AE crashed and locked me out of my project - THANK YOU ADOBE
I was using dynamic link at the time, not sure if that had anything to do with it but i guess when you try to make two flaky programs work together this sort of thing is bound to happen. Well, time to start from scratch.Hey, now theres a product suggestion todd, you think if i suggest "rewrite all of adobes software from scratch, but this time using competent programmers" that they'll go for it? How many millions of dollars did adobe dump into the development/hostiletakeover of AE's code anyways?
I suggest you pull yourself together and stop running off with your mouth. So far each and every posting of yours has been on the edge of a rant or been one right away. Given, that you admitted yourself to be using the program for only for a short while, I find that more than odd that you blame specific tools and features, when your inexperience is just as much part of the problem. This strikes me as yet another one of these cases. Now it's impossible to even see what's going on, since you don't bother to provide any info about your system, what footages you used, what your steps were when initiating the DL connection etc.., which is another of those things... I know losing work sucks, but it happens and that's why people use versions and backups and that - once more - is fully in your hands. I will quietly bow out of this thread before this turns into yet another of those furball threads I'm so tired off, but maybe someone here might find it in his heart to still help you, regardless of your rude and insulting behavior...
Mylenium
Similar Messages
-
I have been experiencing crashes and lock-ups in Premiere CS4.
Last week I was running Encore to burn a DVD and when I noticed the processor was running flat out. I decided to run Core Temp to check the temperatures. At that point my encoding stopped and Encore locked up.
Now I usually have Core Temp start when I load Windows. I have now disabled it and when I ran Premiere last night guess what? No lock-ups. Now this is early days but I suspect Core Temp might be the problem. I hope so. I'll report back with my findings when I have had more time to experiment.
PS I'm running Windows XP SP3, Quad Core 6600 and 4Gb RAM
Cheers,
TimYou posted near the end of a similar thread in the CS5 forum. I branched your post into a new topic and moved it here to this forum. My post #1 was a request to be more careful where you post.
If you want to see where you originally posted, click on the word "thread" in the phrase "Branched from an earlier thread", located at the top of the post list.
-Jeff -
just installed latest update about a week ago and now it crashes and locks up 30 times a day. Help
I get the same problem only it's not 30 times a day. I can't remember exactly what it was I was doing it first happened but it scared the **** out of me.
Since then I do remember it's happened most often when I'm removing recently opened apps from the multitask tray.
I don't think it's a particular app that does it but it might be that I'm clicking on one after the other in quick succession but I can't saw for sure.
I can't say for how long it lasts either but it seems like forever yet it might be about 2-3 mins. -
How do I get into my if app? It says it's locked and when I put i my apple password it tells me it is to valid and locks me out. I tell it to repair it and it still doesn't work. I never changed it and I assume it should be the same as my apple password. Can some one please help me?
With the amount of information you've provided it's impossible to offer a solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
did you apply any updates or upgrades just prior to the problem occurring?
what is the exact message? A screenshot of the message window would suffice.
what fixes have you tried?
where is your library located?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive? -
Firefox crashed and subsequently wiped out my history - need ideas on how to retrieve history!
*Mac 10.6.6
*Firefox preferences always set to "remember history"
*Before crash and history wipe-out, I had just:
- been updating to iCal beta from apple.comThen your address book cannot be restored. You might be able to reconstruct it to some point, based on your existing e-mail messages.
There is an [https://addons.mozilla.org/nl/thunderbird/addon/email-address-crawler address crawler add-on] for Thunderbird, but it was not tested with the latest version and might not install. You could try this, however getting this to work with the latest version may need help from the author.
Maybe you could temporarily install an older version of Thunderbird, as suggested by one of the commenters of the add-on.
Addons are not supported by Mozilla directly, but the author might be able to help you with it.
Hope this helps you further, maybe a technical person near you might be able to help you out locally? -
Adobe Flash Player 11.7.700.202 keeps crashing and locking up my PC.
Adobe Flash player keeps crashing and locking up my PC. Can I go back to an earlier version.
Yes, please see these faqs for details:
How do I report a Flash Player crash to Adobe?
How do I revert to a previous version of Flash Player? -
i know my password for my ipod. but the ipod touch fourth generation i have my brother tried a lot of codes and locked me out of it. how do i do a hard reset on it?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My original note application is always crashed and i can't open it. Can you help me please??? Urgent
CLOSE FROZEN APPS
Hold the sleep button until ON/OFF slider appears. Let go of sleep button and ignore slider and then hold home button until the app closes
Then do this
RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost). -
hey every one ,i bought a new ipad 2 last month,i am not using it so much but sometimes it does respond,hang's up,all games and app come out of there folder . can you plz help me.my email id is [email protected]
Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.
Don't leave your email address on a public forum -
Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.
Try this:
clone your system and repair it with Disk Warrior instead
Or try a clean test system install on another drive
A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
Try to run w/o externals. MyBook included.
Is that a 7200.11 1TB? they had a lot of issues.
Run AHT off your OEM DVD.
2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current. Hopefully you have a UPS and is 1500VA unit.
When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
TimeMachine has its own bad habits, especially with Green drives and some externals.
Try to rule out everything and then add back one at a time.
And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old. Might want ATI 5870 or 5770. -
When I import the ppt, why do you always import error out of memory? Thank you!
When I import the ppt, why do you always import error out of memory? Thank you!
> We are getting an error (about the error - system say out of memory) and when we referred to the messages in the SAP BPC forum, few have provided solution asking to shrink the log file size.
> They have also provided the SQL synatx to reduce the log file size.
> " dbcc shrinkfile (Appset_Log, 1) " -
This is for Microsoft SQL Server, not for Oracle.
If you get "out of memory" it's not a database logfile problem but a memory problem.
> Exact Error message - out of memory (Pop-up screen - no other information available)
When is this happening?
And do not post the same question in different forums:
SAP BPC Netweaver and error message (SQL)
Markus -
I updated to 3.6.15 and every time I open Firefox the Thank You for upgrading window pops up along with my normal homepage. How do I get rid of that?
This link shows how to do that - https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
-
My Mac has suddenly stopped playing my DVDs including a DVD it played fine only 3 days ago. I insert the DVD and wait for the player to start automatically but after 10 minutes, nothing is happening and it sounds like the disk has stopped spinning. I've now tried with four different DVDs (all store bought and so perfectly normal disks). The Mac doesn't eject the disk or anything it just doesn't seem to respond to it being there at all.
My main confusion is why this suddenly happened today when it was perfectly fine last week.
Does anyone have any idea what could be wrong and how I could fix it? Thank you.
JinxeWelcome to the Apple Support Communities
See "The drive accepts discs but they do not mount or are automatically ejected" > http://support.apple.com/kb/HT2801 -
I'm a Microsoft Outlook for Mac user, I need information of how to know when e-mail was readed and confirm receipt of e-mails sent. thank you! regards Mauricio
Mail and Address book
-
I'm trying to use Dictation. Where does the text go, and how can I retrieve it? Thank you.
You dictate after you open a blank page in any text editor. The text goes on the page.
You can use Text Edit for example (in your applications folder).
With the blank page open, go to the Edit menu and select Start Dictation. When you are finished, you save the file as you would any other document. You can retrieve it, edit it or anything else you want, because it is a file like any other you create with that text editor.
Maybe you are looking for
-
I tried, but ... Mac Network & Win-7 PC
OK, I start with "I Know..." look thru old posts to find answers....... Just Spent last 4 Hours doing that. I understand how frustrating it can be to keep answering the same questions (Really Do) but a Great Fix for that would be finding Some Way to
-
How can I prevent NULLs from appearing in my HyperTrend graph when restarting DSC engine?
I am continuously logging data to a citadel database using DSC 7.0. Occasionally I need to restart the DSC engine because of a computer reboot, changes to SCF file, etc. Whenever I do this, and then review the data in HDV or with a HyperTrend graph i
-
Yeah, so I just had to reset my iTunes password, and iTunes is new because I just got a new computer. Everytime I try to sign in on iTunes, it has an error message that says I need to review my account.. I didn't get any e-mails with a link on how to
-
How to write the code to insert into attendance table
Hi, I have a report class lov (through which all the classes will be selected). once any class seleted from the list it will display all the students in the class my query in the report was SELECT FIRST_NAME || ' ' || SURNAME "Pupil_Name", er.pupil_n
-
I have an iPhone 3GS with IOS 5.0.software. When I first set up iCloud, photos streaming worked. I was trying to delete some photos from the Photo Streaming folder on my iPhone and I deleted them from the Photo Streaming folder on my computer, but