AE CS6 warning: unable to obtain dynamiclink..
I'm using a pc with windows 64 bit, and get this warning when trying to analyse the footage with either the 3D camera tracker or warp stabilizer. A warning pops up that says, unable to obtain dynamiclink server connection, and the footage does not analyse. The only solution is restarting my machine.. not very time saving.
Also similar issue, when I am working on a comp in AE and go to open the edit in premiere pro, premiere freezes and closes without opening.. only way to fix this is to either restart the machine, or have opened a premiere project before opening an AE comp
Is there a problem with the server connection with the adobe programs and windows, and how do I fix this?
Thank you!
See the suggestions for related problems here:
http://helpx.adobe.com/x-productkb/multi/startup-screen-hangs-premiere-after.html
Similar Messages
-
Unable to obtain dynamiclink server
Hello.
I'm using a windows 8 pc. I think its a 64bit, not sure. but anyways i installed adobe creative cloud. had trouble installing after effects due to internet and such. but eventually i got it downloaded then had trouble actually starting it. ran as administrator and that fixed it. today i tried doing a camera tracker and i got the message "unable to obtain dynamiclink server" and i'm really fustrated, ive dealt with so many issues lately ive almost had enough. Ive look on the forums for answers and saw none. Please help. and if any of you could tell me how i'm supposed to uninstall and reinstall after effects that would be great. cause when it wasn't working i uninstalled it and tried finding the files again that i through in the trash and from then ive had trouble. Point being i'm inexperianced and need assistance. In fact. after effects doesn't even show up in the control panel uninstall. so i'm somehow using it and its not even there...
Best regards, Kyle West
Message was edited by: IrishoffspringRun the cleaner tool and then reinstall if you must:
http://www.adobe.com/support/contact/cscleanertool.html
Won't solve your issue, though, I can tell you that. As we've written like a gigazillion times on this forum, AE not being able to connect to external processes comes down to blockages from virus scanners or general issues with the operating system like specific TCP ports being unavailable due to network configuration and firewall settings. You need to straighten out that part.
Mylenium -
I try to add a 3d camera to a clip but when it analyzes I get unable to obtain dynamiclink server
HHelp please
This issue was discussed in a thread last year, and the resolution at the time was to uninstall After Effects, use the CC Cleaner Tool, then re-install.
-
WARNING: Unable to obtain Perl version on Database Tier
Salam
i receive this error in :
Category: Prep for the Upgrade
Product Family: Review Upgrade Tasks
Task: Update AutoConfig Technology Stack Templates
Step: Verify software versions
by check script ad566s.sh, i found that variable REMOTEPRE_DB is null which i think it should hold 'ssh -l oradb myserver.mydomain'
where this variable is set ?
thank youYou have found a bug in that script.
That "REMOTEPRE_DB" should be "REMOTE115_DB". I will get a bug logged and fixed for MW 2.12.
Thank you for reporting it.
(As a workaround, you may edit the file and replace "REMOTEPRE_DB" with "REMOTE115_DB" everywhere you find it...)
-Vikki
Product and Development Manager for the Maintenance Wizard -
"timed out obtaining dynamiclink server connection" in After Effects
I've seen a lot of other people have this same problem, none of the solutions ive seen are working for me.
Problem appears when i try to track camera, it goes to 'analyzing in background' then after 2 minutes or so it gives me the "timed out obtaining dynamiclink server connection" error pop-up.
Mac OSX 10.7.5
Using Adobe After effects CC
2 x 2.4ghx quad-core intel xeon
15gb ddr3 ram
I've uninstalled Logmein which appeared as a problem in one of the solutions but that hasn't changed anything. Don't have a firewall running. Tried uninstalling After Effects CS6 and After Effects CC and then reinstalling After Effects CC. Dynamiclinkmanager pops up in activity monitor intermittently, it comes and goes repeatedly when i try to 'Track Camera' but never shows any actual use of memory.
Is anyone able to offer help?
Could it be some confusion in preferences / library files between my CS6 installs and CC installs?
Thanks in advanceRefer to this:
http://myleniumerrors.com/2013/01/27/25-101-4/
Mylenium -
REP-0004: Warning: Unable to open user preference file.
Hi,
I am creating an invoice header in Payable through open interface in r12. I have inserted one line in ap_invoices_interface table.
When I run Payables Open Interface Import request, it completes normal but invoice does not create.
Please see below log file and provide your guidence.
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXIIMPT module: Payables Open Interface Import
+---------------------------------------------------------------------------+
Current system time is 24-DEC-2013 12:39:46
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_source='MANUAL INVOICE ENTRY'
p_batch_name='test4'
p_purge_flag='N'
p_trace_switch='N'
p_debug_switch='N'
p_summary_flag='N'
p_commit_batch_size='1000'
p_user_id='19334'
p_login_id='2499994'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8MSWIN1256
Enter Password:
REP-0004: Warning: Unable to open user preference file.
MSG-00000: 0 invoice(s) were created during the process run
MSG-00000: 0 invoice(s) were fetched during the process run
MSG-00000: summarize flagN
MSG-00883: After Repport Trigger: Setting the Org Context to Multiple
Report Builder: Release 10.1.2.3.0 - Production on Tue Dec 24 12:39:47 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Regards
FarooqPlease also see if the following docs help.
R12: Master Troubleshooting Guide for Supplier Contacts Open Interface Import Report (APXSCIMP) [Video] (Doc ID 1373699.1)
R12: REP-0004 Error While Running Supplier Contacts Open Interface Import Program (APXSCIMP) (Doc ID 1195815.1)
R12: APXSUIMP Ends With REP-0004 Error, But Output Does Not Display Reason for Rejection (Doc ID 1060824.1)
Thanks,
Hussein -
HP LJ8000n unable to obtain IP address
We have an old LaserJet 8000n that is unable to obtain an IP address. It has been working for the last 10 or so years. In the last two weeks or so, the printer is unable to get an IP address. I did a cold reset and nothing happens. The printer is setup to use DHCP to obtain IP address. I did also tried putting the IP address in manually but that does not work either. Below is the JetDirect configuration page printout.
Any help/suggestion is much appreciated.This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
Warning: Unable to create new entry, caught: "javax.ejb.CreateException", message is: "Error creating EntityBean: Io exception: The Network Adapter could not establish the connection".
while executing JSP:<%
* add.jsp
* Adds a new entry through EmployeeBean. This is a JSP that serves 2
* functions. First of all, when called with no arguments, it will display a
* table with a few input fields. The user should enter empNo, empName and
* salary of the new record to be added. When she submits this
* information, it is sent to this page again. If it is successful, then the
* user can continue adding new entries. If it is not, then the old data will
* be displayed, and a warning message will be shown to her.
%>
<%@ page import="com.webstore.*,java.io.*,java.util.*,javax.naming.*" %>
<%
// Make sure this page will not be cached by the browser
response.addHeader("Pragma", "no-cache");
response.addHeader("Cache-Control", "no-store");
// We will send error messages to System.err, for verbosity. In a real
// application you will probably not want this.
PrintStream errorStream = System.err;
// If we find any fatal error, we will store it in this variable.
String error = null;
// In a moment we will check if all columns were passed to this page
String param_1 = "";
String param_2 = "";
String param_3 = "";
long dptNo = 0;
String dptName = null;
// This variable indicates what function of this page is currently used. If
// this page is called with parameters, then a new entry should be
// added. In that case this variable is true.
boolean submitting = false;
// We will first attempt to get the reference to EmployeeHome from the
// session. The "list.jsp" page sets this attribute in the session.
DepartmentHome home = (DepartmentHome) session.getAttribute("DepartmentHome");
if (home == null) {
error = "No previous connection to DepartmentBean.";
} else {
// Attempt to get all 3 parameters from the session
param_1 = request.getParameter("DPTNO");
param_2 = request.getParameter("DPTNAME");
// If all 3 parameters are specified, then this is probably a submission by
// this very page. Note that if the user left one of the fields blank, then
// the corresponding parameter will be "", not null.
if (param_1 != null && param_2 != null) {
param_1 = param_1.trim();
param_2 = param_2.trim();
submitting = true;
// In the following variable we will store a (non-fatal) warning message. This
// message will be displayed in the page, but so will the submission form.
String warning = null;
if (submitting) {
warning = "";
// If there is an empty param_1, param_2 and/or param_3, then this will be noted
// in the warning message.
if ("".equals(param_1)) {
warning = "Null param_1 specified. ";
if ("".equals(param_2)) {
warning += "Null param_2 specified. ";
// If we don't have a warning message yet, then we will attempt to create
// a new record.
if ("".equals(warning)) {
try {
dptNo = (long)Long.parseLong(param_1);
dptName = new String(param_2);
Department rec = (Department) home.create(dptNo);
rec.setDptname(dptName);
// empty columns after insert for effect
param_1 = "";
param_2 = "";
// If we got this far, then there was no problem detected.
warning = null;
} catch (Exception e) {
// Set the warning variable to indicate a problem.
warning = "Unable to create new entry, caught: \"" +
e.getClass().getName() + "\", message is: \"" +
e.getMessage() + "\".";
// Decide what the title will be.
String title;
if (error != null) {
title = "Error";
} else {
title = "com.webstore | Add entry";
%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dtd">
<HTML>
<HEAD>
<TITLE><%= title %></TITLE>
</HEAD>
<BODY bgcolor="#FFFFFF">
<H1><%= title %></H1>
<%
// If there was a fatal error, then display the error message
if (error != null) {
%>
<P><BLOCKQUOTE><%= error %></BLOCKQUOTE>
<%
// Otherwise display a table with fields to be filled in.
} else {
// If there was a warning, then display it.
if (warning != null) {
%>
<TABLE border="1" bgcolor="#FF2222">
<TR><TD><FONT color="#FFFFFF"><STRONG>Warning: <%= warning %></STRONG></FONT></TD></TR>
</TABLE>
<%
} /* if */
// Display the table with fields. There are two columns. The left column
// contains the names of the fields, while the right column contains the
// fields.
%>
<FORM action="dptadd.jsp" method="GET">
<P><TABLE border="1">
<TR>
<TD><STRONG>DptNo:</STRONG></TD>
<TD><INPUT type="text" name="DPTNO" value="<%= param_1 %>"></INPUT></TD>
</TR>
<TR>
<TD><STRONG>DptName:</STRONG></TD>
<TD><INPUT type="text" name="DPTNAME" value="<%= param_2 %>"></INPUT></TD>
</TR>
<TR>
<TD colspan="3" align="center"><INPUT type="submit" value="Add this entry"></INPUT></TD>
</TR>
</TABLE>
</FORM>
<%
} /* else */
%>
<P><TABLE border="1">
<TR><TD>Back to list</TD></TR>
</TABLE>
</BODY>
</HTML>
Please guide me..Rajive,
This is the same problem as in your other post:
sql is running very slow
So please refer to my answer there.
Good Luck,
Avi. -
Hello,
I had a server crash recently and our outsource hosting tech support suggested applying Cumulative Upade 12 for SQL server 2008R2 SP2 to fix the issue. The exception from our dump file "Warning: Unable to Verify TimeStamp for Path\ProgramName"
is not in the list of hotfixes for this CU. Do you know if this will fix this issue? The CU warns not to apply the CU if your issue id not addressed by the CU. Here is a portion of the dump file with the relevant error:
This dump file has an exception of interest stored in it.
The stored exception information can be accessed via .ecxr.
(7e8.2ab4): Unknown exception - code 000042ac (first/second chance not available)
ntdll!NtWaitForSingleObject+0xa:
00000000`777412fa c3 ret
0:240> .sympath srv*c:\Websymbols*http://msdl.microsoft.com/download/symbols;
Symbol search path is: srv*c:\Websymbols*http://msdl.microsoft.com/download/symbols
Expanded Symbol search path is: srv*c:\websymbols*http://msdl.microsoft.com/download/symbols
0:240> .reload /f
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\sqlservr.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlservr.exe
..........Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\sqlos.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlos.dll
...............Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\opends60.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for opends60.dll
.......Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\BatchParser.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for BatchParser.dll
....Unable to load image C:\Program Files\Microsoft SQL Server\100\Shared\instapi10.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for instapi10.dll
*** ERROR: Module load completed but symbols could not be loaded for instapi10.dll
..Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\Resources\1033\sqlevn70.rll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlevn70.rll
*** ERROR: Module load completed but symbols could not be loaded for sqlevn70.rll
Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.
.................Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\ftimport.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ftimport.dll
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\msfte.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for msfte.dll
*** ERROR: Module load completed but symbols could not be loaded for msfte.dll
...........Unable to load image C:\Windows\System32\sqlncli10.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlncli10.dll
...Unable to load image C:\Windows\System32\1033\SQLNCLIR10.RLL, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SQLNCLIR10.RLL
*** ERROR: Module load completed but symbols could not be loaded for SQLNCLIR10.RLL
..Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\xpsqlbot.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for xpsqlbot.dll
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\XPStar.DLL, Win32 error 0n2
*** WARNING: Unable to verify timestamp for XPStar.DLL
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\sqlscm.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlscm.dll
...*** ERROR: Module load completed but symbols could not be loaded for odbcint.dll
...Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\Resources\1033\XPStar.RLL, Win32 error 0n2
*** WARNING: Unable to verify timestamp for XPStar.RLL
Thank you,
Steve -The error message appears to be related to a debug session and not come from the actual crash.
So all I know is that you hade a server crash. I don't even know exactly what that means. Did Windows bite the dust? Or was it only SQL Server?
Assuming the latter, I would expect the SQL Server errorlog to have some information (and that would be ERRORLOG.1 or earlier, since the server have been restarted), but if SQL Server died the output may be incomplete.
There may be also dump files, but as I rarely look into these, I am not sure how to interpret them. But I am quite confident that "Unable to verify TimeStamp..." is not the reason SQL Server went down.
I would suggest the following course:
* If the server is not critical, do nothing. As long as it has onlyl happened once, it has only happened once.
* If the server is critical, open a case with Microsoft if you are not able to figure out the reason yourself. The key here is "Unknown exception - code 000042ac".
* If it happens again, you should absolutely open a case. An important thing here is whether the stack dump is identical or something different. If the stack dumps are identical, you may have hit a bug in SQL Server or the OS, and applying CUs or OS
fixes could help if it is a known issue. If the stack dump is something else, you have ghosts in the machine - that is, bad hardware.
Erland Sommarskog, SQL Server MVP, [email protected] -
I dowloaded photoshop CS6 am unable to access for the exercises required of course
I downloaded photoshop CS6 am unable to access for the exercises required of course
And exactly what is it that you are trying to tell us? You're making no sense whatsoever. Clarify - preferrably in comprehensible English.
Mylenium -
REP-0004 warning: Unable to open user preferance files
Hi,
I am new to R12. This is the upgradation project 11.5.1.2 to R12. we are newly installed the R12 application and 10g database.
I am going to customize the standard report 'Printed Purchase Order Report', the rdf file is 'POXPRPOP'. but it is not getting any out put and xml tags also. even standard report also not getting any output and I noticed in logfile that the error like 'REP-0004 warning: Unable to open user preferance files'.
I have tested in backend, its getting the data. then I have added command MO_GLOBAL.SET_POLICY_CONTEXT('S'.org_id) in before report trigger also. but getting same issue.
Could you please help me wheather I need do any setups/modifications in RDF or Application. This is very urgency.
Thanks in Advance.
Regards,
ThirupathiHi Hussein,
Thank you for your valuable response.
I have followed the same steps for this customization what they are given in the metalink ID 374165.1.
And one more thing, I am not getting any output if i ran the standard program 'Printed Purchase Order Report (Portrait)' in R12. what it could be the problem.
Regards,
Thirupathi -
Problem configuring SSO: "Oracle SSO Warning - Unable to process request"
I'm having difficulty getting a sample application to work with SSO, and I was hoping someone could point me in to the right direction.
We've got 2 separate systems, call them ASserver and SSOserver. ASserver is running Oracle 9i AS, SSOserver is the infrastructure server (e.g. OID and SSO).
The application runs just fine on ASserver without SSO.
I made the change to mod_osso.conf so that the URL for the application is now protected, and added a partner application entry to the application (more on that in a moment).
When I go to the URL for the partner application, the browser is properly redirected to the SSO server and I am prompted to log in. After logging in, I get an error page with the error "Oracle SSO Warning - Unable to process request" (the URL is something like http://<ASserver>/osso_login_success?urlc=... etc).
Several questions:
- can my servlet just be a plain servlet, or does it need to do the various things described in the "SSO Application Developer's Guide"?
- when configuring the partner application on the SSO server, are success url and logout url supposed to be the osso_login_success and osso_logout_success URLs? Should they be on the ASserver or the SSOserver?
Any other recommendations?
Thanks,
dwhOkay, solved. I am pretty sure I was suffering from the condition described in metalink Note:227221.1, "Oracle SSO Warning Logging On to Midtier Using Mozilla Based Browser" (http://metalink.oracle.com/metalink/plsql/ml2_documents.showNOT?p_id=227221.1)
although it was happening in IE as well.
Essentially, I modified the entry for the partner application to change the port numbers from 7778 to 7777, and now it works.
I think I also had several entries for the app server in the SSO server, and I don't know which one it was using. I got rid of all of them except the one named <oraclehome>.<restofdomain>, e.g. oas.foobar.com, where "oas" is the name of my app server's Oracle home. -
HI! I need to obtain a receipt for my yearly fee for my adobe account. I went into my settings and I am unable to obtain a copy of a receipt. I do see my billing information, but I'm unable to obtain a receipt. Please advise.
Hi jennys8380407,
Can you please elaborate on what you mean by "unable to obtain a receipt"? Are you not able to see the invoices for your payments? Or are you unable to print them? It sounds like you have followed the steps outlined here: Print a payment receipt or invoice | Creative Cloud--can you tell me what you do see when you look at the subscriptions listed on your account?
Best,
Sara -
Warning Unable to open /opt/coldfusion8/runtime/lib/license.properties
This error cames up every day in the log files. Do I need a new license or to update? I believe this is version 8. I am aware there are newer versions available. The process appears to stop after a certain number of days with the error being in the log every day. Here is the latest two log entries:
07/27 03:01:18 error A License exception has occurred.
coldfusion.license.LicenseManager$LicenseIllegalAccessException: A License exception has occurred.
at coldfusion.license.LicenseManager.byte(Unknown Source)
at coldfusion.license.LicenseManager.checkJSP(Unknown Source)
at coldfusion.license.JspLicenseServlet.service(Unknown Source)
at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:284)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
07/27 03:14:19 Information [scheduler-2] - Run Client Storage Purge
07/27 04:21:19 Information [scheduler-1] - Run Client Storage Purge
07/27 05:28:19 Information [scheduler-2] - Run Client Storage Purge
07/27 06:35:19 Information [scheduler-0] - Run Client Storage Purge
07/27 07:42:19 Information [scheduler-2] - Run Client Storage Purge
07/27 08:49:19 Information [scheduler-2] - Run Client Storage Purge
07/27 09:56:19 Information [scheduler-1] - Run Client Storage Purge
07/27 11:03:19 Information [scheduler-1] - Run Client Storage Purge
Starting Macromedia JRun 4.0 (Build 108487), coldfusion server
At this point there is some process or app that is taking all the CPU bandwidth which stops all processes. (This is a virtualized installation.)
The server needs to be restarted and ColdFusion re-started after the server has re-initialized itself. I am wondering whether the license exception is the cause of the hang on the system. After restarting the server and then re-starting ColdFusion today, the following entries were made in the cfserver.log file (there were no entries in the server log at all):
07/28 09:12:53 warning Unable to open /opt/coldfusion8/runtime/lib/license.properties
07/28 09:12:54 info JRun Naming Service listening on *:2930
07/28 09:12:54 info No JDBC data sources have been configured for this server (see jrun-resources.xml)
07/28 09:12:54 info JRun Proxy Server listening on *:51800
07/28 09:12:54 info Deploying enterprise application "Adobe_ColdFusion_8" from: file:/opt/coldfusion8/
07/28 09:12:55 info Deploying web application "Adobe ColdFusion 8" from: file:/opt/coldfusion8/
07/28 09:12:56 INFO License Service: Flex 1.5 CF Edition enabled
07/28 09:12:56 INFO Starting Flex 1.5 CF Edition
07/28 09:12:57 user JSPServlet: init
07/28 09:12:57 user ColdFusionStartUpServlet: init
07/28 09:12:57 user ColdFusionStartUpServlet: ColdFusion: Starting application services
07/28 09:12:57 user ColdFusionStartUpServlet: ColdFusion: VM version = 1.6.0_01-b06
07/28 09:12:57 Information [main] - Starting logging...
07/28 09:12:57 Information [main] - Starting license...
07/28 09:12:58 Information [main] - Standard Edition enabled
07/28 09:12:58 Information [main] - Starting crypto...
07/28 09:12:58 Information [main] - Starting security...
07/28 09:12:58 Information [main] - Starting scheduler...
07/28 09:12:58 Information [main] - Starting WatchService...
07/28 09:12:58 Information [main] - Starting debugging...
07/28 09:12:58 Information [main] - Starting sql...
07/28 09:12:58 Information [main] - Pool Manager Started
07/28 09:12:58 Information [main] - Starting mail...
07/28 09:12:58 Information [main] - Starting runtime...
07/28 09:12:59 Information [main] - CORBA Configuration not enabled
07/28 09:12:59 Information [main] - Starting cron...
07/28 09:12:59 Information [main] - Starting registry...
07/28 09:12:59 Information [main] - Starting client...
07/28 09:12:59 Information [main] - Starting xmlrpc...
07/28 09:12:59 Information [main] - Starting graphing...
07/28 09:12:59 Information [main] - Starting verity...
07/28 09:12:59 Information [main] - Starting archive...
07/28 09:12:59 Information [main] - Starting document...
07/28 09:12:59 Information [main] - Starting eventgateway...
07/28 09:12:59 Information [main] - Starting Event Backend Handlers.
07/28 09:12:59 Information [main] - Initialized EventRequestDispatcher with a Thread Pool size of 1.
07/28 09:12:59 Information [main] - Initializing EventRequestHandler
07/28 09:12:59 Information [main] - Starting Event Gateways.
07/28 09:12:59 Information [main] - Starting FlexAssembler...
07/28 09:12:59 Information [main] - Starting .NET...
07/28 09:12:59 Information [main] - Starting Monitoring...
07/28 09:12:59 Information [main] - ColdFusion started
07/28 09:12:59 user ColdFusionStartUpServlet: ColdFusion: application services are now available
07/28 09:12:59 user CFMxmlServlet: init
07/28 09:12:59 user CFMxmlServlet: Macromedia Flex Build: 87315.134646
07/28 09:12:59 INFO Macromedia Flex Build: 87315.134646
07/28 09:13:01 user CFSwfServlet: init
07/28 09:13:02 user CFCServlet: init
07/28 09:13:02 user FlashGateway: init
07/28 09:13:02 user MessageBrokerServlet: init
07/28 09:13:03 user CFFormGateway: init
07/28 09:13:03 user CFInternalServlet: init
Server coldfusion ready (startup time: 10 seconds)
Thank you for any guidance you can share with me. I am new at using this product.The license.properties error is standard for CF. This file
will be found in coldfusion8/lib as the server starts up. But
clearly you have other issues. Why the deployer service is not
running is the real issue. Check your logs under coldfusion8\logs
and coldfusion8\runtime\logs. If this is a new install, you may
want to just uninstall and reinstall. -
Applet throws "Unable to obtain Document object"
Hello,
I have an applet in a html-page and a link to show the applet (in a later version this should be a menu with links to different applets).
If I click very often (click,click,click,click) on the link I get an exception (see below).
Used environment:
- Windows 2000 English
- Internet Explorer 6
- Java(TM) Plug-in: Version 1.4.2, Using JRE version 1.4.2 Java HotSpot(TM) Client VM
Here are my 4 tiny source-codes:
1. My test Applet:
import java.util.*;
import javax.swing.*;
public class BigApplet extends JApplet {
Vector vec = new Vector();
public void init() {
this.getContentPane().add(new JLabel("BigApplet"));
for (int i = 0; i < 10; i++) {
vec.add(new Object[250000]);
}And 3 HTML-Pages:
2. Frame.html
<html>
<frameset cols="80,*" frameborder="NO" border="0" framespacing="0">
<frame src="link.html" name="menuFrame" noresize marginheight="0" marginwidth="0">
<frame name="applet" noresize marginheight="0" marginwidth="0">
</frameset>
</html>3. Link.html
<html>
<a href="applet.html" target="applet">Applet</a>
</html>4. Applet.html
<applet code="BigApplet.class" codebase="bin" />The three html pages are in the same directory and the BigApplet.class is in the bin-folder of this directory.
If I start the frame.html from Explorer and than click very fast (about 5 to 10 times) on the link to the applet I get this exception:
netscape.javascript.JSException: Unable to obtain Document object
at sun.plugin.AppletViewer.getDocumentBase(Unknown Source)
at sun.plugin.AppletViewer.getCodeBase(Unknown Source)
at sun.plugin.AppletViewer.appletInit(Unknown Source)
at sun.plugin.viewer.LifeCycleManager.initAppletPanel(Unknown Source)
at sun.plugin.viewer.IExplorerPluginObject$Initer.run(Unknown Source)If the applet is delivered by a webserver (tried IIS and Apache) the Internet Explorer crashes without a message. In that case I get a different exception (found in the log file of the java console):
java.lang.NullPointerException
at sun.plugin.util.URLUtil.canonicalize(Unknown Source)
at sun.plugin.AppletViewer.getDocumentBase(Unknown Source)
at sun.plugin.AppletViewer.getCodeBase(Unknown Source)
at sun.plugin.AppletViewer.appletInit(Unknown Source)
at sun.plugin.viewer.LifeCycleManager.initAppletPanel(Unknown Source)
at sun.plugin.viewer.IExplorerPluginObject$Initer.run(Unknown Source)Any idee what to do to be sure that an user can not produce this error?
Bye
ThomasHello, I am getting the same error under different circumstances. No clicking is involved. What I need to know is what causes the error? Anyone know?
And levi_h - the end users of applets often get impatient when they don't see immediate results and will click and click and click and click, thinking that somehow they are helping the situation. You may feel they deserve to be punished, but the powers that be who are the customers who will deploy our applets don't feel that way at all, and they are the ones that pay our salaries and allow us to be sheltered, clothed, fed and send our kids to college!
Maybe you are looking for
-
How to find the OBIEE report (Catelogue) path from BI enabled excel sheet
Dear All, I have an excel sheet where the data is coming from BI server. How can I find the BI report name and path from the excel sheet. Regards Mustafa
-
Hi All, I have multiple issues related to Limit or service purchase orders in SRM 4.0. We are in extended classic scenario and service pack 12. 1. When try to Limit SC in full functionality BBPSC01, after adding limit line to SC not able to find "Fol
-
Can't go to recovery mgr, boots without it-won't use the recovery cds
I wanted to restore my hp pavilion dv6000 back to its original condition, but it won't go into recovery mgr (f11) at all. And I bought a cd recovery mgr a few years but come to find out it won't work because I'm on a 64-bit machine. I Tested everythi
-
Anyone added a modem to M4000 / SUN M5000 servers - via xscf or other ?
Hi, Have any of you lads attempted to add a std analogue modem to an M class server, on older sun boxes the procedure is clear [ dedicated serial port, use tip with standard settings ] But for modern servers, cannot find any documentation on sunsolve
-
My question was already detailed: If I post a Word document on my website, I want to share the link. Firefox won't let me do that. It forces me to download the document. It won't go to the link. How can I get it to do that? Can I? Here's an example.