AE CS6 Global Performance Cache doesn't appear to be caching
If I play the timeline by hitting the space bar, AE will slowly play through the timeline, rendering as it goes. The rendered portion will have the familiar green bar at the top, but at a certain point my system will run out of memory and I'll begin losing what was first rendered. During this process I'll see small segments of blue that indicate data written to the disk cache, but the segments are small and sporadic, just a frame or two here and there.
I've set up the cache and processor according to the Adobe tutorial, then reviewed the tutorial and re-checked the settings with our IT manager.
After watching one of the video tutorials on AE CS6 it occurs to me that this feature may only work with RAM Preview. So I attempted what was shown in the video: Do a RAM Preview, change something on a layer (moved a path point), new RAM Preview, then UNDO. I did not get a green bar indicating that AE had re-loaded the previously cached version.
I then closed and reopened the project as shown in the video but did not see a blue bar indicating that the preview had been saved to disk.
Project: 20 second comp with two video and two solid layers. Video = 1080 Canon DSLR video (same video file; one layer has a stationary mask). Solid layers each have one path with the Stroke effect applied to it.
System: HP workstation, 6-core Xeon (hyperthreading OFF), 12GB ECC RAM, nVidia GeForce 460 SE (1GB DDR5), Win7 (64), Intel SSHD (system), 10k HDD (swap and temp files), server-class 7200RPM mirrored data drives, CS6 Production Premium. All drives are defragmented. Tried with Norton Corporate AV ON and OFF, no difference.
As a troubleshooting measure we also tried this on a brand new HP Z420 workstation with Xeon Quad (hyperthreaded), 8GB ECC Ram, Quadro 3800 (or 3850?) graphics, system drive, data drive. Scrubbing through timeline was faster, but disk cache behavior was the same.
My initial impression of AE CS6 is that it feels slower than CS5 and it seems to me that I must be doing something blatantly wrong. Ideas?
Guy
OK, here's what I've found: On my workstation as well as our test system (now set up with a dedicated RAID just for the cache), the GPC seems to work when the resolution is set to 1/2 rather than Full (before changing it, on my workstation the resolution was set to Auto and it chose Full).
Is there a way to get GPC working when the resolution is set to Full?
Similar Messages
-
Global Performance Cache and GPU
Nvidia's website says: The Global Performance Cache feature makes After Effects faster and more responsive than ever before by taking full advantage of the power of your computer's hardware. NVIDIA GPUs allow you to accelerate previews when drawing images to the screen for a highly interactive experience.
does the global performance automatically use the gpu or do you have to enable it? and is this a good reason to invest in a good gpu or not really?The global peformance cache has nothing whatsoever to do with the GPU or Nvidia. See this for details of the cache features:
https://www.video2brain.com/en/lessons/global-performance-cache-and-persistent-disk-cache
After Effects uses the GPU for almost nothing. Details are here:
http://www.adobe.ly/AE_CUDA_OpenGL_GPU -
Global Performance Cache - Seeking Opinions
Hi Guys -
I am still debating whether to buy CS6. None of the new features interest me nearly as much as the GPC; my decision to upgrade depends a lot on what you guys say about it.
I've used AfterFX long enough to know (since AE7 Pro) that the speed of a RAM preview depends on many factors. Nevertheless I hope that won't preclude you from giving me a general sense of the GPC's effectiveness.
Is the GPC so good that it's worth upgrading for that feature alone? Is it an obvious improvement compared to previous versions, one you appreciate all the time? Or is the benefit minimal, a small step in the right direction but not something that should weigh heavily in my decision to upgrade?
Thank you very much for taking the time to share your thoughts, I appreciate it.I agree with Todd that CS6 isn't as "wonky" as it was at first. I also agree that I can't stand to go back because everything is faster.
This paragraph of yours is very revealing:
For me very often it's just the opposite. I'm asked to make a title sequence, a dvd menu, a wedding video "more interesting please." We talk, I learn what I can, make some sketches, take notes... then I sit down with AfterFX (and Encore, Prem Pro etc.). I tend to use the same effects over and over because I don't want to (or have time to) wait for unpredictable outcomes, and changing even the simplest command, wiggle(3,4) to wiggle(3,5) means the whole comp has to re-render in RAM. It's aggravating.
This is exactly what I mean when I talk about doing motion studies at 1/4 or 1/2 rez. Make your motion experiments on simple layers without effects. I tend to use a lot of pencil sketches shot with my phone, simple shape layers, and text layers all with nothing but motion to figure out what the scene is going to look like. I'll even often send two, three, or even 10 different motion studies to a client via private Vimeo renders to decide how to proceed with the project. It's the same technique that cell animators and 3D artists use today. Pencil tests traditionally refer to cell animation but I use the term to describe any motion test from any app that does not have the finishing touches applied. Make a low rez 'pencil test' version of the animation to make sure things work before you paint, texture, and clean up the rest for final proof. The GMC in CS6 makes this kind of experimenting extremely fast. It also helps when you are doing the very last stages of your color and effects work on a frame. Both of these comprise less than 30% of my time working on a project and that's why I spend most of my 'creative time' with the caches turned off because they still hold on to an occasional frame or rendered in the background effect that I don't want to see.
You have a distinct disadvantage working with folks that are not in the production business because they are not usually comfortable with 'pencil tests' but there's nothing that says you can't use them to speed up your workflow. Just keep the ones that you like as separate comps, pick your favorite, finish it up and sent the client a nice completed proof. If they don't like it then you've got 2 or 3 or 10 other pencil sketch versions already done tyat you can quickly apply effects to and clean up for final approval.
Wouldn't you rather spend 2 hours on a DVD title checking the timing and motion with 10 versions and 1 hour adjusting the color, effects, and final look than 2 days fiddling around with 3 versions checking every frame at full rez. I'm just trying to give you a few pointers that will let you have some time in your life to do something other than sit in front of your screen and wait for full rez, full effect previews of your work. -
3D menu doesn't appear - Photoshop CS6 extended
The 3D menu doesn't appear on my Photoshop CS6 extended.
I am running Windows 7 Ultimate (Version 6.1)
Any ideas about what is going on?it also states no video card dtected? I'm gunna paste verything it says so you can have a look at it if that ok?:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x32
Operating System: Windows 7 32-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 2610 MHz
Built-in memory: 2037 MB
Free memory: 412 MB
Memory available to Photoshop: 1627 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
The GPU Sniffer crashed on 18/02/2013 at 21:14:33
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
No video card detected
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6\
Temporary file path: C:\Users\Kara\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 288.8G, 202.6G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libeay32.dll The OpenSSL Toolkit 0.9.8g
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp71.dll Microsoft® Visual Studio .NET 7.10.3077.0
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr71.dll Microsoft® Visual Studio .NET 7.10.3052.4
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (32 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
shfolder.dll Microsoft(R) Windows (R) 2000 Operating System 5.50.4027.300
ssleay32.dll The OpenSSL Toolkit 0.9.8g
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.3
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Embed Watermark 4.0
Entropy 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Extrude 13.0
FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Maximum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mean 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Median 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mezzotint 13.0
Minimum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Range 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Skewness 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Sumi-e 13.0
Summation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONE -
In CS6 InDesign (8.0.1) I tried looking for Folio Overlays panel and it doesn't appear. So, I tried to go to Updates under Help menu but the Updates button is deactivated.
Any ideas?Folio Overlays is available under the 'Window' Menu. If it is not available, download it manually, links are available in the following document: Digital Publishing Suite Help | Installing DPS tools
-
I just bought a new macbook pro and my CS6 migrated, but now when I open existing documents, it launches a free trial version. There doesn't appear to be a way to enter my serial number or communicate that I simply have a new computer. HELP! There is no customer support for this. I can't believe what a poor service company Adobe is!!
The problem was that you migrated CS6. Unfortunately, migration doesn't work because it doesn't move all the files.
First, you'll need to use the Adobe Cleaner Tool to remove the components that were installed:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Second, you should install a clean copy of CS6. Here is a link:
Other downloads -
Very excited about CS6's new global hash cache.
The new "Cache Comp in Background" raises a couple questions in my mind:
For every frame I see in my comp window, AE has cached that frame as well as the frame of each layer and pre-comp (and pre-pre-comp) to disk?
Does RAM Preview now also write the global cache to disk as well as load frames into RAM? (Could it be thought of as "Cache Comp in Foreground"?) If so, does spacebar playback do the same caching as RAM Preview?
If I RAM Preview "Comp A" at half res, and then at full res, does AE store the global cache for the same comps at both resolutions?
So, if I RAM Preview my final comp at full res, is there any need to use the "Cache Comp in Background" command?cache comp in background makes a point in time copy of your comp and renders it to disk.
spacebar reads from disk into memory. If you have a slow disk subsystem you may get slower than realtime playback.
ram preview will try and render as many frames until it runs low on memory. If you happen to have render multiple frames simultaneously, you might see "switching to foreground process". This is because it ran low on RAM and is only rendering on 1 process, but will render on disk until it hits the upper limit of your media cache limit.
Hope it helps.. -
Save/open dialog box doesn't appear
Hi,
I have something strange. I can open and edit a project by double clicking on it, also start a new project. But when I want to save or open a project via "save as" of "open project" the dialog box doesn't appear. Saving an existing file trough "ctrl+s" works.
Things I tried already are:
- Restart my computer (windows)
- Clear my AE cache
- Reinstal AE
Has anyone has this before? It would be great if it got solved because I can't complete work because of it.
Tnx & grtz,Sorry, here the information that is required:
Version 11.0.4.2 - CS6
Installed recent updates: Yes
OS: Windows 7 Pro (Service pack 1) 64 bit
Model: HP Z420 Workstation
Processor: Intel Xeon CPU E5-1620 @3.60Ghz
Ram: 8Gb
Has it worked before: yes. It started after I opened a project (trough "open project") because double clicking on this project gives the follwoing error: "The directory name is invalid". Via "Open project" I could open it.
Do you have any third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU)? No
Quicktime 7 pro installed
Do you have any third-party effects or codecs installed? Yes, Optical Flares & Trapcode. But is unrelated since it isn't a specific project.
Are you using Render Multiple Frames Simultaneously multiprocessing? Yes
Are you using the ray-traced 3D renderer? No
Thanks for the help. If you need any other info, let me know -
Adobe Exchange panel doesn't appear in Dreamweaver CC
I've joined CC and I'm using Dreamweaver, I've also tried to download and install Adobe Exchange panel without success - I can see it in extension manager but the panel doesn't appear in Dreamweaver. I'm beginning to regret ever signing up for CC as it appears to be very glitchy. Could someone help me with this please.
I'm running Windows 7
Many thanks
MaddieHi Maddie,
Thank you for this extra information regarding the Exchange Panel not appearing. It's strange that the problem appears in both CC and CS6 - these use different processes and different installation directories for extensions and should be independent of each other.
A few questions -
Can you please look in Task Manager when Photoshop CC is running and see if there is a process listed called "Adobe CEP Service Manager"? Do you have any "system optimisation" or security software running which may be blocking processes that you haven't expressly permitted?
In Photoshop CC, can you see any other extensions listed in Window -> Extensions? Upon installation there should be other Extensions available, for example "Kuler" - can you see this in the dropdown? This will help us to work out whether this is a problem with Adobe Exchange specifically, or if it is an issue with all extensions in general.
If you can then turn on logging as follows, that would be very helpful:
In Registry Editor, regedit.exe:
HKEY_CURRENT_USER>Software>Adobe>CSXS.4
Increase the LogLevel to 6. Then run Dreamweaver or Photoshop CC - Log files will be generated in: C:\Users\<username>\[AppData]\Local\Temp. If you are in Photoshop the log file will have the filename csxs4-PHSP.log, and for Dreamweaver it will be csxs4-DRWV.log. Please email these log files to me at fgregor at adobe dot com.
Upon searching the forums, there was another user who may have had the same problem as you (http://forums.adobe.com/thread/1291469) - can you check whether C:\Program Files (x86)\Common Files\Adobe\CEPServiceManager4 contains CEPServiceManager.exe?
Regarding the "glitchy" issues you mention - this forum is for Adobe Exchange, but if you can provide a bit more information about what is going wrong then we'll try to redirect your question to someone else who can help.
Best regards,
Fraser -
IPhone 4 doesn't appear in the portable device list of windows 7
Hi there,
My iPhone used to appear in the portable device list in windows 7, so I was able to open iPhone in Explorer and copy the photos from the camera roll.
In iTunes, when asked to update it, a problem occurred when installing QuickTime. I had to unistall iTunes+QuickTime and download the last version from Apple website. Installing was performed Ok but since then the iPhone doesn't appear in the portable device list anymore.
I tried to restart the service, to re-install it, but nothing.
Is there any other way to copy the photos from the camera roll?
Anyone please could give me any help?
Thanks in advance.No dice. See my comment above; I already turned that on before posting.
To get your device to appear in iTunes and to automatically sync with iTunes, simply disable backup to iCloud on your iOS device. Voila! Your iOS device will appear in iTunes and auto-sync the selected content. For example, I'm now subscribing to a ton of podcasts that I used to manually download one-by-one b/c the tethered syncing process was just too painful. Now that my iPhone 4S appears as an always-connected device in iTunes, the latest versions of my podcasts shall auotmatically appear on the iPhone when I awake in the morning before my long commute to work. -
Called Name Doesn't Appear Until the Call Connects
We have an issue with the Lync client and some of the Lync IP phones that if User A calls User B using his lineURI (extension number), the name of User B doesn't appear on User A's client until the call gets connected, in the meantime the extension only
appears until the call gets connected.
Any idea how to let the called name appear for the calling party?Yes that is what is address book normalization when the call comes into Lync It will normalize and then perform Reverse number look to display User information
http://lyncuc.blogspot.in/2013/12/dialplan-normalization-with-extension.html
http://blog.schertz.name/2010/09/lync-2010-address-book-normalization/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph -
Speech Feedback Window Doesn't Appear
In the beginning, speech recognition worked with some commands, but simply didn't respond to most others. Then the speech commands window suddenly emptied itself. I got a temporary fix for that problem, but now I find that the speech feedback window doesn't appear at all.
I tried the advice in the help (switching it off and back on again; rebooting; deleting the com.apple.speech.recognition.feedback.prefs.plist) but it has not worked. And the plist file hasn't even recreated itself.
Please help if you can.Hi. I followed the advice of another related thread and now I'm convinced it works.
There's a bug in Panther that cripples Speech Recognition when the Address Book is activated to respond to speech commands. (Maybe it's b/c Address Book overloads the SR system?)
Go to System Preferences > Speech > Speech Recognition. "Apple Speakable Items" is the only choice in my Recognition System window; so I didn't choose anything there but the default. Then, go down and make sure that Address Book is UNchecked (not On). I have all the other ones checked (On), such as Global Speakable Items and Application Specific Items, etc., and am not experiencing problems.
Hope this works for you. It seems to have worked for many others. I have no other advice! Best,
Walter -
TMS - CCMS Alert domain doesn't appear
On my training system when I go into STMS, then CCMS Alert Monitor,(The "Bell" icon") the domain doesn't appear under change and transport system. It also won't allow me to create it in rz20. I've tried redistributing and activating the stms configuration and it still won't appear. Ideas?
Thanks,
DanielYour Problem is not with STMS configuration.
Based on what you have explained i am thinking because of the system copy you have performed the MTE classes of target system have been over written from source system (of your system copy)
But it is not a big deal to bring the MTE classes again.Below is the procedure.
Logon to the Solman - RZ21 --> Configure Central reaction ---> Assign Central reaction
Under System ID - Select SID of your satelite System --> +MTE Class from the system.
Once you do that you should get following message ### MTE Classes were collected by <Satellite System>
Hope this helps -
Hello BW Gurus,
We would like to use global olap cache function to optimize the performance of our queries.
We've tried it with using the persistent cache on flat file modus. Unfortunately the size of global cache remains 0 KB, whenever we execute the different queries and system does not generate any flat file.
First of all I would like to ask, what is the relationship between the shared memory size (rdsb/esm/buffersize_kb) and OLAP Cache size. Which one should/must bigger? or this question is irrelevant for to realization of olap-cache.
And could you please tell me, which other parameters should we check?
Debugging with the transaction RSRT (Execute and Debug with Cache Breakpoints) didn't help us.
Thanks for your reply.
Regards,
Nuran AdalHi
Have a look at this:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0ebfba1-5a1a-2d10-82b5-fdddc1e5955c?quicklink=index&overridelayout=true
Thanks
Kalyan -
Body of mail from some senders doesn't appears
Dears All,
I'm using Thunderbid 24.4.0.
Actually, I receive some emails but the body doesn't appears. It is seems to be empty but it is not.
this emails came from the same senders.
the other fields appears (sender, receivers, subject, ....)
Thanks for your help,
Best regardsThe body of the message ...
See bellow an extract:
------=_Part_380848_557392185.1395919668760
Content-Type: multipart/alternative;
boundary="----=_Part_380849_570761733.1395919668760"
------=_Part_380849_570761733.1395919668760
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Hello,
Search for solution button is to create a new search object related with=20
Incident to search. Once the object is created, it can get better search=20
performance and results. That's why only the users having the insert option=
=20
for Incident can do this.
/////////////////////////////////////////////////////////////////////////////////////////
Maybe you are looking for
-
Sql server grants access to specific login to database.
i have created website for intranet and hosted it on server. for that i needed to create login "IIS APPPOOL\hi" in sql server 2008 for my application to access my "reportdb" database. "IIS APPPOOL\hi" has sysadmin and public server roles in sql serve
-
Calling Parameterized Method from one class to another class
Hi, below is my sample code test.java public class test int op1[][]=new int[][]{{1,2},{2,3},{4,5}}; int row=0; public void test() { int op2[][]=new int[][]{{2,3},{4,5},{6,7}}; row=1010; getR
-
I have a site that i'm working on for class and i need to be able to have people comment on my blogs and stiff and they can't because im using FTP because I don't have a mobileme account. WIll this be changing soon that you can all comments to your
-
When someone facetimes me if I miss their call it does not show up in lock screen or number missed above the FaceTime app. I have everything turned on for the previews and show in lock screen and recently missed items is 10.
-
How to deactivate the Most Recently Used List in Adobe Reader?
Hello, how can I deactivate the "feature" of last used file list. In our firm it is not alowd to see which document was used last time on a computer/login. A sheduled erase at the registry is not a functional way to deal with the problem. s. Peter