AE comps not showing in Dynamic link dialogue

I am trying to import several (25) AE comps into a new PPro project but the comps do not show in the dynamic link dialogue window.
All I get is the folder of work comps and not my final comps.
Any Ideas?
Also any way to batch import these?  I know... longshot, but I thought I'd ask.
Thanks In advance.
Mark

Are you using the media browser to import?  In the example below I have two comps in a old movie template I use for various reasons, which is created outside the project and then imported via the media browser. 

Similar Messages

  • Mac OS X Server v10.7 does not show the ethernet link aggregated interface I created in Server Hardware Network Dialogue window. Are link aggregated ethernet connections not supported in Lion Server?

    Mac OS X Server v10.7 does not show the ethernet link aggregated interface i created. Does Lion server support ethernet link aggregated interfaces?

    Thanks for responding Cold--
    Hardware: Mac Pro  3.0 GHZ quad core xeon
    I read the link but it still does not explain why the aggregated dual ethernet interface does not show up in the Network tab of the hardware section Lion Server. I was able to see it on the network and looks to be using a single static IP that I assigned. My concern was that is this supported and will it allow for failover and double performance of the single network interface.
    Any thoughts?
    Thanks again!

  • Why are photos that are placed on the page not showing up in links panel?

    seems really random, I have 2 files that have several photos on them, but one photo on each is not showing in the links panel

    not sure, just checking on errors from other co-workers, but I tried copying and
    pasting from Quark and got the same result, so that is probably what they did.
    thanks

  • I get "command.exe entry point not found" NSSUTIL_DoModuleDBFunction dynamic link library softokn.dll :windows8.1 64bit, tried reset and fresh install but NG

    I am using a 64bit fresh installation of windows 8.1 laptop with the latest 27.0.1 version of firefox. I have been getting start up error messages. The messages claimed that each of nss3.dll, mozglue.dll,plc4.dll,plds4.dll could not be found in windows. I found a good fix explanation on a site where I could download these missing files and copy them to the system folders on windows (in sytstem32 and sysWOW for 64 bit) Each time the error message popped up the next dll file missing and most recently the message has changed to “ command.exe entry point not found” NSSUTIL_DoModuleDBFunction dynamic link library softokn.dll As I can find no reference to this on the net I was hoping you might be able to shed some light on the problem.
    I have tried reinstalling and I have also tried the reset option in troubleshooting but the problem remains after restoring my FF backup settings. A completely fresh installation does remove the problem but the first installation of a new extension add on (but seemingly not plug-in) and the problem returns regardless of which add-on.

    I posted this question after the best part of 2 days trying to eliminate this, admittedly small but, irritating error. Some hours later I note the problem has gone away which I think is most likely down to a clean-up job done by the WiseCare 365 software.

  • My RoboHelp HTML 9 is not showing version control link

    My RoboHelp HTML 9 is not showing version control link in File menu and in Tools - > options. Do I need to set anything in project to see version control link?

    Welcome to our community
    Have you tried right-clicking the toolbars and ensuring you are seeing the Version Control toolbar?
    I believe it may also depend on whether you elected to install version control when you installed RoboHelp. And in thinking about it, *IS* there a version control system installed?
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • After the latest update Firefox does not show TRANSLATE THIS link on facebook

    After the latest update Firefox does not show TRANSLATE THIS link on facebook. I have many posts from Brazil but now they can not be translated since the link is missing. How to fix?

    See also:
    *https://addons.mozilla.org/firefox/addon/google-translator-for-firefox/
    *http://labs.microsofttranslator.com/bookmarklet/
    *http://googlesystem.blogspot.com/2009/11/google-translation-bar.html

  • How to refund to a buyer when paypal details does not show a refund link?

    How to refund to a buyer when paypal details does not show a refund link?

    Yeah, I understand, there is so much more to communication than words on paper.Folks interpret written words according to a whole lot of complicated emotions and feelings. We then project that onto the author and decide why we think they formed that particular combination of words.It is certainly far from perfect.What is missing is volume, intonation, body language, facial expressions, etc. Emoticons are a very big help.I am sorry that you interpreted my tone as abrupt. It was certainly not meant to be. I apologize if I have offended you in any way.I admit my lack of pc. I just did not see this as a social atmosphere, which it  really can be.I was just asking for information. I will try to do better in the future.

  • After Effects CS5.5 will not open a Dynamically Linked Premiere Pro sequence in the comp. window

    Hi all,
    I'm trying to export a Premiere Pro sequence which is in 2K and the footage has been shot as RED 5K. Adobe Media Encoder will simply not work as I am having the quite widely discussed issue where it will just 'hang' at certain points and not complete the export.
    The most popular solution to this problem is to export via the Render Queue in After Effects instead. However, therein lies the problem.
    I go onto After Effects. Choose File -> Dynamic Link -> Import Premiere Pro Sequence.
    The box pops up, I choose the Premiere Pro Project File then select the sequence I want to export. It then appears in the After Effects project panel window like so:
    However - when I try and drag this to a new composition window, one of two things have happened. Either A) nothing happens (literally, NOTHING changes) or B) as the following example shows, it seems to add it to a new composition, but the video is entirely black. I have tried rendering it and it just produces a black video.
    The other thing people seem to suggest is to just import the entire Premiere Pro sequence into After Effects. I've tried this, but any titles I have added in PP force the video to fade out then back in, in the place where the title should be?? So I can't export the video this way either.
    My system is as follows:
    Thanks massively in advance for any help that is provided!

    This is months old but I'm now having the same problem with AE and Premiere CS6 after updating last night: Dynamic linked sequence shows up in the project window in AE and even plays video if previewed, but will not drag or alt-drag into any comps, including a new comp (makes a new comp with matching settings, but empty).
    Furthermore, I do actually have an earlier version of the same sequence placed in one of my AE comps, which I think was done using the same steps just prior to updating the apps last night. Did this break?
    I'm a little concerned since the biggest reason I'm trying to use premiere is to eliminate the exports when adding graphics in AE.

  • Exporting comp from After Effects CC to Adobe Premiere Pro CC (2014) gives error message: "AE can not connect to dynamic link"

    I am trying to export an AE CC comp into a Adobe Premiere Pro CC (2014) video project. I can not drage it from AE to Premier Pro.  Is there a problem with the dynamic link between these two applications?

    Dynamic Link only works between After Effects and Premiere Pro if the applications are of the same version---i.e., both CC 2014 versions.

  • Comp empty in AE (dynamic link)

    I've seena cuople posts on this so it appears the problem exists but cannot find the solution.  Strange is that I've worked this way recently and just experienced this issue. 
    I've cut a short :30 spot in premiere CS6.  I wanted to basically use this base edit to add text and other overlay elements to the spot in AE.  For my purposes, I just prefer to work this way. 
    Bouncing over to After Effects, I use the "Adobe Dynamic Link" then to "import premiere pro sequence" to bring that :30 cut into AE.  It comes in and I see the Premiere sequence icon.  all good.  I can double click this imported premiere pro sequence and see it in my viewer.  However, when I try to bring this sequence into my already created composition with some text elements and other comps that need to be laid in over top it does not show up.  It just doesn't drop into my sequence.  I also tried dragging this imported sequence to the "new comp" icon and it's empty there as well.  I even right click on the imported premiere pro sequence and choose "create new comp from layer" still empty. 
    because I've worked this way and recently I was surprised and thought maybe there was some interferring plug-in or something.  any solutions?

    In case anyone comes across this I solved my own issue.  When working in Premiere, I had sent replaced a single clip in Premiere with an after effects comps to do some sky replacement.  So, that comp existed in Premiere as a dynamic link.  after a couple tests with other sequences working within AE as a dynamiclly linked sequence, I simply pulled that one AE comp out of the sequence as it existed in Premiere and then the sequence worked as expected when brought into AE.  as expected, a single instance of an AE comp creates a problematic loop. 

  • Problem with newly created CM Repository NOT showing in Repositories Link

    I am new to the Portal and this is the first time that I have created a CM Respository that is reaching out to a network drive (on a different domain and different server, our Platform is Windows).  Here is what I have done so far...
    1.  Created a Windows file share
    2.  Configured a new CM Respository Manager (Persistence Mode FSDB)
    I did the setup via System Administration, System Configuration, Knowledge Management, Content Management, Repository Managers, CM Repository.
    It said it was created successfully but when I go into System Administration, System Configuration, Knowledge Management and then click on the link for "Repositories" (in the 3rd level navigation) it does not show up?
    I restarted the service and still no luck...
    How do I troubleshoot this???  I am not sure where to begin.  Please be very detailed as this stuff is new to me.
    Thanks,
    Tom

    I tried that and still no luck.  Here is the interesting thing:
    - If I change the DataBase mode to "DB", I get a green light in the monitor and it shows up properly within the Repository.
    - If I change the Database mode to "FSDB, I get a Red light in the monitor and it shows and incorrect path
          "Startup Error: could not create directory:
    172.xx.x.xx\folders\Root\Versions\versions"
          My actual path for "Root Directory" is "//172.xx.x.xx/folders/Root"
          The IP address is correct but where is the rest of this path coming from???
    - If I change the Database mode to DBFS, I get a Red light in the monitor and it shows an incorrect path
          "Startup Error: folder
    172.xx.x.xx\folders\Root does not exist"
          My actual path for "Root Directory" is "//172.xx.x.xx/folders/Root"
          The folder does actually exist.
    So confused...

  • Navigation Panel not showing up the links

    Good Afternoon SAP Experts,
    After applying support package 20, portal is not showing the links on navigation panel when accessed by an regular user. However, if you access portal with a super admin user the links appears.
    It's important to say that this is occuring just on Default Framework (We also have the Light Framework running and it works well). We already checked the roles, worksets, pages and iViews permissions and couldnt found any problem. We checked also the frameworks, and it's everything ok.
    Some important items:
    - We have a customized default framework page.
    - We have a custom theme.
    - The issue is happening with the customized components, however we did the tests on the standard components and the same error occurred.
    My System:
    J2EE Engine 6.40 PatchLevel 108290.313
    Portal 6.0.20.0.0
    Does anyone can help me to find a solution or already experiencied something like this?
    Thanks so much,
    Armando Martines Neto
    Edited by: Armando Martines Neto on Jan 23, 2008 5:48 PM

    More information,
    Today I Replaced the .par files : com.sap.portal.navigation.detailedtree and com.sap.portal.layouts.framework restarted the server but the problem istill happening. also I created a new desktop with new theme and framework (all copied from standard) ... but the navigation panel still not showing the links. any suggestion?

  • What does the message could not locate the dynamic link library SQlite.dll

    Every time I restart my computer I get the message from AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll. What does this mean and how can I elimanate it?

    Try using one of the following Apple documents to completely remove iTunes and the related components (especially the stuff mentioned in the common files folder).
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    If that doesn't work, try the suggestion in this thread -> AppleSyncNotifier.exe - Entry Point Not Found

  • Stabilizing not working with Dynamic Link

    So, here's the steps:
    1) Right click clip in premiere
    2) Select 'Replace with after effects comp...'
    3) In AE i click 'Stabilize Motion'
    4) Select motion source 'cu_1.mpeg' the only video track
    5) Check 'Position' and 'Rotation'
    6) Setup my two tracking points
    7) Click 'Analyze Forward' button
    8) When analyzing is done i click 'Apply'
    At this point the clip is stabilized. 
    9) Click 'Save' and return to premiere
    This is where the problem is.  Premiere sees the linked AE comp but doesn't do all the stabilizing.  From what i can tell it's doing the anchor point but ignoring the rotation in the AE comp.  I think this because i do see the edge of the frame moving around like it's doing some stabilization.
    The clip is fine if I pre-render the AE comp.
    Any ideas?
    Thanks,
    p

    quote:
    Originally posted by:
    DwayneHeronimo But when I try to enbed the font or
    setting embedFonts = true the text just disappears.
    It's not enough to just type : embedFonts = true.. You have
    to link also your fonts to be included in the produced flash - but
    be careful. It will increase enough your swf 's file size,
    depending the sets of fonts you enter!
    The only secure way I have found to do it, using and other
    languages characters, is to create a movieclip inside the first
    frame of my file, containing dynamic texts with all types fonts
    that I am using in my application (i.e. Myriad Pro, Myriad Pro
    Bold, Myriad Pro Italic.. etc). I type on those texts just a dot,
    and I embed them via Flash CS3 enviroment my fonts. Then I make the
    movieclip Invisible.
    If you want an example check this one:
    http://www.sp7.gr/adobe_forum_data/04_EmbedFonts.zip
    Due to embed fonts, the size of swf is ~180KB, although it
    displays just a fading text....!

  • AF comp not showing as rendered on Time-line in PrePro (CS5)

    I made a simple animated text in a video in After Effects CS5 and rendered it before importing it into a Premiere Pro CS5 project. The clip plays fine but remains Red (line) on the Time-line. Is that something of concern? I’m new to AF and have a bit more time working with PrePro so that's why I imported the AF comp into PrePro. I know that's a backwards method using the two programs that way.

    Hi Frank,
    I would appreciate if you could provide a code snippet for your suggestion.
    Isn't the following code already doing what you suggested:
    yesNoListComponent.setValue(myValueObject.getYnFieldValue());
    (given the fact that "yesNoListComponent" is a non-static field in my managed bean)
    Are you suggesting I should do an explicit :
    myManagedBean.getYesNoListComponent.setValue(myValueObject.getYnFieldValue());
    Also in the jspx,
    I am not sure what else I could do other than the following snippet to make sure the managedbean.yesNoListComponent value is picked up by the view
    <af:selectOneChoice binding="#{myManagedBean.yesNoListComponent}">
    <f:selectItems value="#{myManagedBean.yesNoList}"/>
    </af:selectOneChoice>
    Sorry I am just revisiting this problem after switching to Spring MVC at my day-time job, so my JSF concepts are rusting out a little bit..may be I am just not getting something too obvious.. please provide some snippet showing what you are suggesting..

Maybe you are looking for