AE CS6: How to Ram preview or playback in smooth real-time everytime?

Hi guys,
I would  like to know how to Ram preview or playback in smooth real-time everytime? I'm using a videohive template and adding in my footages to the media holder comps. The AE template is complex I guess.
Hee's the problem, everytime I make a change to text, add a footage replacement or make any change at all, I have to completely render and wait a long time to see my final product in "Real-time"/smooth. Is there someway that I can render out the whole thing once and even though I make a change the entire video will play smoothly without rendering time? 
PC Specs:
HP 510t
Windows 8 Pro x64 bit
16GB Ram
i7 2600 CPU @3.4 GHz
GTX 660Ti

Proxies don't affect rendering beyond the point of reducing the resolution and thus the nuimer of pixels that need to be processed, but since the retain the effect properties at full resolution, e.g. a large blur still renders just as slow. They are more a means of reducing file I/O bandwidth while working really.... As I said, the best way to optimize this would probably be to restructure the project so parts that don't change reside in separate pre-compositions and can use the disk cache.
Mylenium

Similar Messages

  • RAM PREVIEW VERY SLOW (FAR FROM REAL TIME) ON NEW MAC PRO

    Good afternoon
    I have the new mac pro with 8 cores, 64 Gb of Ram and dual AMD 700 graphic card, but the preview on After effects is slower than in the old mac pro (from 2010). I have set the preferences as told in your website and everything stills the same. Could you please advice? is very frustrating to see that a new machine works worse than the older one.
    thanks

    Attached below you can see some screenshots from the settings I have on AE CC

  • How can I boot my PXI controller into real-time without a floppy disk?

    My PXI controller is in a lab which has intense magnetic fields that could corrupt the floppy disk used to boot the PXI controller into the LabVIEW Real-Time (RT) Operating System. How can I boot the PXI controller into real-time directly from the hard drive?

    If you are using LabVIEW 5.1.2 Real-Time (RT), launch Remote System Explorer and select Disks >> Create Format Hard Drive Disk. If you have LabVIEW 6 RT, launch the Measurement and Automation Explorer (MAX) and select Tools >> RT PXI Disk Utilities >> Create Format Hard Drive Disk (LabVIEW RT 6 has not be released yet). Once you have created the disk, boot the PXI controller with the Format Hard Drive Disk, and this will format the PXI's hard drive and install the real-time OS boot loader. Now you can reboot the PXI without a floppy disk and configure the PXI using Remote System Explorer or MAX. Be aware that this will remove all information from the hard drive, including other operating systems.

  • After effects ram preview video playback issue

    Greetings -- I have Mac Pro 2.93 GHz 12 Core with Nvidia Quadro 4000 & 24GB Ram.
    During ram preview playback, it seems as though the video isn't refreshing fast enough in the display -- meaning its almost as if I can see the refresh on the top/bottom half of the frame happening separately.  It's a bit diffucut to describe, actually.  This does not happen with the same clip in Premiere, just AE.
    The rendered video is fine and plays in QT/VLC, etc. without issue, it's just ram preview and is very distracting.
    Any help woul dbe greatly appreciated!
    Seth

    CS6, 720p clip, 100%, Full, 29.97 fps. This may be related to the preview settings... It seems to go away if I turn it to final quality v.s. adaptive. 
    Fast Draft:
    Available
    Texture Memory:
    409.00 MB
    Ray-tracing:
    GPU
    OpenGL
    Vendor:
    NVIDIA Corporation
    Device:
    NVIDIA Quadro 4000 OpenGL Engine
    Version:
    2.1 NVIDIA-7.10.2
    Total Memory:
    2.00 GB
    Shader Model:
    CUDA
    Driver Version:
    4.2
    Devices:
    1 (Quadro 4000)
    Current Usable Memory:
    1.11 GB (at application launch)
    Maximum Usable Memory:
    2.00 GB

  • Frame counters during RAM preview and playback

    It is my understanding that  I should be able to view the number
    of the currently processing frame during the course of a RAM preview
    in both the timeline counter (in frame display mode) and in the info panel.
    This is not working for me, and I would like to see if I am missing something.
    Here is the status of the counters with a RAM preview in progress.
    The only updating frame counter is at the bottom of the composition window,
    and it would not be visible while processing a full-screen RAM preview.
    RAM PREVIEW IN PROGRESS
    This is the status of the counters during playback of the RAM preview.
    The playback CTI is at about frame 90 of 912, but the counters in both the
    composition window and timeline are frozen at zero, while the info panel
    is frozen at the last frame number of the timeline (the last frame rendered).
    RAM PLAYBACK IN PROGRESS
    During spacebar playback, only the composition window counter displays
    the current frame.  The timeline counter is frozen at the frame number where
    the CTI was parked when playback began (in this case, from frame 0).
    The info panel only displays the framerate of the playback.
    STANDARD PREVIEW PLAYBACK
    If I stop either a RAM or Standard preview playback using the spacebar
    the timeline counter will update to the CTI frame, but if playback resumes
    the counter stays frozen where the CTI was parked when resuming playback.
    I am experiencing this behavior using frames, timecode, ft+frames, and using
    "From Current Time" RAM previews.
    Please tell me I'm doing something wrong.

    The question I posed was:
    2. Is there a way to display the number of  the frame that is currently
    being processed during the course of a RAM preview?
    The answer was:
    >Info panel + timeline display set to frames.
    Your tip to disable "Show Rendering Progress In Info Panel And Flowchart"
    is very helpful.  By unchecking the option, I do get a count of the currently
    rendering frame during RAM preview... thanks for that!
    It does seem a bit counter-intuitive to de-select this option in order to
    view what might be the most the pertinent information (the current frame)
    instead of "whizzing minutiae", but it does confirm I was missing something.
    As for Mylenium's answer "timeline display set to frames", I can't seem
    to get a running count in the timeline display under any rendering
    or playback circumstance. I am a long-time Premiere user, and I was
    expecting the timeline counter in AE to behave in a similar manner by
    updating the current time during playback.
    Is it the proper function for the timeline display to only update when parked?
    If yes, I can get used to it.  Again, I just want to know if I am missing something.
    thanks

  • After effect cs6 crashes after ram preview

    I've saved yesterday a project and opened today wanted to doulbe check everything so I run Ram Preview it rendered fine but as soon as I click a mouse button after effects just chrased
    Thank you for your help

    We need to know a lot more if we're going to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

  • After Effects Playback 27 fps (Real Time) Audio is Slow

    Hello,
    I have Adobe After Effects CS 5 running on an HP Z600  8 core workstation (12 GB RAM) on Windows 7.
    When I import any video AVI, MOV, etc and I preview with RAM the audio plays slow and it reports fps: 27 (real time)
    When I link comps from premier I think it is causing lip sync issues.
    My co-worker has the identical computer and when importing the same video, his reports fps: 29.97 (real time) and audio play fine.
    I have looked around for settings that may affect this but nothing seems to help.
    Multi-threading? Open GL issue?
    Any Ideas?
    Thanks,
    Greg

    > Sorry, I just figured it out.
    If you think that what you just figured out might be useful to others, feel free to elaborate here. If not, then I'll go ahead and remove this thread if you don't mind.

  • How do i use multiple threads( very much real time), using JavaFX?

    I'm creating an application, using JavaFX because one can create awesome GUI using JavaFX. I need to know how to create real time multiple threads using javafx.
    JavaFX doesn't support creation of multiple threads, but i think there is another way of doing it. I need it work in real time as my application works with an hardware (wacom intous 3 tablet), and i need mutiple threads to get all the parameters from the stylus of the tablet simultaneously...
    any code which will help me out or explaination on how to go about this is appreciated...
    Help required quickly...

    See example at
    [http://jfxstudio.wordpress.com/2009/06/09/asynchronous-operations-in-javafx/|http://jfxstudio.wordpress.com/2009/06/09/asynchronous-operations-in-javafx/]

  • How can I change a Mixer filter in real-time? (11.5)

    Hi all,
    I'm currently coding (or trying to code) an interactive soundboard that users can play with in their software. They can turn inputs on and off, increase the volume, change the EQ, etc. The nice is, and I was really pleased to discover this, Director already has a feature called an 'Audio Mixer' that has filters to satisfy all these functionalities! The bad thing, I can't figure out how to change these filters in real time.
    For example, here's the code to MUTE a specific mixer (activated when the user toggles a button):
    member("channelOneMix").mute()
    But how do I tell it go INTO that mixer, find the existing High Pass Filter, and change the value of that High Pass Filter's 'highCutOffFreq' property? It's a classic case of knowing exactly what I need to tell the code to do, but I have no idea of the SYNTAX of actually telling it to do that.
    I hate to be 'that guy', but it is somewhat urgent. This is for a college assignment due Wednesday (yikes!). I didn't quite know what I was getting myself into with this code, but the end is in sight if I can figure out how to write this particular code.
    Many gratuitous thanks in advance for any assistance!
    PS: It won't be enough to simply add a new filter to the list. The user needs to be able to turn a dial up or down to increase or decrease the High Pass Filter, in conjunction with several other dials manipulating other filters. I need to be able to actually change what the filter's value is.

    Thanks for your help!
    The problem is that I think that I changed the "default" name for the state where the photos were taken. I have 50 differents locations, that are all correct, and photo per photo, I can modify the original location, but only at "local" level.
    How can I change the name displayed in State section as "Casa David i Mireia" for "Catalunya" that is the real name for the State where the photos where taken?
    I don't if this post is comprehensive. I'm not sure.
    Thanks for your time!
    Jordi

  • How do I play slow motion video in real time?

    I accidentally recorded video on my iPhone 5s in slow motion, and now I want to import it into iPhoto and play it in real-time.  How can I do that?

    Thank you for taking the time to contribute. Unfortunately, you are referring to the dekstop version of iMovie - my question specifies iMovie for iPhone (and I asked in the iMovie for iOS forum).
    I would find it hard to believe that Apple included a way to record slow-motion but not be able to get that footage into iMove (iOS App version).
    Thanks.

  • How would I implement a FOR loop in real time?

    I am using a cRIO and would like to have several processes running in parallel.  A main functin will have a loop in it which will count up and an certain time intervals pass data to a parallel process.  I am not sure how LV will check the current time value and determine if it is time to send the parallel process information (it will send the parallel process a command to start at time X and stop at time Y).  I see the code in C as:
    for (i; i <= 60; i++)
         if (i==30)
            Function(1); //send "1" to function to  start action, equivalent of setting a variable in LV and continuously reading that variable in the parallel function
         if(i==45)
            Function(0); //send "0" to function to stop condition
        delay(1second);
    I am confused about how to create a loop that has a predetermined (changeable) time period that allows me to compare the timer to set times (i.e. 30 and 45) and perform a function if they are equal.  I can handle that compare part but I am not sure how to implement the loop.  Any help would be greatly appreciated.

    Hi,
    Why don't you use "Elapsed time.vi" ? Compare it with the time you require. Also you can use register event function to let the other process know a certain condition has occurred.
    Gaurav k:smileyhappy:
    Gaurav k
    CLD Certified !!!!!
    Do not forget to Mark solution and to give Kudo if problem is solved.

  • How do I output to external monitor in real time? Thought FCP6 could.

    I have been looking through the manual for FCP6 and can't seem to find out "HOW" to output HDV through firewire while editing. Thought this was a new feature you would not need an HD card like Kona etc. Is it even possible? or is there more to it than they say?

    IT will, yes. But it will convert the image to a DV image, which is fine for watching, but not at all good for judging the quality of your image or for color correction.
    Giogiangogo gave you a good starting point to look.
    Shane

  • How can i know more trouble shooting issues/Real time problems and thier solutions?

    Hi to every one.
    i am Technician in a reputed mnc company. I am new to Microsoft servers. I learned MCSE 2008 and have basic trouble shooting knowledge.To improve my knowledge on these servers and how can i know real issues in a company occurs , solution to them. Please
    help me to get more knowledge on these servers.
    I am waiting for your reply.
    Thanks  & Regards,
    Praveen

    If you want to know more about issues related to your own internal servers, I'd simply start by reviewing the event logs and running perfmon in the short term to look for issues.  For more long term management and monitoring I'd look to a tool
    like System Center Operations Manager:
    http://technet.microsoft.com/en-us/library/hh205987.aspx
    For general troubleshooting skills growth, I'd stick around these forums and just read issues as they occur and try to assist with resolving some that you feel you can.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications

  • How can I extract the data from a Real-time Execution Trace ".log" file?

    I would like to get the data for the traces from the Real-time Execution Trace toolkit ".log" file to read in Excel and generate a report.

    Hi Chuck,
    Have you tried reading it into a text or binary file first and then generating a report using the Report Generation VIs?
    Ipshita C.
    National Instruments
    Applications Engineer

  • How can I create a Report with LabView Real-Time?

    With conventional LabView, I can create Reports in HTML, for example to document Errors.
    I need this feature in LabView Realtime. Is it possible?

    It is possible, but you got to put a name to the file with an extension of three letters. i.e. errors.htm
    Three letters on the extension is what the RT Operating system allows to use.
    Then you will need to do an ftp to your RT machine and get the file and maybe change the extensions.
    Not all the vis for Report generation can be used in the RT engine. The ones that use ACTIVE X will not work. i.e printting
    Another way to generate reports and the most recommended is to use the host machine to generate the reports.
    Regards,
    Blasioz Valenzuela
    National Instruments

Maybe you are looking for