AE Base and Hub Question...HELP!

I have an iMac connected to a hub along with my printer. I bought an AE Base Station for wireless internet for my iBook upstairs. I want to keep my iMac wired to the hub but connect the base station so the iBook can connect to the internet. THIS IS SUPPOSED TO BE SIMPLE!!!!!! I connected my cable modem to the hub and connected my iMac and the Base Station to the hub. I DOESN'T WORK!!!!! What am I doing wrong?????

A hub is not the proper device to share an internet connection. You need a router like the AirPort Extreme base station (AEBS).
You need to connect the equipment like this:
cable modem->[WAN] AEBS [LAN]->hub
Make sure that your AEBS is configured to distribute IP addresses. All of your devices will get an IP address from the AEBS.

Similar Messages

Apple id is disabled, to reset the password I do not know the email and security question. help what to do?

apple id is disabled, to reset the password I do not know the email and security question. help what to do?

Hi ingaosk,
Thanks for the question. Based on what you stated, it seems like you did not receive the reset email. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
If you didn't receive your Apple ID verification or reset email - Apple Support
Thanks for using Apple Support Communities.
Cheers,
Mario

I forgot my rescue email and security question help!!

well its been like 2 yrs since I did my security email and question so can anyone help me to reset them with a link of some sort cause all the links i've found wont tell me how to do both!!

 Account Security Team (AST) 
Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team.

IPhone 4 and iTunes question-HELP?

ok- so, i have an existing iTunes account (current version 9.2)- i previously had ONE device attached to it- my 3Gs that i upgraded to my iP4 with.
I did not wipe my 3Gs- as i sent it to my daughter who placed her SIM from her 3G into it- HOWEVER, since activating my iP4 the only phone that has been synched to my iTunes is the new iP4- i was able to transfer all of my 90 apps- FINE- but i have an issue with my audiobooks-I keep getting this message when i try to put any of my audiobooks onto my iP4:
"THE PHONE "JILL...." IS SYNCED WITH ANOTHER ITUNES LIBRARY. DO YOU WANT TO ERASE THIS IPHONE AND SYNC WITH THIS ITUNES LIBRARY? AN IPHONE CAN BE SYNCED WITH ONLY ONE (1) iTUNES LIBRARY AT A TIME. ERASING AND SYNCING REPLACES THE CONTENTS OF THIS iPHONE WITH THE CONTENTS OF THIS LIBRARY"
ummm, my question is: A) What other Library might they be referring to? It syncs fine on this one and only iTunes account i have had for years- B) i am concerned WHAT exactly will be erased and replaced??? What is the point of this message if the APPS on the phone are from my one and only library?
I originally thought that maybe i was getting this message because all of the audiobooks had been previously loaded onto my 3Gs and i did not care- as i had already listened to them. BUT I just paid $26 for a new audiobook from iTunes and want it on my iP4- and it STILL gives me this message...
ANYONE?

looking for any input on this? I have had one iTunes account EVER- same one- same password- i am NOT logging on to the "wrong" account- am i just confused by the message as to erasing my iPhone? Again, it syncs properly as to apps and all of my contacts ETC- it is JUST PERTAINING to AUDIOBOOKS and MUSIC?? Even new purchases...

Sound Blaster Z headphone gain and other questions, Help Please

Hello all, I recently installed a Sound Blaster Z on my msi z77a-gd65 board running windows 8.1 and using the latest driver.
I want to use the sound card for gaming via my headphones, but am running into several issues.
1.The first is that it appears that my Headphone gain is set to high. I cannot set lower volumes correctly via headphone as it appears to go from very quiet to very loud and its only on 10 in windows. Ive looked through the Sound blaster control panel but have not found a setting to remedy this.
Any help or tips with this problem will be appreciated.
2.Also I use TeamSpeak 3 while gaming and it appears the surround effects are being applied to this voip program making people very difficult to hear.
Is there a setting or a way to avoid this?
3. Since I have to setup my speakers to 5.1 surround for the surround effects to take while in headphone the problem arises that while im back using the desktop speakers I will have to set the speakers back to stereo to get proper sound.
Is there a way around this?
Any help with any of these issues woukd be greatly appreciated.
Thanks to all.

Originally Posted by Anarion
This card is loud as hell. I have to use line out at 10% and then use ACM at around 66% if I want to keep my hearing. Headphone out is basically unusable. What makes this annoying is that they do no allow putting card in headphone mode and output the sound through line out so I can't use headphone mode but I'm still using headphones.
You haven't found a way to change this?
The sad part is that I really like the sound it makes through my headphones, its just to ****ed loud. Its really defeating the whole porpoise of purchasing tis audio card in the first place.

Questions on installtion and ram please help! Pc tech with new Job!

Im a Pc tech with a new job Im am in charg with a new Mac network . So Im great at PC.s just fuzzy on Macs.
Here is my problem.
IMac 17" flat panel.
New Hard drive , new cable (IDE), Tryed to install New OS ( just OS X) got throught the first 5 mins in the installer , the it stoped and told me that it had encountered an error and to restart.
Now I get an error 139 installer has unexspetanly stopped.
Press return to reboot.
Now pressing return never works have to hold start button to reboot.
Ran hardware test of cd Im gettting a a mem_/2/4 error.
I assusm that is a bad stick of memory? There is only 1 stick in there.
I belive that its using pc133 256meg for memory.
I have put a few pc133 sticks in the mac but none will work eather get a bad memory beep or no display .
Does it have to mac memory or special latency ?
Have opened the firmware and reset -all -nvram and defaults
Have remove Air Port card and all other stuff , onlly keyboard and mouse and power cord .
Does that sound right? If you need more info let me know.
Any other clues?
Any book that an tech like me (6 years fixing pcs) should read for macs? thanks for all your help in advance.
James
G5 Mac OS X (10.2.x)

Another thing to consider, a free to use download (donationware) is
MacTracker; a small data base of Apple and Macintosh product specs.
If you don't already have it, see: http://www.mactracker.ca to download.
Some online manual sites had unauthorized copies of protected works
and those sites were pulled from the internet; but they had service
manuals in pdf for many models of computers. You may be able to get
the official versions of pdf manuals through a subscription service for
an annual fee; this may require searching and asking questions. It may
also require an IT budget you may not have, to get a Mac-only archive.
At one point I was given some technical support information to trouble-
shoot my own ailing under warranty Apple computer(s) and the information
is very helpful, when you have a need for the details they contain.
I was careful to use them for non-invasive troubleshooting only.
One older online source appears to have ftp:// links, but I was never
able to make them work. The site may not have valid content or could
be somehow blocked; so if you find such a site by searching for older
Apple Manuals online, it may not yield anything. Or it may be illegal.
Some of the low-end RAM chips can be problematic; I found at least
one to add major issues in my iMacG4 and made it hard to diagnose
another major hardware problem. Tossing the cheaper RAM (at retail
was higher cost than decent RAM) was the best thing; got a better one.
There should be a little information on boot ROM (firmware) per model in
the MacTracker database you can use offline. You may need to know more
about the use of Open Firmware in Macs. Hope this helps some.
PS: for a time, you could get tech manuals on CD from places
such as http://www.applerescue.com/ (they have OS installers
on disc for sale there, primarily) and also a search of the web
may get you a source of tech books for repair service.

Hey. i just restored my iphone and now it says your apple id is disabled then i forgot everything about my email and security questions please help me enable my apple id

hey. i just restored my iphone and now it says your apple id is disabled then i forgot everything about my email and security questions please help me enable my apple id
i dont think there is another way to unlock my apple but i need to

Hello there, Th3FoX98.
The following Knowledge Base article is a great resource for what to do if you've forgotten the answers to your Apple ID security questions:
If you forgot the answers to your Apple ID security questions
http://support.apple.com/kb/HT6170
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I forgot my i cloud apple password and security question and i dont remember the id well how can i activate my device? please i need help

i forgot my i cloud apple password and security question and i dont remember the id well how can i activate my device? please i need help

Hello there, Hisham1977.
The following Knowledge Base article provides the steps to follow if you've forgotten the answer to your security questions:
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
What should I do if I don't remember the answers to my Apple ID security questions?
If you forgot the answers to your security questions, try answering them at least once to see if you can get them right, even if you're not sure you remember the answers. If you're confident that you can't remember them, try one of the following:
If you have three security questions and a rescue email address, sign in to My Apple ID and select the “Password and Security” tab to send an email to your rescue email address to reset your security questions and answers.
If you have one security question and you know your Apple ID password, sign in to My Apple ID and select the “Password and Security” tab to reset your security question.
If you have one security question, but don't remember your Apple ID password, contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
Note: If you forgot your password and answer your security questions incorrectly too many times in a row, you will be unable to try to answer your security questions for a period of time. During that time, you will not be able to reset your password and will not have access to your account.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro

Trying to download songs on iTunes and it's asking for "my 1st car I owned" and other questions that I never answered. It won't let me download anything til I answer them. Can you help me?

Trying to download songs on iTunes and it's asking for "my 1st car I owned" and other questions that I never answered. It won't let me download anything til I answer them. Can you help me?

You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(94816)

My imac is frozen with the following notice: USB over current notice. have tried powered hub, no help. have tried unplug and restart, no help. any suggestions?

my imac is frozen with the pop up notice of "usb over current notice, a usb device is currently drawing too much power. the hub it is attached to will be deactivated". have tried unplug and restart, no help. have tried power hub, no help. my wired keyboard and mouse do not work. help.

Unplug all devices including your mouse and keyboard. Now do a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computer's power cable.
Wait another 5 seconds and press the power button to turn on the computer.
It is the 5 second timing that initiates the reset.
If it starts up normally plug in 1 item at a time. You may have a defective device that is drawing too much current.

Hi please help me I'm appleid disable 7.0.4 iPhone 5s by email and security questions forgot not active now please please help me

Hi please help me I'm appleid disable 7.0.4 iPhone 5s by email and security questions forgot not active now please please help me

You might be able to re-enable your account via this page : http://appleid.apple.com, then 'reset your password'
You might then need to log out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then log back in so as to 'refresh' the account on it
For your security questions, if you don't have a rescue email address, or you don't have access to the email account, then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699 - you can also try this link to get your account re-enabled if the above doesn't work.
When they've been reset you can then use the steps half-way down this page to update/add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

I messed up badly by trying to restore my brand new macbook pro by doing restart then command R and choose disc utility repair now when I start ,all I get is the white screen with a folder and a question mark,What can I do???help please

I messed up badly by trying to restore my brand new macbook pro by doing restart then command R and choose disc utility repair now when I start ,all I get is the white screen with a folder and a question mark,What can I do???help please

Can you still boot to the Recovery partition using Command and R whilst booting? Or did you wipe the Recovery partition as well?
If your Recovery partition is still intact, you can simply boot to it and reinstall the OS via the Internet. If you wiped the Recovery partition, you can hold down Command, option and R keys whilst booting and boot into true Internet Recovery mode. You'll be able to reformat the hard drive, erasing all partitions (format it as "Mac OS Extended (Journaled)" with a dingle GUID partition) and then reinstall the OS that shipped with your machine.
Note that you should use a physical Ethernet connection when restoring over the Internet - it's three times slower if you use wifi.
Try your Recovery partition first and if that doesn't work, use Internet Recovery.
Clinton

Question about base and target document

Dear All,
Does anyone know which table maintain the relationship between base and target document.
For instance, user clicks the base document in the form of AR invoice and return the base sales order.
From Samson

Hi,
In each and every document table the base docs and the target docs information is stored.
Just take a look at the REF DB help file in which u can see the fields and their relations.
For AR Invoice in the lines table INV1 there are 3 fields BaseRef,BaseType,BaseEntry these fields help u in knowing the base doc details, and for the target doc details the following fileds will help, TargetType,TrgetEntry.
U can find the reference file at the following location. C:\Program Files\SAP\SAP Business One SDK\Help\REFDB.chm
Vasu Natari.

HT5312 PLZ help! I forgot my rescue e-mail and security question. What can i do?

PLZ help! I forgot my rescue e-mail and security question. What can i do?

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(99891)

AirPort Express Base Station with 802.11n and AirTunes Questions

My internet comes in to one room in my house. All that is in there is a cable modem and a Linksys wireless router. All computers in my house access the web wirelessly through this modem.
In another room I have an iMac, that is my main computer and has my music on it.
Across the room from that computer is my stereo. There is no ethernet connectivity near the stereo.
I want to play my iTunes through my stereo and use my iPhone as a remote, but I am happy with my current router.
My questions are:
1. Can I buy one AE Base w/iTunes and use it as a link between my iMac and my stereo without using it for Internet access?
2. Do I have to buy two AE Bases and use one to replace my current router?
I live in a small town, no Apple store. I called Apple support yesterday but nobody I talked to seemed to be able to answer my questions.
Any light that anyone can shed on this for me would be much appreciated.
Scott

you can use the express near the receiver and connected to it then if the range is acceptable have it join the linksys network. you can set it up no internet just stream music. it may give you some grief to set it up but with patience and logic its doable.

AE Base and Hub Question...HELP!

Similar Messages

Maybe you are looking for