AE CS6 doesnt recognize my ATI Radeon HD 6850 video card GPU

As in the title, it keeps me saying GPU is not enabled while OpenGL 4.1 is supported. Any suggestions?

The video driver should be correctly updated, i launched just yesterday a quick AMD app to do that.
I dont get what screenshot you want, i dont have any OpenGL preferences in Video Card settings, but i do have put below the screenshot of AE OpenGL preferences, evenif the first part is in Italian.
By the way the productor's specs formy card are (from the site):
AMD Radeon™ HD 6850 GPU Feature Summary:
775MHz Engine Clock
1GB GDDR5 Memory
1000MHz Memory Clock (GDDR5)
128 Gbps memory bandwidth (maximum)
1.5 TFLOPS compute power
Double slot form factor
TeraScale 2 Unified Processing Architecture
960 Stream Processors
48 Texture Units
128 Z/Stencil ROP Units
32 Color ROP Units
PCI Express® 2.1 x16 bus interface
"Eye-Definition" graphics
DirectX® 11 support
Shader Model 5.0
DirectCompute 11
Programmable hardware tessellation unit
Accelerated multi-threading
HDR texture compression
Order-independent transparency
OpenGL 4.1 support
Image quality enhancement technology
Up to 24x multi-sample and super-sample anti-aliasing modes
Adaptive anti-aliasing
Morphological anti-aliasing (MLAA)
16x angle independent anisotropic texture filtering
128-bit floating point HDR rendering
AMD Eyefinity multi-display technology1
Independent resolutions, refresh rates, color controls, and video overlays
Display groupingCombine multiple displays to behave like a single large display
AMD App Acceleration2
AMD Accelerated Parallel Processing (APP) technology3,4
OpenCL 1.1
DirectCompute 11
Accelerated video encoding, transcoding, and upscaling
UVD 3 dedicated video playback accelerator
MPEG-4 AVC/H.264
VC-1
MPEG-2 (SD & HD)
Multi-View Codec (MVC)
MPEG-4 part 2 (DivX, Xvid)
Adobe Flash
Enhanced Video Quality features
Advanced post-processing and scaling
Dynamic contrast enhancement and color correction
Brighter whites processing (Blue Stretch)
Independent video gamma control
Dynamic video range control
Dual-stream HD (1080p) playback support
DXVA 1.0 & 2.0 support
AMD HD3D technology5
Stereoscopic 3D display/glasses support
Blu-ray 3D support
Stereoscopic 3D gaming
3rd party Stereoscopic 3D middleware software support
AMD CrossFireX™ multi-GPU technology6Dual GPU scaling
Cutting-edge integrated display support
DisplayPort 1.2
Max resolution: 2560x1600 per display
Multi-Stream Transport
21.6 Gbps bandwidth
High bit-rate audio
HDMI® (With 3D, Deep Color and x.v.Color™)Max resolution: 1920x1200
Dual-link DVI with HDCPMax resolution: 2560x1600
VGAMax resolution: 2048x1536
Integrated HD audio controller
Output protected high bit rate 7.1 channel surround sound over HDMI or DisplayPort with no additional cables required
Supports AC-3, AAC, Dolby TrueHD and DTS Master Audio formats
AMD PowerPlay™ power management technology4
Dynamic power management with low power idle state
Ultra-low power state support for multi-GPU configurations
AMD Catalyst™ graphics and HD video configuration software
Unified graphics display driversCertified for Windows 7, Windows Vista, and Windows XP
AMD Catalyst Control Center™Software application and user interface for setup, configuration, and accessing special features of AMD Radeon products

Similar Messages

Where can I find 24" ATI RADEON HD 4850 video card or if there is one compereble to it or dose Aple replaces with new one, because ATI RADEON HD 2600 is deffective and APPLE dose free replacment. Thanks

Where can I find 24" ATI RADEON HD 4850 video card or if there is one compereble to it or does Aple replaces with new one, because ATI RADEON HD 2600 has been recognised as deffective by Apple and APPLE replaces for free. Thanks

http://www.amd.com/us/products/notebook/graphics/Pages/notebook-graphics.aspx is a starting point.

ATI Radeon X1950 Pro video card and Quicktime Pro

In an earlier thread, I found out that the reason Quicktime Pro was not working on my new computer is that Apple has not yet worked out incompatibilities with QT Pro and new nVidia video cards. Since I need the QT Pro to do my movie editing work, I am going to switch to another high end video card. Does anyone know if an ATI Radeon X1950 Pro video card works with QT Pro? If not, is there another high-end card that someone can recommend?
Thanks

Sounds like you need a bigger case.
Or
External hard drive enclosure to house your drives.

ATI Radeon 9000 Pro video card is conflicting with additional memory

I have a ATI Radeon 9000 Pro video card. I have a 645E Max motherboard (MS-6547). I recently purchased a 512MB dimm of Kingston PC2700 Cas 2.5 memory (KVR333X64C25/512) to go with the the 256MB dimm of the same model # above. I installed the memory and my screen stays blank. When I remove the new dimm it runs fine. I did get the memory and the motherboard tested at the store where I got the motherboard and they work fine. I came to the conclusion it was my video card when I removed all my components except the memory and the video card, and turned on the machine,nothing. I did try swiching dimm location and changing any bios settings I thought would make it work. I tried updating the video card drivers and motherboard AGP drivers. If anybody had this problem in the past could you tell me how you got it to work.

I took the board and the 2 dimms to the store where I bought them. They hooked up both dimms and a video card to the board. When it was powered up, both dimms were recognized. After I got home I proceded to determine if another component it conflicting with the memory. I started with both dimms and my video card the Radeon. I powered up with no other hardware connected and the screen remains blank. I remove the 512MB dimm and leave the 256MB dimm in, and powered up and pc booted up normally.

Having trouble with my G4 MDD 867MHz DP and ATi Radeon 9800 Pro video card.

I just recently purchased the ATi Radeon 9800 Pro Mac edition card on ebay. I installed the card on my G4 and turned it on thinking everything would work with no problems, but when I turned it on the grey apple screen came up fine and then it changed to a sky-blue screen with nothing on it and remained on that screen. My desktop or any of my apps did not load up at all. I reset the PRAM and the NVRAM as the seller I bought the card from instructed me to and still I get the same result. Is anyone familiar with this problem? I was wondering if my monitor was the problem because I'm using a Dell LCD monitor as the display for right now? I need help! I'm trying to get this up and running so I can start editing. Whatever information anyone can give me will be greatly appreciated!

Sometimes display cards that support multiple displays (or a second display card in the same Mac) can cause the display you are using to be the SECOND display in a multiple-display "extended desktop".
When this happens, the MenuBar and cursor may be drawn perfectly, but be on the "other" screen, and it is very difficult to determine what has happened. \[This problem is sometimes caused by inadvertently leaving an adapter or cable on an unused display port.]
Try moving the mouse many times to the right to see if the cursor suddenly transitions onto your screen, then try the same experiment to the left.

Mac Edition G5 PCIe ATI Radeon X1900GT 256MB Video Card power cord

I have a G5 2.5 quad, serial number YM5*2EQPS. It has a ATI Radeon 9800 XT on board now. I have two monitors connected.
I want to add a Cintiq graphics tablet, so I need additional video (it is also a monitor). I purchased the Mac Edition G5 PCIe ATI Radeon X1900GT for this purpose.
I can't find a place to plug in the auxiliary power supply. I see several plugs (including a couple centered over the memory slots), but all are filled and none appear to be the six-pin type.
Perhaps I purchased the wrong card for this machine? Or maybe I'm just too stupid to open the back of my computer? Help!
<Edited by Host>

HI-
I am confused by your statements saying that you have a G5 Quad (Late 2005, right?) and that you have a Radeon9800 XT installed.
The 9800 XT is an AGP card and won't work in a Quad...
Putting that aside, the Radeon X1900 G5 Edition connects to the G5 logic board at a connector that is centered on the upper edge of the logic board over the memory slots.

Multiple ATI Radeon HD 2600 XT cards in a Mac Pro

I'm wondering if anyone has any experience with screen spanning with multiple ATI Radeon HD 2600 XT cards. What I'm looking to do is super widescreen presentations with keynote and I need more pixels. Right now I use the Matrox Dual and Triple head to go GXMs to achieve this because they make the computer see multiple monitors as one giant display but I am limited to 3840x1200 (dual 1920x1200) I was wondering if multiple video cards would also see the displays as one giant desktop?
It works on a PC but then I have to use PowerPoint (ugh). Any help or suggestions with this? Thanks in advance.

Multiple graphics cards will make the displays act as one large desktop, but when an application is set to full screen mode, it usually will just use one display. If the application is run in window mode, you should be able to move and enlarge (by dragging the lower-right corner) the window to use all displays, but there will be a window border (and menu bar on one display). You could zoom the display slightly to move the border off-screen. There is a setting in Zoom Options of "Universal Access" system preference to stop the zoomed image from moving unless the pointer reaches an edge.

DKA790GX and Visiontek ATI Radeon HD 3870 OCE Cards

Okay I have a MSI DKA790GX motherboard. (MS-7550 v1.21) with latest BIOS 1.9 loaded, a Phenom X4 9550 CPU, 8GB RAM, and 2 Visiontek ATI Radeon HD 3870 OCE Cards.
Without any drivers installed, everything works fine. With both cards in and set up with the crossfire connection installed, you can't even complete the installation of the catalyst drivers without it locking up.
This is in Windows 7 64 bit, and have tried both Ultimate and Professional, just for kicks. With just one card installed, driver installation completes successfully and everything works as normal. With the drivers installed first like this, if I then install the second card i get a blue screen on ATIMKDAG.sys. I have tried switching the order of the cards to verify that each card works by itself.
I have also tried both the latest catalyst 10.2 drivers and the manufacturers drivers which are 9.something
I have the same 2 cards in a K9A2 Platinum running fine on Vista Ultimate 64 and now I am somewhat afraid to update it to Win 7.
About the only thing I haven't tried yet is to do the same setup in a Win 7 32 environment to see if it's any different. but a quad core CPU and 8GB RAM is kind of wasted on a 32 bit OS.
Has anyone had any similar experience with this? I am not sure where the blame is, but I suspect it is in the ATI drivers and not the OS or the motherboard.
I am open to any suggestions.

Quote
About the only thing I haven't tried yet is to do the same setup in a Win 7 32 environment to see if it's any different.
Try it
Quote
MS-7550 v1.21) with latest BIOS 1.9 loaded, a Phenom X4 9550 CPU, 8GB RAM, and 2 Visiontek ATI Radeon HD 3870 OCE Cards.
How much memory sticks? Exact models? In which DIMM's are installed?
PSU? Brand and details?[look for them over PSU sticker]?

The AVI Radeon X1900 XT video card in my Mac Pro Dual-Core went bad and I need to replace it. I found one that is $250 but I don't think that I need the gaming-type processor. I am using a 23" Apple Display. Are there lower cost options? -C

The Radeon X1900 XT video card went bad in my Mac Pro Dual-Core Intel Xeon. (I tried it with a good one at the office). I found one online that was $250. I don't need the gaming capacity of this card and was wondering if there were less expensive video cards that I could use in this machine. I run Adobe Creative Suites for graphics design and have a 23" Apply display. Thank you for any help that you can provide. -PretzelMcK

Then pick up the ATI 5770 AND upgrade to 10.6.8.
Same price for a good card that will work and helps to have 1GB VRAM.
There aren't any other real choices let alone less expensive.
Even the ebay links I had and not a lot of choices.

Drivers for HP 599980-001 ATI HD5450 512MB graphics video card

I am looking for the Windows 7 Drivers for a
HP 599980-001 ATI HD5450 512MB graphics video card
if someone could please help

Bocajoe, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

I have a 27" Viewsonic 1080p monitor connected to an oldish Mac Pro with an ATI Radeon X1900 XT Graphics card. The problem is that the image does not fill the screen?!?!?

I know the image can fill the monitor, because at start up, the white Apple logo screen fills it up. But once the system starts up, there are bands of black framing the image. I have searched extensively on the internet and found the following clues, none of which solved the problem:
1) In the Windows world you can get software from ATI called Catalyst Converter that gives you the cpaobility to scale the image. This software/feature is not available for Mac users.
2) Viewsonic's web site has a trouble shooting tool. This came up in response to the topic "you have recently upgraded to a larger monitor"
"This could be an issue if you have an older Apple using the system's onboard memory to support both the system and video display. Even if you have enough onboard RAM to support a higher resolution, it will not since the system will use some of the memory. Because the true video RAM available is much smaller than the total onboard amount, the system limits the size of the image. You will need to contact Apple to get an upgrade in onboard RAM or update the complete system."
I have 2GB of RAM, so lack of RAM memory does not seem to be an issue. I am running OS 10.6.8
Does anyone have any clue how to solve this problem. It is frustrating to have a 27" monitor behaving like a 25" monitor.
Thanks in advance for sharing any experience on this.
JD in PA

http://www.xlr8yourmac.com/Graphics/radeon_X1900XT/X1900XT_dust_buildup.html#sto rytop
http://www.xlr8yourmac.com/Graphics/X1900XT_Overheating/ATI_X1900_artifacts.html
http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
http://www.amazon.com/Apple-ATI-Radeon-5770-MC742ZM/dp/B003Z6QH6M/
http://www.amazon.com/PCIe-Power-Cable-nVidia-Video/dp/B002UR1654/
http://www.amazon.com/gp/product/B0036Q7MV0/

Is a ATI Radeon X1900XT (512 MB) card enough to drive a single monitor for video editing

My son just given an older mac pro.
2 x 3 GHZ Quad Intel Xeon.
OSX Lion
The video card installed is an ATI Radeon X1900XT (512 MB)
Is this video card sufficient to drive a single monitor for video editing and basic graphics work in PhotoShop, etc?
Many thanks.

nothing I guess
Just noticed that you can add emoticons to these posts.

Can't install driver for my ATI Radeon 9800 XT VGA card!

Hello:
I own a computer with these specs:
Operating System Microsoft Windows XP Professional 5.1.2600 (WinXP Retail)
Computer:
Computer Type ACPI Uniprocessor PC
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 3
Internet Explorer 7.0.5730.11 (IE 7.0)
DirectX 4.09.00.0904 (DirectX 9.0c)
Motherboard:
CPU Type Intel Pentium 4, 2400 MHz (18 x 133)
Motherboard Name MSI 845E Max (MS-6566E) (6 PCI, 1 AGP, 1 CNR, 2 DDR DIMM)
Motherboard Chipset Intel Brookdale i845E
System Memory 512 MB (PC2100 DDR SDRAM)
DIMM1 256 MB PC2100 DDR SDRAM (2.5-3-3-6 @ 133 MHz) (2.0-2-2-5 @ 100 MHz)
DIMM2 256 MB PC2100 DDR SDRAM (2.5-3-3-6 @ 133 MHz) (2.0-2-2-5 @ 100 MHz)
BIOS Type AMI (09/13/04)
Communication Port Communications Port (COM1)
Communication Port Communications Port (COM2)
Communication Port ECP Printer Port (LPT1)
Display:
Video Adapter RADEON 9800 XT - Secondary (256 MB)
Video Adapter RADEON 9800 XT - Secondary (256 MB)
3D Accelerator ATI Radeon 9800 XT (R360)
Monitor LG F900B [19" CRT] (121137790)
Multimedia:
Audio Adapter Realtek ALC650 @ Intel 82801DB ICH4 - AC'97 Audio Controller [A-1]
Storage:
IDE Controller Intel(R) 82801DB Ultra ATA Storage Controller - 24CB
Floppy Drive Floppy disk drive
Disk Drive IC35L060AVV207-0 (60 GB, 7200 RPM, Ultra-ATA/100)
Optical Drive SAMSUNG CD-R/RW SW-252S (52x/32x/52x CD-RW)
Optical Drive TEAC DVD+RW DV-W58E (DVD:8x/4x/12x, CD:32x/16x/40x DVD+RW)
SMART Hard Disks Status OK
I just replaced my old graphics card NVIDIA GeForce2 MX/MX 400 with another old model card, ATI Radeon 9800 XT. Everything was fine until I tried to update a recent ATI driver after uninstalling my old Nvidia driver with DriverCleaner Pro. I get this error message:
"Setup failed to launch installation engine: Class not registered"
Then, tried to install the driver through device manager with the update driver option. I directed to the driver folder on my desktop and the driver update went through, smoothly. However, when I put my computer in standby mode and then restore to full operation
I got a BSOD with this error msg.:
ati2dvag.dll-Address BF039614 base at BF012000, DateStamp 49344e53
Now I can't use standby mode because the computer just shuts down instead of operating in standby.
Is there any idea why my new card is not being fully accepted in my OS and how can I fix this issue. BTW, my ATI card is an 8x speed and my AGP slot supports a max of 4x speed, but I think my card is reverse compatible with 4x slot with the same voltage (1.5V).

Thank you BOSS for your quick response:
I took your advice and reinstalled my OS, but unfortunately stand-by mode is still causing errors. The only difference is that I managed to install the ATI driver normally and no BSOD, so far.
I'm not sure what is causing this, but my humble guess would be that my ATI card is an OEM card which is pulled form a working dell computer and these cards sometimes do not integrate well when installed on non dell motherboards... However, I need to find out that that is absolutely the case before I remove my vid. card from my system
There is a memory dump file that contains the info about this error but I can't decipher...I'm not a computer savvy, but you or someone here my find the root of the problem in that file. If that will be of any help to provide you with I will, next time.
Thanks in advance!!!

Blank screen while using a ati radeon x1300 pro graphics card

i'm getting a blank screen at start up while using my radeon x1300 pro... dont really know whats wrong with it. the agp slot is good, i'm getting power to the card, my board is set to boot agp/pci for the video so thats good. only problem is is that i'm not sure what the model of my motherboard is to check with compatiblity. got the mb and processor from a buddy of mine. he got the mb and processor from a friends grandpa... so to make long storys short. i have no idea what my computer is made of but from what i hear ati products dont seem to get along well with msi. is there any logical reason? and if so is there anything that i have overlooked here? common problems and such. i've updated everything i could update but still no signs of life comming from my video card " and yes the card was pushed in all the way". any feed back would be appreciated.

Example of what system spex should look like:-
MSI P865 Platinum with 3.A bios ( MS-6728 VER 2 )
Enermax 465 20 pin PSU +3.3V = 35A +5V = 35A +12V = 33A
Intel P4 Northwood 3.0Ghz (No overclock) (Arctic cooling Freezer HSF unit with Coolalabs thermal metal coolant)
512Mb Corsair XMS ddr400 memory (2x256Mb in dual mode)
Trust Dugital Pci Sound card
Nvidia 6800GT 256Mb memory AGP card (No overclock)
80Gb Western Digital IDE hard disk on Primary
LG DVD IDE optical drive on Secondary
Jeantech Phong case (120mm in front intake and 120mm at back exhaust)
Win 98 SE (Del modded edition)
I am sure this will help you.
Del

ATI Radeon 9600 PRO Graphics Card

I am thinking of upgrading my graphics card, my computer came with a Nvidia Geforce4 mx, I was at the apple store and noticed a few people having problems with this card. I was wondering if anyone out there has any info for me about the odds of this card working on my Quicksilver G4 933 MHz. Iam driving a Cinema Display 20 inch. I really like gaming online and could use the added memory that the ATI Radeon Pro 9600 has, plus my curent card has problems with full screen games.

StephanZcat,
I've been out of town for a bit and just saw your post and links. I'll do some research and see if I can come up with something. ...and maybe we can get some other experts in here.
JBernstein:
Apple usually has a disclaimer about all 3rd party upgrades to Mac's that states they 'do not support them'. So, if it's not for sale at the Apple Store or a Dealer, "It's not supported" - even if it works just fine. For Apple Authorized Do-it-Yourself upgrades there is a page you can access:
http://www.apple.com/support/diy/
There are many sites that track Mac upgrades, I'll list a few.
For 3rd party upgrades and issues, look at:
http://www.xlr8yourmac.com/
http://www.barefeats.com/
http://eshop.macsales.com/benchmark/index.cfm
BTW, your 20' just needs at least a 32MB Video card to push it. Here's a list of most cards that will fit in your 'Sawtooth'. It's set up for Apple Cubes but the information may be helpful in
seeing the differences in video cards
http://www.cubeowner.com/forums/index.php?act=Attach&type=post&id=1327
Note: Your Sawtooth's motherboard does NOT support ADC connections. There is no power supply for them. You will have to make sure whatever Video card you get has DVI and VGA (not ADC).
Look at this for compatible video cards for a Sawtooth:
http://eshop.macsales.com/MyOWC/Upgrades.cfm?model=166&type=Video&TI=%23TimeForm at%28Now%28%29%2C&shoupgrds=ShowUpgrades
Finally, there are a host of 'flashed' PC video cards available for Mac's on Ebay. I have a few and most work fine. If you want to see some options, I suggest you look at what a seller named 'yoyomarv' has for sale. Ask questions before you buy. A card you might consider is a converted NVidia Geforce 4 Ti 4600
It's a start...
Dave

AE CS6 doesnt recognize my ATI Radeon HD 6850 video card GPU

Similar Messages

Maybe you are looking for