AE CS3 can't render to FLV

I have Flash CS3 purchased and installed and I'm using a trial of After Effects CS3 to try to make an FLV with cue points.
The problem is that when I add my project to the render queue, I find that the option to render to Adobe Flash FLV format is not in the drop down list.
Can someone tell me why?

I think those are extra encoders that aren't included in the demo. Have you tried File > Export > FLV?

Similar Messages

HELP ! Can't render 1080x1920 FLV in AE CS5

Hello
I'm trying to render an HD clip at 1080 x 1920 FLV. Its for a 42" HD monitor that will be displayed like a portrait. Everytime I try to render it has constraints and I can only do 1080x 1080. Is there a possible way around this? I even tried rendering it as an avi and opening it up in Premier as well as Adobe Media Encoder, NO such luck..
Please help! Thank you..

This animation is for a normal monitor that will be rotated 90 degrees, correct? You don't want 1080x1920, you want 1920x1080.
It's certainly possible to work in a 1080x1920 comp to make life easier on yourself, but eventually the video will be 1920x1080.
You'll need to find out if they're rotating the monitor clockwise or counterclockwise, nest your work in a 1920x1080 comp, and rotate the nested comp appropriately.

Dreamweaver CS3 Can't Render My Fancy-Pants CSS

Hi everybody,
My company does CSS/XHTML design. I think we do pretty good
stuff— of course we're still learning, but we do OK. We're
currently in the midst of a site redesign for Haverford College,
and this time we're going all the way: pure CSS, tableless, XHTML
strict if we can manage it.
I have used DW MX 2004 since, um, 2003, and have had no
reason to upgrade. But now that we're doing pure CSS layouts, they
tend to show up wonky in MX 2004, so I'm planning to upgrade to
CS3. I am working with the trial version now, and I'll be damned if
the display of the site isn't WORSE than it is in MX 2004.
This wouldn't be a big deal, as I usually work in the code
anyway, but DW CS3 is about to be approved by the client as the
standard method of having administrators do site updates. This
means every admin at Haverford's going to open up their page, look
at this, go "oh, no, my site's b0rked," and try to fix it. Disaster
will ensue.
Here is the evidence.
The home page is browsable at
http://haverford.demo.babywhale.net/.
As you can see, it validates (transitional for now, as
there's some mockup content in there). It also looks consistent
across FF, Safari, and IE6 and 7. (We'll look at other browsers
later in the dev process.)
Now check out how horribly screwed up it looks in DW CS3:
http://www.whitewhale.net/screenshot/dw.png
http://www.whitewhale.net/screenshot/scroll_to_right.png
We are doing some sort-of-fancy float-based layout in there,
but man, if IE6 can read it, why can't Dreamweaver?
Can anyone offer any advice? I'm starting to sweat this one a
little. I figure my options are either (a) go back to a table,
which would cause at least one of my employees to quit in protest;
or (b) spend a lot of time tweaking the CSS so that it shows up
properly in DW, which would be the most annoying
browser-compatibility debug EVER; or (c) create a bunch of
DW-specific tools (like design-time stylesheets, and so forth)
meaning that the admins would have to do a lot of custom
configuration along with the DW CS3 install. Or (d) tell the client
we have to find another solution besides DW because of our fancy
layout, which they're certainly not going to be happy with.
OK, I've blabbed long enough. If anyone has any ideas,
similar experiences, or suggestions about which of the preceding 3
options I should go for, please let me know. Thanks!
Jason

Jason,
> I figure my options are either (a) go back to a table,
which would cause at
> least one of my employees to quit in protest; or (b)
spend a lot of time tweaking
> the CSS so that it shows up properly in DW, which would
be the most annoying
> browser-compatibility debug EVER; or (c) create a bunch
of DW-specific tools
> (like design-time stylesheets, and so forth) meaning
that the admins would have
> to do a lot of custom configuration along with the DW
CS3 install. Or (d) tell
> the client we have to find another solution besides DW
because of our fancy
> layout, which they're certainly not going to be happy
with.
Another option:
(e) Turn off CSS Style Rendering in DW Design View:
View > Style Rendering > Display Styles
Also available on a toolbar:
View > Toolbars > Style Rendering
This gives you a view of the semantic structure of your page
which is
fully editable.
Hope this helps,
Randy

AE cs3 can't render or ram preview

I have a 5 sec text animation and AE can't export it or ram preview it. I have a 2.2Gz Pc, 2G ram. I export standard DV its ok but when exported a complex text animation it can't preview. It asks me to change things..I don't know what the problem is. Anyhow, I am thinking to get a new computer PC with 6G of memory. I don't know if that would help or improve so I can make complex HD effects etc...in AE. Any help would be appreciated.

This may sound crazy. But sometimes when I hit a bug like this I precompose the whole thing and then it works. Hope that helps.

How can I render an active link (yrl) within a UIX/XML page

How can I render an active link (url) within a UIX/XML page.
How can I get <jbo:ShowValue> to work in UIX/XML, or is there another way?
Bill G...

It may seem strange, but the <contents> of <rawText> aren't actually
raw - it's only the "text" attribute that's raw. (It seems strange because
it is. Ah well.) This is different from UIX JSP.
So, try something like the following:
<bc4j:attrScope name="Notes">
<contents>
<rawText text="<a href=""/>
<rawText>
<boundAttribute name="text">
<bc4j:attrProperty name="value"/>
</boundAttribute>
</rawText text="">"/>
Some text in the link.
<rawText text="</a>"/>
</contents>
<bc4j:attrScope>
Thankfully, this will be much simpler in 9.0.3, when the following
will work:
<link text="Whatever you want">
<boundAttribute name="destination">
<bc4j:attrValue name="Notes"/>
</boundAttribute>
</link>

Can Lightroom render 1:1 Previews when importing my Photos?

Q: Can Lightroom render 1:1 Previews when importing my Photos?
FAQ revised 25 April 2009
Ans: Prior to version 1.3 Lightroom did not support 1:1 preview rendering during import, the actual options for Initial Previews being: Embedded or Standard. However, more recent versions allow four types of previews to be rendered during import (i.e. Minimal, Embedded & Sidecar, Standard,and 1:1). It's also worth noting the following on Lightroom import behaviour:
1. Minimal (Lightroom default) or Embedded & Sidecar is by far the quickest method for getting your photos into the Lightroom catalog. However, the lack of Standard, which is the minimum that Lightroom can actually work with, means that the application will render standard-sized on demand (i.e. as thumbs/photos become visible within the photo Content area). Asking Lightroom to undertake this task at the same time as you're trying to use the application will result in sub optimal performance.
2. Importing your photos with the Standard preview selected within the Import dialog will take longer than 1 above, but on completion Lightroom will already have previews that match the minimum requirement for working in the Library. Assuming that you won't be looking at every image at 100% (i.e 1:1) then this preview size will allow you to quickly review, rate, label, even make quick colour/tone adjustments, etc the photos within the Library module. If you need to see a photo at 100% then Lightroom will render that preview on demand (while it's being rendered you'll see the "Rendering Preview" overlay appear at bottom of preview). Note that when using a 23" or larger monitor it to is best to set the Standard sized previews so that they are rendered at 2048 pixels
3. Importing your photos with the 1:1 preview size selected will result in Lightroom taking even longer to complete the import process than would have been the case if standard-sized had been chosen. 1:1 previews also take up significantly more disk space than standard-sized.
If you're not going to be working on the photos immediately after import but do need to get them into Lightroom as quickly as possible, then the best option would be to choose import option 1. Once the photos have been imported choose either Render Standard-sized Previews or Render 1:1 previews from Library module Library>Previews menu.

When I search these forums for "CFCopyFormattingDescription", I find a bunch of crash reports posted that look almost exactly the same as mine. It appears there's a bug in iPhoto, perhaps when reading metadata from the JPG file (readRawTiffPropsFromPath).
Interestingly, the Preview app can open and display the file just fine. I even opened the inspector and it showed all of the TIFF and exif metadata just fine, no crash. The file also opens just fine on Windows.
Now how do we get the attention of the iPhoto development team so I can send them the photos, have them reproduce the crash, and fix it?

Adobe Media Encoder can´t render out AE Ray-Trace Composition

Hey,
AME can´t render out my composition (or sequence if i include the comp in a PP sequence) which includes some 3D stuff.
I am able to render it out in AE in a few minutes, preview it easily in AE and even in PP but i´m not able to render it out in AME or PP.
AME says it would take like 10+ Hours to render it and doesn´t come to an end.
I tried multiple encoding settings but nothing worked.
Also i checked, that cuda rendering is enabled in all my Adobe programs, but nothing helped...
AE File .aep :
Dropbox - Twitch Infovideo.aep
AME .epr Preset for encoding :
Dropbox - Media Encoder Error Test.epr
Thanks for helping,
Johannes

It raises another question: what settings do I need to encode the comp in 720p resolution without taking up lots of space?
Well, it depends on whether you need a production master (something for broadcast, for example, or to use as a source for other encoding tasks) or if you want a version for distribution. If it's the former, there's nothing wrong with "lots of space" - A Quicktime file with PNG or Animation codec is a good idea, but it will take a lot of space. If it's the latter, H264 is perfect but there's no built-in preset to take 720 material to the web.
You could do this:
* Pick the generic H264 template. You'll see that it will give an error if you attempt to render, because the default setting uses an H264 profile/level which doesn't let you use HD resolutions.
* In the H264 video options, set the "Profile" menu to "Main" and "Level" to 4.0. That will keep it compatible to Quicktime and Flash player, while allowing larger frame sizes and higher bit rates.
* Set Target Bitrate to 5-8 Mbps and Maximum Bitrate to 9-10 Mbps if you're targetting web delivery. That's a bit over what Apple uses for 720p content on the Apple TV, for example.
The H264 original preset will instruct you in the comment field to stretch to 640x480 in Output Module. There's no need, since you are using a profile/level combination which allows higher frame sizes.

I have update to FCP7 and now I can't export as FLV

Hi,
First sorry for my bad English, this is not my mother tongue.
My problem is the next,
In my PowerMac with FCP6, Flash8 Video Encoder, Flash8 and Quicktime Pro 7, I use to export without problem from FCP as FLV by File / using Quicktime conversion...
Now with my new MacPro with FC Studio (FCP7, etc) and with the upgrade to Adobe Creative Suite Master collection, I can't export as FLV directly from FCP.
Please do I need something else?
Export my videos to FLV files is something that I have to do all the time, almost the 90% of my production finish as FLV.
Any idea, plugin, codec or something??
Many thanks in advance

This might be of interest: http://discussions.apple.com/thread.jspa?threadID=2275890

Illustrator CS3 can't print/save as PDF

I installed CS3 and the error message:
"The Save as PDF and Save PDF as PostScript options in the Printer Dialog are not supported"
Does this mean that its not picking up on the Adobe Acrobat/Distiller 8?
How would I activate this? Help!!
Same thing with InDesign CS3, can't print/save as PDF.
(this is on a mac)

It may be looking for your RIP ppd, as well as Acrobat 8. Acrobat should have installed all the necessary files, but you might take a look into that. I don't think Distiller is part of the Save-As procedure. You might take a look into "Add-A-Printer" OSX option and select Acrobat 8 there ( although it should have loaded during the install ). Another option is re-install your printer's software and any RIP software ( if available ). Before you do, get whatever updates you can from the manufacturer. It could also mean, after you've done the previous suggestions, you correct permissions on your HD using Apple's Disk Utility. Leave the machine ON overnight so that the Apple Utilities can clean house while you're sleeping.

How can i render a dynamic html file in jsp page

Hi everybody,
i am trying to render a dynamic html file in jsp page with the result of querying a database.
The response of the query is a xml document. And i have a stylesheet to transfer it to html.
How can i render the html in a jsp file?

I am using below code for HTML files
private var appFile:String="index.html";
if (StageWebView.isSupported)
                    currentState = "normal";
                    webView.stage = stage;
                    webView.viewPort = new Rectangle( 10, 130, (stage.stageWidth)-20, 750 );
                    var fPath:String = new File(new File("app:/assets/html/aboutus/"+ appFile).nativePath).url;
                    webView.loadURL(fPath);
                    addEventListener(ViewNavigatorEvent.REMOVING,onRemove);
                else {
                    currentState = "unsupported";
                    lblSupport.text = "StageWebView feature not supported";
above code is working fine for me.

How can i render one facet in panel splitter based on conditions?

Jdeveloper Version - 11.1.1.5
How can i render one facet in panel splitter based on conditions?
Ex : In horizontal Panel splitter first facet - af table
second facet - af table
if any one table estimated row count is zero i nedd to render the respective facet?
is it possible?
Please help..
Thanks
sk

Yes you can do it but not on facet you can apply rendered attribute to the any of the child component of the facet.
Thanks
Raghav

Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

Yes, I know. I have been working with HDV for some time. I am wondering why it doesn't render when it needs to.. the red and bright-green lines are above, and I've set the render settings such that ANYTHING I highlight and hit apple-R will render. But its not rendering at all.

CS3 can not remember export location!!!

I can not believe that even this new version CS3 can not
remember the export location of slices. each export I need to
browse to my project folder. this was a known bug over all the
previous versions and it is still a huge bug!
Mic

If you're talking about the right-click functionality: You
have to go to File -> export, and then export to your desired
location first (you can even opt to "export selected slices only").
Then when you right click and "export selected slice" it'll
remember your location.
Fireworks has always been this way as long as I can remember.

Help! Sometimes Dreamweaver CS3 can't see my .css file

Once a day or so dreamweaver cs3 can't see my .css file. So
all my files that I am working with turn to poop. To fix I have to
close each file and re-open. Then my .css returns and all my files
are how they should be. Anyone else ever have this problem?

That I do not know - I've never looked. From the styles
panel, I do know that it does not completely disapear - it shows
the .css - just all the rules are missing. I will look next time.
Usually only happens when multiple files are open. Thanks

Can't render Themes in iMovier 6.0.3

I'm having problems with rendering Themes in iMovie 6.0.3.
I can create the Theme fine. But after I hit "Apply", the theme clip sits in the Clip viewer - complete with its little red "I'm rendering" line - for hours (and hours), apparently doing nothing.
I can't save the project without iMovie telling me there are still effects rendering, and that I need to discard the rendering to save the file. I can't render the Theme (because it appears to be in some kind of loop). I can't therefore edit m,y movier in the way I want - and my little daughter wanrts a DVD of her school play
After reading this forum, I removed Flip4Mac and also every other codec I could find on my iMac (I didn't have 3ivx but did have other DivX codecs). I've run plutil to try and find corrupted preference files. I've tried restarting. I've tried creating the Themes in different ways.
In short, everything I can think of, and the fecker still won't work!
Anyone got any bright ideas? iMovie is a flagship (and workhorse) Mac app surely - how on earth can it be barfing at doing something so straightforward?

Stuart, we've seen a number of reports here recently of problems with Ken Burns and Themes rendering after Migration Assistant is used on a new Mac to move files from an old Mac to a new one. Did you do that?
The problem affects all user accounts. The cause of the problem is still unknown.
http://discussions.apple.com/click.jspa?searchID=-1&messageID=4091548
http://discussions.apple.com/click.jspa?searchID=-1&messageID=4043811
The first thing to do, however, is to be absolutely certain you've removed all third-party QuickTime add-ons and iMovie plug-ins. They can be in one of several folders:
http://discussions.apple.com/message.jspa?messageID=4030731#4030731
Karl

AE CS3 can't render to FLV

Similar Messages

Maybe you are looking for