AE connecting to Internet OK, but not connecting to networked server
Hi everyone --
I'm the lone Mac user in a Windows environment, and today I implemented an AE as a base station for wireless connectivity.
Before, I had our ethernet cable plugged into the back of my Mac mini. With it, I could access both the Internet as well as our Windows 2000-based server on our network. The volumes on the server would show up in the Finder when I would see what networks were available. All was good and (almost) as it should be.
I installed the AE and connected the ethernet cable to it. After running the AirPort Utility, I have wonderful internet connectivity, but I can no longer connect to our office server. I've looked through the FAQs here and through the discussions but didn't stumble across anything.
Can anyone tell me what I'm missing here? Many thanks in advance!
WLWEsq
You need to disable the router built into the Airport Express, and enable "bridge mode". To do this, run the Airport Utility, and click "Manual Setup". Click on the Internet button, select the "Internet Connection" tab, and next to "Connection Sharing" select "Bridge Mode". Update settings to your Airport Express. That should do it.
Similar Messages
-
Cisco vpn 5.0.07.0440-k9 connected but not access remote network from Windows 8.1 pro
I am using Cisco vpn 5.0.07.0440-k9 and Cisco vpn 5.0.07.0290-k9 both version on our windows 8.1 pro laptop.
VPN successfully connected but not access remote network and not getting ping.
But when i am try through wifi then vpn good work.
Please help me as soon as possible.
Thanks
SanjibHello Karthik,
I am using "MTS usb wifi" device and connect vpn through wifi Its working good the same win8.1 pro. But when i am try to connect VPN through LAN/Wired or USB modem (Like: Vodafone,MTS and others) its not working.
I am using Easy vpn on Cisco RV325 router in our office. Same VPN client is very good working in Windows 7 SP1 and Windows XP SP3.
Thanks
Sanjib -
Bought an ipad 2 for christmas but it won't connect to my wireless. My modem/router is an Arris 653 B eurospec DOCSIS. The wifi works on an unsecured network I have in the bldg but not my own network. Anyone have any suggestions?
I'm not familiar with your router but are there any buttons on the front or back of it because sometimes you need to pair the router in order for your PC, laptop, phone or iPad to connect wirelessly with it?
From the routers I have used there are normally two buttons on the front or back (apart from the power button), pressing one of them allows you a few minutes to enter the required password on your iPad. Best look at the instructions for the router. -
Microsoft adcenter ad titles appear in internet explorer but not in firefox in English
Microsoft adcenter ad titles appear in internet explorer but not in firefox in English
Tried Microsoft help but so far unable to identify problem.
Thought it might be connected to java but removal of java makes no difference
Starting in safe mode resolves problem but about 500 add ons suspectedIf it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
See [[Troubleshooting extensions and themes]]
* If you have many extensions then you can first enable half of the extensions to test which half has the problem.
Continue to divide the bad half that still has the issue until you find which one is causing it. -
Photos on craig's list show up using Internet Explorer, but not with Firefox....how can I fix this?
Photos from craig's list show up on Internet Explorer but not on Firefox....how can I fix this?
Try this css for the image: https://hacks.mozilla.org/2009/06/moz-box-shadow/
-
The Header in my home page is truncated. My home page Header is cut off. The header appears in Internet Explorer, but not in Mozilla Firefox 3.6.13. How do make the header display?
(Images or animations do not show) worked well.
-
Dispatcher running but not connecd to message server
hi..
iam trying to start my server, in process list iam getting dispatcher is not getting start.first iam getting 'DISPATCHER IS RUNNING BUT NOT CONNETED TO MESSAGE SERVER' it is in yellow color, after some time , it is changing to green color but the message is ' MESSAGE SERVER IS OK BUT DIALOG QUEUE IS STAND STILL' afere some time its getting stop.
can any one help me pls what is the problem?thanku for your advise..
ok.. the following the are developer traces for 0,1,2.
0.
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Jul 11 16:54:32 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 4872
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4872) [dpxxdisp.c 1016]
I MtxInit: -2 0 0
X
X Wed Jul 11 16:54:33 2007
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Wed Jul 11 16:54:39 2007
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server pandu_DEV_00 on host pandu (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Wed Jul 11 16:54:39 2007
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4872) [dpnttool.c 345]
1.
trc file: "dev_w1", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Jul 11 16:54:35 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
M
M Wed Jul 11 16:54:36 2007
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 4244
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 1 4244) [dpxxdisp.c 1016]
I MtxInit: -2 0 0
X
X Wed Jul 11 16:54:37 2007
X EmInit: MmSetImplementation( 2 ).
X <ES> client 1 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Wed Jul 11 16:54:39 2007
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 1
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server pandu_DEV_00 on host pandu (wp 1)
M * ERROR tskh_init: db_connect
M *
M * TIME Wed Jul 11 16:54:39 2007
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B dbtbxbuf: Buffer TBX_SINGLE not available
M ***LOG Q02=> wp_halt, WPStop (Workproc 1 4244) [dpnttool.c 345]
2.
trc file: "dev_w2", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Jul 11 16:54:37 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 5888
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 2 5888) [dpxxdisp.c 1016]
I
I Wed Jul 11 16:54:39 2007
I MtxInit: -2 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 2 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Wed Jul 11 16:54:40 2007
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 2
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server pandu_DEV_00 on host pandu (wp 2)
M * ERROR tskh_init: db_connect
M *
M * TIME Wed Jul 11 16:54:40 2007
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 2 5888) [dpnttool.c 345] -
Disp+work.exe is running but not conneceted to message server
Hi All
disp+work.exe is running but not conneceted to message server
Regards
BlueHi,
Did you tried restarting the server ?
is there any error related to the shared memory ?
I suggest you to restart and check ..if still no luck..
better post the query in SAP Basis Forum with all the dump you are getting ..you willget quicker responses..
HTH
Rajesh -
'DISPATCHER IS RUNNING BUT NOT CONNETED TO MESSAGE SERVER'
hi..
iam trying to start my server, in process list iam getting dispatcher is not getting start.first iam getting 'DISPATCHER IS RUNNING BUT NOT CONNETED TO MESSAGE SERVER' it is in yellow color, after some time , it is changing to green color but the message is ' MESSAGE SERVER IS OK BUT DIALOG QUEUE IS STAND STILL' afere some time its getting stop.
can any one help me pls what is the problem?Dear friend
Your database is notworking
shailesh Tiwari -
Is it possible to connect an iMac to the internet but not to the network?
Hello,
I volunteered to purchase an iMac for our company. This huge company maintains a huge windows-only network environment and IT does not support any macs (nor do they want to have them on the network).
Hence, since we really need this machine to be a mac and not a PC I had to promise to set it up as a stand-alone machine and to get anti-virus protection (as users will be coming in with their jump drives etc). At least for the latter reason (regular updates of virus definitions must be possible) we'd like to have it connected to the internet.
How would I escape the dilemma that as soon as I'd hook it up via ethernet, it would of course get internet but at the same time would see all other machines on the network? (it will sure do so as I had tried it out with some other machine running on the same OS)
Is there a way to configure Snow Leopard to allow for internet but not network access?
Does it make sense at all (for security reasons that is)?
thank you very much,
HDIs there a way to configure Snow Leopard to allow for internet but not network access?
Well, 'internet' is 'network access' so at one level your question makes no sense.
If, on the other hand, what you want to do is segregate your Mac from the other machines then that's a different issue. There are numerous ways of doing that, but most would involve some level of interaction with the network administrators. Given their ana^H^H^H attitude towards Macs that may be an issue.
The best way would be to setup a separate VLAN for the Mac. This will create a separate logical network within the company network with only this Mac and the network router in it. No PC would see the Mac, and the Mac wouldn't be scarred by seeing all those PCs. This cannot be done without buy-in from the network admins, though.
A step down from that would be to use one PC in the network as a gateway to the rest of the network. The Mac would talk to this PC, and the PC would pass the data out to the rest of the network. This would require admin rights on the PC, though, which you may or may not have (I've seen a lot of corporate networks… :: shudder ::)
The last option would be to setup an entirely separate internet connection for the Mac but there are logistical issues there, too.
My advice: Buy a dozen Krispy Kremes for the network guys and sweet talk them into building you a VLAN. -
Can connect to router but not ad hoc network. Works fine with iPhone.
My brand new ipad on ios 3.2.2 connects fine to my router and my jailbroken iphone running Mywi. However, I cant connect to an ad hoc network set up on my laptop running vista. My iphone connects to the ad hoc without any problems. I've tried everything, static ips, wep, wpa, hard resets, restoring, resetting network settings but no go. How can' everything else be fine but not connecting to the ad hoc network, especially since it works fine to connect with the iphone?
Btw, the ad hoc is for controlling music software on the laptop through wifi. It's not for getting internet.
Can anyone shed some light on this?
Many thanks,
LHi and welcome to the Apple Discussions.
Did you try doing a search, upper right corner of this window, on remote control? There have been a number of discussions during the last two weeks about remote control problems.
There have also been discussions about networking an iPad via another computer, such as iMac or MacBook Pro, using the computer's wireless card rather than a router.
See if one of those will answer your question. -
I can gain access to my bb&t banking account on Internet Explorer but when I try to enter the same website on FireFox the following message appears:
Service Unavailable
The server is temporarily unable to service your request.
Explanation
The server is unable to service a request because a needed resource is unavailable.
Solution
Please try again later.Hi, I have the same problem, but I have been using firefox 10 for some time. Everything worked well until 3 days ago, when I could not access my internet banking account. As above, I got a service unavailable message from my bank.
I can connect with internet explorer and safari. I have removed firefox 10 and reinstalled it, but still can not access my bank.
Any ideas -
Why does my Web Handler work with Internet Explorer, but not with Firefox
I am trying to develop a web page that uses the Simile Timeline (http://code.google.com/p/simile-widgets/wiki/Timeline) with data from SQL Server.
In initial testing of my timeline I tested it with Example.xml, a static XML file in the correct format to be event data. I wrote the following in the appropriate place within mytimeline's Javascript: -
var WebHandler = "Example.xml"
tl.loadXML(WebHandler, function (xml, url) { eventSourceFamily.loadXML(xml, url) });
This worked fine with both Firefox and Internet Explorer. I then changed the assignment to
var WebHandler = "GDBTimeline.ashx?Type=Family&Userid=" + getControlValue("input", "hdnUser");
so that invoked a web handler that could look up the SQL database and return the XML that I wanted, and wrote this web handler.
This works perfectly with Internet Explorer, but with FireFox the timeline band is blank. Yet when I examine the http traffic with Fiddler2 (http://www.fiddler2.com/fiddler2/) I see that with either browser there is a response from URL
/GDB_pages/GDBTimeline.ashx?Type=Family&Userid=robertb
that returns the XML that it is supposed to.
I have previously used web handlers with Firefox before, with no problems. The Fiddler results conclusively show that the web handler is invoked, and returns the appropriate XML, and this XML is identical to the XML from the static test with Example.xml.
Where do I start looking for answers? I don't even know if this is a Simile problem, a Firefox problem, or an ASP.NET problem.
Thank you, Robert.Problem solved. The issue: Content Type was not correct.
Visual Studio creates the web handler with dummy code like this: -
Public Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequest
context.Response.ContentType = "text/plain"
context.Response.Write("Hello World")
End Sub
I wrote a database query that set a string variable to the XML I wanted: -
Public Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequest
Dim Outstring as string
' my logic to fill Outstring with XML
context.Response.ContentType = "text/plain"
context.Response.Write(Outstring)
End Sub
This works with Internet Explorer. However it's not strictly correct: to make it work with other browsers as well,
context.Response.ContentType = "text/plain"
should be
context.Response.ContentType = "text/xml"
It now works with IE, FF, and Chrome, and presumably all others. -
Symbols show up in Internet Explorer but not Firefox, how do I fix this?
Symbols like ♡ or ★ (both of which I copy and pasted and can't see at all, they are just empty spaces without hex codes). I've installed the dejavu and symbola fonts but most symbols still do not show up. I tried checking on Internet Explorer and they show up there but not on Firefox, is there some way to fix this? Thank you.
Having this problem too. I just purchased a new laptop 2-3 weeks ago: Windows 7, 64-bit, currently running FF 7.0.1. Both IE9 and Chrome display with no trouble.
http://en.wikipedia.org/wiki/List_of_Unicode_characters
Most of the language tables are fine and the hex code boxes show up like they should for fonts I don't have versus just being blank. I see a TON of blank cells once I get to the Mathematical Operators table (~20% filled). Geometric Shapes is pretty sparse and there's almost nothing in Dingbats. I've verified that these are not blank in other browsers.
Is this likely a FF7 bug? My previous laptop had no issues displaying these characters and I don't think I had updated from FF6 before switching to the new laptop. -
There is a task bar that should be visible so you can expand the viewer to the full size of your computer screen. I can open up internet explorer and it works, but not in FireFox. This is when using ESPN3, or ESPNWATCH.
A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.
The helpers at that forum are more knowledgeable about web development issues.
You need to register at the mozillaZine forum site in order to post at that forum.
See http://forums.mozillazine.org/viewforum.php?f=25
You need to post a link to the website or post relevant parts of the code. -
Epson artison 810 wireless printing works with internet explorer, but not mozilla
New printer. I can print web pages with internet explorer, but when I use mozilla nothing happens.
See this: <br />
[http://kb.mozillazine.org/Problems_printing_web_pages]
Maybe you are looking for
-
Error While Importing MIF File
Product: Unstructured FrameMaker version 7.0p579<br /><br />I'm learning MIF and need to create MIF files that contain tables. As a base, I'm using the table.mif file that is in the samples\mif directory in the Frame installation folder.<br /><br />I
-
ITunes Charged me 9 times for 1 purchase and Support has not resolved it
iTunes charged me 9 times for a single transaction and I'm getting no where in getting it resolved. Nov 21, 2005: Purchased Season 2 of Lost (videos) for $13.93 Nov 21-22 2005: Was charged over and over again, totaling 9 times for the single purchase
-
During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation. "An Error occured during intstallation of Assembly "Microsoft .VC80.CRT type="win32". version="8.0.50727,6195", public Key Token="1fc8b3b
-
Import contacts to address book via csv?
My problem is that I follow the import directions for a .csv text file, set it up to import everything to the correct field, and click "ok." Nothing happens - no error message, nothing at all. I've tried several suggestions in these forums - deleting
-
Collecting user login counts hourly, daily, weekly
I've been tasked to collect user login counts (hourly, daily, weekly) at each of our iMacs here in our computer lab (there's 25 iMacs). I've got Remote Desktop installed here on my workstation, and I KNOW there's a way to do it; is that a built-in fe