AE CS5 Hanging up on start up

I have a reoccuring problem with AE hanging up on startup. It seems to stop right when the program is going through the various folders that it is scanning and freezes up right when it gets to "Scanning Folder: 32_64bit". I have installed the Mac OS X 10.6.4 combo updater with no real improvement in it being able to get through start up. I did have a bit of luck when starting the program directly after I started Premier as an experiment when it opened in a snap. I am running it on a Mac 2 x3 GHz Dual Core Intel Xeon with 5 gigs of memory and as previously mentioned OS X 10.6.4. I have no firewalls running. Any suggestions?

No real idea, but this part here
I did have a bit of luck when starting the program directly after I started Premier as an experiment when it opened in a snap.
Would suggest the MediaCore or one of the services is busted. Since it works in Premiere, there may be a permission or other issue somewhere. Anyway, I would simply try to reinstall everything now that the update has been applied, but only after running the CS5 Clean Script/ Utility and manualyl deleting al linstalled files. Also run tools like OnyX to check your system status and fix potential problems.
Mylenium

Similar Messages

CS5 hangs trying to render near 3000x4000 PSD file

I have been trying to figure out what makes premiere cs5 hang when attempting to render photoshop file with 3000x4000 pixels. there are 3 tracks on the sequence(1920x1080 AVCHD).
video track 1 - looping background (1920x1080)
video2 - layer from photoshop files arranged in sequence with cross dissolves between clips
video3 - another layer from the same photohop file(s) on video2 also with cross dissolves between clips, same duration and beginning time with its corresponding layer in video2.
the PSDs vary in sizes from 15MB to 49 MB but all have the same 3000x4000 pixel dimensions with document sized 10 inches x 13.333 at 300 pixels/inch resolutions. I had to import psd layers separately and on different video tracks as they have different motions. But they are arranged to play simultaneous with same durations.
the sequence will mostly be in yellow, indicating that premiere thinks it can play the sequence in realtime and yes, it does, at least for most of the footages in yellow, altho those without colors(no red indicators present) tend to be sluggish at times,
The problem starts whenever I select "render entire work area". Once rendering comes to the frame that starts the cross-dissolve between 2 PSDs it just stops rendering and premiere ceases to respond to the "cancel" button on the render dialoge box. Thing is, it seems to happen only on a cross-dissolve nvolving 2 PSDs with either one or both having sizes of more than 40MB.
Can anyone help me out on this?
System Specs:
Core2Duo e7500 2.93 Mhz
6Gig memory (Kingston and GEIL DDR2-800)
Asus P5WDG2-WS Pro mainboard
Nvidia GTX460
6 Hard Drives
    Maxtor 6L300S0
    Seagate ST3320613AS
     WDC WD 10 EADS
     WDC WD1001FALS
     WDC WD10EADS
     WDC WD2500KS
Onboard HD Audio (active)
Creative Audigy soundcard (active)
Gigabyte ODIN 550 Power Supply

This is a reply i did to another topic as I mentioned having this problem
"There are 9 PSDs, it can successfully process some of them, despite the fact that they are of the same pixel dimensions (3000x4000 pixels at 300 pixels per inch). The only difference is the file size of the PSDs. Curiously, I was able to pull it off a week ago.
The PSDs were created as posters for an event and the specs were required by the print shop. Due to time constraints I decided to use the layers on them to be consistent with the theme of the event(same fonts, styles, pictures), altho each layer has a different animation(text from left while image from right) hence the two video tracks for each PSD.
Like I said, I was able to pull it off in the nick of time, say 45 minutes before the event (thanks for the mercury playback and GTX460). Problem is, I dont exactly remember what I did, I might have reduced the resolution (dpi or dimension) of one or two PSDs by a notch and left others untouched. Premiere crashed at the next video project so I can't find the right project file that worked, or it may have crashed before I could save after exporting. At the moment I'm just trying to figure out what caused the trouble so I can avoid it in the future.
I do realize that using Jpeg instead of PSDs wouldv made things simpler, but I didnt have the luxury of time to convert, recreate each layer as separate jpg, reposition in premiere all those 9 files. My main goal right now is knowing the limitations of premiere with regards to the hardware I have."
I guess I have to familiarize myself more with AE so I could be ready when the need arises. I try to stay away from it whenever I feel premiere could do the job or with the help of another application like photoshop or a plugin.
Thanks for the quick replies, it helps

Photoshop cs5 hangs on launch when loading brushes

Photoshop cs5 hangs on launch when loading brushes. I have to do a hard reboot and reset the preferences. In the past 2 days I have had to do this 3 times. I have the latest drivers. below is my hardware. I am also running lightroom. I did not have this issue until after I installed the latest updates from the adobe website. Does anyone have any information on a fix for this problem Thank You for your time.
Nancy Cuppy

That's interesting...and troublesome.
I did some research on it this morning and found it was happening dell computers (maybe because there are lots of Dells!) and there is no one answer, as there is no common connections.
Have you rebooted again after the f8>last known...step? Does it boot ok? One problem is that check disk did not clear after running and there is a fix for that.
Did your computer come with Win7 installed? If so, I would contact that computer's support and see what they say.
That it started ok in "last known" is apparently unique as I found no reference to that. Normally one goes to Safe Mode and see if it starts ok, and if it does, then steps to clear the restart problem can be implemented.
The fact that no problems showed up at the first check is a good sign.
I hesitate to offer any other solutions as there are several, including actual Registry mods but that I wouldn't do.
Perhaps others here who experienced this as well could jump in.

Photoshop Elements 13 running in Windows 8.1 hangs immediately after starting

Photoshop Elements 13 running in Windows 8.1 hangs immediately after starting. Has to be shut down by Task Manger. Task Manger shows that it is still using some CPU. Ran Procmon (part of Sysinternals) which shows that it is in a loop. Stack trace shows it is executing code in AMTValidateProductLicense.dll. Started happening about a month after I installed PSE. Everything used to work fine at first. Have tried going back to an old image of Win 8.1 on a different hard drive, otherwise same computer, and installed PSE 13 from DVD. That installation never worked, it aways hangs. If I do a clean boot, it sometimes runs long enough for me to click on a menu item and then hangs the same way. And, yes I bought a new DVD to run on this computer, never been used in any other way. Any ideas how I can get PSE running properly?

It really doesn't look like a licensing issue, it seems to be code in the area of license validation that isn't working.
I took your suggestion and initiated a couple of chat sessions with support, but so far still no luck. The latest session with Neeraj seemed to be promising. After some investigation he asked to reinstall. First he uninstalled with Revo Uninstall, which seemed to be pretty thorough. That required a restart, so he set things up to restore his conference session and took my phone number. Unfortunately I guess his connection didn't come back. When I didn't hear from him after a couple of hours I tried installing Photoshop and Premiere myself. As before, Premiere works and Photoshop doesn't. When I start Photoshop, the window opens and for a couple of seconds menus open when I click on them. Then the window freezes and I have to use Task Manager to kill it. So basically, I've tried several things but I'm back where I've been all along, I can't get Photoshop to work. I'd really appreciate suggestions about something else to try.
I wish someone at Adobe was interested in the Process Monitor traces I've made, because I'm sure someone who knows the code would be able to figure out pretty quickly what's happening. Is it trying to read a file that's not there, failing to write a file, failing to make an internet connection or what? It really shouldn't be this hard to figure out.

Adobe Photoshop CS5.1 won't start on my computer

Adobe Photoshop CS5.1 won't start on my computer I use windows XP.
Whenever I try to open the Photoshop I get a message "Adobe Photoshop CS5.1 has encountered a problem and needs to close. We are sorry for the inconvenience."
and at the bottom of the message "to see what data this error report contains, click here.
so I clicked, and that is what I got:
Error signature:
AppName: photoshop.exe
AppVer: 12.1.0.0
ModName: scriptingsupport.8li
ModVer: 10.0.0.0
Offset: 000d1a2e
I tried removing the program and re-installing, the same thing happened.
I would appreiciate any help.
Thanks.

Lalala8989898989 wrote:
AppName: photoshop.exe
AppVer: 12.1.0.0
ModName: scriptingsupport.8li
ModVer: 10.0.0.0
Offset: 000d1a2e
The ScriptingSupport.8li that comes with Photoshop CS5.1 should have the module version 12.1.0.0 as well.
It sounds as if you have done something where you have mixed modules from an older version of Photoshop (CS3) into those that Photoshop CS5 is enumerating during startup.
Did you, by chance, copy the entire contents of a folder (e.g. plug-ins or scripts) and get extra files you didn't intend?
Have you set an Extra plug-ins folder up to point to the plug-ins for an earlier version of Photoshop?
Mixing up versions of Photoshop is a no-no.
You may want to start by clearing your Photoshop preferences... Press and hold Control - Shift - Alt immediate after cold-starting Photoshop. If you're quick enough, and you have to be VERY quick to get the keys down, it will prompt you to confirm deletion of the preferences it already has set up, which will then cause it to use defaults.
-Noel

Indesign CS5.5 won't start

Hi,
My Indesign CS5.5 won't start. Gets to 'Initialising' then 'Adobe Indesign has stopped working' I've tried reinstalling, then uninstalling all programs in the suite, then reinstalling, then uninstalling & reinstalling just Indesign, then using the Cleanup tool. Nothing worked. Any clues please?
Thanks
Grant

Hi Eugene, Peter,
Thanks for your tips. I had some trouble actually finding those files, but I eventually moved the caches to the desktop and that fixed the problem. All going well now, thankyou.
BTW in the process a couple of other faults were fixed as well:
'Open recent' wasn't working and occasionally no image was loading on the screen so thanks again!
Regards
Grant

Mountain lion download is very slow and in-between it hangs of and starts from beginning. Is there a solution i have already purchased it can i download a torrent and authorize it

Mountain lion download is very slow and in-between it hangs of and starts from beginning. Is there a solution I have already purchased it can I download a torrent and authorize it. Somebody pl. Help

Exactly. Some of us don't understand the situation in India. This is a country with sickest internet speeds. The internet segment is dominated by fraudulant companies. There is no consistency that is why most of the data transfer here is through Pen drives and torrent websites. We have never seen a good downlooad speed here. And on the top of inconsistency lies the Mac book Air without a built in RJ45 port.
If i have to do it in an internet cafe it will cost me more time and money than to purchase a Mac book air itself. Apple should start giving us software loaded flash drives at least at premium.

Upgraded to Yosemite and now my CS5.1 won't start. Error install Java SE 6 runtime. How do I fix it?

upgraded to Yosemite and now my CS5.1 won't start. Error install Java SE 6 runtime. How do I fix it?

Install the version of Java they want from here: Java for OS X 2014-001
See if CS 5.1 launches.
If not reinstall CS5.1 and any updates.
Gene

Photoshop CS5 Hangs on Layer Group name edits

Layer Group name edits are causing my PS CS5 to hang repeatedly. At first I thought it was the document I was working in, so I created a generic document, and was able to replicate the problem in the new document.
With a .psd open, in the layers pallete, I have a Layer Group (A) that contains multiple sub layer groups (B) which contain additional sub layer groups (C). So the hierarchy is a three level layer group. At the sub-most layer group (C) I need to rename the groups to "Three-set colors". Since I have fifteen groups that all need the word "Three" in their labels, it would be most convenient to be able to highlight the word "Three", copy to clipboard and paste. I type in the word "Three" in the layer group name (not in the properties insector) and highlight the word "Three". Thats when PS CS5 hangs, and I have to reboot my system to unfreeze Photoshop. Only Photoshop hangs, the system does not crash. This happens in both 64 and 32 bit, old or new docs.
The plugins I have are Mask Pro x64 (OnOne) and Sitegrinder x32 (Medialab), but they are not activated when the hang occurs.
Any ideas?
PS CS5 12.01 x64
Win 7 Ultimate
12 gb ram
i7 960 @ 320
ATI Radeon HD 5700
4x HD's

I wasn't able to reproduce the problem with either Photoshop CS5 32 bit or x64. That says there's something different about our systems, and that there's likely not a systemic problem in Photoshop.
Chris Cox, who replied above, is an Adobe Engineer, by the way.
I was able to replace parts or all of the names with, or insert the word Three in front of existing layer names.
Are you seeing any errors in your Windows system logs at the time the hang is occurring?
Have you updated all your software (e.g., video drivers, Windows Updates, etc.)?
-Noel

When the new version will correct the error 10.0.0? program constantly hangs. will not start!

when the new version will correct the error 10.0.0? program constantly hangs. will not start!

Are you using any VST plug-ins or audio units? Then check, if they are still compatible. You may need to uninstall them.
See this support document:
Unexpected behavior with Audio Unit plug-ins http://support.apple.com/kb/TS5249

Should I uninstall CS5.5 before I start downloading CC apps?

I have CS5.5, but just purchased CC.
I was wondering is it recommended to uninstall CS5.5 before I start with Creative Cloud???
thanks

There is neither a recommendation nor is it a technical requirement. In particular ifd you use specific plug-ins or otehr stuff like olde scanners and printers that may not be compatible with CC or for which you don't have the money to upgrade, you might consider keeping CS5.5 around... Otherwise feeel free to remove it.
Mylenium

SAP BW 640-----SAINT HANGS AFTER CLICKING START

Hi Everybody,
We are on stack 9 on the source BW 640. I am trying to take the stack to 22 as a prerequirement for unicode conversion, and the upgrade to BI 7.0.
In this regard there is a dependency on PI_BASIS to be on 2005, and BI_CONT to be on 353. Currently we are on PI_BASIS 2004, and BI_CONT 352 on the source.
We have extracted the appropriate installation packages for the above components. When we run SAINT to install these components, and click START it just hangs. It does not take me to the next window.
At least SAINT used to take me to the next window after clicking start, but one change I did was to update the kernel to 221, saint was still hanging after clicking start, again updated the kernel to 274 which is the latest release for NW 2004. I also have the latest version of R3Trans, and tp. SAINT still hangs after clicking start button. No logs are getting generated in \usr\sap\trans\log. No files are getting generated in \usr\sap\trans\tmp.
I restored the database to what it was before we initiated the SAINT process. Still SAINT hangs after clicking start button.
In STMS-overviewu2014system-sap system-all the checks work fine(connection, transport directory, transport tool). Likewise in SAINT-utilities-check-transport tool----every thing looks good.
Why is SAINT hanging after clicking start button, can we downgrade the kernel to what it was before (level 155).
Any input is greatly appreciated.
Thank you.
Ramesh Srinivasan.

Thank you so very,very much. We are currently using a 640 gui. We tested with 710 gui and saint after clicking start does not hang.
So we are assuming that 710 gui will solve the problem.
Thanks once again. A very timely help. You bet I'll touch base with you if I run into issues.
RS

Ff 12 hangs up at starting process (windows xp)

ff 12 hangs up at starting process - it is nor possible to click on the ui

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
See also:
*http://kb.mozillazine.org/Browser_will_not_start_up

InDesign hangs up when starting

Just downloaded All of My apps through the Cloud, but InDesign hangs up when starting??????

reset your preferences -
acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
adobe media encoder: https://forums.adobe.com/thread/1713540
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
if that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall

KDE 4.3 hangs system at start up

Hello. I'm testing Archlinux to see if it will one day replace my Debian installation.
Things were more or less fine during its short sporadic use, until I upgraded the system and KDE 4.3.0-6 was installed. During start up (startx), it hanged.
Today I tried another "pacman -Syu", and saw KDE 4.3.1 was available. It still hangs in the same way and place. The progress bar says that Akonadi is starting up.
Deleting the KDE configuration files at $HOME does nothing. The blinking caps lock and scroll lock make me think its a kernel panic related problem.
Information from the log files does not seem helpful (I'm posting several because I'm not sure where to look):
Xorg.0.log:
(EE) Failed to load module "fbdev" (module does not exist, 0)
kernel.log:
Sep 3 10:09:47 typhoon kernel: X:3511 freeing invalid memtype f8102000-f8112000 (repeated about 30 times)
Sep 3 10:09:48 typhoon kernel: mtrr: MTRR 2 not used
Sep 3 10:10:12 typhoon kernel: agpgart-amd64 0000:00:00.0: AGP 3.5 bridge
Sep 3 10:10:12 typhoon kernel: agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
Sep 3 10:10:12 typhoon kernel: pci 0000:01:00.0: putting AGP V3 device into 8x mode
Sep 3 10:10:12 typhoon kernel: [drm] Setting GART location based on new memory map
Sep 3 10:10:12 typhoon kernel: [drm] Loading R200 Microcode
Sep 3 10:10:12 typhoon kernel: [drm] writeback test succeeded in 1 usecs
x.org runs fine with other window managers. Does anyone have any idea where I could look next for an explanation?
Thank you.
NOTE: This post is a duplicate of another I mistakenly posted in the Comunity Contributions section, and can't delete. I would request a moderator to please do so. My apologies.

I have the same pb since upgrade KDE from 4.2 to 4.3.
I use Arch with OpenBox at home at KDE at work. Everything was fine for years. I started having pbs with xorg about one year ago, with X hanging sporadically at start, or aften a random number of switches between consoles using CTR-ALT-Fn. I rarely starts X since I hibernate rather than halt computers, so this circumvents the pb.
Now after last upgrade (pacman -Suy) KDE 4.3 hangs, so that for the time being I use OpenBox also at home. Actually KDE starts and the mouse pointer is activated, but I get no taskbar and no response from mouse clicks, it hangs with a blank screen (white at work, black at home...).
Here is the error output from startx (KDE having being killed with CTRL-C). Errors from xorg are also present with other window managers, but they don't hang the system.
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux naoko 2.6.30-ARCH #1 SMP PREEMPT Mon Aug 17 18:04:53 CEST 2009 i686
Build Date: 25 August 2009 09:20:48PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 3 22:14:31 2009
(==) Using default built-in configuration (39 lines)
(EE) Failed to load module "i810" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
Setting master
(EE) Failed to load module "synaptics" (module does not exist, 0)
(EE) No input driver matching `synaptics'
(EE) config/hal: NewInputDeviceRequest failed (15)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
startkde: Starting up...
kdeinit4: preparing to launch /usr/lib/libkdeinit4_klauncher.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kded4.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kbuildsycoca4.so
kbuildsycoca4 running...
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kbuildsycoca4.so
kbuildsycoca4 running...
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kconf_update.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kcminit_startup.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_ksmserver.so
<unknown program name>(1482)/ KStartupInfo::createNewStartupId: creating: "naoko;1252008888;742335;1482_TIME0" : "unnamed
app"
could not access kephald, falling back to QDesktopWidget
adding an output 0 with geom: QRect(0,0 1024x768)
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kglobalaccel.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_plasma-desktop.so
kdeinit4: preparing to launch /usr/bin/knotify4
QDBusObjectPath: invalid path ""
kephald starting up
XRANDR error base: 162
RRInput mask is set!!
RandRScreen::loadSettings - adding mode: 60 1024 x 768
RandRScreen::loadSettings - adding mode: 61 1024 x 768
RandRScreen::loadSettings - adding mode: 62 800 x 600
RandRScreen::loadSettings - adding mode: 63 640 x 480
RandRScreen::loadSettings - adding crtc: 57
RandRScreen::loadSettings - adding output: 58
Setting CRTC 0 on output "VGA" (previous 0 )
RandRScreen::loadSettings - adding output: 59
Setting CRTC 57 on output "LVDS" (previous 0 )
CRTC outputs: (59)
XRandROutputs::init
added output 58
added output 59
output: "LVDS" QRect(0,0 1024x768) 0 false false
output: "VGA" QRect(0,0 0x0) 0 false false
load xml
connected: 0
looking for a matching configuration...
connected: 0
connected: 0
couldnt find matching configuration!!
registered the service: true
screens registered on the bus: true
outputs registered on the bus: true
configurations registered on the bus: true
Invalid D-BUS interface name 'org.kde.plasma-desktop.PlasmaApp' found while parsing introspection
kdeinit4: preparing to launch /usr/bin/kwrited
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kaccess.so
<unknown program name>(1505)/ kdemain: Xlib XKB extension major= 1 minor= 0
kdeinit4: preparing to launch /usr/lib/libkdeinit4_nepomukserver.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_krunner.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_nepomukserver.so
Nepomuk server already running.
(Soprano::PluginManager) found no soprano plugin at "/usr/lib/soprano/libsoprano_redlandbackend.so"
kdeinit4: preparing to launch /usr/bin/nepomukservicestub
[/usr/bin/nepomukservicestub] Failed to start service nepomukstorage.
ProcessControl: Application '/usr/bin/nepomukservicestub' returned with exit code 245 (Unknown error)
kdeinit4: preparing to launch /usr/bin/nepomukservicestub
Unknown service name: 10dd616f6b000125180802500000016720007_1251813876_507696
[/usr/bin/nepomukservicestub] Failed to start service nepomukqueryservice.
ProcessControl: Application '/usr/bin/nepomukservicestub' returned with exit code 245 (Unknown error)
[/usr/bin/nepomukservicestub] Failed to start service nepomukfilewatch.
[/usr/bin/nepomukservicestub] Missing dependency nepomukstorage
ProcessControl: Application '/usr/bin/nepomukservicestub' returned with exit code 244 (Unknown error)
ProcessControl: Application '/usr/bin/nepomukservicestub' returned with exit code 245 (Unknown error)
kdeinit4: preparing to launch /usr/bin/nepomukservicestub
Unknown service name: 10dd616f6b000125180803000000016720008_1251813876_519744
kdeinit4: preparing to launch /usr/bin/nepomukservicestub
Unknown service name: 10dd616f6b000125180803100000016720009_1251813876_508457
kdeinit4: preparing to launch /usr/bin/nepomukservicestub
Unknown service name: 10dd616f6b000125180803100000016720010_1251813876_509155
kdeinit4: preparing to launch /usr/bin/nepomukservicestub
Unknown service name: 10dd616f6b000125180803100000016720011_1251813876_509876
kdeinit4: preparing to launch /usr/lib/libkdeinit4_klipper.so
Unknown service name: 10dd616f6b000125180803100000016720012_1251813876_510559
ALSA lib setup.c:555:(add_elem) Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): Aucun fichier ou d
ossier de ce type
Dropping master
waiting for X server to shut down Fin de la connexion (raccroché)
<unknown>: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.0.
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
klauncher: Exiting on signal 1
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.
KCrash: Application 'ksmserver' crashing...
Warning: connect() failed: : Aucun fichier ou dossier de ce type
KCrash cannot reach kdeinit, launching directly.
<unknown>: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.0.
<unknown>: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.0.
<unknown>: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.0.
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
Could not connect to D-Bus server: org.freedesktop.DBus.Error.NoServer: Failed to connect to socket /tmp/dbus-CGZQ35n2gn: C
onnexion refusée
ksmserver: Fatal IO error: client killed
** (<unknown>:1494): WARNING **: Serious fd usage error 15
** (<unknown>:1494): WARNING **: Serious fd usage error 13
startkde: Shutting down...
kdeinit4_wrapper: Warning: connect(/home/us/.kde4/socket-naoko/kdeinit4__0) failed: : No such file or directory
Error: Can not contact kdeinit4!
startkde: Running shutdown scripts...
drkonqi: cannot connect to X server :0.0
xprop: unable to open display ':0'
usage: xprop [-options ...] [[format [dformat]] atom] ...
At home, KDE does display startup progress at the usual default theme, it's only after the music indicating completion that I get a black screen. From there I can launch applications through ALT-F2, thus it is tempting to launch the taskbar and the program that handles desktop from a konsole at see what happens. I tried to launch plasma-desktop:
~> plasma-desktop
Invalid D-BUS interface name 'org.kde.plasma-desktop.PlasmaApp' found while parsing introspection
same pb observed there:
http://groups.google.com/group/linux.de … c3580a87e9
reported as a bur there:
http://osdir.com/ml/kde-bugs-dist/2009-08/msg15089.html
Another strange behavior, don't know if this is related to an X pb or whatever, but when I click on the ^ button in the top bar of a windows, I obtain a small window in the top left corner of the screen instead of a maximized window.
Last edited by zsurnz (2009-09-06 15:15:50)

AE CS5 Hanging up on start up

Similar Messages

Maybe you are looking for