy.

  • Why are most of the apps (anything that has to search) on my iphone4 and ipad (1) running very slow (or not at all) since iOS5 update...esp google. Search seems to go quickly, but then when I try to open a link..nothing. I have turned off icloud.

    why are most of the apps (anything that has to search) on my iphone4 and ipad (1) running very slow (or not at all) since iOS5 update...esp google. Search seems to go quickly, but then when I try to open a link..nothing. I have turned off icloud.

    I am having the same problem. Did turning off iCloud work? Did you just turn everything off or did you actually delete the account off your iPod?

  • Changes made to recurrent events in ical and/or iphone 4 will not sync since upgrading phone to iOS 5. I have an old macbook pro and it is running snow leopard OS 10.6.8. I have a minimum of 40 recurring events per week, several of which change.

    since upgrading phone to iOS 5. I have an old macbook pro and it is running snow leopard OS 10.6.8. I have a minimum of 40 recurring events per week, several of which change. I use the information to schedule future appointments based on those changes and it's causeing a major problem to not have the changes sync. Any help would be very much appreciated.

    Did you try to replace the calendar info on the phone with the one on your Mac? You can find this option in iTunes/Info pane, Advanced section.

  • I have a macbook running on 10.6.8 and my itunes running on 11.1.1 .... i cant get my itunes to show Itunes Radio in my music tabs.... someone help

    I have a macbook running on 10.6.8 and my itunes running on 11.1.1 .... i cant get my itunes to show Itunes Radio in my music tabs.... someone help

    There is also an option to reset all data on the device with the next sync.
    MJ

  • How do I download Photoshop for windows xp and vista.... I currently pay per month for photoshop and a computer running vista i ned to install photoshop on two aditional machines. How can I download, photoshop says I have an os that is no longer supported

    I have a computer running windows vista that I pay per month for photoshop, I want to use photoshop on two other computers I have, not that it matters but they are both identical hardware wise, and software one runs xp and the other runs vista, I can upgrade but I am not intrested in other os. When I attempt to download I am told that my os is no longer supported. Now i know that I could find an offline version and should be able to get it installed but im not sure of a safe site that provides the iso or install exe. I want to use the other two computers because they have touch interface early computer/tablet highbird. thanks in advance.

    Michaelt65951582 I am sorry but you will need to run at least the minimum operating system to use Photoshop.  You can find the system requirements at System requirements | Photoshop.  I would recommend upgrading to Windows 7 or later.  You may find that your computer can support the more recent operating system depending upon the hardware installed.

  • Wireless mouse and keyboard lag. running no programs.

    hello. im having issues with my brand new Microsoft 2000 mouse and keyboard. iam running a brand new week old hp pavilion desktop computer with windows 8.1. i have tried updating drivers and ive tried unplugging and plugging the receiver back in and nothing
    seems to help. i have performed multiple scans of my computer with my anti virus and there is no infections detected. The computer had this problem right out of the box.    

    Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription.  This is a standard response I’ve written up in advance to help many people (thousands, really.)
    who post their question in this forum in error, but please don’t ignore it.  The links I share below I’ve collected to help you get right where you need to go with your issue.
    For technical issues with Microsoft products that you would run into as an
    end user of those products, one great source of info and help is
    http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
    http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
    For Technical issues with Microsoft products that you might have as an
    IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
    http://social.technet.microsoft.com/forums/en-us, and search for your product name.
    For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
    http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
    If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
    http://community.dynamics.com/
    If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize!  Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
    of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing. 
    If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you!  It’s called the Where is the forum for…? forum and it’s here:
    http://social.msdn.microsoft.com/forums/en-us/whatforum/
    Moving to off topic. 
    Thanks, Mike
    MSDN and TechNet Subscriptions Support <br/> Read the Subscriptions <a href="http://blogs.msdn.com/msdnsubscriptions">Blog! </a>

Maybe you are looking for