AE CC 2014 error 33 § 7! Project file is broken. (iMac)

Hello there,
I have the following problem:
I did a film with lots of text animation in After Effects CC 2014 (the newest version).
For different versions of that film in different languages I took my origin german project file and saved it as a different project with a different name.
I did my modifications for like 30 min and then I started with the next project in the next language. I was doing that the hole day. In the end of my workprocess I wanted to export all of my films.
So now when I open my projects, it says that the file is broken: Error 33 § 7.
Even the Auto-Save-Files are broken. I can't open any of these projects except the german file. Everything I did, is lost and I have to do it again.
I've allready reinstalled the suite but it's always the same. Is there a way I can still open them? What is the source for that error?
Here are some technical details:
iMac 27" 2009
OSX 10.9.5
3,06 GHz Intel Core 2 Duo
8 GB RAM 1067 MHz
ATI Radeon HD 4670 256 MB
I would be pleased for more help.
Greetings.

Nobody can tell you anything without knowing the specifics. For starters, verify the integrity of your storage drive! Other than that this could be anything from font errors to specific issues using special characters in the text to more generic stuff like the cache getting tainted....
Mylenium

Similar Messages

Error reading project file : no protocol

I have followed the instructions exactly as in the j2ee tutiorial ,but, when I run asant , an error occurs:
: Error reading project file : no protocol: ../../common/targets.xml
Urgent!

Could you please provide a bit more detail such as which sample you are using? Also are you using the latest version of the tutorial and have you configured your build.properties in the samples/common directory?

Error writing project file

I am creating a dll project and keep getting the error
Error writing project file
Name.prj
(An unspecified error has occured, probably due to corrupted data)
Yet the projects compiles and creates the dll and lib files.

Hi chetp,
Could you please provide more details? What version of CVI are you using? Are you creating a project from template? Where is the project located?
Best regards,
Nelu F. || National Instruments.

After Effects CC 2014 - Rendering / saving project file to CS6

Hello all,
I'm writing here to try to understand the st**** decision to exclude mp4 and mpeg from the render possibilities from After Effects CC 2014. I would gladly go back to CS6 but as of now I have more than 40 hours of edited video project in CC 2014, which of course cannot save project files to CS6, which is another brilliant move by somebody in Adobe that has the title position of "the dude for giving ideas to p*** people off". Now the problem is this, if I choose to export just a single clip from my composition of course I cannot export it to a container and codec of my choosing since it cannot be exported to Media Encoder, and has to be done in After Effects or I have to make a composition for each and every file, in order to export it to to the Media Encoder.
Now I ask you good people any way to move my projects back to CS6, remove this unusable piece of software and be over with it, I simply don't have the time to be toying around with Adobe's new found glory for Apple and exporting stuff to QuickTime, taking 3 times longer than mpeg. Tried with OpenSeasame and by just exporting an XML file but none work so if there is any other way please let me know.
Good thing I only got 1 month and didn't pay for the whole year...
Cheers,
shorto

Did you use any of the new features in either AE CC (the original one) or CC 2014? If yes, you're kinda stuck.
If no, you'd have to engage in a two-step process: backsave the AE CC 2014 project to AE CC, then open the project in AE CC and backsave to CS6.

Error opening project file

I am getting some error while opening the saved project file in
JBuilder2.0 It gives me warning messages saying that error
reading dependency file for package. Source c:\...\...\ does not
define any classes or interfaces. Check source path source c:\...
\...\ can not be found on sourcepath by appending \ to source
entry. Also it gives a FatalError cannot access class <class
name> ;no source found ;must be compiled because <classname> is
referenced by ......
My source and class path are set as default in JBuilder default
project properties.
Before saving the project runs fine but on reopening I am not
able to run it due to above mentioned error. I am new to
JBuilder and need help from you.
Thanks
null

Ajay (guest) wrote:
: I am getting some error while opening the saved project file in
: JBuilder2.0 It gives me warning messages saying that error
: reading dependency file for package. Source c:\...\...\ does
not
: define any classes or interfaces. Check source path source
c:\...
: \...\ can not be found on sourcepath by appending \ to source
: entry. Also it gives a FatalError cannot access class <class
: name> ;no source found ;must be compiled because <classname> is
: referenced by ......
: My source and class path are set as default in JBuilder default
: project properties.
: Before saving the project runs fine but on reopening I am not
: able to run it due to above mentioned error. I am new to
: JBuilder and need help from you.
: Thanks
Are you using JBuilder or JDeveloper?
In general if you have not even done any work and are starting
fresh, you should of course not see any problems. If so,
then something must have gone wrong during the install. You might
want to just re-install as a precaution.
Hope this helps..
-JDeveloper Product Mgmt
null

Exporting imovie project files from an imac to a macbook pro

I have imovie files on my imac and want to move a project files to my macbook pro and edit while traveling. How do I simply send or share files between the two computers with imovie?

The key is to make sure the laptop is connected with a firewire cable to the other computer. It will appear on the desktop of the iMac as if it were an external harddrive. If you can see the Macbook Pro's hard drive on the desktop, you will be able to also see it within iMovie. If you don't see the Macbook Pro's hard drive in iMovie double check to make sure you have turned on 'Group Events by Disk' button in the Event browser. That's the little square button with a cartoon hard drive icon in it that sits in the upper right hand corner of the Event Library.
Once you are able to see the Macbook pro hard drive in the Event Library, drag the events onto that Hard drive icon. Same will be true for the Project Library, drag the projects onto the Macbook Pro hard drive there too.
When everything is copied, shutdown both the iMac and the laptop (you may need to hold down the power key on the laptop until it shuts off). Disconnect both macs, and startup the laptop, open iMovie. It should spend a little time 'discovering' all the new projects that have been copied to it and the Events and Project Libraries will show all the new video clips you copied.

Error : The Project File can not be loaded

Dear all,
We have deleted the copernicus folder from my documents to remove cache.
But now while opening my project i see error message like this
please help!

Hi Horst,
Tried that not working. Issue is that the file ".myproj" doesnot contain any data.
and one of the ABSL file also contains not data.
and if i try to refresh i get the error message "The solution was not opened correctly , please report incident to AP-RC-BDS-SOL.
This is very frustratating .
I have raised the incident with very high priority yesterday , but still no reply
I think if i check on web ui my solution is working fine so they just need to send me those files again then if i try things will be synced again.

Increasing size of canvas file in Illustrator CC 2014, for master project file purposes

Hello, our company is using Illustrator CC for digital design, we would like to keep all the design screens in one files on different artboard,
because of the convenience of changing global colours, character styles and symbols.
Is there any way to increase the size of canvas file, or do any plugins exist for this?
Many thanks

Clockiebox,
In addition to what Monika said, you may consider which is worse, to scale down to have all Artboards fit into the 16,384 x 16,384 points Workspace (and scale up in connexion with printing, which is relatively straightforward with Acrobat/Reader), or to have Artboards spread over multiple Layers/documents.
If you scale down, remember to scale up Effect>Document Raster Effects Settings resolution and raster image resolution (using the reverse scaling factor).

Another Project File is Missing error

To make a long story short... after importing video clips into iMovie and then pulling the .dv files out of the project file and reimporting the files into another movie, now when I try to open the movie, I get the error "A Project File is Missing" and the ignore/ignore all error alerts. When the movie finally opens, the clips are missing, but they are in the trash.
I can pull them out of the trash and work on them, but the edits don't save. If I try to resave the project, then close and re-open it, I still get the errors. I'm using iMovie HD v.5. I am running OS 10.4.9 from an external firewire drive formatted HFS Extended (Journaled). When I start, there's about 57 GB of free space on the drive. After importing the files (one 9.5 and one 8.1 GB in size ), there's 39.9 GB of free space on the drive. There are two files in the Media folder... copies of the original dv files.
What can I do to save the project, so the files are considered part of the project?

Hi Chad - I'm sure you will be helped also by the real experts on this forum, but in the meantime you should be aware that iMovie cannot import MPEG files. You will note that the Error Message is saying there is an unarchiving problem. They must first be converted to DV format. You may need a free app. called StreamClip for this operation:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
Hope this helps.

Upgrade to Robohelp 9: Your project file cpd is corrupt

Hi
I have installed Robohelp 9, and is now trying to upgrade a version 6 project to version 9. When I press upgrade in Robohelp, I keep getting the error "Your project file ...cpd is corrupt and cannot be opened". I have tried to delete it and open the xpj-file again, but there is no difference. Then I found something about a file called rhvariable.apj. I copied this file from a project that I already have upgraded and which were fine. But this gave no solution either. I also read something about deleting the cpd-file and the xpj-file and then edit the hhp-file. The problem is that my corrupt projects - I have 3 at this point - have no hhp-file. So there is a difference.
Could anyone help me? I have search and search
Best regards
Else

In case this helps anyone I will share my experience...
I've been waiting ages for the purchase order to go through for my new license for the latest version of RoboHelp. My Help project was in version 6. I had on one PC a trial download of RH 8 and on my other PC a trial download of version 9. (I work in IT hence the multiple PCs)
So, just a couple of days ago, I tried bringing in my v.6 project into v.9. I got the cpd file corrupt error and I tried deleting it several times. I even tried re-copying it in, etc. Nothing worked. I was annoyed....so just to try something I opened up my trial v.8 and loaded in my old project and it upgraded fine with no problems. I took this upgraded project and brought it into v.9 and, lo and behold, it worked! (Both being trial versions and just yesterday I got my v. 9 license key and registered with no issues)
I am up and running and everything looks great and I've generated and started playing around with all of the new features I am unfamiliar with...having been stuck with v.6 for so long!
Hope this helps someone....
thanks,
liz

The project file ' ' has been renamed or is no longer in the solution.

Hello Folks:
   Developing on Win 8.1 Pro, Visual Studio 2010 Pro, C++.
   I'm revisiting a project I haven't touched in over 2 years.
   Attempts to build result in a pop up displaying this error:
      The project file ' ' has been renamed or is no longer in the solution.
   And the build terminates.
   Things might have changed in the underlying static libraries used by other projects.
      I've looked through the Solution Explorer and the project's properties "Framework and References" window but I don't see anything with such an odd name.
   How do I resolve this problem?
      Thanks
      Larry

Some other things to try:
1. Reload each project in the solution (Right-click/Unload Project; Right-click/Reload project). See if any of them has an issue reloading.
2. If you have multiple projects in the solution: Make a copy of the solution and load the copy. Go in Build Dependencies and uncheck all. Now build each project individually and see which one has the problem. (Some of them might not link
due to missing libraries, but that's OK. You just want to see that the build starts). Double-check which configuration Visual Studio picks when it builds each project; if they are not all the same, the problem is with the project configurations.
3. Load the solution file with the XML editor. (Make sure no other Visual Studio instance has the solution open when you do this). Check each Project line for oddities, specifically, empty or mangled names, or missing project files. Also
check the Configurations. It could be that the problem project doesn't have an equivalent configuration to the one you are building. Sometimes the configuration definitions in the solution file get messed up.

The project file could not be loaded

a new windows 8.1, VS2013 install ... I use skydrive to sync all my source files to a folder named c:\skydrive. When I try to open a .SIN file from the c:\skydrive folder I get an error in visual studio:
C:\Skydrive\c#\AutoCoder\AutoCoder.csproj : error : The project file could not be loaded. The file cannot be accessed by the system.
C:\Skydrive\c#\AutoCoder\AutoCoder.csproj
When I right click the .csproj file in windows explorer I do not see a security tab. Not sure if my user is authorized to the file or not.
How to open a project in VS2013 from my skydrive folder?
thanks,

Hi Steve,
Generally we could open the project from the skydrive folder, I often use it. As you said that it doesn’t work in your VS, I doubt that it would be related to this project.
Please delete the .suo file in your project folder, and then reopen the project file again (.csproje) again.
If possible, you could run your VS as the admin, and then open this project.
If still no help, maybe you could create a new project for it.
http://stackoverflow.com/questions/11171322/how-can-i-recover-a-corrupt-csproj-file-in-visual-studio-2010
Or you would contact the developer who created this project.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Combining FCE Project Files Contents

I started a wedding project on my external hard drive (importing footage via imovie as I can't import direct to FCE, probably due to slippage on the camera - not sure that's relevant though). The pins on the power cable snapped. While waiting for a replacement cable (ages!) I carried on the project on my imac hard drive. My external drive is now back in action, so I would like to now combine what I have on the wedding project on my imac, with what I started on my external drive - and carry on from there as I still have some footage to import and edit.
I think I am ok moving the media clips across (which I have on the imac desk top) to the capture scratch on the external drive. My question is around what to do about the project file on the imac. Can I somehow combine that with the original project file on the external hard drive?
Or am I trying to approach this the wrong way?

Thanks very much for this Ian. I am quite new to FCE, so just to check my understanding - unlike imovie, FCE projects have a media file (containing the movie clips) and a separate project file containing all the references to how the clips have been edited etc?
If I just copy over the timeline of the continued project on my imac over to the original project on the external hard drive, does that mean the clips and the reference info will all be copied over and will automatically then live in the original media and project files respectively?
And even more basic - to copy over, do I just click into the timeline, go Edit, Select All (which will pick up video and audio tracks) and then Edit, Copy - and then paste into the timeline of the original project?
Apologies if this is all rather lame!

Moving an iMovie project file for editing on a different iMac

Does anyone know if an iMovie project file started on one iMac can be saved to a usb drive or dvd/cd to be opened on another iMac computer to continue editing? What I have done before is go to: movies>iMovie projects>selected file and save the selected file to a usb drive. I also save the pictures and voice overs/music files that I used with the iMovie project on the same usb drive. However, when I open the iMovie project file on another iMac all of the work that I had previously done is not there. I end up starting all over. I would like to start my project at home and do any finishing touches on the second iMac in order to decrease the time I have to spend at the second location. Any thoughts would be greatly appreciated. Thanks

When you move files to your second iMac, they need to be in the EXACT location. If you have your videos and photos in a folder on your desktop named "Movie Stuff," and you just throw them into a folder in documents called "Stuff" on your second iMac, iMovie will not recognize the files. You need to create the same path as the first iMac. In this case, you would have to make a folder called "Movie Stuff" on your second iMac's desktop, and move the files there.
Hope this helped!

Error saving Project 2010 files to network drive - doesn't see network drive

ANSWERED (11 April 2014):
So it seems the resolution to this is to simply create a new share with a different name. I used the existing folder (to retain NTFS permissions) and just select to Add a new Share (applying the same Share permissions as the non working Shares).
Deploying this new Share via Group Policy as a test resulted in staff being able to open files from Windows Search, save files through MS Project and the Share being accessible through browsing SMB.
All problems resolved by using a new share name for the existing folder. Seems to be a corruption in the namespace.
Note: I had previously deleted the share and recreated it. I had removed all NTFS permissions and readded (through both the GUI and icacls). This didn't make a difference.
Only changing the name of the share fixed the problem.
Original Question
Already
posted here... but Microsoft Support has not responded.
It seems some staff on some computers are having problems saving MS Project files to the network. This is only since an upgrade to SBS2011 (from SBS2003). The only difference now, is that network drives are mapped via group policy rather than a 'net
use' script.
This is affecting users on Windows 7 and Windows Server 2008 R2, with either MS Project 2007 or 2010. The users have full change access to the folders and can create new files and modifying existing files, just not a MS Project file. Other file tyes, e.g
Word .docx, Excel .xlsx, Adobe .pdf files, all work fine. These files can be opened, edited and saved normally without problem.
To replicate this:
The user opens an existing file or creates a new file on the network folder (either through Windows Explorer or MS Project). They then click File > Save in MS Project and receive the following error (see pic below):
An interesting symptom of this is that if you select File > Save As in MS Project, the Sae As dialog box doesn't remeber the path location of the network drive. MS Project instead prompts to save the file in the local users documents folder (see pic below):
If they browse back to the original folder where the file was saved and choose to save it there, they are of course, prompted to overwrite the existing file and they can save the file. But the same thing happens every time they open the file.
It seems the problem is that Project isn't seeing the path of the file or that the network drive is attached.
If a user closes the file without saving it, they are prompted to save the file and the prompt shows the drive path:
Do you want to save changes to "N:\... Projects\Active Projects\CC...\F4 Project Plan File\004 Programme\test project file.mpp"?
But choosing to save the file gives them the same result as Save As, they are prompted for a new location as if the original file location doesn't exist.
I have disconnected the mapped drive and connected it again using net use but get the same error.
I have reinstalled MS Project 201, installed Project 2010 SP2 and installed Windows updates and it does the same thing, exactly the same symptoms.
Further, if the user opens a file from the network drive, the file shows in the Project recent files list. If they try to open the file from the recent files list in project they get the following error:
"Project cannot open the file.
-Check that the file name and path are correct.
-Check that the file format is recognized by Project.
Project files saved in a version earlier than Microsoft Project 98 can't be opened...."
This is a test file that I created on the user's computer and network drive, This is being opened with the same version it was created in. If I browse to the folder in Windows Explorer I can open the file. Of course, I then can't save the file (I still get
the original error). I'm logged on with Domain Admin privileges.
I've checked these links from other threads (neither apply to my scenario):
http://support.microsoft.com/kb/983458/en-us|
http://social.technet.microsoft.com/Forums/en-US/excel/thread/2eeea140-7e6c-4cb9-a89b-06d2102bd9f7/
I've downloaded my TechNet version of he software and installed it with Sp2 and Windows updates and it does the same thing. This also happens on the Remote Desktop server (Server 2008 R2) using MS Project 2007.

Case 1
This error message appears when the document is open on two or more computers that are running different operating platforms. For example,
if the document is open on a Macintosh computer and you open it on a second computer running Windows or Windows NT, the error occurs when either user tries to save the document.
This problem stems from a difference between the ways Macintosh OLE and Windows OLE open files. As a result, you cannot save a file on two different operating platforms at the same time.
Case 2
This error occurs in Word 97 for Windows if you save to a MAPROOT type network drive connection on a NetWare server where spaces exist in
the file or folder name.
Case 3
This problem may occur if an anti-virus program running on a network has the ability to scan for macro viruses in documents in shared network
folders.
For example, if you have the following:
a shared folder on a network server
-and-
an anti-virus program is running on the network server that is set to monitor the shared folder,
when you attempt to save a document (across the network) to the shared folder, the anti-virus checker may cause the error to occur.
Case 4
This problem may occur on Novell networks when the AutoRecover files path is either blank or set to a network drive.
According each, please try the following workaround:
WORKAROUND
To work around this problem, use one of the following methods appropriate to your situation.
Case 1
Method 1:
Move the document to your local hard disk for editing. Move it back to the server after you finish.
Method 2:
Save a copy of the
file with a different
file name, and work on the copy, either on your hard disk or on the server.
Case 3
Method 1:
Move the document to your local hard disk for editing. Move it back to the server after you finish.
Method 2:
Do not use spaces in the directory or document names.
Method 3:
Do not use MAPROOT-drive connections. Map your drive connections to the volume-level only.
Case 4
Turn off the anti-virus protection on the network server and then try to
save the document. Contact your anti-virus protection software company for additional details and/or updates to their programs.
Case 5
Set the AutoRecover files path to your local drive. To change the AutoRecover path, use the following steps:
1.
On the Tools menu, click Options.
2.
On the File Locations tab, select AutoRecover files and then click Modify.
3.
Change the Modify Location dialog box to a
folder on your local drive and then click OK.
4.
Click OK to close the Options dialog box.
Hope that helps.
Smith

AE CC 2014 error 33 § 7! Project file is broken. (iMac)

Similar Messages

Maybe you are looking for